Code dashboard not there?
So, I opened CC to download and install the edge code. However, I opened CC and there is no code on board all, screenie for reference:
Nevermind, saw this:
Tags: Adobe
Similar Questions
-
There is in any case for the games on the computer without the CD of restoration, we have the Product Code but not the cd, we have misplaced it?
There is in any case for the games on the computer without the CD of restoration, we have the Product Code but not the cd, we have misplaced it?
borrow the CD, install the game and put in your code. If you don't know anyone with a CD, you will need to buy the game again. teengeek.freehostingcloud.com
-
I can't install the update to windows KB2680317 update for Microsoft Works 9. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?
Hello
I would suggest trying the following methods and check if it helps.
Method 1:
Put the computer in a clean boot state, and then try to install the updates and check if it works.
How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.
Method 2:
Try the steps in the Microsoft article and check below if the problem persists.
The problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 3:
Try to download updates from the Microsoft Downloads Web site and check.
http://www.Microsoft.com/download/en/default.aspx
And also to try the steps in the following Microsoft article.
http://support.Microsoft.com/kb/818018/en-us
Hope the information is useful.
-
Access code did not work, now iphone 6s is off the display to connect to itunes
Access code did not work, now iphone 6s is disable showing connect it with itunes, futher when I connect with I phone I started to update and there is the mode of recovery after 15 min do not know what to do
Restore is the only option here.
-
I nee a new code, my code does not work
Dear Sir or Madam,
a friend restalled my laptop and I need a new code for my window at work, because my old code does not, please could you give me the phone number to get a new code or could you give me a new code.
Thank you
Yours sincerely
bobsargent
Hello
You don't need to buy a new product key.
Use the appropriate method of re-setup to reinstall Vista and activate it.
There are several methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
the source code is not available
the JDE show me this message
the source code is not availablein the race... I can do pleaseeeeeee?
Thank you for all
I got it when I reset for Simulator was told there is an exception. I found and solved
-
I'm trying to redeem a code but it says that the code is not valid is not true.
I just got a code for my school to use Adobe cloud. There is no way that the code is not valid because I literally just it generated from the site of the school with a contract number and the registration number. However, when I go to enter the code (in the link provided by Adobe) I get a message that says that the code is not valid. The code is not invalid, and I'm typing correctly. Why it is not being recognized by Adobe? What gives?
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
- and https://forums.adobe.com/thread/1572504
or
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
Lightroom6 installation code does not work
I'm tired, the installation code does not work.
After 10 days, there is no way to be supported by Adobe, but they took my money.
I'll block the payment and never again buy Lightroom.
Mac or Windows and EXACTLY what version of the operating system?
Recent Mac AND Windows operating systems have been known to cause problems "weird."
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html
-or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
-
My product code is not long enough to get my serial number for installation
I bought Adobe Photoshop elements 13 Best Buy last night and I looked EVERYWHERE for the 24 alphanumeric product Code to get my serial number for installation.
(Phew, that was a mouthful! lol) Product on the zone & coordination brochure Code is there, BUT the code is NOT long ENOUGH.
There are 6 squares to insert the numbers of the product code, which must be 24 characters, BUT... I have only 19 Alpha-numeric numbers.
I've been hitting my head against the wall trying to figure out how to install my product, but without the right amount of numbers, I can not INSTALL my Photoshop Elements.
If anyone has any ideas they would be greatly appreciated!
Thank you
Lori Nicolls
Please visit: https://helpx.adobe.com/x-productkb/global/student-teacher-serial-product-code.html
I hope this helps.
Concerning
Megha Rawat
-
Hello
After the upgrade to a guest of 14.04 to 14.10 Ubuntu, I tried to reinstall the VMWare tools. The problems I've come across so far:
Shared folder code will not compile. I get the following result:
do: enter the directory "/ tmp/modconfig-ElOCTG/vmhgfs-only.
Using the kernel build system.
