Code 19 on a dvd external drive cdr

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Idddseas:

  • You have problems with the programs usually install driver
  • Code 19 error messages
  • Recent changes made to your computer no
  • What you have already tried to fix the problem everthing

Hello

19 code means there is a driver conflict such as two devices attempt to use the same resources.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • How can I get the utility auditor of system files (SFC) in Windows XP to search for the source files on a CD in a CD/DVD EXTERNAL drive instead of the CD/DVD drive internal Windows?

    I use a Dell Dimension E310 PC running Windows XP Media Center Edition.  The CD/DVD drive has stopped recognizing CD long ago.  (He still recognizes DVD but not CD).  I use an external drive to CD/DVD of Asus.  I keep getting messages that Windows need to replace versions unrecognized some Windows file and asks me to insert my source CD into the CD/DVD drive.  I checked the MS Knowledge Base and got instructions on how to use the utility (SFC) System File Checker to replace the unrecognized Windows files.  I started the process and inserted the source of CD files (recovery CD provided by Dell with the PC when I bought it) in the drive of external CD/DVD, but the SFC would not recognize it it.  He just kept asking me to insert the CD of source files in the CD/DVD drive.  So I have to find a way to get the SFC utility to find files in the external CD/DVD drive source - or I have to take the PC to the Geek Squad, buy a new CD/DVD drive and get them to install it.  Would appreciate any help you can provide.

    GO to start > run > regedit
    Access
    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup

    SourcePath = X:

    Where X: is the drive letter of your CD/DVD

  • Portege R100: Can't see dvd external drive

    I just installed a new internal 40 GB hard drive in my portege r100, I partitioned the drive and formatted. I also installed the latest version of the bios (I think it is 1.6) but I can not now install XP to dvd because the portege r100 do not see the dvd drive external usb which I think is a LITE-ON 8 x

    Any suggestions?

    Using the supplied with the machine recovery CD? Also the machine will only start on a TOSHIBA USB dvd player. If it is not made by Toshiba, you will not be able to boot from it. Sorry

  • Satellite L300, how to start from the cd/dvd external USB drive?

    I have an old laptop Satellite L300, latest version of the BIOS (2.20) installed.
    I would like to start on a connected external USB CD/DVD player
    PROBLEM:
    BIOS will not start on this CD/DVD disc.
    In the BIOS boot priority is: CD/DVD, USB, HDD
    BEHAVIOR:
    When starting, computer ignores the CD/DVD, ignores the USB and start on the HARD drive.
    QUESTION:
    Is it possible at all boot for CD/DVD USB external?

    Thanks for the efforts made to respond.
    Concerning

    It is NOT possible, I thought. REASON: The BIOS does not, does not reckognize CD/DVD (does not test if code such USB-CD/DVD bootable) drive connected via USB.

  • After the upgrade to El Capitan cannot insert CD/DVD in external drive

    Hello

    I have a Macbook Pro (mid-2014 retina) and I have this problem since I upgraded to OS El Capitan. Now I have the last 10.11.5.

    I can't insert a CD/DVD in the external DVD drive. It gets stuck at the end when it is like 80% already.

    I searched on the web before and there was a workaround solution that you put the CD in and reboot and it would work and it is indeed, but it's a pain that every time I work on the Macbook and in the middle of something and I want to insert a CD that I have to close everything and restart to get the disc inside!

    Once I do that, it works fine and I can eject and insert it again normally, but the first time I have to restart first, and since it's an external drive, I have connected it all the time, so whenever I connect it, I have to redo this same process.

    I was hoping with the last update that this problem could have been resolved for me obviously it's a software problem because it came with the upgrade to El Capitan, I've improved in later, but still problem is there. I hope that someone would have reached a permanent solution for this and I would be really grateful to know it.

    Thank you!

    Sally

    The external drive does the same thing on a different computer, be it mac or windows? Also is what brand?

  • I have an ERROR CODE 36 during the backup of my library of PHOTOS from one external drive to another. What is the best way to solve this problem? Also, what is someone used 'dot_clean '?

    I have a MacBook Pro that is primarily used for PHOTOS and use 2 external drives 1 for holding my PHOTO library and one for the back up. I have about 1 TB of data of photos. My back ups have worked perfectly since the establishment more than 12 months ago. However, I just got a CODE of ERROR - 36 problem which prevents the backup after that about 700 GB of data has been processed. I need to find a solution and I was wondering if anyone can advise me on that. I saw something called "dot_clean" on the web and I was wondering if it is safe to consider option.

    If the Photos or iPhoto is running, exit it and try the backup again.

  • Combo CDR/DVD SDR2102 drive will not read CDs or DVDs

    Hello

    I have a mobile Ergo Elite 4.
    The hard drive crashed and I bought a new one.
    I have loaded windows XP by using a boot disk but cannot get the Toshiba SDR2102 CDR/DVD combo drive to work. I had to load windows on via USB
    using a USB port.

