CODE "NavigationPane.deprecatedPushQmlByString ("QMLFile.qml")' FAIL

Similar Questions

• I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA

  Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009.  This support now will cost $59 us $ (or more) per incident.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to connect the ButtonClick events to NavigationPane.popAndDelete within QML

  Hi all

  I know to connect my click event of the button to NavigationPane.popanddelete in the native SDK,

  I want to implement this feature in QML, how to implement it.

  My struct QML is something like this:

  P

  MyHeader.QML
  
  Container{
     Button{
       objectName:"BackButton"
       onClicked:..//how to write here
     }
  }
  
  MyPage.QML
  
  Container{
     MyHeader{
     }
     Container{
     }
  }
  
  within C++
  
              QmlDocument *qml = QmlDocument::create("MyPage.qml");
              AbstractPane *mypage= qml->createRootNode();
             // Button *button = alertPage->findChild("BackButton");
              //QObject::connect(button,SIGNAL(clicked()),this,SLOT(onPreviousClick()));
             m_pagePane->push(mypage);
  

  Thanks in advance...

  Hello

  I want everything first, make sure that you know about the properties of the component in QML. If you have inserted a page in your navigation pane and want to have a back button seems natural, you can use the following code in your definition of QML Page {}:

  paneProperties: {NavigationPaneProperties}
  ButtonBack: {ActionItem}
  Title: 'Back '.
  onTriggered: {}
  _navPane.pop ();
  }
  }
  }

  This will insert a lower bar filled with a previous button following a consistent style.

  If you want to raise the pop event from the QML document via manual button (no), in the property of your onClicked button, you can simply call pop on the handle of your navigation pane.

  for example
  Button {}
  ID: buttonTest
  objectName: "buttonTest.
  text: "text".
  onClicked: {}
  _navPane.pop ();
  }

  Please note that in both cases, you have exposed the handle of "_navPane" in your C++ code with subsequent calls (assuming that m_SidePaneContentQML is the name of your page with the back button):

  m_SidePaneContentQML = QmlDocument::create().load("SidePane/SidePane.qml");
  m_SidePaneQmlContext = m_SidePaneContentQML-> documentContext();
  m_SidePaneQmlContext-> setContextProperty ("_navPane", m_Nav);

  In this case, m_Nav would be the navigation pane that you use.

  Let me know if you need more information, I'm happy to help you.

  Good luck!

  Martin

• Store a NavigationPane as a QML property

  I have code similar to the following places:

  onTriggered: {
      var chosenItem = dataModel.data(indexPath);
      var detailPage = detailsPageDefinition.createObject();
      detailPage.initDetailsPage(chosenItem);
      // Push the content page to the navigation stack
      main_list_nav.push(detailPage);
  }
  

  detailPage must also push the NavigationPane, but the problem is I have a couple of different NavigationPanes and the detailPage knows not only push you on.

  I want to be able to switch the navigation as the parameter pane to initDetailsPage() i.e.

  detailPage.initDetailsPage(chosenItem, main_list_nav);
  

  But how I declare this as a property? by DetailsPage.qml

  Page {
       property  navigationPaneToUse
  
       function initDetailsPage(item, navPane)
       {
            navigationPaneToUse = navPane
            ...
       }
  }
  

  If not, is there a property QML on a Page that tells it what NavigationPane he pushed to?

  Thanks for all the help guys. Suite suggested Zmey using the idea of the .parent property and generalizing javayoung above, I came up with this method I set on my UI root object, if it's available everywhere.

