Code to add capabilities to the graphics user editing Site
I am creating a site that allows users to edit my graphics by replacing the photo or changing the text of some but not all in the graphics and then allows them to register the new graphics published on their PC. They will not change the site. I love graphic design, but I'm not a coding specialist. Any guidance or code that you could provide would be very helpful. Thank you.
Adobe has Aviary: Aviary
Aviary SDK | Documentation for the Web
Tags: Dreamweaver
Similar Questions
-
Code to add to display the results I need please take a look
Help, please
Here is my code:
and here are some of my outputs / results:SELECT l.location_no, l.zone_code, la.area_code, DECODE (la.area_code, 'WA-60', 'NODA', 'WA-61', 'NODA', 'WA-62', 'NODA', 'WA-63', 'NODA', 'WA-64', 'NODA', 'WA-65', 'NODA', 'WA-66', 'NODA', 'WA-67', 'NODA', 'WA-68', 'NODA', 'WA-69', 'NODA', 'WA-70', 'NODA', 'WA-71', 'NODA', 'WA-72', 'NODA', 'WA-73', 'NODA', 'WA-74', 'NODA', 'WA-74', 'NODA', 'WA-75', 'NODA', 'WA-76', 'NODA', 'WA-77', 'NODA', 'WA-78', 'NODA', 'WA-79', 'NODA', 'WA-80', 'NODA', 'WA-81', 'NODA', 'WA-82', 'NODA', 'WA-83', 'NODA', 'WA-84', 'NODA', 'WA-REED', 'NODA', 'WA-R2', 'NODA', 'WA-R1', 'NODA', 'WA-BIN', 'NODA', 'PA-CDK', 'NODA', 'WA-PALLET', 'NODA', 'WA-BINRESV', 'NODA', 'DA-REPL', 'GOOD') DAREPL FROM MOVE.LOCATION L, MOVE.LOCATION_AREA LA WHERE l.location_no = la.location_no AND l.zone_code NOT IN ('Z-BINRES', 'Z-LARGE', 'Z-SMALL', 'Z-HVYOVR', 'Z-ENDCAP', 'Z-LOOSE', 'Z-BRKPAK', 'Z-STRLINE', 'Z-FLAT', 'Z-BULKRES', 'Z-GENERAL', 'Z-2PC', 'Z-BULK', 'Z-SSP', 'Z-RUG', 'Z-LOAD', 'Z-SSPBRK', 'Z-HOLD', 'Z-REC-SSP' ) AND la.area_code NOT IN ('DA-BULK', 'DA-CANREPL', 'WA-TIER', 'WA-OVRFLOW', 'WA-PALLET2', 'WA-SPRING', 'WA-TIER2', 'WA-DOKPIK', 'WA-DP', 'WA-HOLD', 'PA-OSDHOLD', 'PA-REED', 'RA-REC-CDK', 'WA-PALLET2', 'RECEIVING', 'RECEIVING2', 'WA-BINHOT', 'WA-CANDLE', 'WA-REED', 'WA-BIN2', 'WA-BINCOLD', 'PA-CDK', 'PA-HAZMAT', 'PA-HWR', 'PA-XMASCP', 'WA-PALLET', 'WA-BINRESV', 'WA-BIN', 'WA-BULK', 'WA-BRKPAK', 'PA-BRKPRES', 'PA-CANDLES', 'PA-BIN', 'PA-LOOSE', 'PA-HVYOVR', 'PA-BULKRES', 'PA-BRKPAK', 'WA-01', 'WA-02', 'WA-03', 'WA-04', 'WA-05', 'WA-06', 'WA-07', 'WA-08', 'WA-09', 'WA-10', 'WA-11', 'WA-12', 'WA-13', 'WA-14', 'WA-15', 'WA-16', 'WA-17', 'WA-18', 'WA-19', 'WA-20', 'WA-21', 'WA-22', 'WA-23', 'WA-24', 'WA-25', 'WA-26', 'WA-27', 'WA-28', 'WA-29', 'WA-30', 'WA-31', 'WA-32', 'WA-33', 'WA-34', 'WA-35', 'WA-36', 'WA-37', 'WA-60', 'WA-61', 'WA-62', 'WA-63', 'WA-64', 'WA-65', 'WA-66', 'WA-67', 'WA-68', 'WA-69', 'WA-70', 'WA-71', 'WA-72', 'WA-73', 'WA-74', 'WA-75', 'WA-76', 'WA-77', 'WA-78', 'WA-79', 'WA-80', 'WA-81', 'WA-82', 'WA-83', 'WA-84', 'WA-R1', 'WA-R2') ORDER BY 1
