Cluster of Freeway with deployment of FW DMZ port 3

Similar Questions

• VCS - C cluster and Cluster VCS-E with Movi 4.6 register and call interruption

  Hi all

  We have VCS - C cluster and Cluster VCS-E with Movi 4.6 register and call interruptions. The point is, if the appeal or record comes from the Internet. We have the sip proxy model vcse--> vcs - c record. The strange point is, if run us in mode not cluster with only 1 vcs - c, then the call works very well or so over 1 minute. We also have findme. The call internal registered locally (VCSC) works as well) the case appears if the active VCS - c cluster and the movi has been listed in the subzone of the crossing of VCS - c
  VCS versions are x.7.2.2 and tms 14.2.2
  Thx for your comments

  Sent by Cisco Support technique iPhone App

  Hi friend

  The issue you are experiencing is a known limit of Jabber of telepresence. This happens when registration of the device is transmitted by proxy to the VCS control, where VCS are clusters. Probably what is happening:

  -Jabber client records through the fast track to a control in the area of the highway crossing.

  -L' check requires authentication

  -When the customer registers again every minute (registration of SIP (re) process normal), the registration request is sent to one of the other controls in the cluster.

  -The customer then completes the current record and authenticates back to the other control

  -The client (Jabber) will tear down the ongoing call when there is re - authenticate registration

  This problem is resolved in the current version for Jabber for iPad. The current version of Jabber for TelePresence still has this problem. Default: CSCud17952

  Another user has reported the same issue. See the following:

  https://supportforums.Cisco.com/message/3967325#3967325

  Zachary Colton gave the answer. I simply copied his explanation and pasted here.

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• Hyperion Planning error - 'Out of Sync with deployment. "

  I'm trying to deploy the application, I created in Hyperion planning 11.1.2.1. When I click in deploying, I get the message, "Out of sync with deployment."
  
  In the window of console work, the State is displayed as "completed with errors. I tried to click the MESSAGES link under attachments to check for errors. But the window opens and closes immediately.
  
  Can someone please tell me where I can find the error logs.
  
  In addition, no idea why I'm having this error. I've validated the dimensions and has not encountered any errors.
  
  See you soon,.
  Prishan

  Hi, you must enable downloads of files for your browser.
  It's in Internet options-> trusted sites-> custom level-> downloads (for IE)

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• 'Web Deployment agent service' using port 80.

  Hello community,

  After I uninstalled ampps (alternative to Xampp) and re installed, I get a message that port 80 is used by another application.
  I discovered in "Windows Task Manager" than (NT Kernel & System) was the culprit. After Googling further concluded that "Web deployment agent service" use port 80.

  C:\Program Files\IIS\Microsoft Web Deploy\MsDepSvc.exe' - runService: MsDepSvc

  What I've done so far was out of "MsDepSvc.exe" by spacing it epSvc.exe MsD.

  I want to know is why IIS start using port 80. Because ampps do not complain about it before!

  And what is the solution. How can I change the port for IIS?

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Cannot send Emails from Windows Live Mail Windows 7 but can rec Emails Ok comes with Live Mail error ID Port 25 socket 10013 Error 0x800CCC0E

  WINDOWS 7 CANNOT SEND EMAILS FROM WINDOWS LIVE MAIL BUT CAN RECEIVE EMAILS OK. COMES WITH LIVE MAIL ERROR 0X800CCC0E PORT 25 ID AND SOCKET 10013 ERROR

  Please don't SHOUT!
   
   
  
  Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all
   
  Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste into the thread. Just the number of code alone is not enough.
   
   
   

• Configure a cluster of vsphere with 2 host with internal storage shared via HP LeftHand - doubts

  Hi, I'm trying to create a two-node esxi cluster. These nodes will share their internal storage with HP Lefthand Appliance (HP StoreVirtual VSA). I need the first steps to create the cluster, or better, the macro blocks, IE:

  -install esxi on each node
  -install Virtual Center and create the vmware cluster

  -Deploy the VM VSA...

