Code signing error

Similar Questions

• Lost the ability to create tokens of debugging: error: Code signing request has failed because the value debug token of Type Package is not allowed.

  I have been a token of debugging and apps on my device Z10 hundreds of times from the command line and Momentics but this time I am confused.

  I am trying to create a token of debugging (in command line and Momentics) and deploy it in my Z10 camera, but it does not work.   In both cases, I get the following error.

  "Error: Code signing request has failed because the value debug token of Type Package is not allowed."

  2 things have happened recently that make this potentially different situation.

  a.) now my device is currently running OS 10.2

  (b) there was something new regarding signing apps with your blackberry ID?

  I was a little out of the loop for 1-2 months so please forgive me if this problem is very obvious... I am looking for a clue to what I'm doing wrong.

  This has been fixed on both of your accounts.  It was a problem of account setup.  We're looking at what caused it to prevent it from happening in the future.

• Unable to connect BAR file "error: Code signing request failed because it cannot be recorded.»

  Hello

  I'm trying to sign the BAR file generated from the apk files, but I got this error:

  Error: Code signing request has failed because it cannot be recorded. Package-Version-Id [gYACgLU-GLg8YtNMuWU17-BoxsM], [gYAEgM4XsG9ppojbj3zOO9gg-Nc], Id [2189468] Client Application-Version-Id.

  I tried to redownlowd the file CSK again and again, did a lot of things but not luck.

  Thank you for sending via manifest file.  The error is caused by the name of the application you are using.  There is a limitation of the number of characters that can be used for an application name.  The number of characters will vary according to the type of encoding used, in this case it would be 7.

  The workaround for this solution, use our tool is to define an application name by default using Latin based on characters and then add names localized for each supported language.  These localized names do not have this limit.  For comparison, here's how it's done using BlackBerry Momentics: How to define an Application as the characters name Unicode requires the default name would only be used if a localized name is not available for the language of the user.

  Android also supports localized names of applications, so the similar process should work there too.

• Problem with WebInspector: error: Code signing request failed car-development-Application Mode in the East of the demo is present and is not set [false].

  Hi, I have a problem running the webinspector on my dev alpha.

  Whenever I have create bar folder with the d flag, and then run the signature tool, I got the error message:

  Error: Code signing of the petition failed because Application-Development-Mode demo
  is is present and not set [false].

  How to solve this problem? If I generate the .bar without the flag - d, can I sign and execute on the device, but without web Inspector

  I found the error

  I just had to use the indicator g in bbwp and set my password

  and not reuse bbwp and then the signing tool

• Error = the Code signing request failed

  I'm trying to sign my application of webbworks for the playbook, but I cannot, here is the process of me, packaging and then try to sign. I can install non signed bar file fine but I can't seem to sign.

  "/ Users/mike/projects/blackberry playbook sdk/bbwp/bbwp" $build_folder "/ build.zip" ""

  [INFO]       Parsing of the command line options

  [INFO]       Bbwp.properties analysis

  [INFO]       Validation of archive WebWorks

  [INFO]       The analysis of config.xml

  [WARNING]    Cannot find an element of

  [INFO]       The application of filling source

  [INFO]       Compiling applications WebWorks

  [INFO]       Packaging of the record bar

  [INFO]       Bar complete packaging

  [INFO]       Packaging applications complete WebWorks

  "/ Users/mike/projects/blackberry playbook sdk/bbwp/blackberry-tablets-sdk/bin/blackberry-sign"-verbose - cskpass pass - keystore "/ users/mike/projects/blackberry playbook sdk/bbwp/bin/sigtool.p12"-storepass pass "$build_folder"/bin/build.bar RDK.

  TBS = developer certificate

  30 81 a0 c5 03 02 01 02 02 04 4 a3 82 99 30 0c d

  > barsigner error: Server error: Code signing request failed because this file was previously signed.

  This can be caused by trying to sign the same version of the application.  Try incrementing the value of the version property in your config.xml file (or use the command line parameter - buildId) and sign again.

• Server error: Code signing request failed because this file was previously signed.

  Hello

  We strive to sign a new change in app.

  The zip of the app was rebuilt, but when us compile and sign it returns this error message:

  "C:\Program Files (x 86) \Research Motion\BlackBerry Development Kit SDK for Tablet 2.0.0.4\bbwp\bbwp.exe WebWorks ' C:\Users\Albert\workspace\app\build\app.zip - gcsk gp12 XXXXXXX XXXXXXX - buildId 10

  [INFO]                  Parsing of the command line options
  [INFO]                  Bbwp.properties analysis
  [INFO]                  Validation of archive WebWorks
  [INFO]                  The analysis of config.xml
  [INFO]                  The application of filling source
  [INFO]                  Compiling applications WebWorks
  [INFO]                  Packaging of the record bar
  [INFO]                  Bar complete packaging
  [INFO]                  Start signing tool
  barsigner error: Server error: Code signing request has failed because the file has
  been previously signed.
  [INFO]                  Full signature
  [INFO]                  Packaging applications complete WebWorks

  What is going on?