As you can see the first results for 60-02 there are 4 results, which means they all have the DA-REPL AREA_CODE column:LOCATION_NO ZONE_CODE AREA_CODE DAREPL -------------------- ---------- ---------- -------------------------------- 60-02-101 Z-BIN DA-REPL GOOD 60-02-102 Z-BIN DA-REPL GOOD 60-02-201 Z-BIN DA-REPL GOOD 60-02-202 Z-BIN DA-REPL GOOD 60-04-101 Z-BIN DA-REPL GOOD 60-04-102 Z-BIN DA-REPL GOOD 60-04-201 Z-BIN DA-REPL GOOD 60-06-101 Z-BIN DA-REPL GOOD 60-06-201 Z-BIN DA-REPL GOOD 60-06-202 Z-BIN DA-REPL GOOD 60-08-101 Z-BIN DA-REPL GOOD 60-08-201 Z-BIN DA-REPL GOOD 60-08-202 Z-BIN DA-REPL GOOD 60-10-201 Z-BIN DA-REPL GOOD 60-10-202 Z-BIN DA-REPL GOOD 60-12-102 Z-BIN DA-REPL GOOD 60-12-202 Z-BIN DA-REPL GOOD
02-60-101
02-60-102
02-60-201
02-60-202
As you can see with results for 60-04(results 5, 6, and 7) there are only 3 places with DA-REPL in AREA_CODE column. 60 04-202 has a DA-REPL in the column AREA_CODE, and that is the real result, that I'm looking. Short to manually search through 2-5 000 results and manually find results with less than 4 is there any code I can add to help here?
60. 04-101
60. 04-102
60. 04-201
I already tried a much simpler as code THE. AREA_CODE! = DA-REPL, but as you can see above there are so THE > AREA_CODE of to take care of each who has several so although I rul is just one gives me this site with another THE. AREA_CODEHello
As I said before:
You can replace the part in brackets after the "with your_query" with your query
Therefore, this:
with your_query as ( select '60-02-101' location_no, 'Z-BIN' zone_code, 'DA-REPL' area_code, 'GOOD' darepl from dual union all select '60-02-102', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-02-201', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-02-202', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-04-101', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-04-102', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-04-201', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-06-101', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-06-201', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-06-202', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-08-101', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-08-201', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-08-202', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-10-201', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-10-202', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-12-102', 'Z-BIN', 'DA-REPL', 'GOOD' from dual union all select '60-12-202', 'Z-BIN', 'DA-REPL', 'GOOD' from dual ) ,pos_loc_no as (select '101' pos_loc_no from dual union all select '102' pos_loc_no from dual union all select '201' pos_loc_no from dual union all select '202' pos_loc_no from dual ) ,group_with_missing_loc_no as (select substr(location_no,1,5) loc_no from your_query group by substr(location_no,1,5) having count(*) < 4 --order by -- substr(location_no,1,5) ) select a.loc_no || '-' || b.pos_loc_no LOCATION_NO ,'Z-BIN' ZONE_CODE ,'DA-REPL' AREA_CODE ,'MISSING' DAREPL from group_with_missing_loc_no a ,pos_loc_no b where not exists (select * from your_query where location_no = a.loc_no || '-' || b.pos_loc_no ) order by 1 ;
Becomes this:
with your_query as ( SELECT l.location_no, l.zone_code, la.area_code, DECODE (la.area_code, 'WA-60', 'NODA', 'WA-61', 'NODA', 'WA-62', 'NODA', 'WA-63', 'NODA', 'WA-64', 'NODA', 'WA-65', 'NODA', 'WA-66', 'NODA', 'WA-67', 'NODA', 'WA-68', 'NODA', 'WA-69', 'NODA', 'WA-70', 'NODA', 'WA-71', 'NODA', 'WA-72', 'NODA', 'WA-73', 'NODA', 'WA-74', 'NODA', 'WA-74', 'NODA', 'WA-75', 'NODA', 'WA-76', 'NODA', 'WA-77', 'NODA', 'WA-78', 'NODA', 'WA-79', 'NODA', 'WA-80', 'NODA', 'WA-81', 'NODA', 'WA-82', 'NODA', 'WA-83', 'NODA', 'WA-84', 'NODA', 'WA-REED', 'NODA', 'WA-R2', 'NODA', 'WA-R1', 'NODA', 'WA-BIN', 'NODA', 'PA-CDK', 'NODA', 'WA-PALLET', 'NODA', 'WA-BINRESV', 'NODA', 'DA-REPL', 'GOOD') DAREPL FROM MOVE.LOCATION L, MOVE.LOCATION_AREA LA WHERE l.location_no = la.location_no AND l.zone_code NOT IN ('Z-BINRES', 'Z-LARGE', 'Z-SMALL', 'Z-HVYOVR', 'Z-ENDCAP', 'Z-LOOSE', 'Z-BRKPAK', 'Z-STRLINE', 'Z-FLAT', 'Z-BULKRES', 'Z-GENERAL', 'Z-2PC', 'Z-BULK', 'Z-SSP', 'Z-RUG', 'Z-LOAD', 'Z-SSPBRK', 'Z-HOLD', 'Z-REC-SSP' ) AND la.area_code NOT IN ('DA-BULK', 'DA-CANREPL', 'WA-TIER', 'WA-OVRFLOW', 'WA-PALLET2', 'WA-SPRING', 'WA-TIER2', 'WA-DOKPIK', 'WA-DP', 'WA-HOLD', 'PA-OSDHOLD', 'PA-REED', 'RA-REC-CDK', 'WA-PALLET2', 'RECEIVING', 'RECEIVING2', 'WA-BINHOT', 'WA-CANDLE', 'WA-REED', 'WA-BIN2', 'WA-BINCOLD', 'PA-CDK', 'PA-HAZMAT', 'PA-HWR', 'PA-XMASCP', 'WA-PALLET', 'WA-BINRESV', 'WA-BIN', 'WA-BULK', 'WA-BRKPAK', 'PA-BRKPRES', 'PA-CANDLES', 'PA-BIN', 'PA-LOOSE', 'PA-HVYOVR', 'PA-BULKRES', 'PA-BRKPAK', 'WA-01', 'WA-02', 'WA-03', 'WA-04', 'WA-05', 'WA-06', 'WA-07', 'WA-08', 'WA-09', 'WA-10', 'WA-11', 'WA-12', 'WA-13', 'WA-14', 'WA-15', 'WA-16', 'WA-17', 'WA-18', 'WA-19', 'WA-20', 'WA-21', 'WA-22', 'WA-23', 'WA-24', 'WA-25', 'WA-26', 'WA-27', 'WA-28', 'WA-29', 'WA-30', 'WA-31', 'WA-32', 'WA-33', 'WA-34', 'WA-35', 'WA-36', 'WA-37', 'WA-60', 'WA-61', 'WA-62', 'WA-63', 'WA-64', 'WA-65', 'WA-66', 'WA-67', 'WA-68', 'WA-69', 'WA-70', 'WA-71', 'WA-72', 'WA-73', 'WA-74', 'WA-75', 'WA-76', 'WA-77', 'WA-78', 'WA-79', 'WA-80', 'WA-81', 'WA-82', 'WA-83', 'WA-84', 'WA-R1', 'WA-R2') --ORDER BY 1 -- the order by is not needed ) ,pos_loc_no as (select '101' pos_loc_no from dual union all select '102' pos_loc_no from dual union all select '201' pos_loc_no from dual union all select '202' pos_loc_no from dual ) ,group_with_missing_loc_no as (select substr(location_no,1,5) loc_no from your_query group by substr(location_no,1,5) having count(*) < 4 --order by -- substr(location_no,1,5) ) select a.loc_no || '-' || b.pos_loc_no LOCATION_NO ,'Z-BIN' ZONE_CODE ,'DA-REPL' AREA_CODE ,'MISSING' DAREPL from group_with_missing_loc_no a ,pos_loc_no b where not exists (select * from your_query where location_no = a.loc_no || '-' || b.pos_loc_no ) order by 1 ;
Kind regards
Peter
-
Hi, I'm using Vista and Firefox 3.6. I installed some popular addons such as no script and the web page of the trust for the admin account, but when I connect under the standard account with fewer rights, I do not have them available. The only way I can get to run is to right click and run as administrator which defeats the purpose to log on as a standard user. Thanks for any help you can provide.
