cold backup can use archivelog to recover the database to the point of failure?

Similar Questions

• How can I restore and recover the database to a different server using RMAN?

  Hello Friend:
  
  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.
  
  That's the two servers. different stored different on each server and a single link, a table library where backup set.
  
  I can only restore and recover the database of the Rman command. Could you give me a demo?
  
  Thank you

  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

  That's the two servers. different stored different on each server and a single link, a table library where backup set.

  I can only restore and recover the database of the Rman command. Could you give me a demo?

  Check this box
  * How to restore Rman backups on a different node when the Directory Structures are different [ID 419137.1] *.

• My page has been deleted.  Can I restore or recover the files somehow?

  My page has been deleted by mistake.  Can I restore or recover the files somehow? Contribute 3

  This forum is really about the cloud, only not on the use of individual programs

  Once your program downloads and installs without error, you need the program forum

  If you start the http://forums.adobe.com/index.jspa Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it says all THE FORUMS) to open the drop-down list and scroll

  http://forums.Adobe.com/community/contribute

• My wife has created a book of the best photos of the year project. How can I copy these photos in a standard album so I can use this set in the future?

  My wife has created a book of the best photos of the year project. How can I copy these photos in a standard album and the book so I can use this set in the future? All the commands I want to use are grayed.

  Using Photos of Apple.

• How the installation and from D-link DES-1024r program to the internet so I can use 2 PCs on the internet

  How the installation and from D-link DES-1024r program to the internet so I can use 2 PCs on the internet

  "Why can´t I share my Internet connection on multiple computers if you use my D-Link switch or hub?

  "If you connect directly to a cable or DSL modem, you will need a router to share your Internet connection or a computer using ICS (Internet Connection Sharing) or Proxy." Switches and hubs don't allow you to share a single IP address to multiple computers.

  Another solution is to contact your ISP and buy additional IP addresses for each additional computer. "

  D-link support found here: http://www.dlink.com/products/default.aspx?pid=DES-1024D&tab=3

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to know if I can use creative cloud with the same account on different computers

  I want to know if I can use creative cloud with the same account on different computers, because my children want to she and I have known if I buy when I can use it on several computers at the same time

  If it is the individual subscription, you can activate on 2 computers only.

  However, there is no limit for installation, but you can connect and activate on 2 computers only.

  If you had already signed and activated CC apps on 2 computers, and there still if you want to activate on a 3' rd computer, you can simply disconnect one of the 2 comps, so that you can keep counties of activation.

  For more information, see the link below:

  https://www.Adobe.com/content/dotcom/IE/products/creativecloud/FAQ.html

• Please can someone tell if I can use my creations with the tool shape in Photoshop, commercially for example on t-shirts? [was: on]

  Please can someone tell if I can use my creations with the tool shape in Photoshop, commercially for example on t-shirts. Thank you.

  Yes.  No problem.

  [EDIT]  I decided to qualify that.  No problem with forms that come standard with Photoshop, but just about every logo, symbol of the brand, can be downloaded in two vector forms and brush presets.  It would be another story, obviously if you have used this kind of work, but you knew I'm sure.

  

• You can use a Clip in the UILoader?

  You can use a Clip in the UILoader?

  Thanks, rower

  You can load a swf file using the uiloader.  what you trying to do?

• You can use functions defined by the user in orardf: statement?

  Hello, reading Chapter 5: refined for RDF data access control
  I found this example:
  
  OPTIONAL
  {
  ? control pred: hasContractValue? Val.
  ? control pred: hasManager * ' sys_context ("his $ appctx ', 'app_user_uri') ' ^^ orardf: instruction *.
  }
  
  See the orardf type: statement, I got the question if you can use functions defined by the user in the place where he has used the sys_context?
  
  Thank you.
  
  PD: The translation was made from Spanish to English by using Google Translator

  Hello Alberto,.

  Only the sys_context function is supported. The user-defined functions are not supported.

  Thank you
  Matt

• How to recover to the point of failure

  Hi all
  I m a beginner and I have a q about rman - i have yesterday backup and I want to recover the database to the point of failure (failure of any datafile eg.point or tablespace or redolog controlfile). How can I recover the data? turn help extremely apreciated.thanks.

