Cloning problem

Similar Questions

• Cloning - problems point source

  I have problems with cloning with respect to the selection of a point source. I option-click on the area that I want to clone but when I use the brush to clone it works for part of the part of beginning of the brush but clone pixels, I did not choose. For example, I'm eliminating the reflections of a flat screen TV. I'll clone of the darkest section with no reflection but shortly after I brush the brush in the clone on the reflective parts of television will start painting in something the Tablet near the center of entertainment. If instead of brushing in what I would clone I am rather the equivalent of a mouse click, it works better, but is not as smooth and I find myself with obvious circles of the brush. I know that I can adjust the opacity, but I really want to know why I'm having this problem.

  I expanded and reduced the size of the brush, when selecting the source point - always make sure that the source point includes only the area I want to clone. In my example above, I notice that if the distance between the black pixels of the screen and pixels colored tablet is 1 ", then the brush stroke when I clone the pixels used after on this same distance - about changes, give or take.

  Does this mean that it is the only way that the brushes are working and that instead of being able to make a longer stroke I need to use several shorter strokes?

  I'll clone of the darkest section with no reflection, but shortly after that I brush in the clone on the reflective parts of television the brush will begin painting in something the Tablet near the entertainment center

  That's how it is supposed to work. You choose a point source to clone of brush and then, from a different point. The brush will cover a surface brushed with some form, and this area will be filled by a zone of the same shape, cloned from the neighborhood of the point source.

  Then draw your strokes so short, that they will remain in the dark area. Clone several times, so you can use the short brush strokes, if the brush strokes are too pronounced, increase the flexibility of the clone tool.

• RMAN cloning problem

  Hi gurus,
  
  I'm trying to clone the database on the same server in oracle 11 g 2 on oel 5.5.
  When I ran
  RMAN > duplicate target database to 'clone ';
  
  It runs, but after that the execution cursor blinks like that alone. the script does not end.
  
  This is the alert log database clone.
  
  Commissioning:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With the options of partitioning, OLAP, Data Mining and Real Application Testing.
  Using parameters in Server pfile /u01/app/oracle/product/11.2.0/db_1/dbs/initclone.ora-side
  Parameters of the system with default values:
  process = 150
  memory_target = 256 M
  control_files = "/ u01/app/oracle/clone/control01.ctl".
  control_files = "/ u01/app/oracle/flash_recovery_area/clone/control02.ctl".
  db_file_name_convert = ' / u01/app/oracle/orcl.
  db_file_name_convert = ' / u01/app/oracle/clone.
  log_file_name_convert = ' / u01/app/oracle/orcl.
  log_file_name_convert = ' / u01/app/oracle/clone.
  DB_BLOCK_SIZE = 8192
  compatible = "11.2.0.0.0."
  log_archive_format = '% t_%s_%r.dbf '.
  db_recovery_file_dest = ' / u01/app/oracle/flash_recovery_area.
  db_recovery_file_dest_size = 3852M
  undo_tablespace = 'UNDOTBS1.
  Remote_login_passwordfile = "EXCLUSIVE."
  db_domain = «»
  dispatchers = "(PROTOCOL=TCP) (SERVICE = cloneXDB)" "
  audit_file_dest = ' / u01/app/oracle/admin/clone/adump.
  AUDIT_TRAIL = 'DB '.
  db_name = 'clone '.
  open_cursors = 300
  diagnostic_dest = ' / u01/app/oracle '.
  Wed Dec 07 04:21:43 2011
  PMON started with pid = 2, OS id = 6533
  Wed Dec 07 04:21:43 2011
  VKTM started with pid = 3, OS id = 6535 high priority
  VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms
  Wed Dec 07 04:21:43 2011
  GEN0 started with pid = 4, OS id = 6539
  Wed Dec 07 04:21:43 2011
  DIAG started with pid = 5, OS id = 6541
  Wed Dec 07 04:21:43 2011
  DBRM started with pid = 6, OS id = 6543
  Wed Dec 07 04:21:43 2011
  PSP0 started with pid = 7, OS id = 6545
  Wed Dec 07 04:21:43 2011
  DIA0 started with pid = 8, OS id = 6547
  Wed Dec 07 04:21:43 2011
  MA started with pid = 9, OS id = 6549
  Wed Dec 07 04:21:43 2011
  DBW0 started with pid = 10, OS id = 6551
  Wed Dec 07 04:21:44 2011
  LGWR started with pid = 11, OS id = 6553
  Wed Dec 07 04:21:44 2011
  CKPT started with pid = 12, OS id = 6555
  Wed Dec 07 04:21:44 2011
  SMON started with pid = 13, OS id = 6557
  Wed Dec 07 04:21:44 2011
  RECCE has started with pid = 14, OS id = 6559
  Wed Dec 07 04:21:44 2011
  MMON started with pid = 15, OS id = 6561
  Wed Dec 07 04:21:44 2011
  MMNL started with pid = 16, OS id = 6563
  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
  commissioning or shared server 1...
  Environment ORACLE_BASE = / u01/app/oracle
  Wed Dec 07 04:23:50 2011
  Closure of proceedings (immediate)
  Closure of proceedings: in addition to logons disabled
  Stop background MMNL process
  MMON background process stop
  The high waters = 4 license
  All dispatchers/dispatchers and shared servers stop
  Wed Dec 07 04:28:54 2011
  STOP: Active processes prevent the functioning of the stop
  
