Code 19: Windows Mobile Device icon not found on my computer

Similar Questions

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• Upgrade Windows 7 recommended to uninstall Window Mobile Device Center 6.1 now DVD does not play

  Upgrade Windows 7 recommended to uninstall Window Mobile Device Center 6.1 now does not play on the CD player

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Windows Mobile Device Center works very well, but then all of a sudden will not get connected mobile, it remains disconnected even if the PC sounds when the phone is attached to the USB.

  Windows Mobile Device Center installed. If I reboot computer everything works fine and he

  might work for 1 hour or 1 day, I can connect and disconnect the phone and it appears every time,.

  but then sudeenly it stops working.

  When I attach the USB of the computer phone rings (because it connects), but then nothing happens

  in Windows Mobile Device Center, the phone remains disconnected in Windows Mobile Device

  Center. It's really enoying!

  Any suggestions on how to debug/fix?

  Work around: someone knows how to restart the Windows Mobile Device Center without rebooting

  computer?

  I already tried to reinstall Windows Mobile Device Center, did not help. Both CD

  comes with the phone and software downloaded from Microsoft.

  I'm really stuck!

  Help, please!

  / Marcus

  It's a Samsung Omnia II GT-I8000

• Not able to install Windows mobile device Center 6.1 in the context of the system

  Hi all

  We are not able to install Windows Mobile device Center 6.1 in the context of the system. We have only 2 options to install any application via SCCM. (1) user, 2) system context. In the context of the user, we will not be able to install the application and system installation of context is a failure. Exe installs fine when we run as admin, but we do not have admin context option in SCCM 2012. Please confirm that we have any other new exe or we can not install in the system context.

  Kind regards

  Ashok

  To help you install Windows Mobile Device Center on Windows 7, see the Jason-H position of this link.

  Let us know how it goes.

  Thank you.

• I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  See http://support.microsoft.com/kb/931937

• Windows 8 does not support Windows Mobile Device Center 6.1 and 6.5?

  Windows 8 does not support Windows Mobile Device Center 6.1.    Anyone know of any solution to the connection on Windows 8 terminals with Windows Mobile 6.1?

  Hello Manu,

  Thanks for posting your query in Microsoft Community.

  From the information you have provided, I understand that you need information on Windows Mobile Device Center for Windows 8. I will certainly give you with this information.

  Microsoft Windows Mobile Device Center replaces ActiveSync for Windows Vista and Microsoft Windows 7.

  Windows Mobile Device Center 6.1 is currently available for the following versions of Microsoft Windows Vista.

  • Windows 7 Ultimate
  • Windows 7 business
  • Windows 7 Professional
  • Windows 7 Home Premium
  • Windows 7 Starter
  • Windows Vista Ultimate Edition
  • Windows Vista Business
  • Windows Vista Business
  • Windows Vista Edition Home Premium
  • Windows Vista Home Basic
  • Windows Vista Server

  See the link.

  http://support.Microsoft.com/kb/931937/en-us

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

   

• WIndows Mobile Device Center 6.1 on Satellite P100

  I have Outlook 2007 with Vista on my P100-160 and need to sync with my Mio PDA. It worked well with ActivSync and XP - Pro, but now I have problems to install WMDC.

  The PDA is installed and visible with the Explorer of files and Media Manager, so it's here. I downloaded the x 86 version of WMDC Installer but nothing seems to happen when I run. I can see WMDC on the Control Panel, but it only shows the communication by default user interface when I click it.

  Any advice on how to install this application or this is a problem for others too?

  Hello

  I can't provide a lot of information on this tool, because I m not the owner of a Pocket PC.
  But I studied a bit and found this site from Microsoft.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=46F72DF1-E46A-4A5F-A791-09F07AAA1914&displaylang=en

  The new Windows Mobile Device Center supports devices such as:
  -Windows Mobile 2003
  -Windows Mobile 2003 second edition
  -Windows Mobile 5.0
  -Windows Mobile 5.0 with Messaging and Security Feature Pack
  -Windows Mobile 6
  -Windows Embedded CE 6.0

  If you want to install the Windows Mobile Device Center on Windows Vista:
  1. connect your device to your PC.
  2. Select run this program from its current location, and then click OK.
  3. follow the instructions on the screen.

  Important: Your device must be connected to your PC for Windows Mobile Device Center to run after installation

• To connect to a shared folder between PC - error Code 0 x 80070035 "network path not found."

  I have a client with 8 computers on a workgroup network.

