Closing problems and associted M30-304 blue scree

I have a toshiba m30-304 and until well worked recently it won't stay connected to the wireless network and now the blue screens before stopping. When restarting, everything is ok, even down to be connected to the wireless network.
I recovered and installed the new drivers and bios, but the fault is always apparent. error message for microsoft bed
BC code: 1000000a bcp1:6883ffd2.bcp2:00000002.bcp3: 00000001.bcp4:805140E4 OSver5_1_2600 product SP:2_0 768_1
also of lists (1) C:\docume~1\alank1~1\locals~1 \temp\wer1773diroo\mini011606~01dmp
(2) c:\docume~1\alank1~1\locals~1\temp\wer1773dir00 \sysdata xm1

Please can someone decipher? Or advise any code blue screen it stops at quick.

Thank you very much

Hello

If someone has written so far, it is not easy to say why the problem occurs. Who knows what you did last time with the unit done?

Have you tried to restore the operating system on time earlier?
What you mean with recovered? Preinstall the device using a Toshiba recovery media? If you think that this is caused by the network card wireless remove from Device Manager and reboot the device.

I found a lot of different forums to similar theme but I have not found any concrete solution.

Tags: Toshiba

Similar Questions

  • WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

    While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

    Hello

    Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

    Readers on the following links are examples that would be perfect for your laptop.

    Hard drive 500 GB

    750 GB hard drive.

    1 TB laptop hard drive.

    The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

    About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

    http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

    Kind regards

    DP - K

  • After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture. What could be the problem and how to fix?

    After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture.  What could be the problem and how to fix?

    Hello

    Looks like a loose connector or a short circuit in the video cable. Check with a real
    store computer (one that works on computers cell phones internal ASUStek) or ASUStek
    Support, their documentation and online in their forums.

    Not a maintainable question by the user.

    ASUStek support
    http://support.ASUS.com/

    ASUStek Forums
    http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

    ASUStek drivers
    http://support.ASUS.com/download/download.aspx?SLanguage=en-us

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the faulitng module error

    original title: problem with shdocvw.dll

    Hey guys just a quick question.

    bascailly, I'm working on the first line of support for a company and we have created a software for the United Kingdom NHS, basically our software is used by doctor general practitioner through the United Kingdom to read documents electronically.

    a question we seem to become much lately is certain parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the module faulitng error. When event viewer is selected the below appears.

    Failing application dme7_client.exe, version 7.1.0.270, failing module shdocvw.dll, version 6.0.2900.6212, address 0x000b26fe failure

    It seems that the only way to solve this problem is the newspaper on a differnet and use them as seems to be the specific user. does anyone have any ideas of what we can try to solve this problem without obiously the user with a different account?

    see you soon

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.

    You can follow the link below to ask your question:
    http://social.msdn.Microsoft.com/forums/en-us/categories

    I hope that helps!

  • Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

    Generic host win32 problem...

    HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

    Hello

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 2: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: Follow the steps in the article.

    How to troubleshoot a network home in Windows XP

    Windows wireless and wired network connection problems

    For reference:

    How to reset the Protocol Internet (TCP/IP)

  • I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

    I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

    Hello

    He got this 1 day, or has it just begun?

    If it was always this way, it could be a manufacturing defect or your advanced display settings may be incorrect. The latter can be determined according to the settings/Advanced/display/personalization in the control panel settings. See Customization here, it varies depending on the manufacturer, but you focus on controls that adjust color output.

    If it has started, then it is possible the monitor had a malfunction. I put another monitor (if available) on the system. If the problem persists, then the fault is in the video card or display drivers. If it disappears, then the monitor can go wrong (you can try to adjust the settings on the screen itself to see if it has no effect). If it turns out to be the graphics card, I would like to firstly download and install a new set of drivers for the graphics card or the manufacturer of the system (the best for download, then uninstall the current set restart and install the new download).

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • The blue screen of death error your PC encountered a problem and needs to restart. and we will launch it for you

    I use a desktop computer, Dell XPS 8300, the blue screen looks like this

    " :( Your PC has encountered a problem and needs to restart. "and we will restart it for you.
    Then a blue screen that says:
    «Your pc is not properly start the automatic repair press on restart to reboot your PC, which can sometimes solve the problem.» Alternatively, you can press Advanced Options»
    NONE OF THESE WORK
    I can get the boot menu by pressing F12 at startup, NONE OF THESE OPTIONS WORK

    Help, my computer has been down for a week.

    Hello

    Thanks for posting your query to the Microsoft Community. Sorry for the delay in responding.
    Please go through the steps in this article and check if it helps.

    Resolve stop (blue screen) error in Windows 7

    Hope that the information provided has been helpful and let us know if you need more help. We will be happy to help you.

  • Since the installation of money, more sleep Sun, when I open money, a box appears immediately shows "money has encountered a problem and must be closed.

    Original title: impossible to go beyond opening money PlusSunset

    Since the installation of money, lie the Sun when I open money, a box appears immediately watch "money has encountered a problem and must be closed" I had deleted the previous money programs before installing the new version and visa versa with the same results. At the top right of the new version installed, opening his shows "Download" continuously and does not allow me to go no more like it is stuck. I tried each fund repairs suggested two days and still not able to locate the problem. Any help out there? Thank you.

    Hey Mac,

    To come back and let us know that the information helped thanks.

    As mentioned in the previous post to solve any money related question, you can post your request in support of money Forums.

