Problems with deployment of network shared on windows PC when installing INSTALLER variables

Hello

I'm using LabVIEW 2014 on Windows 7. I have a project that is developed to be a client GUI (192.168.1.208). The GUI communicates with an application of RT (192.168.1.206) running on LV RT OS and both are connected to a network. The NSV (shared network variables) are housed next to the RT (SVs is on RT/demand side project). This part (communication and everything) works very well.

Now another part is recording data. Why NSV (hosted in the GUI project) are used for strings of communincate (events with the data) to a computer running the registration of data on this PC (192.168.1.208) server. Please note here, currently same PC (192.168.1.208) was used for recording the data server implementation, but later, there may be a new PC that's why NSV is used. I gave this information in case there may be no problem (chances are though).

I created an application (*.exe) and the project GUI installation program. Saving data to the PC (192.168.1.208) if I use one of the options-project/*.exe/installer works supposed. but when I try to install this Setup program on another PC on the network which has no service OR installed gives following error during installation:

Deployment deployment failed shared Variables.lvlib\\192.168.1.109\Shared Variables (error:-1967362042, operating system and Network Services: (Hex 0x8ABC7006) could not start service.).

I have tried almost all the variations in the construction of Installer and .exe for it, but couldn't get rid of this error.

I also want to know how would be a PC not having not OR services/programs installed would host OR shared Variable engine. Although application of the runtime in the application, we give option while building the .exe. But not for the EVS.

I lost several weeks on this issue of emergency assistance would be much appreciated.

Thank you.

If you uncheck the option "selection auto installers" in installer build specification, it should give you the full list of installers, you can include. It's a little weird that it has not detected the requirement of NSV, however.

I think you make you life difficult for yourself by trying to do a few odd handshakes with strings/NSV - NSV is 'tag' data - they are good for the reading of the last value of a variable/signal. If you want to send messages around - stream, network - there is even something like reference e-mail Simple (STM) library - http://www.ni.com/example/27739/en/

Tags: NI Software

Similar Questions

  • Networking & sharing on Windows 7

    I have an office with FP7 (win764bit & 32-bit) & have wired broadband to a single pc. I want to share files & internet on the PC, I have some technical knowledge on configuring IP addresses on pc, but still want to seek advice from the community.kindly guided me step by step follow the steps.

    also please know me what devices are necessary for sharing tastes switches router or another. Sorry for the bad language thaks & I will very much obliged the community if done in my favor

    Hi Citycc,

    Thanks for posting your query in the Microsoft Community Forums.

    I'll be more than happy to help you on the networking & sharing on Windows 7 computers.

    I suggest you to read useful articles and check if it helps.

    Start here to set up a home network in Windows 7

    http://Windows.Microsoft.com/en-in/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

    Homegroup from start to finish

    http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

    Share files with anyone

    http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

    It will be useful.

    Let us know if you encounter problems with Windows in the future. We will be happy to help you.

  • I have a problem with the wireless network card.

    Hello

    I use a laptop Medion MIM 2210 and I have a problem with my wireless network adapter.

    I get a message before Windows 7 starts telling me that there is problem with a wireless driver. The exact message says:

    "Intel UNDI, PXE - Z.0 (build 082)

    Copyright (C) 1997,1998,1999 Intel Corporation

    VIA Rhine II Fast Ethernet Adapter v2.43 (2005/12/15)

    PXE - E61: Media test failure, check cable of

    "PXE - MOF: exit Inel PXE ROM.

    This message appears every time you start and I don't know what he means by "Media Test Failure".

    I turned on my laptop today and noticed I had no internet connection, it showed that it connected but with yellow '!' symbol indicating that it was not fully connected. He did this for a while now and I have reinstalled Windows, in safe mode and I tried to delete the drivers and re - install, but it hangs right on uninstall what makes me angry no the case.

    Of course now, I tried to look for help my internet connection is running but the message is still there. Can someone tell me what to do or how to solve this problem, I am standing now on what to do. I was also on the drivers Medion website but it is impossible to navigate around and drivers without end there'e to choose. I would consider ringing them and asking them if they were not located in Germany as it would cost me a bomb! I did just now searching online via the Device Manager to see if he can find an update for the drivers but nothing came.

    Thanks for any help that anyone can offer :)

    The message is to be cause the BIOS looking for boot from LAN (not wireless) before it starts and then from the hard drive. The Media test failure is because to boot from LAN it tests to see if the wired Ethernet is connected, it is not if it generates the error message.

    Enter the BIOS press F2 after initial power on but before the Logo Windows shows

    Integrated devices should allow you to set the settings of wired network adapter. According to the BIOS it is either "enabled with PXE" or have another option to enable or disable the boot ROM

    In the boot options the LAN card should be removed altogether.

    This message is ONLY applicable to the transfer of the BIOS boot process and should have no impact on the problems of WiFi (it is not on WiFi)

  • Error message indicating the problem with the monitor of devices in Windows XP.

    Original title: Device Monitor

    Error message indicating the problem with the monitor of devices in windows xp. How to fix?

    Hello

    1. when exactly you receive this error message?

    2. What is the brand and model of your computer?

    3. What is the exact error message that you receive?

    Please provide us with more information about the issue so that we can provide you with the necessary assistance.

  • Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

    Would you advice, thank you.

    Hi Hugo,.

    1. what anti-virus software you have installed in the computer?

    2. What is the full error message/code?

    3. the issue occurred after you install Minecraft?

    4. are you able to play Minecraft without any problem?

    5. what happens with Antivirus and Java?

    Windows Update can occur if one or more of the following conditions are met:

    1. the Windows Update database is damaged.

    2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

    3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

    4. a required system file is incorrectly registered.

    5. Windows Installer has encountered an error.

    6. the manifesto of component maintenance (EC) is damaged.

    7. the Windows Update service has stopped during the installation.

    8. a version of the file conflict exists with Windows Update agent files.

    Please follow the steps described in the methods to solve the problem:

    Method 1: We will try the steps from the following link and check the result:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058?WA=wsignin1.0

    Method 2:

    To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

    You can view the following link to download the system update readiness tool and check:

    System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

    http://support.Microsoft.com/kb/947821

    Details of the event log to find what caused the Antivirus and Java to fail:

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Hope that the information provided is useful.

    For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

  • Error message: a problem with your wireless network card

    Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

    Your wireless card has stopped working properly.

    There is a network adapter that allows your computer to connect to a wireless network.

    To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

    problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

    Hi amcop4591,

    1. How is - that Mount you the drive on the computer?

    2 Di you use any third-party tool to mount the drive?

    I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

    If you change the permissions, make changes to the permissions on the drive and then mount the drive.

    Mount or dismount a drive

    http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    * original title - I'm having a problem *.

    You have the latest drivers?
    http://www.nvidia.com/page/support.html

    Aero - Windows 7 - How to troubleshoot problems with Aero

    (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

    (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

    (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

    (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

    If it does not---> click Start---> right click computer---> click Properties

    Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

    Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

  • I have exactly the same problem with the radial program point not to let me install mcafee what should I do?

    I'm having the same exact problem with the point radial program does not let me install mcAfee which can do?

    There is some information about this here: https://community.mcafee.com/thread/19119?start=0&tstart=0

    If this does not help, contact McAfee technical support. They should help you.

  • I have a problem with my shrink to a smaller size text, when I create a link. Can someone help me understand how to solve this problem?

    I have a problem with my shrink to a smaller size text, when I create a link. Can someone help me understand how to solve this problem? Here is the URL of the page where it happens. Spring Art tour

    Tamlyn

    Line 22 of your main document

    do-size: 14px;

    change that to

    font size: 1 rem;

    See https://css-tricks.com/confused-rem-em/

  • I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they

    I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they add the js include. They recommend at this time that I use another program like Wordpress, but I won't do that, because a large part of the site is designed and just add the markets. Here is the link to the site. At this point, the home page is the question. I can also provide a screen shot of how markets are supposed to look like

    This part does not seem too difficult.

    I bet they are now trying to "knit" their share of data right in your Muse- generated page, and they tell you that your code is terrible (and their smells like daisies). The usual clash...

    But it might be easier for you (and many others) if they offer their content as a separate page of small, so you can incorporate it as an iframe tag in an HTML object in Muse. No matter what code for permission to host the iframe, could be inserted as a simple script in Panel of Options of Page of Muse.

  • Resettlement CS5 troubleshooting my PC had problems, so I had to upgrade to windows 8.  during installation, I received a response that my serial number was not valid.  It's the same serial number that I received from my initial order.  I disabled before

    Resettlement CS5 troubleshooting my PC had problems, so I had to upgrade to windows 8.  during installation, I received a response that my serial number was not valid.  It's the same serial number that I received from my initial order.  I disabled before the upgrade to windows 8

    Contact by web chat support.

    Mylenium

  • Uninstalled Windows 8 when installing ubuntu 13.10

    Original title: LOST WINDOWS! Help

    I accidentally lost windows 8 when installing dual-boot ubuntu 13.10... is it possible to recover the product key?

    Hi raminnajeeb, I see that this is your first post here. Welcome to our community!

    If your PC comes with Windows 8, then you have no product key.  The key is automatically acquired the system when you install Windows 8 (the key is integrated).

    If you have purchased Windows 8 online or in a store, then you need to check your mail received purchase or the original product packaging to get the key.

  • Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

    I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

    Hello

    Method 1:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    You can also view the related items for more information.
    The problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    Method 3:

    Setting up a wireless network

    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

    Wireless network card: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

    See also:

    Connect to a network with Windows Vista wireless

    http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

  • Problems with the home network Vista-Windows 98 SE

    The material is properly plugged computer Vista 98-router-computer by ethernet.
    Group is correct on both computers (working group)
    Computer with Windows 98 Second edition can see Vista computer and network neighbourComputer with Windows 98Se can see Vista disk and shared folders and can create network drive
    It cannot access the file and read dirctory in folders shared of Vista. Wait and sometimes crash (happens with this machine before). In addition, it is very slow.
    Vista computer properly manage files, shared files on the Windows 98Se computer, it can load programs, but it is a stupid machine and she don't properly map the network (detail).
    If you can help, thanks. Answers in french are also welcome.
    Kind regards

    LaurenJF, we do not support setting up file sharing between Windows Vista and a version of Windows prior to XP.
    Thank you for visiting the Microsoft Vista answers community. Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for