  
  
  Can you please help me solve this problem...
  
  Thank you very much...!

  899329 wrote:
  Thank you gurus, when I increased the large pool, she did it.

  Thank you very much

  Cool!!! Please close the thread as answered. :)

• How to solve the problem of Collision of Signature of disk in Windows 7?

  Original title: hard drive WD, cloning problem

  I was my hard drive on my external hard drive cloning. After about 50 GB of cloning, there is a power failure. Now, windows is now my drive hard wd offline saying there's a collision of signature with a disk that is online. Can I use the disc on another computer and format? This will solve my problem please help

  Hi Dominique,.

  Thanks for posting your query in Microsoft Community. I will help you solve the problem.

  I suggest you try the steps suggested by defended on April 23, 2010 and check the issue.

  After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Note: This task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  I hope this helps. Please get back to us if you need further assistance.

• Qosmio G30 (PQG31) - problem with cloned hard drives

  Hi all!

  * Qosmio G30-154 * (* PQG31 *).

  Demo of the Qosmio has 2 hard drives with XP MCE (32 bit) installed on the primary.
  The RAID parameters are JBOD.
  BIOS is "newer" 3.90

  I would try to upgrade the drives (without installing any OS) and... have a problem!
  BSOD "Stop 0x0000007B" after 'clone with resizing' for the main HARD disk.

  I read on [drivers Toshiba RAID | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48489] also [how to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm] and (or)
  [SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations | http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm], but I don't want to install OS, I want to keep intact my OS work.
  F6 (for all usb drivers) is not available to boot OS, sorry.

  "cloned" drive is in line with the correct name of made in the BIOS. "Cloned" secondary drive works (with old primary school). How to get access to the new primary OS and loading cloned? Please, any ideas?

  Thank you.

  Hello

  I think that the system cannot boot to the new HARD disk as the partition where the system is installed, was not marked as bootable system partition.

  I recommend to insert the previous HARD drive and to start the laptop.
  HARD drive new, cloned could be connected as an external HARD drive to a USB port.

  Then you should go to disk management (right click my computer - manage-> management-> disk management computer)
  Here you can see the HARD internal disk and the 2nd HARD drive connected to the USB port
  Right-click on the partition (2nd HARD drive) where the Win XP has been installed and choose the partition as the system partition and mark it as active.

  Then you could change the HARD drive again and could power the device in place. Usually, the system should boot to the top of the new marked system partition.

• Some problems with cloning Tecra M10

  Hello

  I created an Image of the Tecra M10 and cloned it with Ghost8.2.

  Then I tried to clone it to other M10 who has worked the most but mashine 2 or 3, I get an error "unable to read from the HARD drive please restart."
  Does anyone have an idea what?

  Greetz

  Hello

  I think the problem is the HARD drive where the image is stored because the GET error Impossible to * reading * from the HARD drive please restart.
  Then you should check the HARD disk where is the image is stored. I looked, and a good program for it's Drive Fitness Test.

  Good luck and post your result.

  Welcome them

• What are compatibility problems in cloning a hard drive with 32 MB cache to a cache of 16 MB or vice versa?

  Are there compatibility issues during the cloning of a HD with 32 MB Max for a max of 16 MB, or vice versa, HD the two 500 GB drives.

  Thank you in anticipation.

  Original title: cloning of hard drives with Max different buffers

  Hi blacksmith60,

  No, there is no problem with compatibility. But, you may notice a slight change in speed and performance.

• Services Windows problems after cloning a HARD drive

  Hello

  I recently cloned my HARD for one SSD drive, using the SSD as my boot device. Since then, I was able to successfully access Windows services.

  For example, I've tried to expand a partition on my SSD and went to computer management. I got a message saying that it

  "cannot open log events on the computer service.

  I click OK and the computer management opens.

