CodeModuleManager and loading / execution of modules...

Similar Questions

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• CodeModuleManager and Class.forName

  I have a specific question.

  My application download both modules and install them.  Both modules are libraries.

  Module 1: Library without any dependencies.

  Module 2: Library that depends on another Module 1 and Module already installed.

  I have install the module 1 and then install the module 2.

  At this point if I call Class.forName ("class of module 1"), everything works.

  If I call Class.forName ("module class 2"), he throws ClassNotFoundException.

  Any ideas?

  The modules are correct return codes when installed CMM and make their appearance in the list of modules.  They are both duly signed.

  Note, installation from CMM requires a restart and the same problem occurs after restarting the device.

  It seems so be that module 1 using code RTT required.  After fixing that Module 2 is loaded...

• Error: Could not load the multiboot modules: already exists

  I tried searching for this error and can find no other instance of this error online.

  When my computer starts and ESXi startup, I get the pink screen with the message: "don't load the multiboot modules: already exists.

  It started after installing a hard drive used in my lap and make updates in shape and ready to be used as another data store.

  I do not give anything to the new data store or use the new disk, the boot drive by clicking.

  I stop my Tower and removed the faulty disk and now I get this error message when I boot it.

  I have a feeling that it should be easily fixed, I don't know where to start because I'm still new to Vmware.

  I would like to know if there is any information that you need help in troubleshooting.

  VMware ESXi 5.5.0

  Processor 8-core AMD FX-8350

  16 GB memory

  Jon

  It looks like the boot image is damaged.  You can always reinstall ESXi and leave the data intact store.

• Auto SMS sent from my iPhone 5 to this number SMS int ' l 447903553650 and loaded for free! No history of sms sent in my message box! How can I solve it?

  Auto SMS sent from my iPhone 5 to this number SMS int ' l 447903553650 and loaded for free! No history of sms sent in my message box! How can I solve it?

  Tap settings > Messages and then turn OFF send as SMS .

• Satellite A665-11Z - idle and load temperatures

  Guys pls. post your sleep (stand-by) and loading (games, multitasking, ect) in A665-11Z. While we could compare and know if he have overheating issues. Also, post you solutions to the problems of overheating and cooling method. Thank you

  Idle: 55-65 degrees celsius
  Load (game): 80-90 degrees celsius

  I have cooling pad and recently clean my radiator and fan...

  I wonder if this temperature is quite normal to same model (A665-11Z).

  > You also publish solutions to the problems of overheating and cooling method
  Always use the driver of Toshiba graphics card because it has a thermal protection.
  The pilot controls the GPU performance and slow performance if the level of the critical temperature is reached.
  The drivers of manufacturers of graphics card to origin don't support that and the use of this can lead to a higher temperature.

• I want to buy a Apple Watch in the Canada and use it and load it in Ireland. Is this possible?

  I want to buy a Apple Watch in the Canada and use it and load it in Ireland. Is this possible?

  Hello

  If you buy a Apple Watch the Canada, it will be completely compatible with your iPhone in Ireland.

  There are no regional differences in the hardware specifications for the watch, which can be configured to use your preferred language and format of the region.

  The included USB adapter pins will be located at the Canada. However, for charging your watch via the food in Ireland, you can use the charge cable provided on the magnetic head with a real 5W Apple (iPhone) or 12W (iPad) USB power adapter. You can also buy an extra Apple USB power adapter for your watch the Apple Store online for the Ireland:

  http://www.Apple.com/IE/shop/product/MD812B/C/Apple-USB-power-adapter?FNODE=83

  Service of the material to the title of the one year limited warranty is also always available in Ireland.

• Satellite L500-19 X starts and loads Win 7 always like the first time

  OK, so I bought a toshiba satellite L500 - 19 X to the United Kingdom in a store called carphone warehouse.
  It came with windows 7 pre-installed.
  I wanted the 32-bit version, so he ran faster, but he had installed 64, but came with a 32-bit restore disc.

  So I went ahead and restored, now, whenever my laptop starts up, it think it's the first time and load the toshiba implemented and stats to do things then restarts.
  He could do this all day until I hit escape and complete the configuration manually.

  No one knows how to stop this or I have to buy a full version of windows 7 and start again in this way?

  Please please answer now! Thanks in advance guys :)

  Thanks for this info!

• VI main and void / execution of vi

  I'm fighting a lot with my hand vi and Subvi execution problems a lot!

  I have a complicated system. To explain this, I create a simple main vi and 2 subvis. Please take a look at the attachment.

  It works as expected. The Boolean button in main vi is active when the Sub-VI-s do not run. But while the sub live run I can't access the Boolean button. I understand why it's happening. Execution is stuck in the Subvi and can not see any new entry in the main vi.