  I have a lot of doubts because of the reason why I can't have (installation of the HP guide said) virtual machines on other than the VM VSA itself VSA data store. How can I configure things? Creating first two warehouses of data, deploy VCenter on a data store, create the cluster, deploy VSA VM on the other data store...

  Can you help me please?

  DL380G5 host as the location for the ODM is ok, but you may need to upgrade the host in any case since v12 FOM requires ESXi 5.0 or newer.

  ... what happens if the update fails and the hypervisor does not start more?

  I know we can't answer a question with a question. Anyway, how do save you virtual machines on this host now?

  It is true that the VSA VM cannot be migrated, but I can migrate the VCenter to a to another data store when I will have created the DATA of VSA data store (one that the hypervisor consider as an iSCSI target), I'm good?

  I'm sure that it is correct. Unless I'm missing something, vCenter Server is just another virtual machine running on the cluster VSA VSA does not require vCenter Server to run.

  André

• merge with deployed FireFox favorite silently

  Hi all
  I am trying to create a deployment for FireFox on our network of company (always under XP).
  {There is the problem that I have, / a lot of people who already have a manually installed installed FF version and I need to create a deployment that "takes over" the current installation, including all the settings for the %userprofile%\Application Data\Mozilla\Firefox\Profiles\{FF.profile}.
  Located in this path is the file places.sqlite to bookmarks. If I were to create a full copy on / editing of the %ProgramFiles%\Mozilla Firefox and the location of the profile above, would give a nice clean install of SOE, he would write more than the currently marked with a bookmark URL.
  Part of the deployment, asked me to provide 6 URL in bookmarks.

  Here's the tricky question (Google failed me on this one here), how can I inject 6 URL (preferably at the top of the bookmarks) in the deployment of FF without wiping the current bookmarks belonging to the user and still 'clean' installation completely silently?

  is it possible to list them in mozilla.cfg, prefs.js or something for the injection to the deployment?

  Thanks in advance for any information.

  Edit: even if I run the wizard import in silence, that would be ok as well.

  right - it sounds like this cannot be done using a feature of Mozilla. I had to write a script for (on screen) buttons to open the library, import the bookmarks to the server (env var) file type and location of the file.
  I have written in Autoit 3.3.8.1. I won't post here, because of our policy work, it was developed in the time of work, it is up to the job.
  The script is close to 180 lines, took me about a week to write (not a very experienced scripter) with full error checking and window existence of. However, with the way some of the FF Windows are written, there is no element of control to identify and use some windows and buttons.

  If you me message I might be able to guide you in the right direction

• Problems with deployment of network shared on windows PC when installing INSTALLER variables

  Hello

  I'm using LabVIEW 2014 on Windows 7. I have a project that is developed to be a client GUI (192.168.1.208). The GUI communicates with an application of RT (192.168.1.206) running on LV RT OS and both are connected to a network. The NSV (shared network variables) are housed next to the RT (SVs is on RT/demand side project). This part (communication and everything) works very well.

  Now another part is recording data. Why NSV (hosted in the GUI project) are used for strings of communincate (events with the data) to a computer running the registration of data on this PC (192.168.1.208) server. Please note here, currently same PC (192.168.1.208) was used for recording the data server implementation, but later, there may be a new PC that's why NSV is used. I gave this information in case there may be no problem (chances are though).

  

  I created an application (*.exe) and the project GUI installation program. Saving data to the PC (192.168.1.208) if I use one of the options-project/*.exe/installer works supposed. but when I try to install this Setup program on another PC on the network which has no service OR installed gives following error during installation:

  Deployment deployment failed shared Variables.lvlib\\192.168.1.109\Shared Variables (error:-1967362042, operating system and Network Services: (Hex 0x8ABC7006) could not start service.).

  I have tried almost all the variations in the construction of Installer and .exe for it, but couldn't get rid of this error.

