CD rom auto-run inoperative, winXP sp3

Similar Questions

• D20 + SATA ONLY + WINXP SP3 32 BIT

  Hi all

  Testing a D20 for the company and can not get the D20 to run as a SATA drive only. Currently, its spinning the Marvell controller with a 500 GB drive in.

  Have tried to get into the BIOS and disable the RAID controller but then I can't use the HD as just a SATA drive.

  The only joy I had is to plug in a diskette with 32-bit controller Marvell drivers starting with Windows XP 32-bit, as he travels through install press F6 to install the drivers for the controller, and then once I hit continues to back installation/format disks, I get a blue screen of death. The strange thing is that if I use our WinXP SP3 32 bit copy of Microsoft license which it MUST be installed with I get the BSOD, but if I through in a Dell WinXP SP3 32 bit OS disk I can install the operating system without problem at all!

  All I want to do is really disable the single use of SATA drive only (somehow) RAID controller and install WinXP SP3 32-bit using our copy of Microsoft Licensing with this blue screening!

  Any help would be fantastic!

  See you soon,.

  Ant

  Hi all

  Do not worry, I managed to get by

  For all those who need to know also I will post an update of the instructions on how to do it a little bit after I managed to install the operating system

  Kind regards

  Ant

• How 2 WinXP SP3 laptop to connect to each other & share files between them?

  Both run WinXP SP3 & all have two ethernet 10/100 cards & an ethernet cable to connect them.  I just want to be able to transfer files between them without having to use a USB key.  Regardless, both can access internet via WiFi. I tried to run the Configuration Wizard from the network several times but they do not always see them.  I need an answer in plain & simple English that my ability to speak geekinese gone with DOS6.22.  My conversational geekinese went out with Win98.

  Hello

   
  Please click the link below,
  How to use Simple file sharing to share files in Windows XP
  http://support.Microsoft.com/kb/304040
  For more information, please see the link below.
  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP
  http://support.Microsoft.com/kb/307874

• Auto Run will not launch CD or DVD

  I'm working on will to Auto Run of details (M4300 & M6300) Dell two will work with either everyone has a CD / DVD +-RW from different manufacturers. Will launch the USB key.

  Each will work when Cyberlink PowerDVD (Dell is uninstalled)

  Can someone give me a fix for this? with Cyberlink PowerDVD installed?

  Notes:

  Readers turn up.

  Readers see the media which are on the CD or DVD and can be opened from my computer.

  I tried to winautorunfix.exe (or something like that) Regedit seems ok I guess.

  M4300 XP SP2 Cyberlink 7.0; no update of MS. and then updates SP3 with all the MS & DEll. TSST corp DVDRW DL.

  M6300 XP SP3 Cyberlink DX 8.0 with all updates from MS & Dell. HL-DT-ST DVD +-RW GSA-T21N.

  Both have MS MediaPlayer 11 has started with 9 and Roxio Creator 9.0 OF

  
  

• Flash Player 10 fails to install on WinXP SP3

  WinXP SP3 with IE7. Use the tool correctly uninstalled and uninstall the previous version of the flash player. Now, when I try to install the current version of the flash player 10.0.12.36, it makes on the screen "when you see the full movie of the installation..." "but the film comes and flash player is never installed. The software McAffee anti-virus is disabled, pop ups allowed, cookies enabled, and the firewall is disabled. Need help on getting this facility.
  

  The solution is to:
  1. manually download Flash Player 10.0.12.36
  2. use the utility to uninstall with the /Clean. option
  3. restart the computer. Disable the antivirus software.
  4. run the installation of Flash Player 10.0.12.36.
  5 cd to C:\WINDOWS\system32\Macromed\Flash
  6. run NPSFW32_FlashUtil.exe
  7. This creates FlashUtil10a.exe
  8. run FlashUtil10a.exe
  9 restart the computer. Make sure that the antivirus software is enabled.
  The Adobe test version now and display the version 10.0.12.36.

• Sreen auto running

  Dear Apple,
  I use A142, long dyja 16bg ipad always update apple new operation software.when used iSO9.3.1 my ipad was good running... but when I update iSO9.3.2 my iPad was looking FOR auto running without any touch to new update iSo9.3.2. I iSO 9.3.4 system. but even reset on 2 or 3 times & restart problem.then have the same problem. When I try to type somethig its automatic typing something, without any sreen touch Zoom, auto searching.when im open facebook, google then sreen auto open open the profile.auto page. I don't know why play? Please tell me what is the solution?

  Hello M shrestha,

  Thank you for using communities Support from Apple!

  It is my understanding that you experience unexpected behavior with your iPad.  I will do everything I can to help.

  Looks like you have already done a reboot and reset.  These are two good troubleshooting steps.

  The next thing we want to do is to ensure that you have a current backup of everything on your iPad.  If you follow this link, you will find instructions on how to make a backup:
  How to make a backup of your devices using iCloud or iTunes

  Once the backup is complete, we want to restore all settings.  Reset preference files resets all parameters that may be problems. This step will not delete your contacts, photos or personal information. It removes all your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and removes your Touch ID & password.

