Close all files at once?

Similar Questions

• Close all files in sequence

  I need a sequence to close all files in sequence. I was hoping to find a method of engine as "CloseAllSequenceFiles". Unfortunately, this method does not exist. Any ideas on how I can accomplish this?

  Thank you

  Steve

  If you write your own UI using the teststand user interface controls you can apply or modify the implementation of ApplicationMgr.QueryCloseSequenceFile () event handler. There is no way to change the behavior of the sequence editor to do what you ask, I know.

  Hope this helps,

  -Doug

• close all files

  I have been informed before launching "detect and repair disk errors, I have to close all the files. How I have this and I turn off the wireless network connection as well?

  If you are talking about this article (or something similar):

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_disk_logical.mspx?mfr=true

  If you decide to perform an operation that can only be carried out or completed when all files are closed, XP invites you to schedule the operation at the next startup of XP.

  If you answer Yes, XP will run the operation during the next restart before things like your desktop or other applications load upward.

  If that's what you're going to do, when the drive to check the operation is complete, you may be curious to know the results.

  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do it yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Description:

  Checking file system on C:

  The type of the file system is NTFS.
  A disk check has been programmed.
  Windows will now check the disk.
  39070048 KB total disk space.
  25151976 KB in 78653 files.
  48256 KB in 10264 index.
  0 KB in bad sectors.
  237080 KB in use by the system.
  65536 KB occupied by the log file.
  13632736 KB available on disk.
  Windows has finished checking your disk.

  If you see errors - same errors that are corrected, re-run the operation (such as chkdsk/r) until you see no error.  You should have no errors.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Extract all function extract all files at once - Win 8

  Recently, we bought a new laptop. She has Windows 8. Extract all functions does to extract all files found in the selected location. Only to choose the first or the last selected file. I have a crazy number of files to extract, and I can not just extract one by one. This feature allows to absolutely beautiful work in my old laptop... also on windows. Can someone pls help? I'm going nuts!

  I downloaded 7 - zip and it works (so far!  :)) Thanks!

• Convert all files at once

  I'm new to the creative cloud, but not of Adobe Indesign.  Normally when I would update to a software suite, all files associated with a particular program would be automatically associated with the newly loaded software version.  I noticed that all of my "Indesign" files always have the CS4 icon, when I open a file and print, I wonder if I want to save it in a file IDCC.  Then, he makes me choose where to place the file and asks me if I want to get rid of the old file and keep both versions.  I understand that I could store files on my drive hard or in my account of cloud.

  My question is, is there a way to automatically convert all Indesign CS4 files on IDCC files so I don't have to go through the manual process of putting the file newly converted in the right folder each and every time I open a file (for the first time in IDCC)?  I want to keep all my files on my local network for now and feel like I'm missing something simple thank you.

  Steve

  You would be actually well advised NOT to replace or remove older versions. It is not uncommon for the converted files (especially when the originals are many versions older than the current) to suddenly encounter a fatal error. Backup storage is very cheap compared to the cost of the reconstruction of a long document or complex from scratch.

• I want to close all tabs at once

  He always says he is advising me when I close the 2 tabs at the same time, but gives me no option to close one that is always what I want.

  You can middle - click on a tab on the tab bar.

  Don't you see a close button on tabs if more than one tab is open?

  • https://support.Mozilla.com/kb/tabbed+browsing
  • http://www.Mozilla.com/Firefox/features.html

• FM crashing when it formats import / closes several files in a book

  FM hangs EVERY time it closes several files. I first noticed this problem when I tried to import the formats through all the files in a book. It would work for less than 10 seconds, and then it will disappear. My theory is that the accident occurred at each closing several files FMis and it makes sense (to me) because it seems that FM opens and closes each document in a book when the formats are imported in all of the files in a book.

  I first noticed this crash once I had changed several settings in an existing address to change the way the pages are numbered in all of the work (management wanted to change to a 'constant' numbering system from the first to the last page of the book to a relative numbering system where numbering begins with each chapter). I do not remember the specific changes I made when I got this crash, but this accident has been constant since this point.

