HP Pavilliona6512p: should I allow telus mobile cdma through the firewall

Similar Questions

• Allow Cisco VPN Client through the firewall?

  Hello

  How can I allow a cisco VPN client work from the inside of our network to an external IP address?

  We have customers who wish to make use of their Cisco VPN Client companies but our ASA blocks I think?

  Also (sorry to ask) a friend in South America is having the same problem but I am not hink they use Cisco, is there a default port used by the client to Cisco? then I can send this info?

  Thank you

  Generally, the ASA will allow the IPSEC from the inside to outside traffic. This is when you want it came outside and connect to you - this is where it gets creative. You restrict outgoing traffic at all? You deny all ip/tcp/udp outgoing?

  But may depend on if the remote end is compaitable NAT - T, and if they have configured. Another question would be how they allow VPN traffic go?

• The game I play is Combat arms, I gave it through the firewall but I still have to allow him, and in the end, the combat arms stops responding and closes due to the DEP. I have it enabled on DEP. Please help me.

  The game I play is Combat arms, I gave it through the firewall but I still have to allow him, and in the end, the combat arms stops responding and closes due to the DEP (Data Execution Prevention). I leave on the DEP list. Please help me.

  Hi Brainiac107,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  Method 1

  Check and make sure that you have followed the method to allow the game through the protection of execution of data (DEP) below.

  "" "" "a) departure ' Run ' sysdm.cpl ' click 'Advance' tab" now click on 'Settings' running ' then click on the "Data Execution Prevention" tab

  (b) now click on the "turn on DEP for all programs and Services except those I select:

  (c) then click add and go to and select C:\Nexon\Combat Arms\engine.exe

  (d) now, click Ok then apply.

  (e) restart the computer.

  Change Data Execution Prevention settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

  Change Data Execution Prevention settings

  http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings

  Method 2

  If the previous step fails, then try to run the game with administrator privileges and check if it works.

  (a) right to the shortcut from the game or if you try to install the game, right click on the game setup.

  (b) click on run as administrator.

  Method 3

  If you're still having problems with the game then post your request in the forums of game seller.

  http://Forum.NEXON.NET/CombatArms/forums/8624/ShowForum.aspx?PageIndex=2&SB=0&d=1&DF=11

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install a webdisk on vista home 32-bit top of the system. I allowed the site through the firewall with ports 2077 and 2078.

  I have a website www.rsdworld.com. I tried to establish a webdisk or connecton on the network's website. I get an error asking that I ensure ports are allowed through the firewall or the folder cannot be created. This becomes agrivating. I had no problem installing a webdisk on my XP.

  Hello canmandom,

  You will need to check with Webdisk to see if it is compatible with Windows Vista.
  Check the system requirements.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• problem with allowing msn games through the firewall

  Having problem to msn games through the firewall.

  Hi JohnLanham,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. What is the problem exactly are you facing on MSN games?

  2. you receive an error message/code?

  3. firewall is blocking MSN games?

  If the firewall is blocking MSN games see this help article and check if it helps.

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Response with more information to help you.

• How can I see the list of programs that are allowed through the firewall?

  How can I see the list of programs that are allowed through the firewall?  I can't find the list.

  Open Windows Firewall and select 'allow a program or feature through Windows Firewall. You can then view or modify programs all allowed.

  Jim

• InDesign CS5 for windows only allow me to scroll through the functions with the mouse wheel

  Nice day

  InDesign CS5 for Windows only allow me to scroll through the functions with the mouse wheel and for example not allow me to access drop down menus, any help will be much appreciated

  https://helpx.Adobe.com/InDesign/KB/InDesign-tools-panels-Don ' t - respond.html

• New guideline of Apple cannot allow ADF Mobile to publish the application in the store in February

  Hi guys,.

  I saw a new rules that sent to the IOS Developer any delay to February 1, 2014 for submission apply new/updated App Store must generate in XCode5 and optimized for iOS7 SDK

  And the current version of the ADF doesn't support or XCode 5 and iOS Mobile 7 SDK.

