closing lid when using display externial
What and where do I find the settings to have the laptop closed cover when you use an external monitor?
Thank you very much - works fine.
Thank you
Tags: Notebooks
Similar Questions
-
When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
Now everything works.
Thank you
B. -
When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command
Yes it will be displayed.
-
Displays swap when using double view on Satellite P100-437
Hello
I use display drivers downloaded from the Toshiba site for a P100-437, geforce nvidia go 7900 gs (v. 94.37)
My setup is such that I have a LCD monitor plugged into the back of my laptop that I use as my main screen and screen of my laptop is used a secondary antibody two-way. In Control Panel, you can decide which monitor to have on the left / right but whenever I reboot it reset back to normal. That is, it comes around so I have to move my cursor to the right to go to my laptop on the left screen.I was hoping that someone would have an easy solution for this. Thank you!
Hello
I m not 100% sure, but I think that there is not much to do.
I wonder how you selected the external monitor as primary monitor on your laptop because I can remember the old notebooks with XP OS did not this feature and it was not possible to use the external monitor as primary.But it seems that the new Vista operating system to provide this function.
However, in the Toshiba HWsetup utility, you will find the view tab.
There is a function called Power on screen this tab allows you to select the internal display or an external when the computer monitor starts.
Try to change it, and maybe it helps. -
Error message indicating the r300 display driver stopped responding when using the full screen.
Original title: driver atikmdag error message when using the full screen.
Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.
Hi Peterrichardson,
1. when exactly you get this message?
2. what player do you use?
3. you remember to make changes to the computer before this problem?
Method 1:
You can try to reduce the hardware acceleration and check.
a. click the Start button, Control Panel.
b. now, select appearance and personalization, and under display, select adjust screen resolution.
c. now, select adjust the resolution.
d. click Advanced settings.
e. now, click the Troubleshooting tab, and select the change settings button.
f. in the Security dialog box, click on continue.
g. move the hardware acceleration slider to the third notch.
h. click OK and restart Windows.
Method 2: Update your display driver
Updated a hardware driver that is not working properly
Hope this information is useful.
-
How can I get rid of the background yellow when I display an image using the photo viewer?
Original title: Windows Photo Viewer
How can I get rid of the background yellow when I display an image using the photo viewer? It gives images a yellow cast.
Thank you
Ed Fuller
How can I get rid of the background yellow when I display an image using the photo viewer? It gives images a yellow cast.
Thank you
Ed Fuller
Hi Ed
See the following for the patch thread.
Windows 7 photo viewer shows images with an orange and yellow tint:
Concerning
-
Another one: display interactive\text logoff scripts when using PCOIP
Hello
In my view, there a few other posts on this topic in the forums. Some remained unanswered, some are a few years old, so I thought I would try again. We have applied GPO logoff script that displays a reminder when using PCOIP session disconnects before that the script has the ability to run visibly. RDP works, but we don't\cant RDP because it serves various limitations. I am aware of a 2011 indicating post is not possible on 4.5, since it is 2014, hoping that progress could have been made about this feature. See you soon!
Fear not, there is no previous version of vs change in this regard. Except a few messages on the forums of communities that you mention, I don't think I've seen something official - you raise it using the feature request form or with a sales representative? Relying on interactive logoff scripts is usually not a good design for something like VDI - even if it were visible, if the customer is dislocated for any other reason, you would not be able to return to the session.
-
How can I do to block the main thread when to display a dialog box
I have a problem to block the user interface main thread when to display a dialog box (the dialog was created by the main Application), and when the dialog box is closed, the main Application can go to the next step.
Here is my code:
SerializableAttribute public class TitledPaneExample extends Application {}
instance of TitledPaneExample private;
StackPane mainModalDimmer;
/*
* (non-Javadoc)
*
* @see javafx.application.Application #start (javafx.stage.Stage)
*/
@Override
public void start (point primaryStage) bird Exception {}
instance = this;
primaryStage.setTitle (this.getClass () m:System.NET.SocketAddress.ToString ());
final StackPane layerPane = new StackPane();
layerPane.setDepthTest (DepthTest.DISABLE);
layerPane.setStyle ("background - fx - color: BLACK ;"); ")
Vb VBox = new VBox();
vb.setStyle ("background - fx - color: BLUE ;"); ")
vb.getChildren () .add new (Label ("1"));
vb.getChildren () .add (Label ("2")) new;
vb.getChildren () .add new (Label ("3"));
vb.getChildren () .add (Label ("4")) new;
Bt1 button = new Button ("bt1");
BT1.setOnAction (new EventHandler < ActionEvent > () {}
{} public void handle (ActionEvent event)
System.out.println ("bt1 trying to the new dialog box > > >");
Dialogue di = new dialog box (instance, "some trick here!");
System.out.println ("bt1 dialogue again successfully, try to show");
di. Show();
System.out.println ("bt1 dialog hide? < < < < ");"
}
});
vb.getChildren () .add (bt1).