  I also want to know how would be a PC not having not OR services/programs installed would host OR shared Variable engine. Although application of the runtime in the application, we give option while building the .exe. But not for the EVS.

  I lost several weeks on this issue of emergency assistance would be much appreciated.

  Thank you.

  If you uncheck the option "selection auto installers" in installer build specification, it should give you the full list of installers, you can include. It's a little weird that it has not detected the requirement of NSV, however.

  I think you make you life difficult for yourself by trying to do a few odd handshakes with strings/NSV - NSV is 'tag' data - they are good for the reading of the last value of a variable/signal. If you want to send messages around - stream, network - there is even something like reference e-mail Simple (STM) library - http://www.ni.com/example/27739/en/

• Problem with deploying Qt applications on playbook

  I'm just starting the native BlackBerry development. So the questions can be silly. I'm developing an application that requires a rich user interface. So I googled a bit and found that SDK native BlackBerry tablet OS was support for Qt I downloaded Qt for BlackBerry from github. I created a small window with a Hello World label and a text field. I've deployed it on my playbook. Everything went well but the problem is there's just too much time. Is it normal to take so much time? (like 10-15 minutes) And is there one better alternative to the use of Qt?

  Another thing I would be able to use the basic features of the native user interface using Qt? As recording and playback?

  For BlackBerry 10 there is the waterfall framework integrated into the IDE. Is there something similar for the playbook? Please help me find some answers.

  Hello

  For applications with no qml Qt database, I have these libs in my deployment folder:

  libQtCore.so.4,  libQtNetwork.so.4,  libQtOpenGL.so.4,   libQtSvg.so.4,
  libQtGui.so.4,     libQtXmlPatterns.so.4
  

  For qml applications, I have these:

  libQtCore.so.4,        libQtNetwork.so.4,  libQtSql.so.4,          libQtXml.so.4, libQtDeclarative.so.4,  libQtOpenGL.so.4,   libQtSvg.so.4,
  libQtGui.so.4,          libQtScript.so.4,   libQtXmlPatterns.so.4
  

  There are many examples and tutorials delivered with Qt, but also a wealth of information on the web.

  You can include the header bps file in your Qt application to use the native functions for the playbook and there are some examples here to access sound, etc.

  Good luck!

  Jon

• Problem with deployment on Simulator ("program file does not exist")

  Hello

  I currently have a problem with a project, I can't deploy it more in the Simulator: I always get an error "the file does not exist.

  The project itself can be compiled without any isse. I can also deploy the application on my phone without problem. But when I'm trying to deploy on the virtual machine, it says:

  Program file does not exist
  /Users/..../HFR10/arm/o.le-v7-g/HFR10 not found
  /Users/..../HFR10/arm/o.le-v7-g/HFR10 not found
  /Users/..../HFR10/arm/o.le-v7-g/HFR10 not found
  

  # the application is called, HFR10...

  What is strange, is that it looks at the folder "arm", which does not exist when I compile for the virtual machine since the architecture should be "x 86"... ".

  In the x 86 folder, I can find the compiled application...

  I tried to update the descriptor of bar:

      
         armle-v7
         HFR10
      
      
         Qnx/Cascades
         armle-v7
         HFR10.so
      
      
         armle-v7
         HFR10
      
      
         x86
         HFR10
      
  

  And modified the Simulator-Debug field that used to point to the folder 'arm '...

  but after a cleaning + reconstruction, I line have the same error, and he always looks inside the arm folder...

  No idea of what the problem is? This problem appeared when I moved from momentic 2.0 to the 2.1 beta...

  But I guess that he changed something in the configuration file, because even if I go back to momentic 2.0, I still have it exactly the same problem...

  Thank you!

  UM... In the dialog box "edit configuration", I spend 'use the workspace settings' to "Enable auto build" and it works to restarted...

  

  It's strange, the application was already built and available in the x 86 folder...

