Hi, I have a sony vaio cs series with windows vista home premium 64-bit.
any help is appreciated very much!
There is a problem with my laptop screen
inside, a line (2-3mm) keeps appearing / reappearing every 2 seconds.
the line is a reflection of the top part of my screen.
for example, now I have my mozilla open, then the line down flashes the upper part of a mozilla window.
I tried print screen to show the line. but the screenshot won't capture it.
Help, please! It's very distracting... There is a problem with my graphics card?
my laptop isn't even that old (3 months)
Thank you very much for reading!
It is still under warranty. Talk to Sony, it looks like a graphics problem. They will have to replace the motherboard if the graphic chipset is integrated.
Tags: Windows
Similar Questions
-
How can I update the graphic card drivers in sony vaio vpceb45fg laptop Windows 7 Home premium 64-bit runningt?
Hi simran1976,
Use the link below to download and install the video drivers:
http://www.Sony.co.in/support/product/VPCEB45FG#
http://www.Sony.co.in/support/product/VPCEB45FG#
If my post answered your question, please mark it as an "accepted Solution".
-
Can I have a sytem of dual boot with Windows Vista Home Premium and Windows XP Professional?
My laptop came preloaded with Windows Vista Edition Home Premium on the C drive. The drive D partition contains recovery software. I have a partition formatted f with nothing in it. Can I install Windows XP Professional on the partiion F and have a system dual boot? If so, how to load F installation CD when it wants to install in C?
It is the instance of Vista installation.
Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...
If the XP drivers are not available for your model, forget the idea.
http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm
Read the above.
See you soon. Mick Murphy - Microsoft partner
-
I have a HP Pavillion G620012EU laptop with windows 7 Home premium 64-bit
. I had it for two months and restarted several times and it still restarts fine
Recently I didn't let the machine till the day the day and the next, I got the error message "no boot device found". If I look in the event viewer, he said "it was an unexpected stop.
I have service pack with all updates
It restarts so very well
If it is only two months, return it for replacement or repair under warranty. Make sure that you back up your files before sending.
-
my laptop hp dv5 with windows vista home premium series starts do not
my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help
Hello
Power outages often lead to problems of material with computers / laptops.
If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.
If under warranty contact HP.
If this isn't the case, under services, contact a repair shop, local.
See you soon.
-
Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has left a couple of weeks of work. Anyone have an idea how I can get it working again?
Hi Sunday47,
There are many causes of Code 39 errors:
· A required device driver is missing.
· A required binary file is corrupted.
· There is a problem with the file I/O process.
· A driver that refers to an entry point in another binary file cannot load.
I suggest you try the following steps:
Step 1: Run the fixit available in the link below
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060
If the problem persists,
Step 2: Uninstall and reinstall the drivers.1. click on start and then click Control Panel.
2. click on system and Maintenance, click System, and then click Device Manager.
Note If Control Panel is in Classic view, double-click System and then click on Device Manager.
3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
5. When you are prompted to confirm that you want to remove the device, click OK.
6. restart the computer.
After the computer restarts, the drivers will be installed automatically.
Click here for more information.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. \niehter is running thing fixit. How updated?
Hi Vishal,
1. what happens when you try to install Windows Update and the fix, you get any error message or error code?
2 have you made changes on the computer before this problem?
3 is the limited issue during the installation of specific updates?
Problem when installing windows update, see the following Microsoft article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602
Notes:The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
Microsoft safety scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
Keep us informed on the status of the issue.
-
original title: lack of games
I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.I have no games. No solitaire, Minesweeper, no nothing.How can I, without seeking to erase and reinstall again?To activate the built-in Windows 7 games:
1. click on Start (lower-left) and then on Control Panel.
2. click on programs and features.
3. on the left side of the screen, click on 'Windows turn features on or off".
4. find the entry called games & check the box next to it.
5. click on OK.
6 reset.
If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.
-
I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
Can someone help me, please?Hi JohnMcLarnon,
Welcome to the community Microsoft and thanks for posting the question.
According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.
1. what happens when you try to install, summers - get you any error message or error code?
2 is the issue limited only during installation AutoCAD?
3. have you made changes on the computer before this problem?