    Microsoft Money Forum

    If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

  • Windows 8 Light Blue error screen: your PC Ran into a problem and need to restart

    Every once a while I reboot my windows, I had a light blue screen that says "your PC came across a problem and the need to restart.
    Is there anyway I can know what is the problem, I don't want to reinstall windows again, please help
    Here is a link of my Minidump files:

    https://SkyDrive.live.com/redir?RESID=38EC4E1D886E0DA8! 105

    Thank you!

    The minidump files showed a BAD_POOL_HEADER stop error (19) caused by the MacHALDriver.sys:

    BUCKET_ID: 0x19_20_MacHALDriver+ 1714

    Bootcamp.exe is the process that blocks.

    Try the following link to get suggestions for this problem:

    https://discussions.Apple.com/thread/4466080?start=0&TSTART=0

  • Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

    Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

    https://www.dropbox.com/s/2dtm74f6ki7goa4/minidump.zip

    DAG

    These were related to your driver atheros wifi athw8x.sys I would like to re - install the latest driver available.

    If you continue to plant I remove Symantec and use the built in Defender

  • Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.  Error code: c0000005 address: 76f73ac3 I clicked the OK button and the closed Downloader.     I then tried to download from the Organizer. I have

    Photoshop Elements 12

    Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.

    Error code: c0000005

    Address: 75e32f71

    I clicked on the OK button and the closed Downloader.

    I did a search on this (c0000005) error code and it seems to be a work around, but no solutions, why is this? I ask that because that this problem seems to be years and years, dating back to at least 2005 (math is 10 years do).

    I don't even have the hanging camera and I get this error on download.  I have redownloaded everything and reinstalled.  I allso see AVI issues reported with this problem, so I've updated Quicktime that without the camera being hung when I get this error I wasn't expecting it to work.  I tried to support and they would not help because I bought it in March this year.  Quite frustrating because I bought elements about every 2 years.  I think I might need a new codec?   I had this problem on an earlier version and I think I remember that being the fix, but it may be something completely different

    Finally, I found it lacking a photo so the catalogue was "corrupted".  I just deleted the image and it started working.

    I hate Adobe and their total lack of support - thanks for nothing Adobe.  Also get this - they offered me to upgrade to 13.0 (12.0 My is only 6 months old but they still can't stand on errors.  Install only the errors!

    I've upgraded and buy this product 4 times now.  I'll find something else next time!

  • C:\windows\system32\xpsviewer error opening message has encountered a problem and must be closed.

    I am trying to open MS C:\windows\system32\xpsviewer, currently running on MS XP Professional.

    Get an error message whenever I try to open XPS.

    The message reads "XPSViewer.exe has encountered a problem and needs to close. We are sorry for the inconvenience ".

    I tried looking for the answer, but they seem to relate to MS Vista or 7?

    I wasn't sure what I should put it in so I chose programs?

    Best regards

    Anthony Tidey

    I would like to uninstall the XPS Viewer, then download and install a new copy.

    I don't know where you got your copy of Microsoft XPS Viewer, but it was packaged with XPS Writer in the Microsoft XML Paper Specification Essentials Pack

    I have not downloaded this, but I think that you don't have to install the XPS writer if you do not want to.

  • Need good drivers for Satellite M30 304

    I have a Satellite M30-304. I rebooted the laptop and formatted everything, including pilots. Unfortunately I have lost my CD of restoration as well. So, I tried to download it online on the official website but I downloaded the wrong drivers making my laptop more low and I can't even use my special functions of the keyboard and my screen become darker.

    Does anyone know how to download the right drivers and whence?

    Hello

    In my opinion the wrong drivers are not responsible for these problems, but of course, you should be 100% sure that you have installed the correct drivers!
    Unit you seems to be a part of the PSM30E series.

    Need to select the model of laptop and this part number in the download form. All that s

  • My M30 304 will support a new 160 GB HARD drive?

    Hello

    Problems with Windows at the moment so I was going to reinstall. But think I can replace it with a larger HARD drive (160 GB Seegate) - my M30 304 will support it? Only was told to check if the bios would support it?

    Can anyone help?

    Thank you

    Simon

    Hi Simon

    The info is right on BIOS support. The new Toshiba notebooks have HARD drive with a maximum capacity of 100 GB and I really put t think you will success with 160 GB.

    If you buy the HARD drive and it doesn t work usually you have 14 days to return the product. Talk to your local dealer.

  • Laptop HP 15: your PC encountered a problem and needs to restart

    DESPERATELY NEED HELP
    Received a HP Notebook 15 Pc in February 2016.
    Search birthday gifts for husband last night, and when I return from additional research, I get a screen showing.
    "Restart your PC on a problem and needs. We will provide for you.
    "" If you want to learn more, you can find: ntsf_file_system "(or fat_file_system).

    I'very is part of research and hear that this amounts to the blue screen of death...
    My windows disk that I keep reading I need was preinstalled on the computer when I got it, AND I have a lot of important files on this computer (IE. Family photos, the birth of my son, important work files, etc.)

    I've never been so stressed on a computer, before...
    I have a project to work on this thing that is due on Tuesday and I can't do same passet this stupid screen
    And when I try to HP support, they are closed because of the time and the holidy

    Is there anyone who might be able to help me or give me advice?
    I can't take it into a repair shop either because because of holiday... theyre closed. And I've hardly have enough money to get to the pay day!

    PLEEAAASE help?

    Ok.  You must follow this:

    http://www.support.HP.com/us-en/document/c04593971

    First try step 1. Hard reset.

    If it does not proceed to step 4. and follow the instructions to restore to the point when Windows 10 or 8 cannot start.

    Let me know the result.

Maybe you are looking for