  In any case... Perhaps it would be useful for someone else...

• PIX with H & S VPN DMZ hosting web server to the hub

  Ok

  Heres a problem which I think would be quite common for these even remotely conscious of security. Unfortunately, my knowledge of the PIX (as well as other Cisco devices) is still in phase of 'growth '.

  So, here's the problem. I have a WAN put in place with PIXen and SonicWalls, we are set up in a design essentially Hub and Spoke (fine ok so it is partially meshed). We recently decided to pull the trigger on getting a 'real' web site and everything went relatively well that getting up and rolling. (even with my notice of 3 days/deadline), but here's the problem: I set up the web server on the DMZ to the hub pix, and I figured out (the easy part) how to set things so in the Home Office, people can connect to the web server by using the internal address, but I don't know what to do for people in remote offices with VPN home connections. I tried to define static routes, I tried to add the DMZ to the VPN trigger, I tried to do both of the last things together, and I checked that I have rules allowing traffic to the VPN outside the DMZ on the inside. So, what else can I I get?

  I have no problem by configuring a PIX for all basic ups and VPN even at this stage, I can do most of it through the CLI (even if I still want to do more through the PDM). My biggest stumbling block on the PIX has so far was when I actually involve this pesky DMZ...

  I actually two PIX in my office, two for my network domestic (one for my place in the States and one for my place in the Japan), so if you can help me, I'll be the two problems and do not forget to give a rating of excellent reviews!

  so I guess that leaves me to the place where I scream...

  Help!

  and I humbly await your comments.

  the current pix configuration should look at sth like this,

  IP access-list 101 permit

  IP access-list 110 permit

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp-3des esp-md5-hmac superset

  myvpn 10 ipsec-isakmp crypto map

  correspondence address card crypto myvpn 10 110

  card crypto myvpn 10 set by peer

  superset of myvpn 10 transform-set card crypto

  interface myvpn card crypto outside

  ISAKMP allows outside

  ISAKMP key

   address netmask 255.255.255.255
  
  isakmp identity address
  isakmp nat-traversal 20
  isakmp policy 10 authentication pre-share
  isakmp policy 10 encryption 3des
  isakmp policy 10 hash md5
  isakmp policy 10 group 2
  isakmp policy 10 lifetime 86400
  now, to add dmz on top of the existing vpn, add the following to the pix (and apply the same concept on the remote end device)
  access-list 102 permit ip
  access-list 110 permit ip
  nat (dmz) 0 access-list 102
  

• User definable VM names with deploy from vCAC?

  Is there a way to allow a user to specify a virtual machine name when they apply for a VM in vCAC?

  We want to be able to specify a "descriptive of the environment" for deployed machines.

  So far I was able to specify a prefix of the machine. So that I could create 20 different models with different prefixes, it's just awkward and not really an acceptable option.

  vCAC Build 6.0 - 1720522

  Thank you

  Once again, you will need to use custom properties to do.

  Read this paper to find out what they are and how they work

  http://pubs.VMware.com/vCAC-60/topic/com.VMware.ICbase/PDF/vCloud-Automation-Center-60-custom-property-reference.PDF

• After the launch of VMMark 2.52 no score with deploy

  Hello

  Help to check the result of newspapers?

  What will happen with DeployVM?

  I tried to use manual way to do DeployVM and success, but I did not understand why no score under deploy part.

  My configuration:

  Storage use 3 storage lun of the CF and name like vmmark, vmmark2, vmmark3.

  Physical server for Primeclient.

  vCenter55, client0, client1 is a virtual computer in the same physical server.

  put VM 2tiles KNEW 2 as a physical server.

  Thanks for your help.

  Hi Mark,

  No, I mean the VMware tools in the model used for deployed operations.  See the section called "Preparing the model to deploy handling" in the current version of the Guide VMmark benchmarking for full instructions, which should have all the information you need.