/ usr/bin/make /lib/modules/3.16.0-23-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \
MODULEBUILDDIR = modules
make [1]: Entering directory ' / usr/src/linux-headers-3.16.0-23-generic'
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/message.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/dir.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/request.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/cpName.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/rpcout.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/stubs.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/link.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/transport.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/module.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/file.o
CC [M] /tmp/modconfig-ElOCTG/vmhgfs-only/super.o
/tmp/modconfig-ElOCTG/vmhgfs-only/file.c: in function 'HgfsAioRead ':
/tmp/modconfig-ElOCTG/vmhgfs-only/file.c:714:4: error: implicit declaration of function 'generic_file_aio_read' [-Werror-implicit-function-declaration =]
result = generic_file_aio_read (iocb, iov, numSegs, offset);
^
/tmp/modconfig-ElOCTG/vmhgfs-only/file.c: in function 'HgfsAioWrite ':
/tmp/modconfig-ElOCTG/vmhgfs-only/file.c:786:4: error: implicit declaration of function 'generic_file_aio_write' [-Werror-implicit-function-declaration =]
result = generic_file_aio_write (iocb, iov, numSegs, offset);
^
Cc1: some warnings are treated as errors
scripts / Makefile.build:257: recipe for target ' / tmp/modconfig-ElOCTG/vmhgfs-only/file.o' failed
make [2]: * [/ tmp/modconfig-ElOCTG/vmhgfs-only/file.o] error 1
make [2]: * waiting unfinished...
Makefile:1345: recipe for target ' _module_/tmp/modconfig ElOCTG/vmhgfs-only' failed
make [1]: * [_module_/tmp/modconfig ElOCTG/vmhgfs-only] error 2
make [1]: leaving directory ' / usr/src/linux-headers-3.16.0-23-generic'
Makefile:120: doesn't have a recipe for target 'vmhgfs.ko '.
make: * [vmhgfs.ko] error 2
make: leaving directory ' / tmp/modconfig-ElOCTG/vmhgfs-only.
The filesystem (vmhgfs module) driver is used only for the shared folder
feature. The rest of the software provided by VMware Tools is designed to work
regardless of this function.
If you want the shared folders feature, you can install the driver of
running vmware-config - tools.pl again after making sure that gcc, binutils, make
and your kernel sources are installed on your computer.
These packages are available on the installation of your distribution CD.
[Press the Enter key to continue]
In addition, the shared clipboard does not work.
I'm under VMWare 7.0.0 on OS X 10.10.
Any help or advice will be greatly appreciated.
Thank youJonathan Morgan
The VMWare Tools included with fusion 7.0.1 solved this problem for me (and without any serious regressions I noticed so far, at least, which is nice but not something I intend on with vmware), so probably the next update of each VMware product should include the updated tools. Don't know how long updates to other products are coming, however. Wonder if there is a separate place to get just the tools to day?
-
my serial code does not work how can I make it work
my serial code does not work how can I make it work thank you
Hello
If you have a creative cloud subscription then you do not require a serial number to activate it, all you need to do is sign with your ID (Email used at purchase) Adobe in creative application Cloud to activate your membership. See,
Connect and disconnect activate Cloud Creative applications
Solve common problems of activation and deactivation of creative cloud.
Activation and deactivation of troubleshooting
Find solutions to activation errors that may occur during the launch of Adobe applications.
I checked with your Adobe Id on the forums that there is no active subscriptions to this topic.
If you have any other Adobe id try please activate the products with that.
Kind regards
Bani
-
My redemption code is not valid even when I copy letter to letter.
I use Windows 8. I did use adobe first elements, simply purchased the store card, ad when I came back to redeem YOUR CODE IS NOT VALID. PLEASE TRY AGAIN.
Yes, I copied each letter and number. And checked. 3 times more.
YES I saw the support page, there is nothing
YES I'm on /getserial
You should contact the vendor who sold you the redemption code and ask them to provide you with one that works correctly.
-
I bought lightroom and need to register my student ID, how do I do that the trial has run out, I have the product code but not the serial number?
