Clone between data centers and through the firewall?
I have a VC that manages 8 virtual data centers. Some of these data centers are on a dish network, and some are in a demilitarized zone. Even if the storage is NOT shared between data centers, I am able to clone a VM between data on food networks centers but I cannot clone between a data center on a dish network and the other in a demilitarized zone.
Is there a specific port that must be open to clone through a firewall, or I wouldn't be able to do this.
________________________________
Jason D. Langdon
The file copy occurs using port TCP/UDP 902, as all communications from ESX.
Do you have any NAT between the servers ESX and vCenter?
Marcelo Soares
VMWare Certified Professional 310/410
Master virtualization technology
Globant Argentina
Review the allocation of points for "useful" or "right" answers.
Tags: VMware
Similar Questions
-
The game I play is Combat arms, I gave it through the firewall but I still have to allow him, and in the end, the combat arms stops responding and closes due to the DEP (Data Execution Prevention). I leave on the DEP list. Please help me.
Hi Brainiac107,
1 when was the last time it was working fine?
2. did you of recent changes on the computer?
Method 1
Check and make sure that you have followed the method to allow the game through the protection of execution of data (DEP) below.
"" "" "a) departure ' Run ' sysdm.cpl ' click 'Advance' tab" now click on 'Settings' running ' then click on the "Data Execution Prevention" tab
(b) now click on the "turn on DEP for all programs and Services except those I select:
(c) then click add and go to and select C:\Nexon\Combat Arms\engine.exe
(d) now, click Ok then apply.
(e) restart the computer.
Change Data Execution Prevention settings
http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings
Change Data Execution Prevention settings
http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings
Method 2
If the previous step fails, then try to run the game with administrator privileges and check if it works.
(a) right to the shortcut from the game or if you try to install the game, right click on the game setup.
(b) click on run as administrator.
Method 3
If you're still having problems with the game then post your request in the forums of game seller.
http://Forum.NEXON.NET/CombatArms/forums/8624/ShowForum.aspx?PageIndex=2&SB=0&d=1&DF=11
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have a website www.rsdworld.com. I tried to establish a webdisk or connecton on the network's website. I get an error asking that I ensure ports are allowed through the firewall or the folder cannot be created. This becomes agrivating. I had no problem installing a webdisk on my XP.
Hello canmandom,
You will need to check with Webdisk to see if it is compatible with Windows Vista.
Check the system requirements.Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Is it possible to migrate ESXi host between data centers, if so please provide a brief not
Hi friends,
1. is it possible to migrate ESXi host between data centers, if so please provide a brief walking distance.
2 can we perform vMotion and Storage vMotion while ESXi is turned on.
3. is it possible to extend the VMDK disk while it integrates snapshots in it.
Best regards,
Sirot Vijay
Yes the vmotion and svmotion works but one by one.
1 - vmotion is posssible to power on State, but you can't svmotion the vm simultaneously. The storage will remain same
2 svmotion is also possible to power on the State, but you cannot vmotion virtual machine simultaneously. the host will remain the same.
3 vmotion and svmotion is possible together when the vm is off power. the host and storage can be changed simultaneously on this State.
-
Heart rate between data centers
Hello
I made a VMware installation only when we have two datacenters with a host and a disk on each data center system, vi have 2 x 4 GB FC between data for the availability of the storage centers and we have 2 x 1 Gbit L2 connections between data (network, vmotion and HB) centers.
Now my problem is pulsation HA making only redundant you normally just add two natachasery to the switch, but in my case I need to run my heart rate on two different VLANS to ensure that it also works on different connections between data centers.
If I just add another service console and configure a new vlan with default gateway, dose anyone know if it will work?
Daniel
Hi Daniel,.
Welcome to the forums.
You can take a look at the following KB on the Service Console redundancy for VMware High Availability.
It will be useful.
Concerning
Franck
-
HP Pavilliona6512p: should I allow telus mobile cdma through the firewall
. I found that I had an open gate that was puttibg info at risk. Should I allow telus mobile cdma through the firewall?
Brihayes67, welcome to the forum.
What I read of Telus CDMA network is closing this year. If you don't have any use for it, I would not in it.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
problem with allowing msn games through the firewall
Having problem to msn games through the firewall.