  Among youth, 2 computers not talking to each other or to connect to shared folders on the other drive. Both computers will speak on other computers on the network (wireless).

  I looked at all the solutions that have been validated for the message Error Code 0 x 80070035 "network path not found." and none of them have solved the problem. I can't ping one computer to another. I noticed that when troubleshooting on the PC (both are desktop windows 7), 'client' that when I ping the other PC it returns an IPV4 (192.168.x.x) address, but when I ping another PC on the network returns an IPV6 address. I tried to turn off IPV6 adapter in the network adapter settings. It made no difference. I searched several 6to4 adapters in Device Manager, but only 1 exists. Turn it off did not seem to make a difference. As I said, both PC's are accessible by other computers on the network (wireless), but they cannot access each other.

  Restart both computers several times (including cold starts and stops).

  The only one I don't have not tried yet is releasing and renewing the IP address on both.

  Any suggestions?

  Well I fixed it myself.

  In this case, there was a number of things I've done.

  First of all, I checked to make sure that the firewall is not the issue. It wasn't.

  Secondly, I checked the network connection to see if it has been set to the office network. One of them was, and that we have tried to connect to a was created for the Public network. Who changed the network and restarted.

  Who has not solved the problem.

  Finally, in desperation more than any other thing, I restart the network modem.

  Guess what? That fixed the problem.

  So, I guess it was a problem of ARP table or some other problem. When I tried to ping from the "client PC' on the shared drive PC, the IP address was 192.168.1.65. When I got the customer go to the drive shared PC and check the IP address it is 192.168.1.69.

  Restart the modem and the "client PC" has solved the problem.

• Bluetooth device driver not found Sony BDV - E3200 BLU - RAY HOME THEATER System

  I try to connect Dell LATITUDE E5430 laptop Windows 7 Bluetooth for Sony BDV - E3200 BLU - RAY HOME THEATER SYSTEM.

  The driver is not installed successfully, and I would also not find driver online and also Windows Find driver during troubleshooting.

  How do I find the right driver so that I can download and install it.

  I tried with Windows Mobile Device Center for Win 7, but still not found the solution.

  Thanks in advance.

  Amul Patel

  Try to install the drivers Bluetooth from here:

  http://www.Broadcom.com/support/Bluetooth/update.php

  Please uninstall the existing Bluetooth drivers completely, restart the PC, install the new drivers, reboot the PC and then check.

  If you are still unable to connect to the home theater system, please contact Sony support for assistance.

• Bluetooth device driver not found after accidental uninstall (Win7 64 bit)

  I use a Plantronics M50 bluetooth headset on my mobile, Skype etc. All troubleshooting yesterday (had a problem with the microphone volume is very low) I followed a few steps of an article if found on a Microsoft forum, telling me to uninstall the driver, as well as to restart my laptop (Win7 64 bit) would recognize and re - install the driver.

  In Device Manager, I right-click on the M50 (under audio, video and game controllers) device and chose to uninstall (as prescribed in the MS article). Here's where I shot myself in the foot; I ticked the box "Delete the driver for this device" (thinking that Win7 would get a fresh driver from Windows Update to reboot)

  After the reboot, my laptop started to reinstal the driver device, but for "Bluetooth device" reports "no driver not found"

  I myself tried in vain things:

  • tried to find the driver sur.com, but isn't available (plug-and-play)
  • installed software (incl. Plantronics Control Panel) Plantronics package
  • I tried Windows Update
  • installed Microsoft Windows Mobile Device Center 6.1 Driver (as advised on various sites to set "Bluetooth Peripheral Device" reports questions 'no driver found'

  At the hope that someone had a suggestion for what else to try, or maybe how to find out what that exactly that I deleted by choosing 'delete the driver for this device '.

  Thanks in advance!

  Edit:

  Just in case it helps, I noticed that the following folder is created at the time of uninstal and reinstal, containing calisto.inf, calisto. PNF and Calisto.cat

  C:\Windows\System32\DriverStore\FileRepository\calisto.inf_amd64_neutral_2b13d4544d6cf2e6

  I decided to use Sytem Restore to restore my system to before I uninstalled the driver. There are a few downsides to this, but so far the benefits outweigh them.

• INSTALLED 'Windows Mobile Device Center' always have this lack bluetooth perirpheral driver

  I have a Dell 7720 runing WIN 7-64 bit with an android HTC6435lvw DNA 4.1.1 version

  It seems nevertheless to see the laptop and has paired with the phone.  I found the pc on the phone! both are unhiden and paiared...  Dell safe@Office for bluetooth is installed... After both matching, Windows appears, asked me if I would like to ask the play buttons blue tooth for music that is on the phone... I clicked Yes... works great!

