Code of the Clain

Similar Questions

• send you the code for the new Apple ID and not the old

  Can you please send the code to the new Apple ID that is dead?

  What is the code? What AppleID?

  You will need to provide more information until someone can offer a solution.

  Writing an effective question of communities of Apple Support

• I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  Yes. You may be victim of a scam, except if you are connected to your business with this requirement.

  Change your password immediately below:

  https://appleid.apple.com.

• What is my access code for the software updates

  What is my access code for the software updates?  It seems to be a six-digit numeric code, but I have no recollection of anyone establishing.

  Take a look at this thread, what is the password for software update

• I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TV says wrong user

  I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TVsaybadusername password or.

  Your ATV1 has an old software system not updated for years.  You have 2 factor (6 digits) or authorization of step 2 (4 digits) enabled for your Apple account.  Here are the characteristics of the latter.  I disable these on your Apple account and try again.

  For Apple ID - Apple Support two-factor authentication

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• (I am in China and on the front is partly in Chinese.) I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears.

  Dear Firefox support, I am in China, and the first page of my Firefox screen is partly in Chinese. I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears. I downloaded a new version 5, but the mandarin (and the associated statement bar) still come in Mandarin. How can I download a really English version?

  You can choose your language installation of this list: http://www.mozilla.com/firefox/all.html

• Codes on the recovery disks

  Hello

  Where I work, we have a large number (about 30 currently, but constantly increasing) of the Satellite Pro A100s and A200s, but we keep all media recovery together. Outside of a few disks for the A100s I marked as such when remove them boxes, none of them have any indication of what model, they are for. I realized also since there are different revisions of each model that seem to have slightly different hardware (for example, I tried to re-imaging an A200 PSAE1E using a recovery for a PSAE4E disc, but this image does not seem to contain the management system for the 1st Bus drivers). I downloaded and installed the correct drivers, but still, it would be useful to know what codes on the discs what revisions of what models.

  The codes are:

  GMR400709EN1 (2007)
  GMR400787EN1 (2007)
  GMR400784EN1 (2007, A100)
  GMR400629EN0 (2006; delivered in a plastic case instead of a sleeve of paper and a key for Microsoft Onenote 2003 on the back)
  GMR400626EN1 (2006; delivered in a plastic case instead of a sleeve of paper and a key for Microsoft Onenote 2003 on the back)
  PMR400518EN0 (2006; delivered in a plastic case instead of a sleeve of paper and a key for Microsoft Onenote 2003 on the back)

  Thank you very much

  Ansel.

  Hello Ansel

  I guess you know very well that for the info, someone should have access to the internal database of Toshiba. This is the forum user and chances to get these information are not so big. Before you wait here I recommend you to contact the nearest Toshiba authorized service partner.

  They have access to the database of Toshiba and I'm sure they can help you 100%. I have P200 and number of mine recovery DVDs will not help at all.

  Good luck!

• HP 15-f305ddx: I haveva hp 15-f305dx with an error code and the password of the bios 58495227

  I have a haveva hp 15-f305dx with an error code and the password of the bios 58495227

  Thank you so much, you're the best

• I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

  You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

  copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

• Security settings do not allow execution of script code in the report.xsl stylesheet

  Hello world

  I can't open a file of XML in Excel 2007 results - even if I added the stylesheet for trusted locations and deleted all the protections.

  Here's what happens:

  1. open the XML results file how I am propmpted for select the report.xsl stylesheet TestStand

  

  2. then gives error: Scripts in this XML document and/or references to other documents are disabled.

  

  3. by clicking OK gives more specific information - namely the security settings don't allow execution of code within this stylesheet script:

  

  But I did the following:

  -The path to the sheethas style was added to the "trusted locations".

  -ActiveX settings are completely enabled for all controls without restrictions

  -Macros settings are enabled for all macros

  -Is trust access to the VBA project object model

  -All data connections are allowed

  How can I activate the execution of script code in the style sheet for the file XML can load?

  Thank you

  Ronnie

  Ronnie-

  Directly from the Article in the Microsoft Knowledge base, please note that do the following changes "may make your computer or your network more vulnerable to attack by malicious software such as viruses." It's always a good idea to make a backup of your registry before editing. This can be done by clicking on file' export.

  In any case, as the article explains, open the registry and navigate to HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Security. The security file must contain a registry key called XSLSecurityLevel. Mine did not have this registry key and I had to create it (see screenshot below). Double-click the XSLSecurityLevel registry key, type 1 in the data value, and then click OK.

  You should now be able to view the XML from Excel 2007 report. To reset this setting, simply double-click the registry XSLSecurityLevel key, enter 0 in the given value, and then click OK.

