CMR Cisco and Webex cloud solution

Similar Questions

• TMS and WebEx One-Touch

  The telepresence Management Suite does support WebEx One Touch?

  If so

  What would be the best to use for integrating Cisco Telepresence and WebEx, if you BE6K with CUCM and VCS controlling the C-Series, Cisco TMS or Cisco TM ends?

  I look forward to your helpful responses.

  Hello

  I think that your first question is answered in this thread: https://supportforums.cisco.com/message/3880606#3880606

  / Magnus

  Sent by Cisco Support technique iPhone App

• If I choose the Adobe Creative complete Cloud solution...

  If I choose the Adobe Creative complete Cloud solution, can I install it on my two computers? My iMac a d my MacBookPro?

  You can install and activate applications desktop creative cloud on two computers, regardless of the operating system.

• Communication between HP eprint and Google Cloud Print

  Hello

  communication between HP eprint and Google Cloud Print seems to be broken. At least for me.

  Documents to print when I print vio Chrome browser or Cloud Print dashboard - but the State in the clouds print remains "submitted". It seems that somehow the HP eprint status doen't get referred to cloud print. In HP eprintcenter paper says "printed".

  Well, I wonder who will take care of this problem...  (Hope this does not lead to fingerpointing only...)

  Thanks for your support!

  Best,

  George

  Started more work, a few weeks ago. All is well now. Don't know who that sets well.

• Cisco and Checkpoint VPN clients on a single PC

  Hello

  I'm in the following fix:

  I had used customer Checkpoint SecuRemote 4.1 SP - 5 VPN in the past.

  Now, I have installed the Cisco VPN client version 4.0.4 on my PC to access IPSec VPN for the PIX in our headquarters.

  According to Cisco VPN release notes http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/rel404/404clnt.htm#wp1346340 , it should be possible to have clients both Cisco and Checkpoint VPN installed on the same machine.

  But I am not able to connect to my PIX, I receive the following error message:

  "Secure the complete VPN connection locally by the Client.

  Reason 403: failed to contact the security gateway. »

  When I'm looking for signs of PC control-> system-> hardware-> device Administration-> network cards, I can see Cisco Systems VPN Adapter disabled.

  After you activate manually, I always get the same error when you try to connect to the Cisco VPN client.

  After PC restart the Cisco VPN adapter is disabled later.

  I tried to uncheck Check Point SecuRemote form my Dial-up connection (bypassing CSCea31192 of bug, but the bug does not affect NAT - T connection which I use).

  I noticed the same situation on three different computers, one running Windows XP, both running Windows 2000.

  After uninstalling the client Checkpoint completely (including Windows registry manual removal), the Cisco VPN client works very well.

  It seems to me, therefore, that there is a profound mismatch between Cisco and Checkpoint VPN clients.

  Does anyone know of a workaround?

  Thank you

  Milan

  We had the same problem with some of our users who need to use the two clients to connect to customer sites.

  If I remember the cisco client does not start automatically, but the client of checkpoint 4.1 don't.

  We by-passed by deleting the registry entry point control that starts the client at startup. fwenc.exe is the entrance and it is in

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  After that make a shortcut to the executable file that is stored in the directory \bin to relevant checkpoint on the client (it is different from NT & 9 client x) and then only start when it is necessary.

  Hope that's a help

• Problem router Cisco and Checkpoint VPN

  Hello

  I couldn't establish vp from site to site between cisco and checkpoint. Can you please check the logs?

  Thank you.

  * 29 sept 08:17:22.627: IPSEC (sa_request):,.
  (Eng. msg key.) Local OUTGOING = Y.Y.Y.Y:500, distance = X.X.X.X:500,
  local_proxy = 192.168.222.0/255.255.255.0/256/0,
  remote_proxy = 10.0.10.0/255.255.255.0/256/0,
  Protocol = ESP, transform = esp - aes 256 esp-sha-hmac (Tunnel),
  lifedur = 3600 s and KB 4608000,
  SPI = 0 x 0 (0), id_conn = 0, keysize = 256, flags = 0 x 0
  * 29 sep 08:17:22.631: ISAKMP: (0): profile of THE request is (NULL)
  * 29 sep 08:17:22.631: ISAKMP: created a struct peer X.X.X.X, peer port 500
  * 29 sep 08:17:22.631: ISAKMP: new created position = 0x88AD1AB0 peer_handle = 0 x 80000004
  * 29 sep 08:17:22.631: ISAKMP: lock struct 0x88AD1AB0, refcount 1 to peer isakmp_initiator
  * 29 sep 08:17:22.631: ISAKMP: 500 local port, remote port 500
  * 29 sep 08:17:22.631: ISAKMP: set new node 0 to QM_IDLE
  * 29 sep 08:17:22.631: ISAKMP: (0): insert his with his 88AF7D94 = success
  * 29 sep 08:17:22.631: ISAKMP: (0): cannot start aggressive mode, try the main mode.
  * 29 sep 08:17:22.631: ISAKMP: (0): pre-shared key found peer corresponding X.X.X.X
  * 29 sep 08:17:22.631: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
  * 29 sep 08:17:22.631: ISAKMP: (0): built the seller-07 ID NAT - t
  * 29 sep 08:17:22.631: ISAKMP: (0): built of NAT - T of the seller-03 IDexit
  Router (config) #n
  * 29 sep 08:17:22.631: ISAKMP: (0): built the seller-02 ID NAT - t
  * 08:17:22.631 Sept. 29: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
  * 08:17:22.631 Sept. 29: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM1