Hi JohnLanham,
The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.
1. What is the problem exactly are you facing on MSN games?
2. you receive an error message/code?
3. firewall is blocking MSN games?
If the firewall is blocking MSN games see this help article and check if it helps.
Allow a program to communicate through Windows Firewall
http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall
Response with more information to help you.
-
How can I see the list of programs that are allowed through the firewall?
How can I see the list of programs that are allowed through the firewall? I can't find the list.
Open Windows Firewall and select 'allow a program or feature through Windows Firewall. You can then view or modify programs all allowed.
Jim
-
I lost the connection to Windows 2003 server and through the connector.
I lost the connection to Windows 2003 server and through the connector.
original title: WHS connector has stopped working.Hi Mjopritchard,
The question you have posted is related to Windows Home server and would be better suited to the Windows Home server community.
Please visit the following link to find a community that will support what ask you: -
Dear administrators,
I created the user but now I have a requirement for the granting of privileges to view all objects in the DB in the data base and discovers the DOF for each.
Any help please
Ritz
Thanks to advise all the
-
ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine
Objective: move vmdk to store data with adequate storage and then increase storage D: 20G to 100G
Converter is not available on this architecture. Can I migrate cold vm to the different data store, no prob.
Question: Without use of the converter, method 3 can be used without a secondary vm? In other words, just by using target vm offline, online, offline? Or is it a problem of signing/OS disk on the Windows Virtual PC?
I need to move vmdk in different LUN and extend drive vm windows on D: (non-OS drive). Is this possible via the single procedure? Options?
To use method 3 to http://communities.vmware.com/thread/81121 requires available vm 'secondary', I did not.
Method 3? Using of vmkfstools and another VM of Windows to extend a drive
o stop the VM to resize
o log in the console ESX Server via Putty
o Type? vmkfstools? X & lt; new size of drive & gt; vmfs/volumes / & lt; storage volume name & gt;. / & lt; virtual server name & gt;. / & lt; the virtual disk name & gt;? That is to say. /vmfs/volumes/Storage1/my_vm.VMDK new disk size can be specified in kilo, mega, or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk of 20 GB of 24GO you would put 24000 m or 24g
o the second virtual machine to help stop
o change the second virtual machine settings and add the first virtual machine hard drive
o power on the second VM and load the disk management snap-in and verify that the first virtual machine disk has unallocated on it space
o select Start, run and enter diskpart.exe
o the command? the list of volume? This will show you all the volumes.
o select your volume based on the results of the list volume command, IE. ? Select volume 1?
o type the command? extend? to extend the volume
o check again the disk management snap-in and the volume is expected to be expanded with a greater ability
o stop the second VM and remove (do not remove) the record of it
o turn your first VM and the new space should be there and ready to use.
Also, I'm already aware of Dell extpar:
http://www.RTFM-ed.co.UK/?p=1310
for VI3, vmoiton of storage is made by RCLI plugin or a 3rd party
I prefer the plugin
In addition, if the option to increase the size of the disk in the VIC is grayed out, it sounds like a permissions issue. Finally, you can not extend the disc using the VIC, if the customer in question has a snapshot.
-
I purchased Mikrotik hardware devices and want to use routeros seat firewall cisco asa establish VPN. Aims to establish that a branch may be two IPSEC VPN access devices at the headquarters of the server via the public network.
But now, I'm having some trouble, so I have cisco asa branches and headquarters to establish successful ipsec vpn.
(1) branch routeros WAN port using a private IP address and is a member of the asa above outdoor sound created vpn ipsec, vpn successfully established internal servers and I ping the switch at the headquarters of the branch. However, there is a problem, I go through routeros visit that the headquarters of the https server pages can not be opened, telnet internal switches can telnet to the top, but were unable to penetrate into the character.
(2) in addition, I left the branch routeros on a public IP address WAN port and asa VPN IPSEC created seat, said problems above are not, the server can also be accessed, telnet switch can also enter text and control.
