COA in recovery discs?

Similar Questions

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Compaq presario owner, who lost recovery discs

  Hi, a friend who bought a new v2000 Compaq Presario back in 2005/6 should reinstall its OS XP home.  He has no recollection of any recovery disks and there is no partition recovery using F don't numbers ect.  I said maybe we could buy a new copy of XP home on ebay however, the number of sticker COSTS on the back of his laptop computer also appears in the BIOS, before spend us money on a drive someone can confirm that it will work on the assumption that the seller provides us with a COA sticker and license number?

  We tried HP/Compaq and they use now a third party (best2serve?) to solve questions of guarantee such as recovery discs, despite the many requests for assistance so that their web site seems to just be dead in the water.  My friend is willing to pay for drives but does not have to be from his pocket a copy of mickey mouse that is missed, it is not the kind of guy who wants to be illegal ect, any help would be appreciated, thanks in advance.

  Dave

  "Landcruiser80" wrote in message News: * e-mail address is removed from the privacy * .com...

  Hi, a friend who bought a new v2000 Compaq Presario back in 2005/6 should reinstall its OS XP home.  He has no recollection of any recovery disks and there is no partition recovery using F don't numbers ect.  I said maybe we could buy a new copy of XP home on ebay however, the number of sticker COSTS on the back of his laptop computer also appears in the BIOS, before spend us money on a drive someone can confirm that it will work on the assumption that the seller provides us with a COA sticker and license number?

  We tried HP/Compaq and they use now a third party (best2serve?) to solve questions of guarantee such as recovery discs, despite the many requests for assistance so that their web site seems to just be dead in the water.  My friend is willing to pay for drives but does not have to be from his pocket a copy of mickey mouse that is missed, it is not the kind of guy who wants to be illegal ect, any help would be appreciated, thanks in advance.

  Dave

  This site has a recovery disc for your computer http://www.restoredisks.com/default.aspx never used them but apparently they are reliable.  You may need to use the OEM key on the bottom of the laptop to activate so you make sure you get the correct version.

• Using recovery discs that have been put in place on another PC

  I have 3 computers HP Compaq Pro SFF x 6200.

  I have only created a disk of recovery for one of them.

  Now, I need to restore the other two PC (they no longer have the available recovery partition).

  How is the Windows 7 numbe series registrations affected if I restore this way or if it is not serious. Should I do a sort of regstry edit to change the serial number later?

  Thank you

  Monk

  One set of "Recovery disc" made on a specific model / product number should work on any other computer in the same exact model / product number. While each computer can have a unique Windows product key on the COA affixed to the computer, this key is not used by HP to activate Windows.

  HP and all the other major computer manufacturers generally use a system known as OEM SLP (System locked pre-ignition). This system allows many (dozens or hundreds of thousands) computers to be preactivated by using the same exactly OEM SLP key and OEM SLP certificate with a corresponding SLIC table in BIOS of the computer.

  You don't need to change anything, because that's the way the process is designed.

  Please click the White Star of KUDOS to show your appreciation

• Need recovery disc for a new disc of AF. Where can I buy these?

  My original for HP hard drive model p6267c died and I had to buy a new one.  However, the recovery disks that I made when I bought the computer do not work.  I found a page on the HP Support pages that show this is a known issue with the Advanced Format of AF drives which is what is my new drive and my original recovery disks will not work which they do not.  Recovery does not have the operating system in scores on the right for it to start Windows.

  The page that displays it is: http://support.hp.com/us-en/document/c03509131

  However, it says to contact HP Support.  My computer is no longer under warranty and he said I have to pay to call, send, or cat who is ridiculous.  If not, how can I get this new set of discs without being on the telephone or in a chat for a long silver cost period just know where to order these discs.

  I need drives for Windows 7.  I tried to purchase the full version of Windows 7, but can't find it otherwise, I would have been this route.  I tried to use Norton Ghost to copy my information from the old drive to the new without success.  I also tried restoring a backup and discovery of Windows is damaged.  It's my only option other than to get a new computer.

  I'm afraid that if I just ordered the new drives online, I couldn't correct records.  I have need of those shown on the link above and not those similar to what I created myself.  I appreciate a link to a page where I can order the new for readers of the AF.

  Thank you.

  Hello

  I don't see any way to get these 'up-to-date' recovery discs of HP, other than calling them.  However, there is a free and legitimate way to create your own Windows 7 installation disc as shown below.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( must be the same version that originally came with your PC - IE Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a very respected source (Digital River).

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Recovery disc is not compatible with newly improved hard drive

  Product name: HP Pavilion DV6-3042tx laptop

  Product number: WY364PA #ABG

  OS: Windows 7 64-bit (pre-installed)

  Error message:

  "This PC is not supported by the system recovery discs.