layerPane.getChildren () .add (vb);
mainModalDimmer = new StackPane();
mainModalDimmer.setId ("MainModalDimmer");
mainModalDimmer.setMaxSize (Double.MAX_VALUE, Double.MAX_VALUE);
mainModalDimmer.setVisible (false);
mainModalDimmer.setStyle ("background - fx - color: RED ;"); ")
layerPane.getChildren () .add (mainModalDimmer);
Scene sc = new scene (layerPane, 800, 600);
primaryStage.setResizable (true);
primaryStage.setScene (sc);
primaryStage.show ();
}
/**
* Display the node given as a floating dialog on the entire application, with
* the rest of the application grayed out and blocked from mouse events.
*
@param message
*/
{} public void showModalMessage (message from node)
mainModalDimmer.getChildren () .add (message);
mainModalDimmer.setOpacity (0);
mainModalDimmer.setVisible (true);
mainModalDimmer.setCache (true);
TimelineBuilder
. Create()
() .keyFrames
new KeyFrame (Duration.seconds (1),)
new EventHandler < ActionEvent > () {}
{} public void handle (ActionEvent t)
mainModalDimmer.setCache (false);
}
}, new KeyValue (mainModalDimmer
. opacityProperty(), 1.
Interpolator.EASE_BOTH))) infrastructure)
. Play();
}
/**
Hide the any modal message that appears
*/
public void hideModalMessage() {}
mainModalDimmer.setCache (true);
TimelineBuilder
. Create()
() .keyFrames
new KeyFrame (Duration.seconds (1),)
new EventHandler < ActionEvent > () {}
{} public void handle (ActionEvent t)
mainModalDimmer.setCache (false);
mainModalDimmer.setVisible (false);
mainModalDimmer.getChildren () .clear ();
}
}, new KeyValue (mainModalDimmer
. opacityProperty(), 0,.
Interpolator.EASE_BOTH))) infrastructure)
. Play();
}
/**
@param args
*/
Public Shared Sub main (String [] args) {}
Launch();
}
Dialogue/public class extends TitledPane {}
private owner of TitledPaneExample = null;
instance of TitledPane private;
Dialogue (owner of TitledPaneExample, String message) {}
This.Owner = owner;
this.parentThreand = Thread.currentThread ();
This.instance = this;
this.setExpanded (true);
this.setText ("Dialog");
this.setMaxWidth (400);
this.setPrefWidth (300);
this.setMinWidth (200);
Label the tx = new Label ("message");
tx.setTooltip (new Tooltip (message));
tx.setWrapText (true);
tx.setContentDisplay (ContentDisplay.LEFT);
Bt button = new Button ("OK");
bt.setOnAction (new EventHandler < ActionEvent > () {}
{} public void handle (ActionEvent event)
masquer();
}
});
Sp ScrollPane = new ScrollPane();
sp.setHbarPolicy (ScrollBarPolicy.AS_NEEDED);
sp.setVbarPolicy (ScrollBarPolicy.AS_NEEDED);
sp.setContent (tx);
Hb HBox = new HBox (30);
hb.setPrefHeight (40);
hb.setAlignment (Pos.CENTER_RIGHT);
hb.getChildren () .add (bt);
BP BorderPane = new BorderPane();
bp.setCenter (sp);
bp.setBottom (hb);
this.setContent (bp);
}
{} public void show()
System.out.println ("dialogue show() 1 > > >");
owner.showModalMessage (instance);
System.out.println ("dialogue show() 2 > > >");
}
public void masquer() {}
System.out.println ("dialogue masquer() 1 > > >");
this.owner.hideModalMessage ();
System.out.println ("dialogue masquer() 2 > > >");
}
}
}I'm also interested in how to do this without the use of a step.