  In the Manager device theres a driver missing...?  Is the bluetooth device?  I happened to see which driver he was looking for!...  Yet, after doing a reboot (to see if it's what it takes)... I can't find this DRIVER info now... I downlaoed and won in the ' Windows Mobile Device Center ' for win7 64-bit, and I installed it... Yet the pilot missing again! so I said to the driver for the htc phone and the pilot of ' Windows Mobile Device Center ' guess what? There still playback, its lack a driver?

  Dose anyone have clues to explain why this is?  Is there something more I CAN do? Even if its too yellow! say its lack a driver... the phone AND pc pairing works as it should... Laptop parts my music I can send a files get both phone n pc... Still not with the ' Windows Mobile Device Center ' I turn on nothing happens at all, advances said disconacted... I can play with the settings, it's that...  Back, someone DID it no clue as to why I still see yellow driver missing in Windows Device Manager?

  TY for all those of you who has TAEKN THE TIME to read this...  Those who meet

  GOD BLESS...   PEACE TO ALL! ..............

  HANK K CHALMERS

  Hi Hank,

  Thanks for the detailed description of the issue.

  This error can occur if you do not have an installed device driver or if you have a device driver obsolete for your Bluetooth device.

  Method 1:

  I suggest for the link and follow the steps and the other links given in the article.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  http://support.Microsoft.com/kb/2654568#appliesTo

  Method 2:

  Uninstall and reinstall the device drivers. To do this, follow these steps:

  a. click on Start

  b. Manager type of devices in the Search box and press ENTER.

  c. click continue. The Device Manager dialog box appears.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  d. in the list of types of devices, right click from device, and then click Properties.

  e. click on the driver tab.

  f. click on Uninstall.

  g. click OK.

  h. restart the computer that automatically reinstalls the drivers.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Installation of Windows Mobile Device Center in Windows 7 Home Premium 64-bit

  I had been Active Sync with my Palm Treo.  I bought a new computer with Windows 7 Home Premium 64-bit. So I downloaded and tried to install drvupdate - amd64.exe, the 64-bit version of Windows Mobile Device Center for my AMD Athlon II X 2 2.7 GHz e-machine.  By running the installation program, it seems to make progress and then in the Middle, it seems reverse-the remaining time runs backward, and the installation Bar starts going right to left rather then from left to right.  I get no explanation, no code error and no results.  Windows Mobile Device Center is not in my list of installed programs.  I don't think to close my anti-virus programs.  How can I install Windows Mobile Device Center 64?

  Thank you.  Before I had this message, I got the WMDC installed by stopping antivirus, Carbonite and uninsralling law service programs!  I am not sure that I had to do the latter, but I thought that the law! Outlook may have hurt service.  However, I will use the set of instructions that you gave me for a problem with separate installation that I am now known (Office 2003 SP3).

• Windows Mobile Device Center crashes because of the police

  Windows Mobile Device Center on one of the computers of the user randomly started crashing any time that it is opened from the control panel. I enabled logging according to this site (http://www.pocketpcfaq.com/faqs/wmdc/debug/index.htm) and found the trace of the following error in the log file. It seems to be the accident as he tried to use a TrueType font, no. Display the user policies are all resolved by default Segoe UI 9pt. I also tried on another account on the computer with the same result. Which fonts would be Windows Mobile Device Center trying to load that causes this crash? There are a few 3rd party barcode fonts installed but they are TrueType, and I guess that Device Center would not try to load those.

  18/10/2012 09:26:26

  C:\Windows\WindowsMobile\wmdc.exe (6.1.6965.0)

  -Start logging-

  WMDC Verbose: 1: create the new instance of PartnershipCollection

  DateTime = 2012-10-18 T 13: 26:26.1626775Z

  WMDC information: 0: PartnershipCollection::Initialize enter

  DateTime = 2012-10-18 T 13: 26:26.1782824Z

  WMDC information: 0: PartnershipCollection::Initialize - Devicemanager starting with CurrentPartnershipProtocol:3, MinimumPartnershipProtocol:2 and current DeviceManager version: 0x06011b35