I suggest you to see the steps in the following Microsoft article and check if it helps.
Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0
Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit
If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit
If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit
Hello
You are unable to update or upgrade Vista 32 bit to 64 bit of Vista.
32-bit to 64-bit, or 64 bit to 32 bit is done by a new installation using a full version of the operating system.
32-bit and 64-bit are different operating systems.
See you soon.
-
I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another? Thanks for any help on this.
Hello
1 did you change on your computer before this problem?
2. when exactly you receive error message?
You can follow the methods and see if it helps.
Method 1
Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
(a) click Start .
(b) in the search box type command prompt.
(c) right-click and select run as administrator of .
(d) type ping 127.0.0.1 and ENTRY.
If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.Method 2
Check to see if the problem exists in safe mode with network.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 3:
Alternatively, you can try to reset TCP/IP and then check if it helps:
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Method 4:
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive.
After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct. I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory). When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029. I have seen posted answers to this. Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.
Hello
The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.
1 start the computer and press the F8 key continuously to get advanced boot menu options.
2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
3. If so, select it and press ENTER.
4. If not, then you should organize a Vista installation disc.You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
http://support.Microsoft.com/kb/950167 -
How can I stop my cursor jumping out of control, I have windows vista home premum pack use a touchscreen Tablet
Hi Mypoppy,
Exactly when this happens to you (using a particular application or game)?
The same thing happens if you use an external mouse?
Contact Toshiba technical support to check if there is no update touch pad software. Follow the link given below to Toshiba support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hi, I have Windows Home Premium 64-bit. I want to create a restore point, but I get a message saying that the system restore has been disabled by the administrator of the political group contact domain administrator. I am connected with an administrator account. I have read forums that give instructions to access the system restore options: file or tabs just do not appear and there are some comments saying that the option does not exist in my version. So how the hell do I create a system restore point in Vista Home Premium?
Quote:
Using the Group Policy Editor
If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in, follow these steps:1. Click Start, type gpedit.msc and press ENTER
2. go to the following branch: Computer Configuration | Administrative templates | System | System Restore
3. double click on disable the Configuration and set it to not configured.
Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
4. exit the Group Policy Editor.If using the Group Policy Editor do not fix the problem, try the registry fix from the following.
Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
Using the registry editor1. Click Start, type regedit.exe and press ENTER
2. navigate to the following key:
HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
3. in the right pane, delete the value named DisableConfig
4. exit the registry editor.Words
See also:
http://www.guidingtech.com/870/system-restore-turned-off-group-policy-error-Windows/
-
The update of window tried to 4 updates. Some were installed some has failed. Here are the ones failed.
Update for Microsoft Office Outlook Junk Email Filter (KB975960)
Update for Microsoft Word 2007 (KB974561)
A security update for the 2007 Microsoft Office System (KB973704)
Update of security for Microsoft Office Excel 2007 (KB973593)Please give advice on how to solve this problem.
Thank you
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
The browser again download the latest applications at the top but it does not download anything.
Firefox rpet "download the latest applications" just above the faucets, but it does not download anything. This has happened Each time Firefox opened == I removed some aps of firefox
-
Equium A60-155 does not work on AC
Laptop works on fully charged battery, but not on sector. Will be not charged battery. Seems the ac power input does not work. I have two identical laptops. Ideas please Zak
-
My habit of Epson print it says the printer is ready, but the document is just to feel that
My printer does not print. I hit print and it enters Quebec and sits there. I had to remove all those who are in Quebec and try to make a new document and nothing happens. I turned off the printer and turned back and nothing
-
HP7510e: HP7510e and Windows 10
Hello I installed my HP7510 on my Windows 10 OS without any problem, but only with basic options. (that is to say I had no access to 'C:\Program HP Photosmart HP Photosmart series.exe 7510 7510 series\Bin\HP' - Start UDCDevicePage etc..) So - I downl
-
Sony DSC-F707 camera is no longer recognized by Windows 8.1
After you have installed Windows 8.1 my camera Sony DSC-F707 is no longer recognized and I can not upload photos, the message says there is a driver problem. Sony said the driver must reside in point 8.1 of Windows, but apparently is not. Any sugge