    I can see the drive in windows Explorer, but it will not read the CD or DVD.
    I looked in the Device Manager, and it came with no warning mark.
    I tried deleteting, re-startup and he's back in the Device Manager.

    I'm trying to find a better driver, but it says that I use the best driver.
    I tried various Web sites using sand everywhere tells me that I do not need a driver for this drive.
    What I do, it seems as if the Combo driver is recognized but it will not be read whatever it is inserted, he said only: insert the disc.

    Does anyone know what I can try? or know where I can get drivers for it or software to test the drive?

    any help would be appreciated. :-(
    Some.

    Hello

    You n t need a special driver for the CD/DVD drive.
    CD/DVD players use the current Microsoft drivers already contained in the Windows operating system.

    In my opinion, you should first test different types of media. Please note that not all CD or DVD s are compatible. Distribute readers can't handle bad quality mediums.

    But we shouldn't t rule out a risk of hardware malfunction.
    Disk failure and you may wish to contact your dealer for a replacement.

  • When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

    When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

    Restart the computer and try again.

  • Force ejecting the DVD of the external drive

    I need to force eject a DVD into my external drive attached to a MACBook Pro.  I'd appreciate any help - I know there is a way to do this!

    Launch the Terminal.

    Applications > utilities > Terminal

    Type in drutil eject external  internal

    Press ENTER.

  • Desperately need to find an external dvd - rw drive

    I just bought a HP Slate21 Pro, which runs on the Android OS 4.3.

    I need to find an external dvd - rw drive which is compatible with the particular operating system on my new desktop.

    I have USB 2.0 inputs available, but cannot find any external drive that claims compatibility with Android 4.3.

    Suggestions or product names would be so great!

    Thank you very much!

    Hello

    I suggest that you go to the Xdadevelopers site and look around for the optical drive support Andriod.

  • external DVD - BR drive not detected in windows 7

    Original title: confused beginner "Arrrgh".

    Installed new drive enternal DVD - BR, Trouble Shooter says: win. ' value' does not detect. Where how &? 'Enable '.

    Hi Kenneth,

    Thank you for writing to Microsoft Communities. From your problem description, I understand that you are unable to access the DVD drive - external BR. Please correct me that I misunderstood.

    Kenneth, I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    Please provide us with additional information by answering a few questions below.

    1. what version of windows is installed on the computer?

    2. What is the brand and model of the external drive of DVD - BR?

    3. what exactly happens when you connect the external DVD - BR player to the computer?

    4. What is the error message that you receive?

    5. what store did you run on the computer to get the fixed number?

    6 other external devices detected via USB (Universal Serial Bus) ports?

    I would suggest trying the following troubleshooter and check if it helps.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    You can also download the latest driver for the external drive of DVD - BR on the manufacturer's Web site and check if it helps.

    Answer us with more information on this subject.

  • CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

    CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

    Try following the steps under "Windows XP" in the article following the MS KB:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • I'm trying to backup to an external drive my contact Outlook .pst files. I get an error code 80070021 Ox who says that the files are either locked by another program

    original title: error 0 x 80070021

    I'm trying to backup to an external drive my contact Outlook .pst files. I get an error code

    Beef 80070021 which says that the files are either locked by another program. I just put all these contacts on iPhone.  What should I do to fix this?

    This problem is caused by a MS Outlook Add In which prevents closing Outlook. Add in that is usually responsible for cauysing this problem is one that search/indexing of the tool. The remedy is very simple:

    (i) with Outlook open, go to Tools Menu
    (ii) click on "Trust Center".
    (iii) in the left pane, choose Add-Inns, and then near the lower part of the window, you will see a button that allows you to manage your COM Add-Ins.
    "(iv) to ensure that the drop-down list is set to ' COM Add-Ins" and then click on OK
    (v) select Windows 'Search Email an indexer' and then click 'remove '.
    (vi) click OK, and then close Outlook.
    (vii) re - open Outlook and run the backup. (The program will tell you that Outlook must close the first before saving). Everything should be OK.
    If any problem contact me at * address email is removed from the privacy *.
    I hope this helps.
  • DVD RW drive has an error code of registry 19. I can't use the drive and it is not visible as a drive.

    My lite - on dvdrw lh-20a1l ata device does not work.  Device Manager appears with the following text:

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

    I tried looking for solutions, uninstall driver and reboot, reinstall the software provided with the machine, running regecure software to clean the registry and nothing has solved the problem so far - you have ideas?

    19 code means there is a driver conflict such as two devices attempt to use the same
    resources.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then check the cables
    both ends. Remove and replace, do not just tight. For laptops, you can often clean the
    power and data of the contacts with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the system manufacturer
    and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
    Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
    others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

Maybe you are looking for