But, if you are ready to use a step for this, you can create a useful first step (without borders) with its owner being your current stage. Then, you can call the function showAndWait on stage that allows to block the thread of your application. For example, I implemented a DialogStage like this:
package hs.mediasystem.util; import javafx.animation.KeyFrame; import javafx.animation.KeyValue; import javafx.animation.Timeline; import javafx.event.EventHandler; import javafx.scene.effect.ColorAdjust; import javafx.stage.Modality; import javafx.stage.Stage; import javafx.stage.StageStyle; import javafx.stage.Window; import javafx.stage.WindowEvent; import javafx.util.Duration; public class DialogStage extends Stage implements Dialog { public DialogStage() { super(StageStyle.TRANSPARENT); this.setTitle("MediaSystem-dialog"); initModality(Modality.APPLICATION_MODAL); } protected void setParentEffect(Stage parent) { ColorAdjust colorAdjust = new ColorAdjust(); Timeline fadeOut = new Timeline( new KeyFrame(Duration.ZERO, new KeyValue(colorAdjust.brightnessProperty(), 0) ), new KeyFrame(Duration.seconds(1), new KeyValue(colorAdjust.brightnessProperty(), -0.5) ) ); parent.getScene().getRoot().setEffect(colorAdjust); fadeOut.play(); } protected void removeParentEffect(Stage parent) { parent.getScene().getRoot().setEffect(null); } protected void recenter() { Window parent = getOwner(); sizeToScene(); setX(parent.getX() + parent.getWidth() / 2 - DialogStage.this.getWidth() / 2); setY(parent.getY() + parent.getHeight() / 2 - DialogStage.this.getHeight() / 2); } @Override public final void showDialog(final Stage parent, boolean synchronous) { initOwner(parent); setParentEffect(parent); setOnShown(new EventHandler() { @Override public void handle(WindowEvent event) { recenter(); onShow(); } }); if(synchronous) { showAndWait(); } else { show(); } } protected void onShow() { } @Override public void close() { removeParentEffect((Stage)getOwner()); super.close(); } } -
screen saver turns on when using FaceTime
Since the update to MAC OS Sierra, I noticed that my screensaver activates when using FaceTime - most annoying because I have to quickly move the mouse to put it all again.
He didn't get it until I've updated from El capitan, so I guess it's something to do with MacOS Sierra.
He's not doing it with Youtube but I'm still trying with Skype.
Screen saver works as it should do it with an ordinary application (for example, safari, etc.) Pages) if I don't move the mouse or keyboard for the specified time (five minutes).
I do not have hot set of corners, the display is set on turn off (energy prefs is system) after 10 minutes. Screen saver is five minutes of inactivity.
I have an iMac 27 "retina, first generation (a little less than two years) with i5 and 16 gig memory, standard graphics M290X.
I missed easy adjustment here?
I have it, feel also my parents as well.
-
Distortions of the screen when using Firefox on Android
Hi, a recurring problem - when using Firefox on my Android Web site, are often distorted. If I try to zoom before to increase the size of police or image during playback, the screen breaks and distorts, with different sections of text and images disappear (black sections of the screen appear) or overlapping, often in a different font sizes. The Web site displayed on the screen as "jumps around." The same thing happens if I try to select text for copy - it is impossible to select all or selection is distorted. I have not had this problem before and noticed only recently. Almost impossible to use the browser now! What is the result of an automatic update of the software? Help, please! Thank you.
Please try to update to Firefox 38.
-
Strange glitch Visual on the taskbar when using Firefox
Hello
I feel a strange glitch Visual on the taskbar when using firefox.
Please take a look at this short video because it shows the problem, it's almost impossible to show in pictures.
https://DL.dropboxusercontent.com/u/12595174/VIDEO0016.3gp
I use firefox on Windows 7 Pro 64 bit v36.0.1. Video card is an ASUS R9 280 X using the latest drivers from AMD 14.12 Catalyst Omega Software.
Motherboard is an ASUS M5A88 with 16 GB of ram and a processor of 6300 FX.
It is a new construction that I have implemented in the last 24 hours, and this behavior was not present on the system using the same version of windows, firefox and even map chart and drivers. But on another card mother and CPU. Previous Board of Directors has been
M4A79XTD EVO with a Phenom II X 4 955BE.The glitching does not occur when it is on the desktop and firefox is closed. It will not occur when you use IE - 64 nor does it when I am using the steam software or any Explorer windows/opening files.
All the motherboard drivers are installed correctly, the integrated graphics card is disabled in the BIOS. I disabled the settings of firefox for hardware acceleration, smooth scrolling and text... to see if it was the question. It wasn't.
I'd appreciate any help to solve this... Really, I don't want to use a different browser but it's bad enough and quite distracting to really annoy me, and I don't see any alternative.
Thank you very much.
HHi jscher2000
I was about to post a reply, because a friend suggested that maybe that's a rendering of issue rather than a firefox one video card even if it's strange how it affected firefox only. I didn't have a chance to test it on Chrome as it is a new construction and I don't want to install the software, I do not use.
I went to the Manager of catalyst and had a glance to the settings. I changed something, but no help... I then started to make a simple change and test until I found that the activation "gpu up-scaling" in the properties of digital flat screens has solved the problem.
I am now free twinkle
Thanks for your quick response however.