  Then my current app in the App Store will be a risk with us because we are planning to update the application in the next phase in this month of February.

  So, please fix as soon as possible.

  Ref: https://developer.apple.com/news/

  Hello

  just as an fyi: we are currently working on a new game Patch for ADF Mobile 11.1.2.4 which also addresses the issue of XCODE. Beside that, Timo is correct that the RTO does not help fixing bugs because it is only a forum for communication and assistance

  Frank

• What area should I allow downstairs when you configure the iphone model 6 DPS

  I'm trying to implement a DPS model for iPhone 6, I know that I need 6px alloow on the right of the scroll bar, but am unsure of the bottom margin area

  Thank you

  Hello

  IS the same in the iPad

  Top - 64 px

  Bottom - 44 px

  Concerning

• A split screen device would hold the part of the static web page and allow you to scroll through the rest, it is possible?

  I would like to be able to hold part of a static web page while scrolling down, more often if you follow a tutorial on the screen for setting something with 8.1, (unusual).
  This feature would be similar to what office programs such as excel.
  Is it feasible, or if I should open the same web page in several windows?

  See if it still works.
  https://addons.Mozilla.org/en-us/Firefox/addon/split-pannel/

• Allowing L2TP to pass through PIX Firewall

  Hi all

  Can someone help me on how to allow inbound l2tp connection on a pix? Behind the pix firewall, there is an ISA server as a vpn l2tp server. I can't allow l2tp on the pix.

  Thank you very much!

  Please use this doc as a guide-

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080094a5a.shtml

  Jon

• Yosemite does not allow incoming connections, even if the firewall is disabled

  OS: Macbook Air OS X Yosemite10.10.5.

  The application of "Security & Privacy" firewall is disabled.

  I am able to ping other machines on the same subnet of the Mac, but I cannot ping the Mac from other machines. Using Wireshark to capture packets that I found the Mac has received other machines ICMP packets, but it did not.

  I tried to enable "System Preferences '->' sharing '->' remote access connection", but it does not work if I remote connection to other machines.

  I have a sneaking suspicion that it worked fine until I upgraded to Yosemite.

  Help, please. Thanks in advance.

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• How to add applications to be allowed in the firewall

  I would like to add a few apps allowed through the firewall. How can I do

  In fact, in Vista go to start / Control Panel / Security Center / Windows Firewall / allow a program through Windows Firewall.  Under the tab control Exceptions to see if the program you want to distribute already - if so, just check the box and the program is allowed.  If not in the list, click Add a program and click on the program, if it is in the list, or click Browse to find the program and add it.  Then too will be admitted.  Remember that whenever you make an exception that you open a hole in your firewall, so try to keep it to a minimum and also to remove all exceptions you don't need (that you do not use).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Convenient to blackBerry Smartphones, based on recommended experience device (f/w? /) s/w version (s) for all PC activities oriented the TELUS Mobility BB Tour 9630

  Hey all the... I wonder if I can pick the brains of the people and get good advice re: practice based experience recommended device (f/w? /) s/w version (s) for all PC activities oriented the TELUS Mobility BB Tour 9630, including PC-resident s/w (pkgs) & USB / USB Serial drivers (on XP Pro SP3).

  I will probably be wanting to improve various (f/w? /) components s/w after a hiatus of three years on the BB before... However, based on my own experience of technology, newer / more recent (f/w?) / s/w (pkgs) is (are) not always the best for the end user and, same can be limiting in some identifiable ways... I'm speaking in general terms here... so... it might be the last BB s/w is the absolute best way to go for my PC o/s and turn device platform... I'm just out there throwing this idea to make a educated to determine what updates to install and what level of version, in the case where the generalized suspicion that I have described above have no worth.

