TMS and WebEx One-Touch

Similar Questions

• I have just updated an Alcatel one touch fire to version 1.3 (firefox OS) and the market no longer charge

  I have just updated an Alcatel one touch fire to version 1.3 (firefox OS). Rigth after installation completed and restart, the market App has not loaded at all. He showed only a blank page and the exit button (x) that have nothing. I also tried to access market from the pre-installed browser (firefox), but the result was the same.
  E-mail has failed also. A message that a secure connection to the server imap.googlemail.com was not possible and that the certificate is not valid, appeared (something like that because it's in Greek). How can I fix these problems? If not, how I can return to the previous version (1.2) rll?

  Hello, can you check that your clock system, the date and time are always well positioned?

• How to use Maxtor One Touch II and Retrospect Express

  I have Maxtor One Touch II and Retrospect Express 9.0.2.102. I guess the 2 go hand in hand, but don't know how to start.  I am backing up my files Mac 10.6.8.

  Hello

  You should check with Maxtor, Retrospect Express and Mac support.

  Maxtor is now Seagate - Support
  http://www.Seagate.com/support/

  Retrospective - Support
  http://www.Retrospect.com/en/support

  Apple - Mac - Support
  http://www.Apple.com/support/Mac/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm trying to interconnect a XP home and a XP Pro with a Firewire 1394 through a Maxtor One Touch 4 Plus HARD drive cable to share the HARD drive and also run a home network.

  Is it possible for me to take the files of XP Home that has installed 1394 controller and use the 4 files that I found marked 1394 in I386 to form the controller on my XP Pro, more driver 1394 in \WINDOWS\System32\DRIVERS to close the loop and enable the ethernet connection both 1394 on both computers to have two computers connected to the Maxtor One Touch 4 Plus as well as HARD drive the network. I was hoping maybe even replace the ethernet cable and use the connection 1394 through the Maxtor which has several types of connectors on it.  Again, I am trying to install a controller 1394 on a computer that has no 1394, than USB 2.0. so that the XP Pro machine will recognize the 1394 card with my home XP firewire cable to the Maxtor HDD which it is already connected to the XP Pro via USB 2.0? I have you confused yet?

  I found a post of S.W. video dated the 05/01/11, which has been handled by Gokul T and treated with the Firewire cable and video on a newer operating system, so I thought I would test Gokul T or someone else to resolve this situation. I couldn't find a controller IEEE 1394 I could just download and install on my XP Pro machine. These are the two Dell, is an inspiron 5100 with installed 1394 with taking and the GX280 is one without the 1394 controller installed, or the socket.

  You will need a firewire to XP Pro card. The drivers are already on the hard drive. Once the card is installed, you will see the icon of the network for this adapter. So you can use it.

  The reason why there is no 1394 net adapter on XP Pro is now, because there is no firewire card

• Maxtor external USB One Touch Mini III and HP Pavilion dv5000 series with Windows 7 Ultimate

  Hello

  I use Windows 7 Ultimate SP1 and I have HP Pavilion dv5191ea LT. I tried to connect an external Maxtor USB One Touch mini III hard drive and he would not recognize the disc. It's boring. I tried my best to find a solution, but I'm still without a clue. Anyone here who can help me? I would like help or the online guide that anyone of you can offer. Thanks in advance to anyone who can help.

  Danny

  No XP is not installed, but it was installed before W7. Anyway, I solved the problem. The asnwer is that all Maxtor mini III One touch external USB key comes with software that allows you to encrypt disks require a password to open the disc. If the password is enabled when you close the last time, then this will bypass the detection of the drive in disk management. You open the disc in an XP environment and hell security as it does not work in W7. After you do this, the disk is available in W7. This site has been a great help:

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=211851&NewLang=en

  Please help in this ad, while others may help.

• Alcatel one touch fire will not be updated.

  It's June 9, 2014 and my alcatel one touch fire works always firefox OS v1.1. Whenever I check updates, the phone said I use the latest version of something that is obviously not true. I can't understand why it will not be updated. Any help would be appreciated.

  Hello Ralph Daub.

  Thank you for the information provided. They have certainly helped me to better understand the situation.

  I realize that Firefox OS starts a mobile OS compared to its competitors and it will run in a few hiccups.

  But anyway, I'll be patient until v1.3 gets properly evaluated and rolled on my device.
  Thank you for your support.

  -randomffuser

• alcalel one-touch 5005 X driver free download

  My pc don't see my alcatel5005x one touch on USB mobitel. How to get a driver

  Hello

  You get a driver for the phone from the phone manufacturer.

  Contact the manufacturer:

  http://en.Wikipedia.org/wiki/Alcatel_Mobile_Phones

  Alcatel Mobile Phones are a brand of mobile phones. It was created in 2004 in a joint venture between Alcatel-Lucent France and TCL Communication of China.