  Clicking on device management, I get a long enough message that appears that says

  'Disk management could not open Virtual Disk Service (VDS) [name of the hard drive]. This can occur if the remote computer does not support VDS, or if a connection cannot be established because it has been blocked by a firewall of Windows. For more information see on diagnose and correct this problem, see Troubleshooting Disk Management by using disk management. »

  I click OK and the message disappears.

  If I click on Services and Applications in the left pane I get WMI control and Services in the central pane.

  I double-click on Services, scroll down to virtual disk, double-click anywhere on the line, I get

  "Windows could not open the service of virtual disk for playback on the local computer. Error 1726 the remote procedure call failed. »

  Is someone can you please tell me what is happening? What have I done? Why am I not able to access disk management?

  I tried sfc/scannow and I get the message

  "Protection of resources Windows could not start repair service".

  EEK! What have I done?

  Thanks for the help, but I thought about it.

  I had turned off by mistake in my BIOS PATA, and causing the problem.

  Thank you for taking the time to respond, however. It's very appreciated.

• Problem using Vista Home Premium disk cloning

  My laptop hard drive Asus F3F is almost full, even after compression, I bought a 500 GB WD Advanced format drive and a drive enclosure that will house him while I try to clone the drive in it. I loaded EasUs Todo backup (free) to help with cloning. When you connect the new drive appears in Device Manager under disk drives and computer under storage management, but it does NOT appear in my computer as a disk in the backup software so I am unable to make the clone. Can anyone help? (The reason for his approach is because that software op is the one that came with the laptop)

  Hello

  Thanks for posting the request in the Microsoft community forums!
  I understand that you are facing the issue with disk cloning. We'll try to get this fixed number.

  You can try the suggestions in the link and check if it helps:
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140

  If the problem persists while you can display the query in the TechNet forum.
  TechNet Forums - http://social.technet.microsoft.com/Forums/en/categories/

  If you need further assistance, please answer and we will be happy to help you.

• WRT 120n problems of mac address cloning

  Hello everyone .

  After that I bought my linksys wrt 120n some time ago, I had problems with my pc mac address cloning. I wasn't able to do. The cloning option tab become gray and could not be selected. Prior to that, everything worked fine for a month or two. I wouldn't change anything.

  Reset for 5 seconds does not solve the problem, unplug and plug back or bring back the default values does not work either.

  I'm updating to the latest firmware due to other problems of people with 1.0.0.4 version (mine is default 1.0.01) and power Cycle has not helped.

  I decided to contact linksys chat based help and I got solutiion of the consultant that solved the problem. I thought that I put it here in case someone else got the same problems...

  Solution below in the next post.

  Solution:

  1 make sure that the computer is connected to the router with cable (cable connectivity.---> cable modem RJ45---> > port the router Internet---> > port Ethernet 1 of the router to the computer; the connection will be the same only);

  2. power should be on;

  3 reset the unit: -.
  -Press and hold the button of reset for 50 seconds.

  - Then disconnect the Dungeon can now hold the reset for 30 seconds.

  -Plug back in the power and keep the button of reset for 30 seconds.

  -Release the reset button. ;

  I'll just add that I used only the wired connections don't wan, on windows xp. I also noticed that the base of the router configuration browser has problems sometimes under some browsers other than IE...

  Hope I helped someone. See you soon.

• Problems with MAC WET11 cloning features

  Hello

  I'm having a devil of a time to set up my v2 WET11 to allow my XBOX be fully connected. I can configure and connect the bridge, ping, ftp files to XBOX etc. Only problem is when I try to play bound. I can see the game in progress on the second XBOX but cannot participate. Related game works perfectly when Xbox is wired to the router.  I know that play bound depends on each game console broadcasting their MAC, so I need to clone the MAC address of the XBOX to use the bridge.

  Unfortunately the WET11 web configuration interface I cannot do. Under Settings/Advanced cloning Mode, all controls are disabled - greyed. This includes the control that allows you to turn on cloning.  I took a shot the script behind the page and it seems that it checks to see if 'disable cloning' is selected and if so, disables all controls of cloning, including one that would allow me to get back on. Since the default value is disabled, it is the programmatic equivalent to lock the keys in the car. You can take a look at here emulated interface:

  http://UI.Linksys.com/files/WET11/v2/advanced.html

  Of course, the demo is fully functional and do not exhibit the problem...

  Many people have described solve their XBOX related play questions by cloning the MAC address of the XBOX and see change settings using the web interface.

  I tried different versions of the firmware 2.06 and 2.07, 2.08 USA 2.08 EU. Same results. Tried the Installer Wizard 1.06 worm, but he does not even include the MAC settings.

  Had two cats different with online support agents and the two seem as puzzled as I am.

