Similar Questions

• I received the confirmation e-mail regarding my purchase of Photoshop CS6, CS6 InDesign and Illustrator CS6 of Digital River. I don't see in the history of orders. How can I start the download then?

  I received the confirmation e-mail regarding my purchase of Photoshop CS6, CS6 InDesign and Illustrator CS6 of Digital River. I don't see in the history of orders. I see the link in the email, but when I click it, it comes out error HTTP 500 - access not issued token STATUS not!.

  Download software CS6 Adobe here:

  Download Adobe Creative Suite 6 applications

  Install and enter your serial number.

• Lost my product key of Windows 8 and the Confirmation email, how do I find my key

  I bought windows 8 back in October today I had to reinstall windows, but I can't find my product key announcement I seem to have deleted the e-mail confirmation by mistake. Is there anyway I can recover my key of Windows 8?

  I bought windows 8 back in October today I had to reinstall windows, but I can't find my product key announcement I seem to have deleted the e-mail confirmation by mistake. Is there anyway I can recover my key of Windows 8?

  Hello

  Go to the following site.

  Electronic download Support software phone numbers:
  http://support.Microsoft.com/GP/ESD-support-phone-numbers

  Locate and call the phone number for your local area.

  You will need to provide your personal information, such as the email address you used, credit card number, etc. They'll send back the confirmation e-mail.

  When you get the product key, print or copy him and put it somewhere safe.

  Concerning

• Add number amount and the confirmation to the dynamic stamp?

  Hello and thank you for this forum.

  I managed to create a dynamic, successful stamp may be a bit optimistic, but it's a case of 3 lines and one works.

  This is the image which I created the stamp:

  

  The work of the date line; I removed the timestamp, but mmm dd yyyy work very well. Except that it's not quite what I want to do and I have since learned that once there, it is not editable. I downloaded the API and, like many before me, am overwhelmed!

  What I'm trying to do is to create a stamp in which I can manually enter references in each line. It is to pay a payments then date will always be a few days in advance and, of course, the amount and the confirmation number will also vary. Like this:

  

  I tried everything what in fact one form, but of course, when it became a stamp, I couldn't on deposits more.

  I know that I spend a lot more time trying to create this thing I would have if I used the text box (which I am currently) and entered manually each payment for about two years! But having come so far, I'd really like to finish instead.

  So. Two questions, I guess. First of all, it can be done? Second, how?

  Thanks a lot for help.

  -G.

  Yes, it's possible, but it's complicated for a beginner. The best way is to use JavaScript to create a custom dialog box that prompts the user to enter information. It should look like this:

  

  When the user clicks the OK button, the code in the stamp copy the values of the fields in the dialog box that is customized to the fields in the form on the stamp and the stamp is then applied to the page. When the buffer is applied, fields is flattened and therefor cannot be changed by the user.

  This is what looks like the following:

  

  The problem is that the creation of a dialog box custom is not simple for beginners to create or simple to explain. This is a book that contains information: http://www.amazon.com/gp/product/B008KODLJ0/

  I would suggest finding someone to create the stamp for you, and you would be able to learn from him.

• Cannot start Acrobat DC. Could not receive the confirmation e-mail. How can be changed the e-mail address?

  Cannot start Acrobat DC. Could not receive the confirmation e-mail. How can be changed the e-mail address?

  Hello

  The following link will guide you on how to change your email address associated with your Adobe ID

  Change the e-mail address associated with Adobe ID.

  Please follow the steps and let us know how it goes.

  Concerning

  Sukrit diallo

• HP 15-f305ddx: I haveva hp 15-f305dx with an error code and the password of the bios 58495227

  I have a haveva hp 15-f305dx with an error code and the password of the bios 58495227

  Thank you so much, you're the best

• I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  Download and install the update/s who is / are relevant to your computer manually.
  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=974771&displaylang=en&stype=s_basic

  TaurArian [MVP] 2005-2010 - Update Services

• I've been locked out of my email for a month! I remember the answer to my secret question and the default e-mail is the same address!