  It crosses just to the top of the tree of the child until it finds an ancestor with an object name that contains "NavigationPane", then push on that. In this way, that you don't need to store anything.

      function pushToParentNavigation(child, objToPush)
      {
          var cur = child;
          while(cur != null && cur.objectName.indexOf("NavigationPane") == -1)
          {
              cur = cur.parent;
          }
          if(cur.objectName.indexOf("NavigationPane") != -1)
          {
              cur.push(objToPush);
          }
          else
          {
              console.log("No NavigationPane in heirarchy!");
          }
      }
  

  So now I can just do this anywhere:

  // Push the content page to the navigation stack this page belongs to.
  pushToParentNavigation(this_page_id, myUIObject);
  

  This means that you must add objectName: 'NavigationPane' to all your NavigationPane who isn't ideal. If anyone can suggest a better way to do it, it would be great. I looked at JavaScript typeof operator, but it is not powerful enough.

• Error code: 80073712 for the update failed

  Original title: Windows update problem.

  After trying to install the updates for my windows vista, whenever it says update failed with error code 80073712, when looking in it, he says the windows component store is damaged, how can I fix this plse. I would be very gratefull if someone could help me with this please, I'm not very good with computers and do not want to do something wrong with it.

  Hello

  S ' it works well before?

  -Did you make any changes before this problem?

  Method 1: I suggest you to consult the Knowledge Base article and check if it helps:
  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" http://support.microsoft.com/kb/957310

  Note: When you perform a repair in accordance with method 3 installation in the article, this restores the current installation of Windows Vista in the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  Method 2: I suggest scanning of auditor of system (CFS) files on your computer and see if it helps fix the problem.

  Check out the link for more details below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• Windows Update error Code 663 (kb951847) x 86 fails to install

  I tried to run windows update for .net framework 3.5 SP1 (kb951847) x 86, but it fails with error code 663. I ran several updates with some failure, but now there are 2 that fail to load. the other is .net framework 1.1 SP1 KB953297 x 86 this error code is 643.

  I rebooted between each attempt, and after 3 attempts and reboots, I have no idea how to fix this. Research knowledge base have not highlighted no response, but I'm sure that this has been resolved, and I just probably did not use the correct criteria search.

  Help please.
  Harry

  http://support.Microsoft.com/default.aspx/KB/923100/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Get Code 80070641 KB2596785 installation, installation fails - any solution

  Get Code 80070641 installation KB2596785 "Security update for Microsoft Office 2007 suites", installation fails - any solution

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run Windows Update to convenience store and check if it helps.

  Open the Windows Update troubleshooting tool:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  How to fix problems connecting to Windows Update or Microsoft Update:

  http://support.Microsoft.com/kb/818018

  For more information, see the following Microsoft article.

  http://support.Microsoft.com/kb/304498

  Hope the information is useful.

• Error code 8007671C Cumulative security update fails to install

  For IE8 Cumulative security update fails to settle whenever we're trying. 8007671 C error code.

  Hello

  1. do you have security software installed on the computer?

  Method 1: Try to set up your computer in a clean boot state, then try to install the cumulative security update and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• HP Officejet Pro e-all-in-8610: HP Officejet Pro 8610 - error Code: "0xc19a0013" (printhead missing or failed)

  I bought the printer (e-all-in-one printer HP Officejet Pro 8610) in January 2015.  The printer was working properly - fax, copy and scan, until two days ago.  Now, it doesn't print at all.  Received an error code: "0xc19a0013" (missing or does not have the print head).  An expanded version of the error code reads: "the print head seems to be missing, not detected, or incorrectly installed.  Error: 0xc19a0013.   The printer uses a removable printhead, HP Ink cartridges (black) 950 and 951 (cmy).  I used the diagnosis of HP support recommendations: all software and firmware for this printer is installed. HP ink cartridges are not low or empty; remove the printhead ink cartridges and reinstall them.

  There are several steps in the recommendation of troubleshooting, but I stopped to lift the printhead.  Because of my technical inexperience, and there were too many ceveats (attention, attention, proper relocation and etc..)  with the removal of the print head which could cause problems more serious.  Then, I stopped to remove and clean the print head.  Also, used the doctor to Scan printer HP for assistance. Tool to clean the printhead does not.   What worries me most with the 0xc19a0013 error code is his explanation: the print head seems to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is happening with the error code that I received and the resolution of the printer malfunction.