  You can continue to recover this system with these discs. »

  After you run a memory test, the results suggested replacing the preinstalled hard drive. I bought a new hard drive similar to the pre-installed, but with a capacity of 750 GB rather than 640 GB and has installed successfully. I then use the recovery disks created by the recovery program to install the original OS from the old hard drive to the new hard drive. Windows started to boot normally until a message appears indicating the error message is on top. What should I do now?

  Hello:

  I would just do this if you read the MS product key 25 character on the bottom of your laptop...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Or you can order a set of factory HP recovery discs and I hope they will work.

  http://support.HP.com/us-en/document/bph07143

  Paul

• best2serve pile of crap recovery disc

  Hello

  Two weeks ago, I ordered a set of recovery disc for an HP Pavilion ms215uk all in a desktop pc.

  I paid £31.06 for drives that turn up. (7 days from order to receipt) - fair enough.

  However - they did not work. Disc 1 is OK, but on the insertion of disk 2, I got an error in Dutch (not English) that the system recovery discs would not work on this system.

  Great Stuff - Hp cannot even provide the correct disks.

  Good so I then sent their emails of support of shit and got a response indicating that they would send others.

  7 days later the disks turned up and guess what?

  Yes - they do not have work - same message - Dutch once again - and after inserting the disc 2 disc 5.

  It's 2 weeks - no recovery drive of work for my system - and 10 coasters.

  What the hell is happening with this crap company. No phone support (now I know why) and only contact by email - which they have not responded to and its now more than 24 hours.

  All brands on the site - even HP Hp can't help saying that I need to contact best2serve.

  Well I can't contact them because there is no way to contact them outside of the email.

  As far as I am concerned the disks are under warranty and that I should beable to call and ask why they do not work or have at least my money I can buy a copy of windows 7 and do a reinstall completely Virgin.

  2 weeks is not good enough - I'm just glad that the discs are not intended for a customers machine. Best2serve are crap - useless - and not very reliable from what I've read on this forum and the net in general.

  Oh - and discs are not manufactured or factory - basically, they are 1 x cd blank with green dye and 4 x dvd with purple dye. In other words discs burned and unprepared discs.

  And they are not scratched btw.

  So my question is what you do about best2serve or Hp?

  I have to go to the negotiation of standards?

  Or

  I have to create a website denouncing the best2web service and support - I could do a good job of it too.

  Your call.

  concerning

  peedoffbigtime

  Hi Paul,.

  As promised I have news on the situation.

  And here are my results.

  After many phone calls and e-mails to Hp and best2serve, I figured out that the Pc should be sent repair.

  That's why the recovery disks wouldn't work - pc necessary fixation. EVIL.

  The recovery discs would not work because I had installed a new hardrive.

  The recovery discs check the dmi information in bios or dmi on the "original hard drive" string that is automatically written in sector 8 hard drive at the factory.

  Replace the hard drive or the motherboard and your recovery disks do not work.

  BIOS updates can mess up too, the dmi information which was not the case with this pc.

  It's the original Bios HP 2009 - there isn't another available on Hp website.

  However for some reason any (nothing that I did at all)-

  Model number: MS215UK

  Serial number: 123456789

  Version identifier: 94WEv6PrA2

  The string Featurebyte: 333rd 2S2V and so on

  Part number: VG256AA

  The country Code: #ABU

  has all the missing since the information screen of the bios by pressing F10 to access the bios.

  It was like that for / to the plant.

  To solve this problem, I used an Hp dmi tool that is not accessible to the public, but a google search for cpc_dmi hp tool should get what you need. He made me.

  The 2010 version is the one you need.

  So, I used the Hp Dmi's tool and the cpc_dmi.exe of a bootbale disk file and published this information.

  Once I had done that and saved the settings of the chip rom all the correct information was shown on the system bios screen.

  Now armed, knowing this info has been tattooed in the rom chip system I proceeded with the recovery disk install again.

  I used the cd 'First use this disc' and then started the drive 1 0f 4

  This now gave me a good screen of Hp recovery option rather than the screen in Dutch say the recovery discs would not work on this system message.

  Disc 1 0f 4 installed perfectly and so the other 3.

  My system is now recovered and working as it did in 2009 when purchased new.

  Then

  I corrected the error of recovery disks don't work do not.

  I stuck two fingers up to the Hp support.

  I saved myself over £100 + by sending only not in Hp update bios dmi information. (FIX my donkey)

  That said it took me two days to get this working correctly through complete trial and error, but I'm a happy guy now.

  Oh - and don't will never buy Hp again. They suck.

  Thanks for the help

• HP PAVILION ELITE E9280T D: CTO need new recovery disc

  I have a pair of old HP Pavillion E9280T desktop systems. I have recently installed a new hard disks on the two (both are identical machines, ordered that a pair of HP).  I also have a two sets of recovery disks that I made when the systems are new, saved on DVD.