-
HP photosmart 6510: error on hp photosmart 6510 showing-95 when using scan to email
My photosmart hp 6510 displays error - 95 when using scan to email. Help!
Hello @twinec, greetings!
Thank you for joining the Forums of HP Support! I came across the question you posted, and I want to help you with the best of my knowledge.
You can try a manual DNS address assignment to fix most of the analysis of the questions by e-mail. Try the steps mentioned below and check:
- Get the IP address of the printer, you can touch the 'Wireless' icon on the Control Panel printer to get the IP address.
- Type the IP address in your web browser to get the EWS page on your computer printer.
- Go to the 'Network' tab - click on "wireless (802.11), and then click «network address (IPv4)»»
- Click on the radio button that says 'Manual of the DNS server' and under manual type favorite 8.8.8.8 and manual replacement enter 8.8.4.4 (it is Google's DNS server address)
- Save the settings. Restart your modem, router and printer.
Let me know how it goes! Good luck
See you soon
Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!
-
Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?
I tried to plug it into my mac to transfer files locally but will not be displayed in the finder or disk utility. Anyone know why?
MacBook Pro (2015 retina) OS X 10.11.2 El Capitan
Have you shut down / turning your Mac off... power off the USB drive... Connect the drive to the Mac... start up the Mac... then, turn on the USB drive?
If no help, there are a number of posts to the thread in the forum El Capitan of support from users who have problems on their Mac USB. You can post there to see if anyone has the answers.
-
Deal with failure when using LabVIEW 2011 and DSC MODBUS communication
I'm currently reading from operating records a PLC with MODBUS/TCP. I confirmed that the PLC will update the values and in response to a MODBUS communication correctly by using a third-party program called Modbus Poll. However, when I try to query the PLC using the LabVIEW shared variable engine, I am unable to read the values of the same addresses that I consult with Modbus Poll.
My installation is simply to a PC directly connected to the controller via Ethernet without a router between the two. I'm using LabVIEW 2011 SP1 with the DSC module.
I opened the Manager of distributed systems OR to display the State of all variables in the Modbus Library that I created, and I noticed that the ILO CommFail permanently the value 'true '. All other variables with a 'read' access mode signal "failure of process". I tried to restart the process and stop and start the local variable engine without success. I also restarted my computer several times to see if any services did not exist, but this does not appear to have solved the problem.
Finally, I resorted to listening to communications on the network card I have the PLC connected via Ethernet using Wireshark and found that while Modbus Poll communicates with PLC, number of MODBUS and TCP packet is sent and received. However, when using only LabVIEW or the DSM OR communicate with the controller, there don't seem to be any communication on the network card.
Something that may be interesting to note is that I could communicate with the PLC and to read values with the DSM just once, when I understood everything first what address I should be reading of. All of this has stopped working shortly after. Prior to this, 'CommFail' was not generally set to 'true' with my current setup. Thinking it was my firewall, I have since disabled my firewall, but this seems to have had no effect on the problem either.
Any help on this would be appreciated.
So, I thought about it. It turns out that the IP address of the server i/o MODBUS must be set to the address of the MODBUS slave, not the local computer. The address of the i/o MODBUS server is defined by the navigation in the Explorer window projects, expanding the variable engine shared library for MODBUS and right click on the server MODBUS (for example Modbus1) item and select Properties.
In addition, the addresses seem to be shifted by + 1.
Thanks for the tip so.
-
Pavilion: How can I stop the screen size change when using mouse pad
I continue to adjust the size of the screen inadvertently when using the mouse pad - how to turn off this feature?
Hello
You can change this as follows.
Open windows control panel and on the top right, next to the display by: select "large icons". In the new page layout, select the entry of Synaptics.
The option you're looking for is called "Pinch Zoom" - see image below. Remove the checkmark against this article, click on close in this window, then apply then Ok in the previous window to save this change.
Kind regards
DP - K
Maybe you are looking for
-
Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.
-
Flash DRIVE (16 GB from Toshiba PA3875A-1MAB) not to message format
A few months ago, I bought two disks USB 16 GB with the intention to use as a convenient medium for some data files for me and my wife on separate PCs, which were all two Dell Windows XP desktops. I used my drive a few times, thinking that everything
-
When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host. I need help Kind regards
-
Every time you start, my pc first says Stlog.dll failed, then passes through the diagnostic process and says it can not find a solution and tells me to reinstall the program. I can not even find this program. Help, please
-
compare the value of loan to a virtual machine: vRops vs. vCenter
Helloduring the analysis of the values of a virtual machine cpu, I noticed value "ready" is not too much to skip between vCenter and a report of vRops.After watching a few reports more it turns out that the value of ready in the vRops report appear t