  Contact HP technical support at the 800-474-6836 for more options.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Language-country selector.

• What can be done to solve the error code 000641; all windows updates fail

  I get the error code 641 trying to update the 17 items that need to be addressed. I tried several times and the same error message. Updates are marked as critical. Demand appears in my bar for letting me know that I've updated to install tasks.

  Hello

  You did changes to the computer before the show?

  Method 1: Run the fix - it of the article mentioned below:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  How to resolve problems connecting to Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/818018/

  Method 3: Put the computer in a clean boot state, and then try to install the updates and see if that helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 4: Temporarily disable UAC and see if that helps.

  Reference:

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Important:

  User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

• Start getting script error code 0/line48/tank 2 / failed to get the value of the application object of property is null or undefined

  whenever I start all the applications I get three error code of script, I was wondering how to stop this.

  Check if the following will help with your question.
  Open your Internet Explorer browser.
  Click on the menu 'tools '.
  Click on 'Internet Options '.
  Click on the "Advanced" tab
  Check the checkbox "disable the script debugger. It is located under the heading "Navigation".
  Uncheck the "display a notification of every script error".
  Click 'Apply' then 'OK '.
  Close Internet Explorer.
  Open Internet Explorer to make sure that the script errors are not displayed.

  Please reply back and let us know if this can help.

  Marilyn

• 8024A 00 error code that Windows Update has failed

  Hi I have wndows 8 on my Samsung 350w

  but my windows giving the 8024A 00 code error please help me

  0x8024A000

  WU_E_AU_ NOSERVICE

  To THE put incoming calls to THE service.

  https://TechNet.Microsoft.com/en-us/library/cc720432%28WS.10%29.aspx?f=255&MSPPError=-2147217396

  Advice of an Internet connectivity issue.

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

  
  

• I can not install an update error code 646 (KB976321), he keeps failing.

  I tried everything suggested my screen help and without success.  Help, please...

  And, once again: Please read the information in the Windows Update forum before posting.  Thank you!

  It helps if you read the above and provide some context to the question. Alternatively, you can contact MS for assistance since the update in question is a security update. Article for: MS10-031: Description of the update of security for Office system 2007: 11 May 2010

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MowGreen Services update - consumer safety

• deprecatedPushQmlByString() Safe or not

  Hey everybody,

  IM creating the menu for my application system. I hate them cluttering up unique .qml a file using the

  NavigationPane {} with multiple pages.

  I looked at several examples of documentation of cascades and generally so have several .qml files they use:

  NavigationPane.deprecatedPushQmlByString ("QMLFile.qml")

  My question is: are we safe to use this as a solution or should I worry about the of this really be discouraged if a later version? I don't want to get all this finished coding and recoding in a few months, when this function no longer works.

  Thank you

  Bryce

  BryceMcMurter wrote:

  Hey everybody,

  IM creating the menu for my application system. I hate them cluttering up unique .qml a file using the

  NavigationPane {} with multiple pages.

  I looked at several examples of documentation of cascades and generally so have several .qml files they use:

  NavigationPane.deprecatedPushQmlByString ("QMLFile.qml")

  My question is: are we safe to use this as a solution or should I worry about the of this really be discouraged if a later version? I don't want to get all this finished coding and recoding in a few months, when this function no longer works.

  Thank you

  Bryce

  You should definitely fgo away from deprecatedPushQmlByString

  Here's how:

  You must enclose the objects with your NavigationPane

  You can use push (xxx), pop(), and popAndDelete()

  Beta2 has a bug: pop() removes also, so a 2nd push will fail

  I use this completely on my OpenSourceCascadesApp

  hope many 38 questions that I mentioned will be fixed with the beta 3 ;-)

  at the moment, if you test my app and that something works the 1st time it's the pop() bug.

  Just reboot and try another workflow

  BTW, you can vote for my OpenSource Contribution (CommunityAwards)