  On a single system, I was able to successfully perform a full restore (return to factory settings).  On the other system, recovery stops on the 3rd disc in 68% and gives me the following error message: "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. 0xe0ef000e error code.

  I've searched the forums and found that many others have experienced this same problem.  I tried some of the proposed fixes, such as clean rags and Re-partitioning the hard drive.  None of them worked.
  
  For fun, I also tried to recover the system using the recovery of the other machine disks.  I discovered that I was able to do a full system recovery using these disks.  It tells me that I have probably a corrupt set of recovery disks and not a hardware problem.

  Unfortately, while it was fun to find out where the source of the problem, I can of course use the same set of recovery disc for both machines (I'm sure that Windows will blow up as soon as I connect to the internet and connect to MS servers).
  
  So my question is... what should I do?  I don't think that HP sells the recovery discs any longer.  But I have a copy of Win7 Pro that I paid for, trapped on the recovery discs that don't work.
  
  In advance, thank you for any suggestions or advice.

  OK... im going to answer my own question... I should have realized this earlier, before posting my initial question.

  I had a set of recovery disc for an HP same machine... at the beginning I don't think that I could use them... I did not know that the unique product key MS is not copied or assigned to the recovery discs... and since both systems where the same in all respects... it worked!

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Ultra-Slim 8000 elite: necessary recovery discs

  I need to get a set of recovery discs for an HP 800 ultra-Slim elite. I can't find on the website. Can someone let me know how to get them? Windows 7 pro.

  Hello:

  You need to order recovery for HP business PC and laptop disks by phone.

  If you live in the USA/Canada, call HP at this number to order a set of recovery disks.

  1-800-334-5144

  Have the serial number of the PC handy to give to the customer service rep.

• I need to install TOSHIBA Recovery Disc Creator on Qosmio F60 - 11F

  Hello.

  I have a Qosmio F60 - 11F and I install windows 7 ultimate 64-bit, I have installed all the drivers from the Toshiba site.
  I need to install the TOSHIBA Recovery Disc Creator & TOSHIBA Recovery Media Creator utilities; I search in the Toshiba site, but nothing is there.
  Can someone help me to download these utilities?

  Why do you need these tools?
  If you have installed your own version of the OS, these tools are useless, and for this reason, they are not available for download and installation.
  These tools, you can have if you install Toshiba recovery image only.

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Is it possible to download recovery discs

  Hi can anyone tell me if there is a website where I can download the product recovery disc for

  Hi Kelly,

  Sorry, I have to disappoint you. There is not the possibility to upload an image of a recovery CD.

  If you have a Toshiba laptop without recovery CD, you can call Service Toshiba partner and order a new one!

  You must sign a solemn statement and pay for the CD!

  Sorry, it's the only thing you can do!

  Hans Bye

• where can I get the recovery disc for my hp pavilion a6863w

  Hello

  I got a blue screen of death issue. So I was setting the pc to the factory settings using the recovery on the HARD drive system. During the process, the pc has picked up on and now it won't do anything. Right guard reboot, not even start in safe mode. My HP Pavilion a6863w did not come with recovery discs, a section on the HARD drive has been designated for this. Before this happened I was able to run diagnostics and everything going on. processor, memory, hard drive, everything passed. How can I get the disks to recover. I have a HDD Seagate Barracuda 750. Help, please. Thank you for your time.

  Hello

  You can order a recovery ofSurgeons of the computerdisk.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• Satellite M30X: Trojan horse - total Formate with recovery disc?

  Hello

  I had a Trojan horse on my Satellite M30X. My Antivirus deleted, but every time I've been connected to the Internet, it appeared again. Not connected to the Internet it doesn't give me any problems. As I couldn't get rid of him, I backed up all my data and do a fresh install from the recovery disc. As long as the button for LAN wireless is disabled, everything works fine, but just a little while, after I turned on it, I get a blue screen. When I restart my computer with WIFI turned on, it produces a blue screen before Windows is properly loaded, even during installation. I tried restoring 3 times, but it's always the same result.

  1 is it possible, that the Trojan horse destroyed things of the pre installation?
  2. I can't choose to make a formatting during the recovery process. All data are lost, but I feel that's not formate the hard drive correctly, when everything is destroyed. It crushes just stuff?
  3. is there a way to make a good formatting, then install completely new Windows?

  It is not a problem of my WLAN card, internet being no problem under Linux.

  Thank you for your help

  Todier

  Hello!

  If you use the whole HARD disk Toshiba Recovery disk will be formatted so if you have any virus or Trojans on your laptop, they will be also deleted.

  But what BSOD code are you have? Are you sure that's the reason why the virus?
  You have the same problem if you connect a network cable to the laptop?

  Good bye