If you have purchased a package, then you should have instructions in the box on how to present your credentials. If you have purchased Adobe online, then you should have received instructions in an email. But here is a link that might help you. There is a link under step 2 which will lead you to a place where you can enter the information, I think.
Adobe - Adobe Education Store: proof of academic identification
-
Status code: 404 not found
Hello
I created comprehensive simple REST services. It validates the data and send it in a queue. I added a REST Client Add on to my Mozilla browser. I got the following error when I test the full web services rest via customer remains.
- Status Code: 404 Not Found
- Content-Length: 1164
- Content-Type: text/html; charset=UTF-8
- Date: Mon, 08 Jul 2013 16:22:41 GMT
- X-ORACLE-DMS-ECID: a26c3ae948dcd922:28156ab0:13fbd9dc11f:-8000-00000000000001fc
- X-Powered-By: Servlet/2.5 JSP/2.1
<! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 project / / BY" > ".
< HTML >
< HEAD >
< TITLE > error 404 - not found < /title >
< / HEAD >
< BODY bgcolor = "white" >
< FONT FACE = Helvetica > < BR CLEAR = all >
< TABLE border = 0 cellspacing = 5 > < TR > < TD > < BR CLEAR = all >
< FONT FACE = "Helvetica" COLOR = "black" SIZE = "3" > < H2 > error 404 - not found < / H2 >
< / POLICE > < table > < /TR >
< /table >
< TABLE border = 0 width = 100% cellpadding = 10 > < TR > < TD VALIGN = top WIDTH = 100% BGCOLOR = white > < FONT FACE = "Courier New" > < FONT FACE = "Helvetica" SIZE = "3" > < H3 > of RFC 2068 < i > Hypertext Transfer Protocol - HTTP/1.1 < /i >: < / H3 >
< / POLICE > < FONT FACE = "Helvetica" SIZE = "3" > < H4 > 10.4.5 404 not found < / H4 >
< / POLICE > < P > < FONT FACE = "Courier New" > server has not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. < /p > < p > if the server does not wish to make this information available to the client, the status code 403 (refused) may be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. < / POLICE > < / p >
< / POLICE > < table > < /TR >
< /table >
< / BODY >
Can someone help me. I was struck here
Thank you
Waly
< / HTML >
Problem has been resolved. There is no tric. My suggestion is before going to test any full service remains on the browser, if we test level console sb at least we can trace the error.
This error can occur if your web service has any problem of syntax or validation problem or condition fault so we can get this problem...
Thank you
Waly
-
I was trying just to 'chat' with someone, and they're signing. My CS5 coupon code does not work on my computer - I'm re-entered several times to ensure that there are no errors. It has not been used before. I bought the [Mac] software in 2011 and was able at the time to buy a Mac to install the software on. Does anyone have advice? Or y at - it someone with Adobe that can help?
Contact adobe support, https://helpx.adobe.com/contact.html
Maybe you are looking for
-
Dear all! I hope everyone is doing well! Well! I am a student in first year of Labview and would like an expert on this VI opinion I did. I'm learning by doing! This VI is to see the effects of sampling at different frequency. I have a LABVIEW 8.5 an
-
Hello I would like to know why I get 2,000 appearing in the table instead of 0.000. I am trying to initialize the array to 0. Thank youhiNi.
-
Hi, I have a sony vaio cs series with windows vista home premium 64-bit.
any help is appreciated very much! There is a problem with my laptop screeninside, a line (2-3mm) keeps appearing / reappearing every 2 seconds.the line is a reflection of the top part of my screen.for example, now I have my mozilla open, then the li
-
BlackBerry Q10 connection screen does not appear
I have a Q10 and I can not log on screen to display. When I click on the high background to unlock the screen, the screen came as usual, but in the upper part, the media volume is displayed. When I go to swipe to get the log to the screen the screen
-
Media Center missing completely Windows 7 even after turning on and the features of windows
Media Center Windows 7 even completely missing after switch on and the features of windows. windows edition version 64-bit home premium