  * 29 sep 08:17:22.631: ISAKMP: (0): Beginner Main Mode Exchange
  * 29 sep 08:17:22.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:17:22.631 Sept. 29: ISAKMP: (0): a Packet.o IKE IPv4 send

  * 29 sep 08:17:32.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:17:32.631: ISAKMP (0): increment the count of errors on his, try 1 5: retransmit the phase 1
  * 29 sep 08:17:32.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
  * 29 sep 08:17:32.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:17:32.631 Sept. 29: ISAKMP: (0): sending of a CPVPN IKE IPvaccess lists

  * 29 sep 08:17:42.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:17:42.631: ISAKMP (0): increment the count of errors on his, try 2 of 5: retransmit the phase 1
  * 29 sep 08:17:42.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
  * 29 sep 08:17:42.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:17:42.631 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE...
  * 29 sep 08:17:52.627: IPSEC (key_engine): request timer shot: count = 1,.
  local (identity) = Y.Y.Y.Y:0, distance = X.X.X.X:0,
  local_proxy = 192.168.222.0/255.255.255.0/256/0,
  remote_proxy = 10.0.10.0/255.255.255.0/256/0
  * 29 sept 08:17:52.627: IPSEC (sa_request):,.
  (Eng. msg key.) Local OUTGOING = Y.Y.Y.Y:500, distance = X.X.X.X:500,
  local_proxy = 192.168.222.0/255.255.255.0/256/0,
  remote_proxy = 10.0.10.0/255.255.255.0/256/0,
  Protocol = ESP, transform = esp - aes 256 esp-sha-hmac (Tunnel),
  lifedur = 3600 s and KB 4608000,
  SPI = 0 x 0 (0), id_conn = 0, keysize = 256, flags = 0 x 0
  * 29 sep 08:17:52.627: ISAKMP: set new node 0 to QM_IDLE
  * 29 sep 08:17:52.627: ISAKMP: (0): SA is still budding. Attached new request ipsec. (local Y.Y.Y.Y, distance X.X.X.X)
  * 29 sep 08:17:52.627: ISAKMP: error during the processing of HIS application: failed to initialize SA
  * 29 sep 08:17:52.627: ISAKMP: error while processing message KMI 0, error 2.
  * 29 sep 08:17:52.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:17:52.631: ISAKMP (0): increment the count of errors on his, try 3 of 5: retransmit the phase 1
  * 29 sep 08:17:52.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
  * 29 sep 08:17:52.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:17:52.631 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
  * 29 sep 08:18:02.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:18:02.631: ISAKMP (0): increment the count of errors on his, try 4 out 5: retransmit the phase 1
  * 29 sep 08:18:02.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
  * 29 sep 08:18:02.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:18:02.631 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
  * 29 sep 08:18:12.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:18:12.631: ISAKMP (0): increment the count of errors on his, try 5 of 5: retransmit the phase 1
  * 29 sep 08:18:12.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
  * 29 sep 08:18:12.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:18:12.631 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
  * 29 sep 08:18:22.627: IPSEC (key_engine): request timer shot: count = 2,.
  local (identity) = Y.Y.Y.Y:0, distance = X.X.X.X:0,
  local_proxy = 192.168.222.0/255.255.255.0/256/0,
  remote_proxy = 10.0.10.0/255.255.255.0/256/0
  * 29 sep 08:18:22.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:18:22.631: ISAKMP: (0): the peer is not paranoid KeepAlive.