  Thank you

  Joshua

• Installation problem of local cluster of consistency with the WKA (well-known-address)

  Hello - I started using WKA local consistency with single node cluster, but when I launch CacheFactory (coherence.cmd) with the same configuration, he throws after error message.

  Any help is appricicated.

  Startup JVM Arrgument

  -Dtangosol.coherence.override =cluster.xml

  cluster. XML

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < consistency xmlns =" http://xmlns.Oracle.com/coherence/coherence-operational-config "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " xsi: schemaLocation = " http://xmlns.Oracle.com/Coherence/Coherence-Operational-config http://xmlns.oracle.com/coherence/coherence-operational-config/1.1/coherence-operational-config.xsd" > ""

  <>cluster-config

  unicast-listener <>

  < well-known-address >

  < code socket-address = "1" >

  < address >171.193.103.25< / address >

  < port >8088< / port >

  < / socket-address >

  < / well-known-address >

  < / unicast earphone >

  < / cluster-config >

  <>logging-config

  stdout < destination > < / destination >

  > < 9 severity level < / severity level >

  < / operational forest-config >

  < / coherence >

  Cluster Message startup

  WellKnownAddressList (size = 1,
  WKA {address = 171.193.103.25, Port = 8088}
  )

  () MasterMemberSet
  ThisMember = member (Id = 1, Timestamp is 2013-10-24 11:07:18.603, address = 171.193.103.25:8088, MachineId = 9041, location = site:, machine: FD4C9EF534D5D, process: 16704, role = CoherenceServer)
  OldestMember = member (Id = 1, Timestamp is 2013-10-24 11:07:18.603, address = 171.193.103.25:8088, MachineId = 9041, location = site:, machine: FD4C9EF534D5D, process: 16704, role = CoherenceServer)
  ActualMemberSet = MemberSet (Size = 1
  Member (Id = 1, Timestamp is 2013-10-24 11:07:18.603, address = 171.193.103.25:8088, MachineId = 9041, location = site:, machine: FD4C9EF534D5D, process: 16704, role = CoherenceServer)
  )
  Member ID | ServiceVersion | ServiceJoined | Member State
  1. 3.7.1. 11:07:48.843 2013-10-24 | JOINING
  RecycleMillis = 1200000
  RecycleSet = MemberSet (Size = 0
  )
  )

  TcpRing {connection = []}
  IpMonitor {AddressListSize = 0}

  2013-10-24 11:07:48.869/31.794 Oracle coherence GE 3.7.1.0 < D5 > (thread = Invocation: management, Member = 1): service management joined the cluster with the senior members of the service 1
  2013-10-24 11:07:49.058/31.983 Oracle coherence GE 3.7.1.0 < D5 > (thread = DistributedCache, Member = 1): Service DistributedCache joined the cluster with the senior members of the service 1
  2013-10-24 11:07:49.077/32.002 Oracle coherence GE 3.7.1.0 < D6 > (thread = DistributedCache, Member = 1): Service DistributedCache: PartitionConfig ConfigSync sending at all
  2013-10-24 11:07:49.121/32.046 Oracle coherence GE 3.7.1.0 < D5 > (thread = ReplicatedCache, Member = 1): Service ReplicatedCache joined the cluster with the senior members of the service 1
  2013-10-24 11:07:49.128/32.053 Oracle coherence GE 3.7.1.0 < D5 > (thread = OptimisticCache, Member = 1): Service OptimisticCache joined the cluster with the senior members of the service 1
  2013-10-24 11:07:49.131/32.056 Oracle coherence GE 3.7.1.0 < D5 > (thread = Invocation: InvocationService, Member = 1): Service InvocationService joined the cluster with the senior members of the service 1
  2013-10-24 11:07:49.132/32.057 Oracle coherence GE 3.7.1.0 < Info > (thread = main, Member = 1):
  Services
  (
  ClusterService {name = Cluster, status = (SERVICE_STARTED, STATE_JOINED), Id = 0, Version = 3.7.1 OldestMemberId = 1}
  InvocationService {name = management, State (SERVICE_STARTED), Id = 1, Version 3.1 = =, OldestMemberId = 1}
  PartitionedCache {Name = DistributedCache State = (SERVICE_STARTED), LocalStorage = active, PartitionCount = 257, BackupCount = 1, AssignedPartitions = 257, BackupPartitions = 0}
  ReplicatedCache {Name = ReplicatedCache, State = (SERVICE_STARTED), Id = 3, Version = 3.0, OldestMemberId = 1}
  Optimistic {Name = OptimisticCache, State = (SERVICE_STARTED), Id = 4, Version 3.0, OldestMemberId = 1}
  InvocationService {Name = InvocationService, State = (SERVICE_STARTED), Id = 5, Version = 3.1, OldestMemberId = 1}
  )

