Close command of the groups in the data portal

Similar Questions

• Custom properties are not displayed on the data portal

  In my version of return of DIAdem (2011), there are features to display personalized data portal properties. If selected by right-clicking on the data portal properties would appear under the root, the group or channel where they were stored. So far I have not been able to find this menu in 2014 DIAdem. This feature has been removed?

  Hi DIAdemUser1,

  In fact, this feature has been removed.  R & D wanted caused more confusion than benefit, and I agree.  I'm sorry for you and others who liked the feature that has now disappeared.  When tiara 9.0 released custom in the data portal properties shows their data types, but this feature has been removed in favour of simplicity.  I often miss this feature, but it's for the greater good.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• HOWTO copy effectively chart the data portal

  I have a table in memory VBS and would like to create a channel in this data set-based data portal, I currently use this construction of code to copy the data:

  ' intChannelCount is the number of samples

  ' MaxHold is the array of data to be copied

  ' oFFTMaxHold is the string of data that is the target of the data

  counter = 1 to intChannelCount
  oFFTMaxHold.Values (counter) = MaxHold (counter)
  next

  It's rather slow (and if data preview is open in the data portal) still a lot slower.

  Is there a method to copy the entire table in one operation on a string?

  Tone

  Hi tone,

  If you have DIAdem 10.2 or later, you can use the following command to do this with a command - by the way the table of values as one of the parameters - order this is a common situation when you query records of a base you want to load into the data as data channels portal.

  ChanRefsArray = ArrayToChannels (ValuesArray, ChanNamesArray)

  In the case of your example, it would be:

  Call ArrayToChannels (MaxHold, Array (oFFTMaxHold.Name))

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Importing several files .csv in the data portal

  I'm looking to import data that contains multiple .csv files in the data portal. I have a code to succeed, which can erase all data from the data portal, open a dialoge box to find new data and open new data using a .csv use. I want to improve this script to be able to have the ability to load multiple datasets in the data at a time portal, but I have a limited knowledge of the VBS coding structure. Can someone advise measures to reach this solution with VBS minimal coding experience? Thank you all in advance for your help.

  Hi dc13.

  The tiara FileDlgShow command has the ability to load several files at the same time. Please take a look by using tiara for more details and an example.

  Greetings

  Walter

• Tiara taking much time to load the TDMS 700 MB to the data portal

  I'm trying to load a file of 700 MB TDMS in DIAdem, sampling frequency of 4 channels 10 Hz for 4 days. When I drag the file in the data portal, tiara freezes, its on a 2GB machine, a file that is located on the desktop, not running other programs and it is went 50 minutes without being able to load before I did leave. seems to work fine, although on smaller files. I was wondering if this sounds normal and if anyone knows a way around him.

  Yin

  Hi Yin,

  You can defragment the TDMS file loading in DIAdem programtically:

  TDMSFileName Sun: TDMSFileName = "C:\Dokumente und Einstellungen\GrRomaiS\Eigene Dateien\LabVIEW Data\ttt.tdms.
  Call DataFileLoad ("" & TDMSFileName & "","TDMS","" ")

  Please note that in this case, you will need to replace at least"<" and="" "&"="" in="" your="" filename="" (not="" contained="" in="" example="" code="">

  In addition, we have incorporated a fix in DIAdem 2010 SP1 that will speed up loading files TDMS (for example containing explicit time strings). We hope to see DIAdem SP1 this year...

• Getting file names of different groups in a data portal

  Hello

  I find it difficult to recover the file names of different groups in the data portal. For example, say that I loaded two different files of the same .tdms ext data portal that automatically assigns as two distinct groups. My goal is to get two groups using VBS in diadem 11.1 the name of the file.

  Can someone help me in this regard.

  Kind regards

  X. Ignatius

  Thank you Andreas.

  I have a plugin that loads multiple files of lvm with their name sourcefile. Earlier it would be like Labview, Labview data1, data2 Labview data... When multiple files are loaded. Now, with this plugin attached in the startup script, all files are loaded with their original file names.

  Attached plugins, set the LVM Custom load event. Vbs in the script, another starter accessory is the title of the main script function.

  Kind regards

  X. Ignatius

• Is he closer to display the data in graphic format in the OPS?

  Hello Experts,

  I'm working on a feasibility OFA study and I have a question: is there in the OPS, any approach to represent data in graphic format, such as the schema of the Terminal?

  As far as I know, ADF supports this kind of representation and it can be incorporated into the OAF page as region. But it seems to separate server for the ADF, which is not supported in my project (assuming we have only EBS server). And the situation is similar for embedded Analytics OBIEE approach.

  Would like to share your experience or the reference of this kind of solution? Appreciate your help in advance!

  Thank you and best regards,

  Clark

  You can use graphics in the OPS.