See:
-
I'm not allowed to modify the source code of my css. I can open a css file
and see all the code but when I try to change the text, it
won't do it. I thought I could edit text to update the css files. How do I do that?If your intention is to download the file changed on the server, then you must use an external editor.
Otherwise, you can watch an extension as a Web Developer.- Web Developer: https://addons.mozilla.org/firefox/addon/web-developer/
-
As the title says I made the mistake of putting different graphics on my website from different areas on my hard drive, is there an easy way to put them all in the same directory? Or I have to do it manually?
Always keep all files in the same folder, very important.
You can move them to the same folder, then right-click and select "link again assets" then find it.
Muse is quite good on discovery than other assets after that, it should automatically find all other assets in the folder you move them too.
otherwise you will have to connect manually, one by one
-
Can I add advertisers of the banner on my site of Muse?
I'm about to start the redesign of my website using Muse, but one thing I can't seem to find out is if he will allow me to put advertisers in style rotating banner on our page. (i.e.. GIF, .png and .jpg, some animated others not. Need to control links and rates of rotation). We use the industry standard sizes: 728px x 90px & 300px X 250px ads.
[link removed by moderator - promotion is not allowed on this site]
Thank you!
You can use a widget Slideshow at the end and remove the default options for 'Parts' in the slide show options. Then resize the image of hero you want. You can configure the speed of Transition from the auto play slide show to your liking.
Thank you
Vinayak
-
failure of the graphics controller envy14t-1000 flashes code?
For laptop of HP Envy 14-1000. i5 - 450 M, Radeon 5650 M. Out of warranty. New installation of Windows 8 Professional on an OCZ Agility SSD 4.
At startup, caps lock flashes code indicates a failure of the graphics controller. Stays on for 2-5 minutes, but will then start Windows. This indicates imminent failure and a replacement motherboard is necessary, or is it the result of something else?
On your laptop, there are several codes of different flashing given by a flashing caps lock key. You say that it is the graphical model controller failure error light. Use this document to make sure it is the correct error code.
The ENVY of laptops series have their GPU soldered onto the motherboard. So if you've got a controller failure graphics card you might have to replace the entire motherboard of the laptop. This interview is possible to do it yourself, although difficult. Even if you specify your product is out of warranty, I suggest to contact HP Technical Support again and look in an interview of the laptop. If you are in the USA / Canada, you can contact HP at 1-800-474-6836. If you are outside the United States / Canada then here try to find contact information for your region.
-
FOR FM10: add text at the insertion point
Hello comrades,.
What is the code for the current insertion point (where the cursor is placed currently?)
I've seen code to add text at the beginning/end of FMP, but not at the current insertion point.
Thank you in advance!
Try using textLoc instead of TextLoc for your variable. TextLoc with this spelling is a reserved word.
-
Tecra M5 (PTM51E) and the inability to install the graphics driver Quadro Vista x 86
Can someone help a newbie to this forum with a little problem I have on Vista Business build 6000?
I am trying to install vista driver on NVIDIA for the NVIDIAî Quadroa® NVS 110 M card site.
http://www.nvidia.co.UK/object/winvista_x86_97.46_uk.html
I saw that this map is not highlighted in the list of covered, but on XP/2000 "target ="_blank"> Pourenleverune the Toshiba site does not help either."
I have ensured that all previous NVIDIA driver is uninstalled and disabled all AV software on the machine, but when I run the exe I get an NVIDIA Setup error: -.
Setup has detected that the operating system in use is not Windows Vista... etc.