  TCT Mobile Limited (former name: T & A mobile phones Limited) is a member of the TCL Communication listed on the Hong Kong Stock Exchange (HKSE: 2618) which was created in August 2004 by TCL Communication and Alcatel. ^[1]

  TCT Mobile Limited manages three business units: ALCATEL Mobile Phones, mobile phones, TCL and Brand Design Lab

  See you soon.

• Driver for Maxtor One Touch III

  I use a desktop computer IQ528d HP touchsmart running on a 64-bit processor. I tried to get my Maxtor One Touch III work but my computer couldn't detect it. Message is cannot find the driver. I went into pilot Web site Maxtor and download OTC_EMC_Vista_Update [1], but my computer still couldn't work. Is the problem due to the fact that the driver will not work on a 32-bit computer? Otherwise, that's the right driver to use? Where to find it?

  Hi roger low,.

  Please use the Forum for answers.

  I have studied the issue and found that Maxtor One Touch III is perhaps not compatible with the 64-bit version of Vista.
  If you have contacted the OEM, and they can provide you with a driver, it may not work.

  Let us know how it works. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Maxtor One Touch 4 external hard drive not recognized by Windows 7 64 bit

  It does not appear in Device Manager, and disk management.

  I tried all 8 USB ports on my computer.

  I have it plugged into different outlets (light still on) and tested it on other computers running Vista 32 bit and XP.

  The drive works fine on other computers, but not my new computer running Windows 7 64 bit.   Microsoft Compatibility Checker stated that this player should work with Windows 7 64 bit.

  I'd like to get this to work by car.  Any ideas?

  Hi Anthony Netties.

  Check if the hard drive is detected in the BIOS.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  While I was looking at the Seagate site, I came across this One Touch 4 is only designed to work with 32-bit operating systems only and is perhaps the reason for computer detects it not.

  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=OT4-downloads&vgnextoid=0ed72c9e46914110VgnVCM100000f5ee0a0aRCRD

  You can also run the sea tools available in the link below and check.

  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CMR Cisco and Webex cloud solution

  Hello

  I hope this is the right place to ask the questions about CMR cloud services and webex... If my current company is looking for room conference based cloud solution. WebEx is superb and I tested with the test account. I'm waiting for the trial of CMR license which, according to the guidelines of the page Web will take up to a week. I'm still confused between Webex and CMR. Are they basically the same?

  Anyway, now my main question (not the one above) is that we also have a Cisco Telepresence C40 and a few cameras. We have them picked up by another agency recently closed. Can we use with the service cloud CMR or webex? Is there another device required for use with the cloud?

  Thank you

  Difan

  Cloud of CMR is characteristic of WebEx Meeting Center and makes it possible to endpoints of video and applications to join the WebEx meeting.  So yes, it is possible with cloud of CMR for your C40 to participate in a Meeting Center meeting.

  Videoconferencing Cisco WebEx Meeting Center data sheet

• One touch MAXTOR 4.

  Hello

  I have a MAXTOR one touch 4.
  It worked perfectly under VISTA then under W7.
  But for some time he changed letter E: / happened to I: / and when I try to open it, windows sends me: "I:\ is not accessible - access denied" thank you for your lights
  CRDT

  Hello

  You asked your question in the text of the Microsoft Community. Please you would click on the 'Change Region' button down to the left of the screen and select your preferred language. Now ask you question once again.

  Thank you.

  Translation of Bing above:

   

  Hello

  You have asked your question in the English version of the Microsoft Community. Please, you would click on the 'Change Region' button down to the left of the screen and then to your preferred language. Now ask you question again.

  Thank you.

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• How to disable iCloud on iTunes and my iPod Touch

  I have a serious frustration with iCloud and my iPod Touch (latest generation).   I have purchased music from iTunes and download on my IPod with no problem.    The problem arises when I play the iPod to my bluetooth speaker.   The music will not play unless I have Wi Fi.  This has never happened before, and it seems to be associated with the songs that have the symbol of iCloud.   Is this true?  Subsequently, I have the WiFi?    I use my speaker for iPod/blue tooth when I'm on my bike.   Last year I logged on my bike nearly 1500 miles of road.  I desperately need my songs.

  When you see a track with the iCloud on this symbol, it means that the track has NOT been downloaded on your device. That's why you need Wi - Fi to listen to.

  You can download the tracks you want when you're connected, or you can activate iCloud music library iTunes is in the settings and preferences.

• can I change my old trackpad and replace Force touch trackpad on my macbook pro... it's going to work?

  can I change my old trackpad and replace Force touch trackpad on my macbook pro... it's going to work?

  N ° any other hardware and firmware.

• I made a backup of my 4s in the cloud that I want to restore on my new 5, how do I do this and do one on one of my old phone?

  I made a backup of my 4s in the cloud that I want to restore on my new 5, how do I do this and do one on one of my old phone?

  Hi TA152

  Turn on the phone and go through the set up process. When you are prompted, select restore backup:

  

  If you already set up as a new device, you will need to reset and start over:
  Settings > general > reset > erase all content and settings