  Visit this link: Java Based Technology Blog Sushant: 14. Graphic design in the OPS

  Sushant-

• Question of divergence of the data portals

  I weekly schedules for my work of discovery, inventory and download job.  My last successful upload was this past weekend.  The last successful upload was March 27.  The downloaded data from March 27 were correct and the portal showed all expected data (approximately 22 aircraft).  This past weekend, the download has the portals data showing only 1 device.  I checked the collector and I see work of discovery of these two weekends.  I checked on the collector-managed devices and the list shows all the correct data.

  Thoughts as to why the download job would have given for a single device?

  SSH on the manifold and run the command "sudo epsc service restart. Based on the first screenshot, it does not resemble the programming works correctly.

  Once the service ended the reboot, manually start the inventory, wait until it ends and then run the download manually.

• Cannot filter data through the data portal

  When I bring in a large data file to the portal, clear this check box, then load another data file, the channel filter function doesn't work anymore.  Any ideas what's happening?

  Somehow, all channels pinned, and I does not recognize the PIN icon.  My mistake, thanks for reading.

• Cannot reset the dates of the digitized photos

  Can anyone help?

  After I search for old photos in the Organizer in Photoshop Elements 6, I have always change the date of the photo to the effective date or year where she was taken. (Edit/set Time/Set Date and time)

  Incredibly frustrating, is that for each photo, if I type in the year (1955), the screen set the Date and time always record like a year earlier (1954). (I have type the correct data, and then close the form.) If I return to the screen, I discover he's changed incorrect data.) The same incorrect year appears in the EXIF metadata saved with the photo.

  If I type in the year and month (for example, December 1965), the Set Date display always will record it as a month early (November). Yet once, the incorrect month appears in the EXIF data.

  If I type in the year, month and day (November 16, 1983), it will be saved as a day earlier (15 Nov).

  ONLY if I specify the TIME the photo was taken (in addition to the day, month and year) it will record correctly. But of course with most of the old photos, the time (and even the day and month) are often not known.

  Does anyone have an idea what is happening here? It drives me crazy.

  Thank you very much.

  Don

  PS: Is it possible to gang - write Notes to photos. I often put something in the section Notes under properties a photo in the Organizer, but I see no way of putting the same note with several photos: I end up having laboriously copy the same note in each photo, one at a time.

  Sorry, I didn't explain that very clearly, I'll try again.

  The bug to set the Date and time is not prevent you enter the date you want is saved in the catalog.

  Whenever you call Edit > set the Date and time and together a date and time, even if you set some unknown fields, he correctly recorded in the catalog fields date and time, you see in the command window.  If you call adjust the Date and time on a photo that has already been defined to have so many unknown areas, then a bug causes the date fields in the command window to be incorrectly pre-filled.  However, if you then change these fields to the correct values and then on OK, they get properly registered in the catalog.

  For example, suppose that you analyze a file this morning.  The time will be 19/12/2009-08:21.  You then call adjust the Date and time and assign to the year 1970, month of May and the days to '? (and the time will be automatically set to unknown).   And then you click OK.  The date in the catalogue will be 5/1970 (with the day and unknown time). You call then adjust the Date and time again, and the year is already indicated in the window command in 1970, but the month is incorrectly pre-filled-APR (this is the bug).  If you click Cancel, the date in the catalogue remains unchanged at 5/1970.  If instead you change the month in May and then click OK, the command window, the date in the rest to 5/1970 catalogue.  Or if you change the year 1972 and the month of July, and then click OK< the="" date="" in="" the="" catalog="" will="" get="" changed="" to="">

• Get the former locations of the data files and Redo logs

  Version: 11.2
  Platform: Solaris 10
  
  When we manage hundreds of DBs, we do not know the locations of all DB files these allows DBs. say a DB goes down and you have all the required RMAN backups.
  
  When you restore the DB in a new location in the path of the new server, you must run the commands for the data files and ORLs below. But how do we know
  
  The former location of the data files.
  
  B. the old location of redo online stores that I can run
  
  run

  alter database rename file 'oldPath_of_OnlineRedoLogs' to 'newPath_of_OnlineRedoLogs' ;  --- Without this command , the restored control file will still reflect the old control file location

  run {
  set newname for datafile 1 to '/u04/oradata/lmnprod/lmnprod_system01.dbf' ;
  set newname for datafile 2 to '/u04/oradata/lmnprod/lmnprod_sysaux01.dbf' ;
  set newname for datafile 3 to '/u04/oradata/lmnprod/lmnprod_undotbs101.dbf' ;
  set newname for datafile 4 to '/u04/oradata/lmnprod/lmnprod_audit_ts01.dbf' ;
  set newname for datafile 5 to '/u04/oradata/lmnprod/lmnprod_quest_ts01.dbf' ;
  set newname for datafile 6 to '/u04/oradata/lmnprod/lmnprod_yelxr_ts01.dbf' ;
  .
  .
  .
  .
  .
  }

  Hello

  With the help of Oracle 11.2, you can use feature 'set newname for database' using OMF.