I have also ensured that all "Download Accelerator" utilities have been turned off when I downloaded the files.
Any help will be useful and if it's a simple solution, I'll be happy to commit seppuku in embarrassment.
Thank you
This is how I can get the AERO factory upwards and that the card is 128 MB running and should be able to run this.
Hello
First of all I would like to say a few words on the Aero feature.
Microsoft recommends the following minimum hardware requirements for running Windows Vista Aero:
1 GHz 32-bit (x 86) or 64-bit (x 64) processor
1 GB (1 GB) of memory
graphics processor with at least 128 MB graphics memory, which takes supported DirectX 9, with a driver Windows Display Driver Model, Pixel Shader 2.0 in hardware and 32-bit per pixel
The quality of the color in the display properties must be set to "Highest (32 bit)"Visit Microsoft read the article: how to get Windows Aero?
http://windowshelp.Microsoft.com/Windows/en-us/help/c33fe91a-9E6F-41F4-ae82-3ed2d5fa2fbf1033.mspxI have no experience with Nvidia Vista drivers but with drivers for Windows XP, and in general it s is not possible to install and use the original graphics drivers on the graphics card manufacturing site.
I think that you will need to install the drivers of Toshiba. If you have not found anything at this time that I guess you have to wait. ;( -
The upgrade of the graphics capabilities of laptop HP Compaq 6735 s
I recently bought a 6735 s and I am interested in the possibility of improving the graphics capabilities of the machine.
The chipset motherboard for this model is the ATI 780 G (http://www.amd.com/us-en/0, 3715_15532_15533, 00.html #780 G).
A characteristic of this chipset, it supports "ATI Hybrid Graphics", allowing thus the 3200 integrated core work in conjunction with an extra card to 3400 dedicated.
This feature is also described here:-http://www.notebookcheck.net/ATI-Radeon-HD-3200.9591.0.html
I have a couple of requests related to this: -.
(1) is this laptop provides plenty of internal space & all the connections needed to add a card to Radeon 3400 series?
(2) the extension of the ATI AXIOM interface or the more generic is MXM?
(3) where would I go to get such a card?
(4) the installation of such a card cancels my manufacturer's warranty 1 year? (according to my own research, this seems almost certainly yes)
See you soon,.
Rob
Message edited by AbU5er on 01/13/2009 04:08Here is a link to the bible MXM. Your laptop is not a MXM and as much as I know there no graphical upgrade:
http://www.MXM-upgrade.com/table.html
Here is your service manual which shows the bowels in their entirety:
http://h20000.www2.HP.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF & prodSeriesId = 3687621 & targetPage=http%3A%2F%2Fbizsupport2.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc01613452%2Fc01613452.pdf
Laptops don't usually not all the features of the chipset office corresponding, and only implement a few paltry laptops have upgradeable graphics. Usually, you can buy a laptop with graphics that you want to have for the life of the laptop, not with the idea of adding something better, once you get it.
The feature you're talking about is power Xpress and it allows you to move from the integrated graphics to a video card dedicated to the fly without a reboot, but it works in Vista, as you noted. It is one of the characteristics of the Centrino 2 platform, or at least the possibility to implement is. Fujitsu has just released computers laptops thanks to this feature (very expensive) and others are about to do, but I do not think that HP released a still.
nVidia also has a similar option and he was released at least a Sony Vaio, I think.
Here's the top of the line laptops and dual video option must be built the factory. It is not a feature added.
-
Is there a a way to users to add products in the front-end, using a Web - App?
I'm racking my brains trying to find a way to allow users to add products to the front-end servers on their own.
I'm building a site for a client who needs of users are able to create its own window, a bit like ebay. This is exactly the feature I want: Provider Frontend products - download Magento Connect
There MUST be a way to do this with a web application, even if it means writing in code... someone can suggest a way to do?
In short, case No., but is possible.
Solution 1: Hosted on BC, external interface which means that interface with the BC APIs, externally hosted server.
Solution 2: Wait for the API v3 comes out... no timeline given Adobe. This would eliminate the need for external API server.
Can do the two solutions for you, but the 2 will not work until adobe allows it.