  DefaultCacheServer started...

  CacheFactory error message

  C:\Users\Zk5rjg8 > C:\coherence37\bin\coherence.cmd
  * From storage off the console *.
  Java version "1.6.0_51".
  Java (TM) SE Runtime Environment (build 1.6.0_51 - b11)
  Java for 64-bit Server VM (build 20, 51 - b01, mixed mode)

  2013-10-24 11:13:22.851/0.392 Oracle coherence 3.7.1.0 < Info > (thread = main Member, = n/a): responsible operational configuration of "jar:file:/C:/coherence37/lib/coherence.jar!/tangosol-coherence.xml".
  2013-10-24 11:13:22.920/0.462 Oracle coherence 3.7.1.0 < Info > (thread = main Member, = n/a): responsible for operational substitutions of "file:/C:/coherence37/cluster.xml".
  2013-10-24 11:13:22.924/0.465 Oracle coherence 3.7.1.0 < D5 > (thread = main Member, = n/a): configuration optional override "/ custom - mbeans.xml ' is not specified
  2013-10-24 11:13:22.924/0.465 Oracle coherence 3.7.1.0 < D6 > (thread = main Member, = n/a): loaded data edition of "jar:file:/C:/coherence37/lib/coherence.jar!/coherence-grid.xml".

  Oracle Version 3.7.1.0 Build 27797 consistency
  Grid edition: development Mode
  Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.

  2013-10-24 11:13:23.722/1.263 Oracle coherence GE 3.7.1.0 < D4 > (thread = main Member, = n/a): TCMP linked to /171.193.103.25:8090 using SystemSocketProvider
  2013-10-24 11:13:54.001/31.542 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): this Member(Id=0, Timestamp=2013-10-24 11:13:23.762, Address=171.193.103.25:8090, MachineId=9041, Location=site:,machine:FD4C9EF534D5D,process:17192, Role=CoherenceConsole) tried to joi
  2013-10-24 11:13:54.001/31.542 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): delay the formation of a new cluster. waiting for well known address nodes
  2013-10-24 11:14:24.402/61.943 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): delay the formation of a new cluster. waiting for well known address nodes
  2013-10-24 11:14:54.805/92.346 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): delay the formation of a new cluster. waiting for well known address nodes
  2013-10-24 11:15:25.207/122.748 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): delay the formation of a new cluster. waiting for well known address nodes
  2013-10-24 11:15:55.610/153.151 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): delay the formation of a new cluster. waiting for well known address nodes
  2013-10-24 11:16:26.012/183.553 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): delay the formation of a new cluster. waiting for well known address nodes
  2013-10-24 11:16:56.414/213.955 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): delay the formation of a new cluster. waiting for well known address nodes
  2013-10-24 11:17:26.817/244.358 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): delay the formation of a new cluster. waiting for well known address nodes
  2013-10-24 11:17:57.219/274.760 Oracle coherence GE 3.7.1.0 < WARNING > (thread = Cluster, Member = n/a): delay the formation of a new cluster. waiting for well known address nodes
  2013-10-24 11:17:58.271/275.812 Oracle coherence GE 3.7.1.0 < error > (thread = Cluster, Member = n/a): detected soft timeout) of {WrapperGuardable {Daemon = IpMonitor} Guard Service = ClusterService {name = Cluster, status = (SERVICE_STARTED, STATE_ANNOUNCE), Id = 0, Version = 3.7.1}}
  2013-10-24 11:17:58.273/275.814 Oracle coherence GE 3.7.1.0 < error > (thread = thread of recovery, Member = n/a): Full Thread Dump