  I've been locked out of my email for a month! I remember the answer to my secret question and the default e-mail is the same address!

  Looks like you're talking about Hotmail? If so, please ask here.

  Windows Live Solution Center Forum Hotmail Portal
  http://windowslivehelp.com/product.aspx?ProductID=1

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Newbie wanting to AIR w / extensions to native code and the Protocol of Android accessory

  My interests include prototyping and very specific to very specific real-world applications of programming solutions.  So I bought a Playbook after viewing the quick "prototyping" video in this blog:

  http://devBlog.BlackBerry.com/2011/12/BlackBerry-PlayBook-Arduino/

  I tell myself I can do cela or something similar with PIC Basic Pro and a Microchip IC.  Although it has been nearly six months, from what I can tell, the RIM developers have failed to deliver on explaining how to use native code and the ancillary Protocol Android to connect in series on client's port to the mini-USB of the Playbook.

  Is RIM people please, show us how set up the programming environment, use the code, the mini-USB port on client Playbook, the adapter USB (where to buy, what is it exactly?), so we can use the USB client connected to an Integrated Circuit Programmable to connect in series with an AIR running on the Playbook application.

  Kenneth Mark Klausner

  How this kind of thing is that you have the hardware (Controller USB etc.), and there different registers, buffers, etc. that must be handled.  The first layer of software, what made this manipulation, is a device driver. While in some operating systems (Linux, for example), you can write yourself, or port code Besides, material in the PlayBook is accessible only by the drivers as part of the operating system, which means that the RIM should provide their.

  These drivers are may be incomplete. We do not know that for some.

  Drivers expose a particular interface to the next higher step of the software, an interface that must be respected. This interface is generally quite low, and the driver can support the features that cannot be exposed to third party software, so for this and probably other reasons, we can not directly access (and are prevented by security mechanisms).

  There is another layer of software on top of the pilot, commonly called a library. This library is also provided by RIM, as part of the operating system.

  This library can be incomplete as well. We do not know the details, but I suspect someone who knows this level of the design of the system and who attended the BB10 Bluetooth and USB discussion group would be able to interpret what they heard there to clarify.

  It's this library which provides what we call a bit of hand-wavingly API 'USB '. This is an interface in C language, with a set of data and calls structure function definitions that enable higher level code perform different operations related to USB.

  If you want to write a DONKEY, you write about this library, not the level of driver and not material. You have no choice in this matter, as it is applied by the security of the OS.

  So to sum up, if we refer to 'USB API' they're talking about essentially the library routines, and it is necessary to talk to this API to get whatever it is the case here.  The API can be described in the header files (there is something), or maybe he's going to be an API different than what I see out there. Whatever it is, it is undocumented in other places at the moment, so all who want to enter this need to make much low level experiment (talking to the library).

  They can have the documents which cover this and perhaps code samples to talk to the library. If the version of the operating system we have has the incomplete versions or buggy drivers or libraries, this could explain why they have not pushed this documentation and code for us.

  I think that I heard that they are gathering input (requirements, use cases, comments) from people in this session.  Who tells me that they are still working on some details, and when they are at a stage like that they simply don't tell us publicly where they are, deadlines, or what it will look like when it is done.

  And so expect.

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• I got a new macbook pro and I want to spend my Adobe Creative Suite: Production Premium programs on it. I have no more the installation disc. I have my product code and the serial number for the facilities so. How can I do?

  I got a new macbook pro and I want to spend my Adobe Creative Suite: Production Premium programs on it. I have no more the installation disc. I have my product code and the serial number for the facilities so. How can I do?

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• I get the same messages code and error with Windows Mail for a week that the person in the previous announcement.

