CME and DNs without assigned to ephone
Hello!
Is it possible to configure a dn with all the features without assigning an ephone? In the past, I recognized, that if there is an ephone-dn configured and unassigned, certain featues like bell forward or the night-service call does not work!
Any ideas?
Thank you
Concerning
What features do you expect? Some cannot be done without a phone. Call-before all work, and it is usually necessary.
Tags: Cisco Support
Similar Questions
-
Time Capsule has lost the Internet connection and DNS servers
I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.
I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.
It may or may not be important to mention the following:
1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.
2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:
I would be grateful for any advice.
Weird how everything's going well for a few years and then crazy when you have something will change.
El Capo adds some network problems more... but something could be fundamentally wrong with the installer.
Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.
You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!
1. I need to know what modem you are connected. Make and model please?
2. the most important. What is the main router on your network or a modem?
I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.
https://discussions.Apple.com/thread/6509420
It is not so difficult... You just know where you're going before you start.
Airtport Utility cannot find airport Time Capsule on one of my Macs 2009
-
on AD and DNS requirement in vCenter server installation
Hello, I am facing installation stuffs now. It's about installation vCenter server 5.5 under windows.
I'm just in my lab. He went well when I installed vCenter server device and I can do the remaining animals vSphere.
But this time I must try to use vCenter in windows. I'm stuck in the 'server URL search"in installing vCenter.
Is it OK to install the vCenter without AD and DNS server as I do now. If this isn't the case, pls guide me.
You must at least COMPLETE your vCenter server field cannot be resolved and if you do not have DNS server in your lab, try to configure the host files... and on the announcement, if you do not have Active Directory domain or the vCenter Server belongs to a workgroup, not all features are available.
To see a list of the software requirements and best practices for installing vCenter Server, check this KB: article: installation vCenter Server 5.5 recommended (2052334)
-
Recent update asking for permission to put on my camera and audio without my knowledge, what then? Does this mean that Big Brother or anyone who can turn my Audio/video and see what I do?
Firefox will always ask permission each time before the video/audio recording is turned on - then only you can activate it.
the authorization is used for technologies such as webrtc: https://blog.mozilla.org/blog/2013/09/17/webrtc-now-available-across-mobile-and-desktop-with-new-firefox-for-android-compatibility/
-
Unresponsive. Updated and rebooted without success. Can't seem to 'options' due to no response. Always 'it's embarrassing... "but to restore or close button ends up making inadmissible browser. Closed with Taché also. Can't get into safe mode.
BP-20b2f065-d592-4b67-8020-7714a2130305Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:
Note: You can print these steps or consult them in another browser.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- Windows:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Windows:
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
Please report back to see if this helped you!
-
My iphone is disabled. I can't connect to itunes and icloud without my password. It is not possible to do so while the phone is off. What should I do?
The steps here talk about everything that you can do other than take it to an Apple store with proof of purchase.
-
A pencil of Apple can be used with two iPad Pros - a big and small - without having to plug into each iPad before each use? The same pencil, Apple will be able to come and go between two iPad Pros?
You can use a pencil of Apple with more than one iPad Pro, but you still need to plug pair to use with each device, serparately.
-
I get reimage opening new windows in safari instead of the links I clicked. I tried the force of suggestion smoking etc and uninstall without success. It seems very little help on this in the normal search engines. Any ideas?
On the one hand, you cannot uninstall Safari. It comes as part of the operating system. So, I don't know what you've done or what you think you did, but this is not that. Could you explain more by what you mean with "I get reimage opening in a new window? You can post a screenshot of what happens?
-
I can't open attachments ._DOC. I tried combining write, wordpad and others without success. I refused access to iexpl because of security settings. I have no WORD from the Office of M. advice?
You must change the extension of the name of _DOC in just DOC. Then you will need a program to open the file; the free Word Viewer, as well as a compatibility pack, if needed, should do the job. How to obtain the latest Word Viewer
-
I'm using Windows 2003 standard Server SP 2 found problem svchost.exe run service Client DHCP [DHCP] and DNS Client [DNScache]
use a lot around 2 GB of memory. Virus scan try and Hijackthis is not found. I try to restart memory return service.I have 4 servers and the same symptoms.
Anyone know why it caused?
Hello
Your Windows 7 is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.http://social.technet.Microsoft.com/forums/en/category/WindowsServer
-
Windows 7 - tried several times to install updates KB2160841 and KB24344419 without success
??? RSVP
* original title - have tried several times to install updates KB2160841 and KB24344419 without success. What should do? also the experience of "Corrupted recycle bin__' warnings? *
HowManage ,Configure and troubleshoot Windows updates
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?
This happened after the execution of virus / malware scans and found some. The supposedly fixed it, but now I can't access the internet. It still works on my local network.
Hello
You did changes to the computer before the show?
Please follow the steps below.
Method 1:
Follow the steps from the link below.
Method 2:
Follow the steps from the link below
-
Can I uninstall Windows XP and reinstall without losing data?
I managed to destroy my XP installation so bad that I can't retrieve it using the original installation CD. can I uninstall and reinstall without losing all my backup files? Thanks for any help or advice
Hi abbyhunt,
-
Unable to access e-mail and attachments without being redirected.
Unable to access e-mail and attachments without being redirected.
Hello
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.
-
How can I store several sentences and insert without typing?
How can I store several sentences and insert without typing?
Maybe you are looking for
-
can you save the selected area with hp smart printing to a file? If so, how?
-
Server I/O from the VISA against library MODBUS communication approaches
I read several white papers OR on the various ways to interface with instruments of communication using MODBUS. On the surface it seems to me that the I/O Server is the fast and easy way to put up just to get something. Once I found this so I'll have
-
Disable the LAN Auto setting troubleshooting
How to disable the automatic connection on my local network?
-
Re-installation of free cell How to re - install or download the free cell game came with my computer. I have a HP Media Center under Windows XP. The game of free cells that came install has been uninstalled. Need help. Thank you.
-
Is there a place that sets the permissions in Dreamweaver cs5.5? I am able to download images, but not the html files.