At the present time, I have encountered this problem of interface not CAN not because I need to create of very, very many industries and the need to establish headquarters communications branch offices so I have to use private IP addresses to access the Wan, unable to do wan are public IP address and headquarters to establish IPSEC VPN.now, I can't telnet asa inside the cisco router and open the web inside https, I can't solve the problems.
now, registrants of asa:
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 49.239.3.10 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 172.17.0.111 255.255.255.0network of the object inside
172.17.1.0 subnet 255.255.255.0
network outsidevpn object
Subnet 192.168.0.0 255.255.0.0QQQ
NAT (inside, outside) static source inside inside destination static outsidevpn outsidevpn non-proxy-arp-search to itinerary
Route outside 0.0.0.0 0.0.0.0 49.239.3.1 1
Route inside 172.17.1.0 255.255.255.0 172.17.0.5 1Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 cisco
Crypto ipsec pmtu aging infinite - the security association
Crypto dynamic-map cisco 1000 set pfs
Crypto dynamic-map cisco 1000 set transform-set cisco ikev1
Crypto dynamic-map cisco 1000 value reverse-road
Cisco-cisco ipsec isakmp dynamic 1000 card crypto
cisco interface card crypto outside
trustpool crypto ca policy
Crypto isakmp nat-traversal 60
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400IPSec-attributes tunnel-group DefaultL2LGroup
IKEv1 pre-shared-key *.Hello
Could you share the output of the counterpart of its IPSec cry see the 49.239.3.10 of the other device?
Kind regards
Aditya
-
Copy of models between data centers
Hello
I have a couple of VM being cloned to models. These models need to be copied in other data centers VMWare. I got it all to a using PowerCLI PowerShell script. If I understand well I can't do just a simple copy of a data center to another. First of all, I need to upload the template, then download to the data center target to get these models where they do.
Does anyone have an idea how I could do this task and it is able to be accomplished using PowerCLI?
TIA
OK, you could do something in this direction.
$vmName = "MyVM.
$templateName = "template".
$tgtDC = "dc".
$dc = get-data center-name $tgtDC
# Get the VM source
$vm = get-VM-name $vmName
# Clone VM and move it to the target DC
New-VM - $vm - name $templateName VM | Move-VM-Destination $dc
# Convert the VM cloned a model of
Get-VM-name $templateName | Set-model
-
Splitting licenses between data centers
Question about licenses for separation between the data centers
EXAMPLE OF
License is good for 30 CPU; s
DC-1
host one gets 2
host b gets 2
c host gets 2
DC - 2
host a get 4
host b get 4
DC-3
host a get 8
host b gets 8
Perfectly legal or?
Also - if you have 20 2 CPU licenses can we swap to 1 20 CPU license? Actually more simple license management.
From a technical point of view, you can combine or divide licenses required in your My VMware portal. However, there may be legal restrictions, such as the use of licenses in the regions and counties other than where the licenses were purchased.
André
-
We are constructing a new environment VI 3.5 that will match our new approved conformity existing SOPS all of the virtual machine in the environment will have to be moved off the power as soon as the new cluster\datacenter is built. I am trying to determine the practical way of best\most to do - what I'm basically not clear is if I can migrate a virtual machine between 2 data centers or not.
Any help on how best to do that is very appreciated-
Steve
wouldn't that be nice. You can always stop the virtual machine and a cold migration.
Maybe you are looking for
-
two-factor authentication is not available for your apple at the moment ID
(two-factor authentication is not available for your apple at the moment ID), how can I solve this problem? I can't run many features such as Apple Watch unlock in Sierra, please help
-
How to get full screen Fennec for android project source code?
Hello First of all, I'm sure that it wasn't the right category to post this question, but I couldn't really understand better. I hope that you will be moving to a better place. We would like to take advantage of Fennec with HTML5 framework by wrappin
-
HP255 G3 NOTEBOOK: NO SOUNDS
Hi, have lost all sound, checked in playback devices but don't get "no audio device found"... have you tried the convenience store but it does indicate no problems found! Also the mute button F6 does not shine now. "What I have to download something,
-
ProBook 6545b: where can I find a replacement battery?
I need to buy another battery of the BIOS, but can't find it on the HP website. Any ideas? Thank you. Jeff W
-
I'm unable to send emails. error 0X800LCC0E
I get an error message: Protocol: smtp. error secure socket (SSL) No. 25, port: 10013, error 0X800LCC0E. It started only recently. We are traveling and use wifi in different places. I tried several recommendations on this site without success.