  It is played like this...

  1. I select all the files in a book and select file/import/Formats.

  2. I click on apply, then I can get a few 'cannot Ωtre annulΘe' alerts regarding the undo history.

  3. then the accident occurred and I get the following alert from Windows...

  

  4. my solution was to open all the files in the book and then import formats. This does not create an accident; HOWEVER, the same accident will happen if I try to close all open at the same time by selecting files, right-click and choosing Close.

  5. it's really impact my workflow because the only other workaround to avoid a crash is to close each file separately, and it's extremely frustrating, especially when I'm dealing with a book that contains 60 files.

  I am a relatively new user, and I'm certainly not the more technical user in this forum. I use Windows 7 and FM 11.01.382. I searched on the internet several times and I have not found this topic, and I'm sorry if this is covered elsewhere.

  Thanks for any help!

  Instead of selecting all the files in the book, have you used them open all the files, options, save all files and close all files at the level of the book? In the book file, just hold down the SHIFT key before clicking on the option of the file menu and you should see the options "All".

• A method to stop all applications at once

  Quit all open applications.

  I came across a thread where someone wanted to know whether all applications should be closed before that the mac is stopped.

  During the debate, someone else asked why it is not possible to close all applications at once.

  I remembered reading that can be a solution for this with Automator easily.

  This is how a very simple tool to stop applications open with Automator (in the Applications folder).

  Here's how:

  -Open the Automator application,

  

  -Choose Create a new "application."

  

  -in the search box type 'Quit', then drag the "Exit all Applications" option on the right side.

  

  -You can set applications to ask save changes or not

  

  -Save the workflow as an application and name it for example "quit all."

  

  -I put in Applications, but it will run everywhere,

  

  It works as a standalone application and it is very fast.

  You can change the icon of the application according to the standard method:

  -Select quit all, and then select an icon that you want to quit, all for the two "get Info."

  -Select the icon, copy in the menu.

  -then click on the new "app" icon and paste it in the menu.

  

  -See it translate.

  

  (Note: I found this quit all icon somewhere in the internet).

  Lexiepex wrote:

  Quit all open applications.

  I came across a thread where someone wanted to know whether all applications should be closed before that the mac is stopped.

  My experience is that it is not always necessary - is is counterproductive. "Compression of memory" the new OS X manages memory and apps very effectively.

  'Compression of memory's a triple play... It is a performance gain; Compress and decompress data in RAM is much faster than reading and writing on the disc, even an SSD. It is a victory of energy; less time spent to transfer data between RAM and disk, more time that the system can pass in its idle state. And finally, it is a victory of capacity; ... can handle loads of work much more demanding than previous versions of Mac OS X.

  By closing the Mac, it's much faster if you leave the operating system take care of closing down all applications and reopen all the apps on reboot.

  

  In this way, you can pick up where you left off in record time.

  MacBook Pro (15-inch mid-2012), OS X El Capitan (10.11.5), i7 480 GB SSD 16 GB RAM iPhone5 iOS9.3.2, Parallels10.0.2, HP OfficeJet Pro 8620

• Update all files in the new version of Framemaker book

  I inherited a Frame 8 book with many files, is it possible to update all the files in frame 11 in just a few steps? Could this be in ExtendScript?

  1 open the book file.

  2. button Shift and then select file > open all files in book

  3. treat warnings/errors that come up to the top (you can turn off reminders on the opening of an older version)

  4. to emphasize in the book file.

  5 switch speeds, and then select file > save all the files in the book (this will save in FM11 format)

  6. move speed, and then select file > close all files in the book.

  7. save the book file (it must be converted for FM11).

  Fact.

• Once done your preliminary tests on all files created with muse this corrupt somehow, or will they be OK?

  Once done your preliminary tests on all files created with muse this corrupt somehow, or will they be OK? My company wants to use a product test to determine whether to buy this product for the future. These files created will be able to function properly on the web once my trial? Or it would require buying keep these files up and working properly?

  Hello

  The files are not affected at the end of the Muse. Site will work very well on the web.

  Kind regards

  Aish

• Close all windows pop up at once?