  Thread [PacketListener1, 8, Cluster]
  java.net.PlainDatagramSocketImpl.receive0 (Native Method)
  java.net.PlainDatagramSocketImpl.receive (unknown Source)
  java.net.DatagramSocket.receive (unknown Source)
  com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:22)
  com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:1)
  com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:20)
  com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  java.lang.Thread.run (unknown Source)

  Thread [PacketReceiver, 7, Cluster]
  java.lang.Object.wait (Native Method)
  com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
  com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketReceiver.onWait(PacketReceiver.CDB:2)
  com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
  java.lang.Thread.run (unknown Source)

  Thread [attach auditor, 5, System]

  Thread [PacketPublisher, 6, Cluster]
  java.lang.Object.wait (Native Method)
  com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
  com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.onWait(PacketPublisher.CDB:2)
  com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
  java.lang.Thread.run (unknown Source)

  Thread [Cluster |] STATE_ANNOUNCE | [Member (Id = 0, Timestamp is 2013-10-24 11:13:23.762, address = 171.193.103.25:8090, MachineId = 9041, location = site:, machine: FD4C9EF534D5D, process: 17192, role = CoherenceConsole), 5, Cluster]
  sun.nio.ch.WindowsSelectorImpl$ SubSelector.poll0 (Native Method)
  sun.nio.ch.WindowsSelectorImpl$ SubSelector.poll (unknown Source)
  sun.nio.ch.WindowsSelectorImpl$ SubSelector.access$ 400 (unknown Source)
  sun.nio.ch.WindowsSelectorImpl.doSelect (unknown Source)
  sun.nio.ch.SelectorImpl.lockAndDoSelect (unknown Source)
  sun.nio.ch.SelectorImpl.select (unknown Source)
  com.tangosol.coherence.component.net.TcpRing.select(TcpRing.CDB:11)
  com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.onWait(ClusterService.CDB:6)
  com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
  java.lang.Thread.run (unknown Source)

  Thread [reference Manager 10, System]
  java.lang.Object.wait (Native Method)
  java.lang.Object.wait(Object.java:485)
  java.lang.ref.Reference$ ReferenceHandler.run (unknown Source)

  Thread [finalizer, 8, System]
  java.lang.Object.wait (Native Method)
  java.lang.ref.ReferenceQueue.remove (unknown Source)
  java.lang.ref.ReferenceQueue.remove (unknown Source)
  java.lang.ref.Finalizer$ FinalizerThread.run (unknown Source)

  Thread [dispatcher Signal, 9, System]

  Thread [PacketSpeaker, 8, Cluster]
  java.lang.Object.wait (Native Method)
  com.tangosol.coherence.component.util.queue.ConcurrentQueue.waitForEntry(ConcurrentQueue.CDB:16)
  com.tangosol.coherence.component.util.queue.ConcurrentQueue.remove(ConcurrentQueue.CDB:7)
  com.tangosol.coherence.component.util.Queue.remove(Queue.CDB:1)
  com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketSpeaker.onNotify(PacketSpeaker.CDB:21)
  com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  java.lang.Thread.run (unknown Source)

  Thread[logger@1457155060 3.7.1.0,3,main]
  java.lang.Object.wait (Native Method)
  com.tangosol.coherence.component.util.Daemon.onWait(Daemon.CDB:18)
  com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:39)
  java.lang.Thread.run (unknown Source)