  Do you this by clicking on settings > general > reset > reset all settings.

  Once you have done this, test the iPad and see if it works properly.

  If the problem persists, the iPad would need to be restored like new.  Once the iPad is restored as new, check if the iPad is working properly.  If she continues to behave erratically, it should be examined by a technician.  If it works correctly, then restore the backup and confirms that it continues to work as expected.  If the question comes up, then there is something in the backup as the origin of the problem and it will need to be restored like new again.

  Restore as new by following the instructions in this link:

  How to clear your iOS device and then set up as a new device or restore from backups.

  Have a great day!

• Re: Satellite A210-19 WinXP SP3 Card Reader/Buletooth question f

  Hello.
  I have laptop Satellite A210-19 f and I can't read any card in my player card on WinXp SP3.
  Utils installed SD and card reader controller.
  It does not work. Also my bluetooth does not work too. After installing bluetooth monitor noething happened.

  Any suggestions?

  _Regarding SD card problem: _
  Go to Device Manager, remove the SD card reader, restart the laptop and reinstall the driver from SD card.
  The problem could be that XP drivers are not released for the A200 PSAELE series.

  In this case, you will need to use the Flash Media Driver of Texas Instruments, which was released for other series.

  _Regarding the problem of Bluetooth: _
  BT monitor is not the driver!
  You need the battery Bluetooth!

  You can download here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Good bye

• Cannot transfer files (.doc, .pdf, .xls, etc.) to the Xoom on WinXP SP3

  At home, I have Windows 7 and have only minor problems, file transfer to my Xoom. I invited to Skip, Skip All, ignore, etc. but only am allowed to still transfer files.

  My question is at work on my WinXP SP3 machine where I want my Xoom transferable working documents for when I travel. When I transfer, I get a prompt similar to Skip, Skip All, but no option ignore and continue to transfer, only to cancel. Since Mico SD card does not right now, I need a way to sync my Xoom upward with my working files.

  Someone has an idea? All my research was unsuccessful.

  Download WMP 11 and restart

  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player

• Satellite A300 - Continuos HDD access with WinXP SP3

  I recently bought a Satellite A300 (PSAGCE) with Windows Vista installed: I resized the main partition of Vista and installed WInXP Sp3 on a new partition.
  Everything went well, thanks to the Toshiba support site full of work XP drivers.

  I noticed that randomly the HDD LED is on and the operating system is continuously disk access: this happens as soon as I open a new window of Windows Explorer, explorer.exe freezing and refusing to close the PC.
  But this is not the only cause of the problem: HARD drive sometimes starts to be consulted while I am using a generic application (this is not the same each time).

  I was thinking a chip or a problem of control of storage, but I installed the latest drivers of Toshiba/Intel.

  Any idea?
  Thank you!

  I think it's normal.
  Maybe you have a virus or your antivirus program scan the HARD drive. Check it!

  I could be that your HARD drive is faulty, but I doubt that.
  However, you can test with Drive Fitness Test (Google is your friend).

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• I can install windows 7 have my computer running windows xp sp3 currently?

  I can install windows 7 have my computer running windows xp sp3 currently?  I am aware that vista and 7 use a lot more ram or memory so I don't know if my cpu under xp can run windows 7.

  Yes, it is possible to install Win7 on a Windows XP computer. Start here: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-xp-to-windows-7

  However, Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When compacting OE in WinXP SP3 I get a message that OE has encountered an error and needs to close

  When compacting OE in WinXP SP3, I get a message that OE has encountered an error and needs to close that he made and lost messages in at least one of the message files. I can retrieve messages from the backup files, but I can do anything to correct the compaction process?

  The simplest solution is a new identity.  File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  To help prevent that this happens in the future...

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

  Original title: MY PC has CRASHED or?  Windows XP - SP3

  Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

  Hello

  Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

• How can I fix MS Sans Serif fonts in WinXP SP3?

  I played FSX on WinXP SP3 and suddenly police dialogs commune, looked weird. Seems like the problem, it's my default system font (MS Sans Serif) was erased, so all elements of dialogue text using this default font to display text with big letters, usually they do not fit in the room and messages are trimmed.

  I tested some programs that use the default font by using MS VS resource editor and XN resource editor. In all cases, the default font is "MS Sans Serif, 8pt", but when I click on the combo of fonts, the police is not displayed.  I have other 'similar' fonts: Microsoft Sans Serif and MS Serif, but not exactly 'MS Sans Serif '. I don't know if it's the same font as "Microsoft Sans Serif". Anyway, if I go to regedit, I have not entered fonssubstitution. Any idea on how could I solve this problem?

  Bah! Forget it! I just had to copy sserife.fon from another PC into my fonts folder and that's it!

• My secondary hard drive (f) disappeared. However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

  My secondary hard drive (f) disappeared.  However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

  Hello what jay,

  Thank you for your message.  Please, try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on "disk management".
  Here you see secondary hard drive?
  If so, you can assign it a drive letter and everything should be good.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.