  My question is how can I solve this problem?

  What I want is,

  1 when the Subvi is running, I still want the Boolean button in the main to behave the same way vi compared to when the Subvi is not running.

  2. I would also be able to run the 2nd Subvi when the 1st Subvi is still running.

  Please help me out (I'm using Labview 2010.)

  Oh I'm sorry, I thought I saved them to LV2010, but I guess I've recompiled accidentally their latest version... VI joint for 2010.

  Seems I can't edit my previous post so forgive me for sending VI twice and if the moderators happen to see this, do not hesitate to remove from the VI in previous message...

• Data are skewed between saving and loading

  Hello

  I'll have a problem saving and loading the data in my VI. My software allows the user collect data from an acquisition of data which is then displayed on a graph for them to see. They can save the data, then load it back later to compare with the current data. Here is the basic methodology:

  1. the data are read in the program via a data acquisition

  2. data are saved in a file in spreadsheet to a table with the VI 'save in the spreadsheet file.

  3. the data is loaded to the program with the VI "read the spreadsheet file.

  4. the data are transferred in the same graph is was originally shown on

  However, when I save the data and reload, my chart is slightly distorted. I noticed a few things:

  1. the values of X are a little more for the loaded data vs the same data front to save/load (DECIMAL NUMBERS)

  2. the values of are are not affected. (WHOLE NUMBERS)

  3. the loaded data are more straight lines, which means that the same data point is used for row X or Y values

  attached is a screenshot of the graph - red data is from this session, Green data is loaded.

  export excel to this same graph is attached.

  No one noticed an interesting trend in this anomaly, or have any ideas on what I can check? My code does not change the values, but only manipulates them. Please let me know if you need more information, I've tried including as much as I could without a useless book.

  Thank you

  Joe

  To solve this kind of problem, replace the random number generators with a simple signal that you can easily identify as a linear ramp, the number of iterations or a low frequency sine wave. By selecting a signal that is suitable for your application, you should be able to tell if the data are all be recorded and in the right order.

  The use of nodes property to move data around sounds like a disaster in the making.  Examine the queues, user events, or functional global variables.

  Lynn

• help with photos, I took pictures with my camera and load them on my pc. ithen them engraved on a dvd .Although I can watch on my pc I can't watch on my dvd.

  I took pictures with my camera and load them on my pc. ithen them engraved on a dvd .Although I can watch on my pc I can't watch on my dvd.

  what I am doing wrong, and someone can help

  Two thoughts.

  1. not all readers of DVD load serious records

  2. don't you finalize the disc when you burned it?

• Save and load the string table

  Hello

  is possible except an array of channel with multiple line of text file and load new file to table with the same size of array?

  Because when I use the code in the picture, initialized array is 3 x 3 but after save and load file is table 5 x 3.

  

  If is an option how to save this table in the file into 3 x 3 table and charge back of file as a 3 x 3 table?

  Thank your for any suggestion,.

  Petr

  Your code is loaded in 5 x 3 is because two of your cells have newline characters (\n). The reading of the worksheet VI use return or line break characters and your delimiter to figure out how to split the string into an array.

  A solution might be to replace all characters from end of line with something else, and then reinsert it after reading of the worksheet.

  It can do what you want, even if it's a bit bulky. It's a little confusing if you don't understand "------" string formatting, but it essntially replaces all '\r' and '\n' with '\\r' and '\\n', including the conversion of the worksheet does not read as an end of line character.

  

• Windows XP computer - my wife is no longer will start and load one of its programs.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! My

  Ideas: Computer my wife is no longer boot up and load one of its programs.  When you turn it on, Windows XP loading blinks and then you get an error message that says: "you cannot use MSN to connect. Please choose another dial to open a windows session.  With this message, all you have is a 'OK' that affects when you click it, gives you your photo screen saver and nothing else, so you have no where to go.  A few days earlier, she had an alert to update update to windows 8, but she refused and it seems that since then, she has been the problem.  Can anyone help?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Refusing to install IE8 would cause problems, Indy. Try to post here for assistance instead: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I obtain and load the service pack 2 for my sony vaio 2000

  How can I obtain and load the service pack 2 for my Sony Vaio 2000 (model year) that I need it to have

  installation of some software.

  Rex

  I suggest to download the full Windows XP Service Pack 3 (not 2) and copy to a CD for future use, here http://www.microsoft.com/download/en/details.aspx?id=24

• I created a zip file and loaded a lot of things I wanted on now it's gone can anyone help me please

  Help me please I don't know where he might be, and I'm not part of computers

  Hello

  1. how exactly did you create zip file and load the file in it?

  2. where did you had stored it?

  Step 1: Check if the file is hidden.

  Step 2: Find the file using Windows search.