  Thread [PacketListener1P, 8, Cluster]
  java.net.PlainDatagramSocketImpl.receive0 (Native Method)
  java.net.PlainDatagramSocketImpl.receive (unknown Source)
  java.net.DatagramSocket.receive (unknown Source)
  com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:22)
  com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:1)
  com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:20)
  com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  java.lang.Thread.run (unknown Source)

  Thread [main, 5, main]
  java.lang.Object.wait (Native Method)
  com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:18)
  com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
  com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:56)
  com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
  com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
  com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
  com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
  com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
  com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
  com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:25)
  com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
  sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  java.lang.reflect.Method.invoke (unknown Source)
  com.tangosol.net.CacheFactory.main(CacheFactory.java:827)

  Thread [recovery Thread, 5, Cluster]
  java.lang.Thread.dumpThreads (Native Method)
  java.lang.Thread.getAllStackTraces (unknown Source)
  com.tangosol.net.GuardSupport.logStackTraces(GuardSupport.java:810)
  com.tangosol.internal.net.cluster.DefaultServiceFailurePolicy.onGuardableRecovery(DefaultServiceFailurePolicy.java:44)
  com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ WrapperGuardable.recover (Grid.CDB:1)
  com.tangosol.net.GuardSupport$ Context$ 1.run(GuardSupport.java:653)
  java.lang.Thread.run (unknown Source)

  2013-10-24 11:17:58.273/275.814 Oracle coherence GE 3.7.1.0 < WARNING > (thread = thread of recovery, Member = n/a): attempt to retrieve custody {Daemon = IpMonitor}
  Exception in thread 'hand' 2013-10-24 11:18:24.025/301.566 Oracle coherence GE 3.7.1.0 < error > (thread = main Member, = n/a): Start cluster error: com.tangosol.net.RequestTimeoutException: timeout during the startup of the service: ServiceInfo (Id = 0, name is Cluster, Type = Cluster
  Set of members = MasterMemberSet)
  ThisMember = null
  OldestMember = null
  ActualMemberSet = MemberSet (Size = 0
  )
  Member ID | ServiceVersion | ServiceJoined | Member State
  RecycleMillis = 1200000
  RecycleSet = MemberSet (Size = 0
  )
  )
  )
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:3)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
  at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:56)
  at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
  at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
  at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
  at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
  at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
  at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
  at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:25)
  at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
  java.lang.reflect.InvocationTargetException

  2013-10-24 11:18:24.025/301.566 Oracle coherence GE 3.7.1.0 < D5 > (thread = Cluster, Member = n/a): Service de Cluster left the cluster at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
  Caused by: com.tangosol.net.RequestTimeoutException: timeout during the startup of the service: ServiceInfo (Id = 0, name is Cluster, Type = Cluster
  Set of members = MasterMemberSet)
  ThisMember = null
  OldestMember = null
  ActualMemberSet = MemberSet (Size = 0
  )
  Member ID | ServiceVersion | ServiceJoined | Member State
  RecycleMillis = 1200000
  RecycleSet = MemberSet (Size = 0
  )
  )
  )
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:3)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
  at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:56)
  at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
  at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
  at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
  at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
  at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
  at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
  at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:25)
  at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
  ... 5 more

  C:\Users\Zk5rjg8 >

  Hi SajeevPynadath

  1

  First start the server process with "cache - server.cmd".

  2

  After that, you can start another process of client or server, the 'coherence.cmd' script is to start a client process to join the cluster.

  3

  So now you have 2 processes, and your cluster.xml will look like this:

  171.193.103.25

  8088

  171.193.103.25

  8089

  4

  Before you begin each remember process java command line:

  for server

  -Dtangosol.coherence.localhost =171.193.103.25 - Dtangosol.coherence.localport = 8088

  for the customer

  -Dtangosol.coherence.localhost =171.193.103.25 - Dtangosol.coherence.localport = 8089

  Kind regards

  Leo_TA