  It seemed to have started running last week when we had a huge update of Windows.  Windows Mail does not connect to the top through our wireless network.  He tries to go through several dial-up non-existent.  It is not a problem with my server.  I checked with them.  I tried to pass even if Windows Mail, with tools, through accounts, properties.  Once I get in the window with about 8 tabs on it, I can't get into any tab, except that might do me some good.  When I click on the Connections tab, my computer hangs in Windows Mail, and I leave Windows Mail.  Is there another way to get into Windows Mail to set the connection to Windows Mail?  Is there a way to get my computer to get the network wireless set up as the connection by default because the way he is now, he won't put the connection wireless as the default connection, even if I'm signed up to this time.  It's a problem that has arisen recently and it is extremely annoying.

  Try to compact and repair the database first (see www.oehelp.com/WMUtil/) to rule out the possibility that it is a question of database.

  Then go to tools | Options | Connection and see if you can set the correct connection there.  Then go to tools | Accounts | Add | Post and add another copy of your e-mail account with the correct settings.  Before you download messages, go to tools | Accounts | Mail | The original properties and uncheck the include account when sending and receiving.  Then check mail on the new account you set up and see if it works.  If so, you can delete the old account.

  If it is still a question, then see point 3 here: www.oehelp.com/OETips.aspx#3 to exclude interference antivirus and see point 15 on this page for updates which could have done (nothing to do with your problem).

  Steve

• When you delete an email, often both enamel stressed I want to delete and the following e-mail are both deleted, not one only. How to change that?

  When I delete an email which is highlighted and displayed on my screen, several times but not always, the following e-mail that is displayed is also deleted. It just started doing this a few weeks ago. How to return to the removal of all email that appears? I appreciate all help.

  Try a new/other mouse. Looks like yours is to give a double click when you just click.
  If you use the DEL key on the keyboard is only the removal of a message?

• How can I fnd my claim code and the reprint of the web services information sheet

  Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

  Could not find anything under Printer Control Panel either. Please advise!

  Thank you!!

  Hi Chris88,

  Welcome to the HP Support forums.  I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

  If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service.  The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network.  I've included the specifications of the printer for your reference.

  If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code.  You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide.  Please follow the instructions in step 1.

  HP Deskjet 3520 inkjet printer specifications

  User's Guide e-All-in-One Series HP Deskjet 3520

• The create a System Image will save the FPGA code and the RT code?

  I have some cRIO systems which were broadcast in our manufacturing plant for some time. A slight problem has been discovered in the programming and created a workaround solution, but a fix should be implemented. Currently, I have no way to test my new code without loading on the cRIO and it works on the tool while the product is running. If there is a problem and I need to do some debugging, the tool cannot be down for an extended period. I would write a vi that will save an image of the cRIO so I can reload the software that is currently running and prevent a situation of prolonged downtime.

  My question is, when I did in the past with a product that has different tests, calibration and the final client software RT, it seems that the code FPGA not be saved (not a big deal at the time since the new FPGA code was compatible with different deployments RT). The new FPGA code won't be compatible with the old RT software, so now I'm worried. I would like to just check on it until I have all the boss breathing down my neck. If the service will not save the bitfile FPGA, is there anything else I can do for the tool to return to the previous running state while I solved problems that may exist with the new code review? The original code was lost by my predecessor. Otherwise, I would use just that.

  Hi Jeremy,.

  You are right, because the create a System Image does not record the bitfile with the image of the RT. Using the configuration system API, you will need to deploy the RT image and then the bitfile FPGA compiled later. To ensure that you can return to the previous version of the software running on your RIOs, you could simply save the current image and bitfile before deploying the new image and bitfile.

  However, the best way to proceed is to use replication Deployment Utility (RAD of OR). I have provided the link to the tutorial on the wheel, where you can download the utility. This exe will make images of the any of your RT targets and will also include the bitfiles with them. You can also deploy these images to several targets at once. In particular, you can read about the Bitfile (s) configure for FPGA Deployment Flash; the bitfile will be deployed at the start when stored in flash memory.

  Replication and deployment (RAD) utility-

  http://www.NI.com/example/30986/en/