  

  I hope this helps!

• FPGA code with the evolution of the modules

  I need to create FPGA code to a cRIO-9072 facing the development of the modules.

  My cRIO will have a number any NI 9203 (analog acquisition) and modules OR 9411 (acquisition digital) as inserted by the operator. When turning the power on, the system must identify two possible modules were inserted in each of the slots. Subsequently, he will then know what choices of code to call to acquire data from the individual modules.

  I found the article in the knowledge base for CRY that queries each module and again reports the type of module and I can use it to successfully detect modules, but what LabVIEW fails to allow me to do this is to compile my FPGA code that was designed to deal with possible modules. After compiling, I get the error: "IO found point FPGA project. You must add the I/O item in the Project Explorer window, or select a different element in the control of FPGA of IO or the constant"because the compiler requires the appropriate modules are configured in the LabVIEW project. Unfortunately, this would require two different modules to be configured for each slot at the same time as there are sections of code for the 9203 modules and sections for 9411 modules for all eight locations coexist in a vi.

  Anyone have any ideas on how to get LabVIEW to compile my FPGA code somehow?

  Many thanks in advance,

  With the current draft of LabVIEW FPGA, you cannot compile a LabVIEW FPGA VI which manages several configurations of C Series modules.

  For your application, you must create a target of your project for each of the possible configurations of module and build the corresponding FPGA VI. Then, compile each of the screws to create the necessary for each configuration FPGA bitstream. Then in your host VI, you can detect what the current configuration of the module and download the binary stream appropriate for the FPGA. Another issue to consider is that the reference to the FPGA VI/bitstream returned by the open FPGA VI reference function will be unique to each bitstream/module configuration. So in your host VI, you'll need treat each configuration of the module with a separate set of code by contacting the FPGA.

  If you consider only two different modules and an eight slot chassis, there are 9 modules possible combinations. The condition would be to the end user to place all modules of the same type together, either from the left or the right side of the chassis.

• Run code on the host target RT and FPGA

  Hi all

  I'm sorry if I ask a question to repeat. I searched for this a bit and couldn't find a solution.

  I'm trying to run a single VI (be it on RT compactRIO or on the connected host PC) and enforce the code on the host PC and target the FPGA code RT. I currently code that runs on the host PC computer that opens the FPGA reference and executes code FPGA, but I don't know how to do this with a VI on the target of RT. Any advice/help would be great. Thank you!

  Brandon

  You are not far from your goal. But you need to at least

  1. Update FPGA code (Bitfile) containing your code to run on the FPGA.
  2. An executable compiled for your goal of RT, which is set to autostart.
     You can use the code from my first post as a starting point. Compile, deploy and set it to autostart on your target of RT.
  3. An executable compiled for the host machine. that your user will begin.
     You can use the code in my first post, maybe load IP address, Port etc. of the Ini file settings.

  If you double-click on the exe file on your host computer it will open an application reference to your target computer of RT and call the VI on the target machine. This is how you run code on your RT. From this RT code you can download and run the FPGA (bitfile) to your FPGA code or control which is already running the FPGA by controlling a state machine code. Load more screws to your memory of RT targets and call them from your host to add more functionality if you need to.

• error code 1722: the RPC server is unavailable. (I can't print documents)

  Hello

  I can't print my documents, I have message from UN code error 1722 the RPC server is unavailable
  I started solving the problems on my printer, Windows did not find problem.
  I bought a software to repair Windows (Regenie), I was able to print during the morning, and the afternoon impossible.
  I restarted the Regenie software, I restarted my PC, and always impossible to print documents, with the same error error code 1722 the RPC server is unavailable
  I don't know what to do, thanks for your help
  Thanks for your replies
  Good to you

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• RegOptimizer; have reloaded Microsoft Fix Center after trying to uninstall product no. RegOptimizer Code on the computer?

  \\\have reloaded Microsoft Fix Center after trying to uninstall product no. RegOptimizer Code on the computer?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

  Please download and install Malwarebytes Anti-malware (free version) - uncheck "Activate the free trial version of MBAM PRO" at the end of installation - www.malwarebytes.org and update to update, then run a complete analysis of your main account and quick scans in all other user accounts.

  Remove what it finds

• What is the hex code of the modern green color used on the cover of the Microsoft Manual of Style?

  What is the hex code of the modern green color used on the cover of the Microsoft Manual of Style, 4th edition?

  original title: Going Green...

  Hello

  The question you posted would be much better adapted to:

  http://social.msdn.Microsoft.com/forums/en-us/categories