  Am I missing something obvious? Depends on the availability of cloning parameters options elsewhere in the config utility?  Is the interface designed for cloning taking place without intervention of the user on the v2 and v1? (doubt)

  Has anyone else seen elsewhere?

  I know that people have written code to pull the strings of parameters off the unit then maybe the reverse is true and I can write the script to directly change the settings.

  Any suggestion would be appreciated.

  Rick

  Well well well - apparently the firmware is not totally compatible with IE7. Downloaded Firefox and the interface works as advertised.

  Rick

• I have a problem with the cloning tool, when I retusch to digital photos. When I hover over the image with the cloning tool it slightly changes the picture and ruin. -What someone knows how to configure the tool so it doesn't ruin the image when moving be

  Hi there I do retusch on digitized images and when I move the tool between the dust spots cloning it changes the image slightly. Just noticed and got a wedge after working for several days.

  -Does anyone know how to put the cloning tool to avoid this chang during the movement of the tool on the image?

  Very grateful for an answer

  Anders

  It is possible that your Source region is quite different from the target area that the Clone tool is not the most effective use.

  Another reason is that you have put a sample of Clone of hard edge.

  I suggest you use the Spot Healing Brush tool to remove dust spots and see if that solves the problem.

• Cloning of the hosts nested ESXi 5.5 in my computer 10 - address IP problem

  Hi all

  Is it possible to clone VMs host ESXi in workstation without any problem?

  If so, then when I tried to do, the cloned virtual machine always gets the same IP address as the parent VM.

  > > I tried with Bridged networking networking and host-only.

  > > Makes sure that the MAC addresses of the two virtual machines were different (unique generated)...

  Can someone help me with this please?

  Have you tried this: copy ESXi VMs - addresses management unique MAC interface?

• How can I solve the RDP and SQL problems after cloning of a paralytic?

  I got a job Server 2008 R2 system running SQL Server Enterprise 2012 all on an 8 G/4CPU VM and did a ' copy to ' VAPP Cloner.

  The new VAPP has been on one VLAN separated. During the copy process, customizing of comments was shortlisted, and I gave the new virtual machine, a new name for the machine. I can access both VLAN via my WIndows 7 x 64 desktop client OpenVPN.

  So far so good, I could use the vDC to log on the new machine of vApp using my previous administrator credentials.

  I found myself with two problems though...

  (1) none of my previous connections will work with SQL Server, when I try to launch SQL Server Management Studio. I get a message saying "Connection failed for user 'newmachine\user'" so maybe the MSN usr for duplicate users are not the same as the original sid user? I think that he could not tell the difference, if everything has been cloned and the machine name has changed.

  (2) my RDP 7 Windows client does not connect unless I have configure the new server to allow "a MOP" instead of just "Network Level Authentication" that has been configured on the original server that I cloned from. When I activate "all RDP" I can RDP into the cloned fine system.

  The cloned machine had the new name of the machine and a new SID assigned by the cloning process. The original and clone are on VLAN isolated and cannot see. Both not use areas and working groups.

  If I leave the cloned server THAT RDP "NLA" value only as the original server, my Windows 7 client gets a message complaining that RDP does not support the NLA for the cloned machine. RDP works fine connecting to the original server that still has not specified NLA. The RDP instance that says I need enabled NLA, watch NLA is activated in the about box.

  Someone at - he saw either of these issues? Any suggestions?

  Thanks, Dave

  Hi, my understanding is that sysprep does much more than simply by changing the SID of the box, it will also use the SID to regenerate the local MSN accounts system which is problably the origin of the problem, you're experiency. This is done for the security reasosns avoid guests who have accounts with the same sid on different machines. There is a tool called newsid that changes the SID of the server and let the system SID accounts because they were, but it has been known to have other issues but allow him to achieve what you want? I thiknk MS have retired it now, but you can always download on the net.

  If you need get SQL running sysprep and want to automate the process to set up your DB and users following post useful:

  http://msdn.Microsoft.com/en-us/library/ee210754.aspx

• Problem with stamp cloning tool in CS5?

  Hello

  I'm having the darndest problem I have never met before. I use the cloning tool in CS5 and I'm trying to clone stamp a portion of the photo and clone in another part of the picture. The problem is that after I option click on and then drag it to the part I need, dark spots appear in the place? What's not here? Here is an example. Thank you.

  I am under Photoshop CS5 for Mac with the latest updates.

  

  We can't quite see in your image, but you have the blending mode for the tool clone set to difference maybe?  Otherwise go to leave the top drop-down list in the Options bar and see if you have presets for this tool and reset.  If none of this helps, the time to reset the preferences file (Shift Cmd opt as you open Photoshop)