  Any of you know of a way to close all the windows pop up at once?

  Let me explain:

  I have a lot of bins for this great project, I'm working on that.  When I click on a tray, it pops up a window and then when I click on an other bin it pops up a new window.  And while working on this project, before that I know, I'll have dozens of windows open, stacked one on the other.

  Is it possible to close with one step to go back to square one?

  Thank you!

  As far as I know, there is no way to close multiple floating panels in a single step. But what I can offer is a way to avoid all these popups spawning in the first place. Check out the options in the box of pots on the general page of the Preferences dialog box.

  

• How can I close all the tabs at once without having to restart Firefox

  At a time, how can another closing a tab I close all my tabs without having to restart Firefox

  On a Mac, you can close the window and open a new window to achieve this. Which does not close the Firefox application. You can also a right tab and choose "Close other tabs" from the context menu.

  Set browser.tabs.closeWindowWithLastTab pref false on the topic: page config to prevent closing the last tab to close the browser and display a close button if only one tab is open.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• How to close all the worksheets at once

  Hello

  How to close all the worksheets at the same time (with one click)?

  It of so annoying to close one by one and asked if you want to save the script or not.

  Thank you

  Have you tried right-clicking on the name of the tab and selecting 'Close All '?

• I have re-installed all files that have been deleted over time because IE9 was not working, so I thought I want to reinstall all the files of the past and really screwed things? Help?

  I really missed my Deskbar and the task at the bottom of the screen. All these .dll warnings came after I have connect and would say the name of the .dll to 1st say this isn't needed to power your computer or try and find the file .dll and re install. So I figured out how to remove about 4 dll then I could get the upcoming desktop and taskbar. But all ICONS microsoft on office or the page of the window start on and all microsoft Icons will not open now by Rt or Lt by clicking on file a warning would come and that the file is not saved and you are unable to open. !! So, I have this problem? And I need to be able to click on one of the microsoft Icons if I can do all the things I need to do or use?   And the rest of the desktop icons that I can open them only my Rt clicking on it and then clicking open so I can open chrome, firefox and IE 9 problem 2ed.  And I can't use the click of the RT. on the screen so I can put my screensaver. The background is white, not the dark blue or black back ground...  Firefox and chrome work good but IE 9 is always the same way. Once I click on the Inon to open and use IE9 it goes to my home page then I can't use it to do something on the homepage or go to any other web page, just, it gets stuck and can't do ir even close. I have to use the Task Manager to close IE9. and the once on 4 test IE 9 will work for a while the GET stuck and can use it at all. so have to close and use one of the other my browser to connect.  I ran some of my cleaning utilities and they have got rid of a lot of files, but I still have all these problems. Can someone explain to me step by step way to each of these problem difficulty by?  If I have to I will uninstall IE9, but how it is said to get rid of IE 9 is tapping on the starting window area were he said programs. I can't type something here to use one of the ways microsoft says how get rid you of your IE 9 then reinstall it?  Help me please?  Thank you for your help? !!

  Hello

  "I ran some of my cleaning utilities and they have got rid of a lot of files."

  You should NEVER use Registry cleaners and delete files using them.

  See if that helps you.

  "How to fix and check the integrity of system files of Vista with the System File Checker"

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  "How to extract files from the Vista Installation DVD"

  http://www.Vistax64.com/tutorials/261616-extract-files-Vista-installation-DVD.html

  Alternatively, you can do a repair installation using a DVD of Microsoft Vista upgrade.

  How to perform a repair for Vista Installation»

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Close multiple sheets at once

  I want to have a similar effect in the file selector. It shows a new worksheet for each hierarchy of folder, you select, but when you click on cancel all leaves are closed at the same time.

  I have a workaround where I call a closeSheet() on a sheetBelow property, it works but causes the entire screen turn grey for a short moment. The file picker does not have this, so I thought there may be a better way to do this.

  had another idea:
  the use of the pages with a dismissAction and a back custom with bb_action_file icon button almost gives the look and feel of the file picker.
  and I'll just use navigationPane.navigateTo to close multiple pages at once.