  Thank you

  Sorry, resolved:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/error-signing-PlayBook-app-code-...

  http://docs.BlackBerry.com/en/developers/deliverables/23959/Signing_your_application_1422721_11.jsp

• ADT error with comodo code signing certificate

  Hello

  I am signing an AIR application with a Comodo code signing certificate.

  SHA-256 with RSA encryption

  -Java 1.8 (same problem with 1.6)

  -AIR 15 (same problem with older versions)

  My order:
  
  

  java -jar -Xmx1024m /data/sdk/AIRSDK_Compiler15/lib/adt.jar  -sign -storetype pkcs12 -storepass ******* -keystore cert/air-distrib.p12 bin-release/TestCert.airi bin-release/TestCert.air
  

  I get the following error:

  Exception in thread "main" java.lang.OutOfMemoryError: Java heap space
      at java.util.Arrays.copyOf(Arrays.java:3181)
      at java.util.ArrayList.grow(ArrayList.java:261)
      at java.util.ArrayList.ensureExplicitCapacity(ArrayList.java:235)
      at java.util.ArrayList.ensureCapacityInternal(ArrayList.java:227)
      at java.util.ArrayList.add(ArrayList.java:458)
      at sun.security.pkcs12.PKCS12KeyStore.engineLoad(PKCS12KeyStore.java:2026)
      at java.security.KeyStore.load(KeyStore.java:1433)
      at com.adobe.ucf.UCF.processSigningOptions(UCF.java:313)
      at com.adobe.ucf.UCF.parseSigningOptions(UCF.java:298)
      at com.adobe.air.ADT.parseSign(ADT.java:1589)
      at com.adobe.air.ADT.parseArgsAndGo(ADT.java:598)
      at com.adobe.air.ADT.run(ADT.java:435)
      at com.adobe.air.ADT.main(ADT.java:485)
  

  When I increase java memory to 8 GB, java uses 6 GB and do not stop... (nothing after 20 minutes...)

  Any idea?

  Problem of ADT or cert? Others?

  THX.

  Jonas

  Yes!
  The certificate was generated in firefox...
  Import it in IE and regenerate the certificate solved the problem

  Jonas

• LabVIEW code 3 error: could not load façade.

  Hello

  I was the second time the "LabVIEW code 3 error: could not load before sign.» When you use the development of LabVIEW 2009 SP1 environment.

  It's really annoying that I waste time as I have to go back to previously saved code.

  Does anyone know where it comes from and how to avoid it?

  Thank you

  Pawel

  Pawel,

  If the façade is damaged, there is little that we can really do about it. So the best thing is to make sure that the front will never get corrupted at all.

  You can write a small VI using VI Server to check the position of the element in your VI. If there is way to positions of reposition before saving the VI.

  Another reason could be much, duplication of controls (including the faulty XControls?)...

  hope this helps,

  Norbert

• problem on mac code signing

  Currently, I just have a problem concerning the signing of the app using webworks api for playbook.

  In particular, I already could package it in a bar in the file but just cannot sign.

  I followed all the instructions to

  1. http://docs.blackberry.com/en/developers/deliverables/23977/Configure_signing_for_tablet_application...

  2. http://docs.blackberry.com/en/developers/deliverables/23977/Sign_the_cod_file_for_a_BB_Widget_applic...

  And it seemed that I have successfully registered my account because I have the following message in my mailbox:

  An application for registration is completed successfully for the customer "xxx".  The client left or code xxx signing requests.

  The customer has returned the following message is displayed:

  Customer "xxx" registered successfully with the server ID RDK signature and now attempts remaining xxx code signing.