  * 29 sep 08:18:22.631: ISAKMP: (0): removal of reason ITS status of 'Death by retransmission P1' (I) MM_NO_STATE (peer X.X.X.X)
  * 29 sep 08:18:22.631: ISAKMP: (0): removal of reason ITS status of 'Death by retransmission P1' (I) MM_NO_STATE (peer X.X.X.X)
  * 29 sep 08:18:22.631: ISAKMP: Unlocking counterpart struct 0x88AD1AB0 for isadb_mark_sa_deleted(), count 0
  * 29 sep 08:18:22.631: ISAKMP: delete peer node by peer_reap for X.X.X.X: 88AD1AB0
  * 29 sep 08:18:22.631: ISAKMP: (0): node-930113685 error suppression FALSE reason 'IKE deleted.
  * 29 sep 08:18:22.631: ISAKMP: (0): error suppression node 661004686 FALSE reason 'IKE deleted.
  * 08:18:22.631 Sept. 29: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
  * 08:18:22.631 Sept. 29: ISAKMP: (0): former State = new State IKE_I_MM1 = IKE_DEST_SA

  * 29 sep 08:18:22.631: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
  * 29 sept 08:18:27.559: IPSEC (sa_request):,.
  (Eng. msg key.) Local OUTGOING = Y.Y.Y.Y:500, distance = X.X.X.X:500,
  local_proxy = 192.168.222.0/255.255.255.0/256/0,
  remote_proxy = 10.0.10.0/255.255.255.0/256/0,
  Protocol = ESP, transform = esp - aes 256 esp-sha-hmac (Tunnel),
  lifedur = 3600 s and KB 4608000,
  SPI = 0 x 0 (0), id_conn = 0, keysize = 256, flags = 0 x 0
  * 29 sep 08:18:27.559: ISAKMP: (0): profile of THE request is (NULL)
  * 29 sep 08:18:27.559: ISAKMP: created a struct peer X.X.X.X, peer port 500
  * 29 sep 08:18:27.559: ISAKMP: new created position = 0x85EDF1F0 peer_handle = 0 x 80000005
  * 29 sep 08:18:27.559: ISAKMP: lock struct 0x85EDF1F0, refcount 1 to peer isakmp_initiator
  * 29 sep 08:18:27.559: ISAKMP: 500 local port, remote port 500
  * 29 sep 08:18:27.559: ISAKMP: set new node 0 to QM_IDLE
  * 29 sep 08:18:27.559: ISAKMP: find a dup her to the tree during the isadb_insert his 88C1CE60 = call BVA
  * 29 sep 08:18:27.559: ISAKMP: (0): cannot start aggressive mode, try the main mode.
  * 29 sep 08:18:27.559: ISAKMP: (0): pre-shared key found peer corresponding X.X.X.X
  * 29 sep 08:18:27.559: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
  * 29 sep 08:18:27.559: ISAKMP: (0): built the seller-07 ID NAT - t
  * 29 sep 08:18:27.559: ISAKMP: (0): built of NAT - T of the seller-03 ID
  * 29 sep 08:18:27.559: ISAKMP: (0): built the seller-02 ID NAT - t
  * 08:18:27.559 Sept. 29: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
  * 08:18:27.559 Sept. 29: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM1

  * 29 sep 08:18:27.559: ISAKMP: (0): Beginner Main Mode Exchange
  * 29 sep 08:18:27.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:18:27.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
  * 29 sep 08:18:37.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:18:37.559: ISAKMP (0): increment the count of errors on his, try 1 5: retransmit the phase 1
  * 29 sep 08:18:37.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE
  * 29 sep 08:18:37.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:18:37.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
  * 29 sep 08:18:47.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:18:47.559: ISAKMP (0): increment the count of errors on his, try 2 of 5: retransmit the phase 1
  * 29 sep 08:18:47.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE
  * 29 sep 08:18:47.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:18:47.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.

  * 29 sep 08:18:57.559: IPSEC (key_engine): request timer shot: count = 1,.
  local (identity) = Y.Y.Y.Y:0, distance = X.X.X.X:0,
  local_proxy = 192.168.222.0/255.255.255.0/256/0,
  remote_proxy = 10.0.10.0/255.255.255.0/256/0
  * 29 sept 08:18:57.559: IPSEC (sa_request):,.
  (Eng. msg key.) Local OUTGOING = Y.Y.Y.Y:500, distance = X.X.X.X:500,
  local_proxy = 192.168.222.0/255.255.255.0/256/0,
  remote_proxy = 10.0.10.0/255.255.255.0/256/0,
  Protocol = ESP, transform = esp - aes 256 esp-sha-hmac (Tunnel),
  lifedur = 3600 s and KB 4608000,
  SPI = 0 x 0 (0), id_conn = 0, keysize = 256, flags = 0 x 0
  * 29 sep 08:18:57.559: ISAKMP: set new node 0 to QM_IDLE
  * 29 sep 08:18:57.559: ISAKMP: (0): SA is still budding. Attached new request ipsec. (local Y.Y.Y.Y, distance X.X.X.X)
  * 29 sep 08:18:57.559: ISAKMP: error during the processing of HIS application: failed to initialize SA
  * 29 sep 08:18:57.559: ISAKMP: error while processing message KMI 0, error 2.
  * 29 sep 08:18:57.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:18:57.559: ISAKMP (0): increment the count of errors on his, try 3 of 5: retransmit the phase 1
  * 29 sep 08:18:57.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE
  * 29 sep 08:18:57.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  Router #.
  Router #.
  * 08:18:57.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
  * 29 sep 08:19:07.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
  * 29 sep 08:19:07.559: ISAKMP (0): increment the count of errors on his, try 4 out 5: retransmit the phase 1
  * 29 sep 08:19:07.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE
  * 29 sep 08:19:07.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
  * 08:19:07.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
  Router #.
  Router #un all
  All possible debugging has been disabled