  SET NEWNAME FOR DATABASE TO '/oradata/%U';
  RESTORE DATABASE;
  SWITCH DATAFILE ALL;
  SWITCH TEMPFILE ALL;
  RECOVER DATABASE;
  

  After the restore and recover databases (i.e. before resetlog open) you can do to rename redolog. Just a query column member from v$ logfile and deliver ' alter database rename file 'oldPath_of_OnlineRedoLogs' to 'newPath_of_OnlineRedoLogs ';

  When we use the DSO is much easier to use OMF because Oracle automatically creates the directory structure.
  But when we use the file system that the OMF does not serve due DBA dislikes system generated on file system names.

  If you don't like OMF file system, you can use the script on thread below to help restore you using readable for datafile names, tempfile, and redo.

  {message: id = 9866752}

  Kind regards
  Levi Pereira

• command of the exp, can replace file?

  Hi all
  
  I m using the following command in the command under windows 2008 server file to backup an Oracle 10 g DB on a daily basis in a weekly cycle, if this backup dump of this Thursday can replace file last Thursday. I wonder if it really works like me, because I don't see any warnings shown after execution of the command, but the date of the file is changed. Also the content of the database has not yet changed, so the size of the DB cannot be invoked.
  
  @Set RQ = _ % DATE: ~ 11, 4% _backup
  
  @echo exp usr/pwd@db1 file=C:\UFO%RQ%.dmp log = C:\UFO_log.txt
  
  (not allowed to use the expdmp due to the co practice.)
  
  Thank you
  CS

  Yes, he does.

• groups-3 data urgent in the data model (bi pub 10 g do not show xml tags)

  Hello
  I have a requirement that the needs of data comes from 3 groups.
  In the 10g data model, I saw master - detail... like 2 groups
  
  How to reach 3 groups
  When I do, not able to see the 3rd Group (Group 3) xml tags
  
  Group 1
  -Select inv_id
  -Returns inv_id
  
  Group 2
  -Select col2
  where col2 =: inv_id
  
  Group 3
  -Select data where
  col_1 =: col2
  
  pelase help

  >
  Group 1
  -Select inv_id
  -Returns inv_id

  Group 2
  -Select col2
  where col2 =: inv_id

  Group 3
  -Select data where
  col_1 =: col2
  >
  Looks like that ok

  When I do, not able to see the 3rd Group (Group 3) xml tags

  What is the structure of article dataStructure?
  It can be as

  or post more information on the structure of article dataStructure

  I prefer unique identify related as columns

  group 1
  --select inv_id as grp1_ind_id
  --returns inv_id
  
  group 2
  --select col2 as grp2_col2
  where col2=:grp1_ind_id
  
  group 3
  --select data where
  col_1=:grp2_col2
  

  because I saw the case, then the columns with the same name does not properly

• How to format the data to a custom group

  Hi all
  
  I have a PivotTable with actual expenditures and Budget as some accounts and columns in the rows. Since I'm on the hierarchical column of account, I created custom groups for accounts using the component stages of selection. For example, I created a new group called Profit to combine 3 different accounts of profits and display a result row.
  
  Now I want to format the data for the group to profit. I right-click on the Profit Group, choose to change the Group and click the Format button on the lower left corner. I add a shape, for example the borders. When I now discover the PivotTable, borders have been applied to the label of the group, so the word Profit is now defined. However, the values in the columns of actual expenditures and Budget have not a border. Don't know what Miss me, but I want both the group label and the values to be formatted in the same way.
  
  How can I formatting the data values for the custom group?

  Hi user,

  Expected behavior, it won't format the actual values and the Budget. Only the group will be formatted.

  Kind regards
  DpKa

• View of rights only to the data store to the title of the specific group.

  I have a group of developers that I manage to their ESX host. However, I gave permissions to start/stop, snaps, etc. They showed their interest to be able to display information from the data store, so that they have an idea of how much space they use with all the clichés. So. What adjustment / settings do I need to check for them to get the rights from view.  I don't want that they have rights to the data center, there are other clusters, not to mention the developer cluster.  It would be very political, if I had to expose everything 'read only' under the view of data center.  Thoughts?

  Thank you

  It must give rights to the datacenter/host & clusters.  But this does not mean that we should give access to the cluster level.  You can ensure that you are not spreading the read access down to other objects.  Make sure, you can also add specific no access role on clusters under the root that you don't want them to see.

  -KjB

  VMware vExpert