-
Satellite P30 - error code 43 on the graphics card in Device Manager
Windows Vista Professional Edition loaded as my new OS for the studies and course work. Now my display driver no longer works correctly.
Device Manager displays the following message on the graphics card ATI Mobility Radeon 9600/9700: 'Windows has stopped this device because it has reported problems. (Code 43) »
Have search everywhere on the web for solutions but limited knowledge prevents me to get a positive result. There must be someone out there who can help...
Hi BigPappaDom,
In my opinion to get rid of this, you need to reinstall the display driver. I have checked the site of Toshiba Satellite P30 is no Vista driver available. This means that you must find yourself to get all the drivers. :(
I searched a bit and you should try to install the Satellite P200D display driver. She also equipped graphics card ATI and this driver must be compatible with your other oldest:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
Laptop > Satellite > Satellite P Series > Satellite P200D > display driverCheck this box!
-
Tecra M9-19 t PTM91E - the graphic card error: code 43
Tecra M9-19 t
Reference number: PTM91E-0SU044CZI have WIN 7 IN version and my graphics card no longer works, is the only thing I can get * Windows has stopped this device because it has reported problems. (Code 43) * in the windows Device Manager, it just stopped working (funkcions base work again - on the level of default vga adapter)
I already tried mounting new system including drivers of toshiba and nvidia sites, but does not
someone at - he had idea of somethink to do before sending it to the service? (last thing im going to try is winXP recovery installation after I have absolutely no idea)
----
EDIT: so I got it finally working after nather pilot bit reinstals - corectly worked for about 5 minutes - that the system crashed and im back where I started, seems that send you served becomes only option :-(
Post edited by: omiker
Hi mate
Before sending this unit to the partner service, you should check if the laptop computer and graphics card would work using the Toshiba software preinstalled.
It would be the first step in ASP too.
If the graphic is OK and if the error message would not appear then you'd get the laptop of ASP and you will have to pay for this service! -
I just install my new Iomega PX4 - 300 d and have enabled security. When I go to the users section and groups, there is no Add button to create new users or groups.
The Add button is available in other sections and I created with success of new volumes/shares.
I read the instructions and following the guides online without success.
Is there another setting that I missed?
He solved.
I disabled the security and then reactivated it.
The add users/groups button reappears.
-
2012 NAS server set full control for the Admin user, but cannot add files
Hi, I'm new on using Server 2012 (or any server operating system). I created a shared folder by using the files and storage, quick profile SMB services. I set the administrator with full access account. I added also a group of users with reading and only execute permissions, the administrator account is not within the group.
I have the drive mapped to my desktop running Windows 7 Home. I use administrator credentials to log on. I try to add files through the mapped drive, but does not have my permission to create or copy files ("you have authorized to perform this action"). I can't that speculate that the problem is caused by the run as account on my desktop do not match those of the server? Any suggestions on fixing this problem?
Note: I created a separate administrator account and a group on the server with a control total and still not able to add or modify files on the network drive,
Hi Sheener,
Thanks for posting in the Microsoft Community.
The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:
http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
Maybe you are looking for
-
Google toolbar, etc. are not supported. You have completely disturbed how I do business. I use Internet Explorer at the same time to what you provide me a way to return to V4 and stop upgrading my computer. Not been appreciated.
-
Automatic on-demand for printing on 8600
So my 6 year old niece signed for some children-letter to print every day. Problem is that she doesn't remember their login or password so I am unable to stop these dailies (colour) prints. Still not sure how she could know an e-mail or how she creat
-
HP 15-g08nr: removal of the keyboard
I just bought a new keyboard for this laptop. Can someone tell me how to get to remove it. I know there is a certain area on the bottom that you remove to get to the keyboard, but none of them are marked. Departing to dradles? I know I have to re
-
6500 copies too high to the top of the document
Printing: 6500 has more E710n-z Op sys: Windows 8.1 The printer prints too high on paper: the 6500 prints even his own test page with lettering half cut off at the top. Printing from Word is the same, so it's not a software or application problem. HP
-
I had for my power on password. I had to reset the password to put in a new, so he asked an administrator password, I put the same one as my power on. I did upgrade to the sign on screen my password wrong one after awhile he ask my administrator pass