  The log shows main mode setup has failed.  See if this helps: http://www.itcertnotes.com/2011/04/ipsec-stuck-in-mmsasetup-and-mmnostat...

• Client VPN Cisco and Cisco Secure

  Cisco VPN client and the VPN from Cisco Secure client free to use with pix firewall software?

  Thank you.

  Hello

  If you have a valid contract to Cisco and you can get the following link:

  http://www.Cisco.com/Kobayashi/SW-Center/SW-VPN.shtml

  with your CCO login, then you should be able to use these customers at no cost because they are already covered by the contract.

  Thank you and best regards,

  Abdelouahed

  -=-=-

• Printer HP C310 and Google Cloud Print problems

  I use a Chromebook with a printer C310 and Google Cloud Print. The print dialog does not multiple copies. Additinally, the print dialog box provides to specify which pages in a given document to print, but still don't know, all pages printed on a documebnt.  HP can fix this problem or is it a problem of Google Cloud Print?

  Unfortunately, you use the Chromebook and the dialog box does not allow for multiple impressions, then this is probably a feature that has not been put in the Chromebook yet. I would suggest contacting their support, like printing for our printer software can only digest the orders it is given - if the command is not there for multiple copies then the printer will have any choice but to print them one at a time.

  I hope this helps!

• I need help I get error 6 installation program and creative cloud 1 error.

  I need help I get error 6 installation program and creative cloud 1 error.

  Code 1 https://forums.adobe.com/thread/1434528

  6 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html code

• Hi, I have bought LR6 and installed cloud creative ok, but when you go to installation of Lr, it allows only one installation of the trial version, the other options are to buy. I expect that when I pay 129 euros for the LR I can install it easily and not

  I bought LR6 and installed cloud creative ok, but when you go to installation of Lr, it allows only one installation of the trial version, the other options are to buy.

  Serialize Lightroom trial to activate like Lightroom 6 CC

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• I can't install my products which is an Illustrator and creative clouds. I paid. Why?

  Hello

  I can't install my products which is an Illustrator and creative clouds. I paid. Why? I was just able to install Photoshop and InDesign.

  Hello

  Please help us to better understand.

  What message do you get when installing apps?

  You can also check:

  Error "Unable to install" received when installing Adobe Creative Cloud desktop application

  Troubleshoot Adobe Creative cloud download, install and update questions

  Hope this helps!

• The person who introduced the Adobe Stock and Adobe Cloud composition to our business has left the company. I tried to change the admin myself, June Simonton and let myself do. What I'm doing.  The previous person's e-mail is tkea

  What should I do when the person who introduced the Adobe Stock and Adobe Cloud composition to our business has left the company? I tried to change the admin myself, June Simonton and let myself do.  Email of the previous person is < deleted by the moderator >

  Go to Adobe Creative Cloud

  Hello

  Please see creative cloud for teams FAQ: How can I manage my account teams?

  Hope that helps!

  Kind regards

  Sheena

• Hello, I need help.  in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Hello, I need help. in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Policies automatically goes to "off" If you have your screen as working RGB profile - what is something that you should never do. Always have a standard space like RGB work.

  And Yes, "preserve embedded profiles" is the only sensitive parameter. Others are best for special purposes where you really know what you are doing - at worst they will transform your archive in a unrecoverable mess.

  

• I bought indesign yesterday but I can't download it. It gives me the opportunity to trial and the cloud is loading but does not

  I bought indesign yesterday but I can't download it. It gives me the opportunity to trial and the cloud is loading but does not

  Hello

  You can also visit the links below for help:

  For the trial:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  For cloud creative loading (spinning wheel):

  Does not open App | Wheels of progress turn continuously

• Hi, I have a subscription in photoshop and creative cloud which includes the luminous room. but he asks me a serial number now; can anyone help please?

  Hi, I have a subscription in photoshop and creative cloud which includes the luminous room. but he asks me a serial number now; can anyone help please?

  Help creating cloud / Cloud Creative applications request serial number

  https://helpx.Adobe.com/creative-cloud/KB/CCM-prompt-serial-number.html