  DateTime = 2012-10-18 T 13: 26:26.1782824Z

  WMDC information: 0: updated list of registry partnersips

  DateTime = 2012-10-18 T 13: 26:26.1782824Z

  WMDC information: 0: updated list partnerships disabled in the registry

  DateTime = 2012-10-18 T 13: 26:26.1782824Z

  WMDC information: 0: last connection partnership:

  DateTime = 2012-10-18 T 13: 26:26.1782824Z

  WMDC information: 0: PartnershipCollection.RaiseStateChanged (device:, State: NoPartnershipsNoDeviceConnected message :))

  DateTime = 2012-10-18 T 13: 26:26.1782824Z

  WMDC information: 0: PartnershipCollection::Initialize output

  DateTime = 2012-10-18 T 13: 26:26.2250971Z

  WMDC information: 0: Main.Main - start Windows Mobile Device Center UI

  DateTime = 2012-10-18 T 13: 26:26.2250971Z

  WMDC critical: 6: exception in thread System.Threading.Thread unmanaged:

  System.Reflection.TargetInvocationException: Exception was thrown by the target of a call. ---> System.ArgumentException: only TrueType fonts are supported. Is not a TrueType font.

  at System.Drawing.Font.FromLogFont (object lf, IntPtr hdc)

  at System.Drawing.Font.FromLogFont (object lf)

  to Microsoft.WindowsMobile.VisualStyleUtilities.GetFont (VisualStyleRenderer renderer)

  at Microsoft.WindowsMobile.DeviceCenter.Main.OnThemedChanged)

  to Microsoft.WindowsMobile.DeviceCenter.Main... ctor (uiEvent ManualResetEvent)

  -End of the exception stack trace internal-

  at System.RuntimeMethodHandle._InvokeConstructor (Object [] args, SignatureStruct & signature, IntPtr declaringType)

  at System.RuntimeMethodHandle.InvokeConstructor (Object [] args, SignatureStruct signature, declaringType RuntimeTypeHandle)

  at System.Reflection.RuntimeConstructorInfo.Invoke (BindingFlags invokeAttr, Binder binder, Object [] parameters, CultureInfo culture)

  at System.RuntimeType.CreateInstanceImpl (BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, Object [] activationAttributes)

  at System.Activator.CreateInstance (Type type, BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, Object [] activationAttributes)

  at Microsoft.WindowsMobile.WindowsMobileDeviceCenter.Launch)

  at System.Threading.ThreadHelper.ThreadStart_Context (Object state)

  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)

  at System.Threading.ThreadHelper.ThreadStart)

  DateTime = 2012-10-18 T 13: 26:26.5059853Z

  WMDC critical: 6: Common language runtime ends.

  DateTime = 2012-10-18 T 13: 26:26.5059853Z

  It seems as if the Cache of police of GDI + has become corrupted somehow. Removal of the GDIPFONTCACHEV1.dat\AppData\Local C:\Users\ and C:\Windows\System32 corrected the problem and enabled Windows Mobile Device Center launch.

  I looked on another machine and GDIPFONTCACHEV1.dat was not in the folder System32, but was in the AppData folder. I'm not sure how it got there on the machine of the problems.

• Windows Mobile Device Center 6.1 will synchronize is more on mobile

  Hello

  I'm having a problem, try to synchronize the different features of WIndows Mobile with my PC.  I have WMDC 6.1 installed on a WIndows 7 64-bit machine.  When I place a device in its cradle, WMDC returns an error "FAILED.  Windows Mobile device - this device cannot start code 10 ".
  On the device, I see a message "Connect to USB - authenticated user" but cannot connect to my PC.

  I tried this on a clean install of PC (Windows 7) with no updates of windows and it works fine.  Everyone comes through this?  Any idea what windows update breaks my sync?

  Thank you
  FrancoCSP

  Hello

  1. is specific to this particular device question?

  2 have you made any changes to the computer, before the show?

   
  Method 1:
   
  Run the fixit available at the following link.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us?EntryPoint=lightbox
   
  Method 2:
   
  Uninstall and reinstall the USB controllers.
   
  a. click Start, in the search box, type in devmgmt.msc and press ENTER.
  b. Locate the USB controllers, right click on each one of it and select Uninstall.
  c. once has an option remove drivers
  d. restart the computer.
   
  After the computer restarts, Windows will automatically install the drivers.
   
  Method 3:
   
  Since you are able to connect the device when no windows update is installed, I suggest you to check the update causes this problem.
   
  Step 1: Perform a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.
   
  Step 2: Install an update at a time and check the status after each installation.
   
  See also,
   
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104