  Then when I run the command:. / bbwp ~/Dropbox/Interceptr.zip /gcsk /gp12 123456 123456 /buildId 1/o/Users/xxx/Desktop (I replaced my real pass in this email with string 123456)

  I had the rest of the console message:

  [INFO]       Parsing of the command line options

  [INFO]       Bbwp.properties analysis

  [INFO]       Validation of archive WebWorks

  [INFO]       The analysis of config.xml

  [WARNING]   Cannot find an element of

  [INFO]       The application of filling source

  [INFO]       Compiling applications WebWorks

  [INFO]       Packaging of the record bar

  [INFO]       Bar complete packaging

  [INFO]       Start signing tool

  error barsigner: developer certificate and private key not found in the keys file or store the password not supplied

  [ERROR]     Signature failed

  and using blackberry-signatory gives the same result:

  . / blackberry-sign-verbose - cskpass 123456 - keystore sigtool.p12 - storepass 123456 ~/Desktop/Interceptr.bar RDK

  error barsigner: developer certificate and private key not found in the keys file or store the password not supplied

  I wonder if anyone has any ideas on this subject?

  Here are the exact steps I followed. I tried twice and havn't seen the questions either WinXP or Win7

  updating PATH env variable to add all the paths to the tools

• Page of code signing does not work

  The steps:

  (1) open the URL with IE 8: https://www.blackberry.com/SignedKeys/nfc-form.html

  (2) select "I wish a device Code signing key.

  (3) fill in all information

  4) click the button 'send '. The demand is not there and get an error "Please ensure that all required fields are filled."

  Does anyone have a solution for this?

• Reuse of code signing on more than one computer keys

  Hello

  I'm moving my code signing keys to a machine with JDE 4.2.1 to another computer running JDE 4.1.0.

  Is this possible?  I copied my files sigtool.csk and sigtool.db.  But, when I try to sign a .cod file, it gives me an error of password - and I know that the password is correct.

  Of course, I could generate a new key pair and pay $20 to get signature for her keys, but I should be able to copy my keys autour, right?

  Someone else has been able to copy successfully their signature on another key machine?  I need to downgrade from JDE 4.2.1 to 4.1.0 - keys are not backward compatible through JDE versions and their corresponding SignatureTool.jar?

  Help, please!  :-)

  Using signature on several PC keys is not supported.  If you want to move your signing keys from one PC to another, you can contact [email protected] who can send you a set of replacement of csi files, that you can install on the new PC.  Note that this process invalidates your keys.

• Cannot find the file .csi for code signing

  I'm new to the development for a Blackberry. I get the following error message when you try to build an application that uses a persistent store.

  WARNING! : reference to the class: net.rim.device.api.system.PersistentObject requires the signature with the key: RIM API implementation

  I found that I'm supposed to have a .csi file from when I registered with the area of the developer, but I'm not. Can I request a new one or what?

  Thank you

  Jason

  You can buy rim, code signing certificates.

  The process details are here: http://na.blackberry.com/eng/developers/javaappdev/codekeys.jsp

  Form of payment etc. is here: https://www.blackberry.com/SignedKeys/

  Once you have paid and submitted your application, it takes a few weeks to receive the keys. If you use eclipse, you can then install the keys in your IDE.

• How to record the code signing keys

  Hi I'm luis

  I'm trying to register, but I got an error

  In Eclipse the BlackBerry SDK tools Carpet > Bar signatory.

  does not appear.

  I use the eclipse plugin

  Thank you.

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/BlackBerry-applications-and-code-SIGNI...

  Please click on solved if it helps.

  Thank you

• Distribution of Code Signing and OTA

  I'm developing an application that uses APIs that require code signing. I received my key, installed and used the tool in the code signing eclipse plugin to sign my application.  I can install the application via the desktop tools and I normally see a prompt "Do you want to grant the status of trusted application xxx" when I run the application.  Everything is fine after that.  Now the question I want to distribute the application on the web within my company.  I have other applications are implemented in this way, for distribution to work, but when I run the application, I get the error "xxx uses a secure API", indicating that it has not been code signed.  I copy my files .cod files .jad, etc. on the server of web/results expected / / in my eclipse solution.  The web, do not exit is signed?  Is there a way to force the eclipse plugin to sign the web output or you can do it manually?  Any other reason, it would not work?

  It turns out that our Web server was actually used older versions of files that were not properly signed.  We were storing the .cod files in a database and someone wrote the wrong application, basically.

• RIM Web site won't let me download the code signing key

  I had to move to a new computer.  Won't spend my old code key signature RIM, and RIM will not respond to requests to replace.  I'm paying $20 and get new code signing keys.  Whenever I have the form with credit card information, it goes to a screen of error (internal error) and told me to try again in a few minutes.  (After that it clears the form data)

  It is futile to try again.  The site is broken.  I have a request signed on App World I would like to update.

  Any ideas?  Any developer support phone numbers that work?

  Thank you

  Gerry

  [email protected] is usually fast enough.

  You can also try another browser, I had problems with opera and finally with firefox.

  usually, you should be able to copy all the sigtool.* files to your new PC