  I don't have (or want) data enabled on the 9630, then, have screen capture or copied the text that he (like all the information in the Options > topic: "BlackBerry (R) 9630, smartphone (3G, CDMA), v5.0.0.419 (Platform 4.2.0.179)", 3G bands 1... "") ([and, or course, there is much more information on this screen...]) me (any suggestion or help on this front would be greatly appreciated) have so far escaped... perhaps the most relevant appliance version information required by the members of the forum to help me to decide this question also appear in my PC screenshots below.

  Here's what I left over on my PC from my relationships with my BB Storm 9530 3 years ago:

  

  

  

  Thank you, FFF

  Hello! Thanks for the clarification... they help greatly to understand your request. Here is my opinion:

  Frankenstien wrote:

  In simpler terms... should I upgrade my TELUS Tour 9630 software (currently at: v5.0.0.419 [Platform 4.2.0.179] of the most currently available software, regardless of the version # / platform # which may be?)

  Or, is it an advantage in the upgrade only to a certain level of version of BlackBerry OS on this particular device?

  For your 9630, you're already on the last level of operating system that fate/Telus media. I don't know if other carriers have published anything more advanced, but you can read a very good discussion here:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-tour/Verizon-tour-users-revert-to-old-OS-here/TD-p...

  Of after what I saw, I would assume that there is nothing 'new' than you... at least not officially... but you can dig through the portal to download official to validate the fact that:

  • http://us.BlackBerry.com/support/apps-and-software/desktop-and-device-download-sites.html

  Given that it's carriers who hold responsibility for the release of BB OS packages to their clients, this portal is indeed sorted first by carrier... so you must first dig to find out which carriers support your 9630 and then compare packages of OS coming to present each company support. Unfortunately, it is also the responsibility of carriers to release change log information, but too much of them is rather lax on this point. But this thread I linked to above has I think some very good information that could help you in your quest. You should also look for other threads here (and elsewhere) on similar topics.

  Frankenstien wrote:

  And, I had to upgrade the driver USB BlackBerry / USB Serial Driver / Device Manager / Desktop Manager software on my XP Pro SP 3 PC to newer versions? (1st post screenshots all present the current version # s... this software was installed all around mid-2009)

  Or, is there an advantage in upgrading only at certain levels of version of the BlackBerry software for each of the above elements... in the case of this particular device?

  Desktop software does not care the specific device. On the contrary, it gives some capabilities that you choose. For example, if you need the ability to export your BB to CSV/ASCII, then you need to stay in the range of version 6 because this feature has been removed from version 7. Similarly, if you intend to synchronize your BB with a computer (-) office or PIM, you must make sure that you run a Desktop software version that is compatible with your PIM:

  • KB12268 Support for synchronization for BlackBerry Desktop Software for Windows

  If none of those that are important and/or compatibility is fine with the latest version, it is often wiser to stick to the latest bug fixes, feature enhancements, etc. Is doesn't want to is not to say that people have no problems with the latest version through the Desktop board software on this site is confirm that pretty quickly! But, in general, there should be no harm/no foul to the use of the latest version of the with your BB desktop software.

  In addition, it is always a good idea to also download and install on your PC the BB OS package that is actually running on your BB. This is a little personalized Desktop software so that it can better work with your specific environment of BB. You cannot choose which components within the desktop software you want to update (mentioning "point line" you did)... instead, you install the whole package, and it contains within everything there as 'in progress' based on the global version of the Desktop software package.

  Hope that helps! Good luck!

• Speedepro says I have 536 problems. Should I allow to repair?

  I was told that a line on tune up can cause problems. Should I allow in

  or I can fix it myself. I have no problem operating I can say.

  Hello

  Absolutely not. Too much hype of the system optimizers and registry cleaners will cause problems while setting
  little or nothing. Considered to be snake oil. Uninstall it and be happy, that he went. These 536 questions
  probably not really exist.

  If you have problems, real problems, ask in the Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  One day computers will be self-healing however we are far from this time.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">