  938946 wrote:
  Dear friends,
  I have two tables i.e. at 08:00 table1 and table2 to 8:20.i recovered the database with rman with catalog until where 8:18.i am the deleted table
  Table2 but when I checked the table1: I m getting erro-table1 does not exist in the database.why RMAN does not recover table1 (although table1 is abandoned before table2) your help is extremely appreciated.thanks to all my dear friends.

  Because you got up to 08:18. 08:18, table 1 had already been deleted. 08:18, that the State of the database was there was so no table1. And the point at which you have recovered your data base.

  RMAN does this by applying all do it again (that is, in re-applying the DDL and DML) which took place between the time of the data file that is restored and the time to 'recover' you have specified. Since this time has been after you delete table1, he again applied the DROP statement.

• The Nike Apple Watch can use bands other than the band of Nike, it comes with

  I am looking to buy a Apple Watch series 2 and I'm not sure if I want the Nike + one or not. So I was wondering if I can use any other group with her other than Nike, with it will come?

  Hello

  Yes - all the bands of Apple Watch, past and present, will suit any Apple Watch of the same size of the case (42mm or 38mm), including Apple Watch Nike +.

• You can use NI 9237 for the LVDT readings

  Dear comrades,

  I wonder if I can use NI 9237 and NI 9945 to get the reading of an LVDT. The interest is to measure the movement using Solartron DC Miniature LVDT.

  In our laboratory, we have NI 9237 and NI 9945 and I would get your advisor if it would be good enough to measure the movement of an LVDT.

  Thanks in advance.

  Hi Gtharm,

  For the Solartron DC Minitature LVDT transducer already includes oscillator, demodulator and filter which alow the sensor to accept the input voltage and provide a DC output from the position. Therefore, instead of using the bridge according to the measure such as the NI 9237 or NI9945 modules, you must only input I take the input voltage.

  The LVDT voltage range would determine which modules HAVE you need to take the measure. Of the specification, you need to at most 100 Hz to get the signal from the probe safely.

  I hope that this help mate.

• You can use local drive as the mapped drives raw groups

  We have a new host with vShere4U1 installed on a couple of mirrored disks.  The host will initially run a SQL server and the operating system will be SAN (fibre) as all of our other machines are virtual host.  We do not have enough space on the SAN or the budget to upgrade to allow us to run the newspapers/Db SQL, then the host was purchased with an extra 14 discs (much less expensive) who were divided into two disk RAID groups 1 + 0 (410Gb & Go 540)

  I can attach disks locak to the host, but it is shaped as a vmfs and the dbo wants to use these discs as raw as he wants to use the size of the set and is limited to 256GB VMDK in the vmfs.

  Is there a way to present records in vSphere while they give me the opportunity to fix to the virtual machine as raw disks similar to the san, or in any other way.

  I'm a pretty confident user of ESX without being an expert (admin typical average closed sys - too many hats) and basic linux would be appreciate some comments/help.

  Home - HP DL160 G6

  See you soon

  If you remove the data store and then choose a block size, you can have a data store up to 2 TB in a single LUN. If you need you can extend the data to 62 to using extensions store.

  You really want to use raw disks. I don't know if it is possible anyway.

• We can use EXISTS in which the condition

  Hi all
  We can use EXISTS (instead of IN) in which the status of a query that is not part of a subquery?
  
  for example:
  
  Update gpf_vou_sm set up_amt = 0 where src_cd ('1101 ', ' 1201');
  
  the application works very well with the IN instead of EXISTS operator.
  
  Everyone please help.
  
  
  Thomas k prakash

  Using in your case is better...

  Yu S.Nayef are right IN suits here because the values are known

• You can use variable substitution in the Calc script.

  Hi guys,.

  I want to use variable substitution in the calculation script. I v_SECSUBAREA that my substitution variable and its value would be like C12.00 or C13.00 or C12.00, C13.00.

  But it gives me error mentioned below by checking the syntax of the calculation script.

  Error: parsing formula [statement of DIFFICULTY] (line 15) 1200315 error: invalid object type

  Calculation script:

  -----------------------------
  

  FIX (& v_CLEARYEAR, & v_CLEARMON)

  FIX (& v_SECSUBAREA)

  DIFFICULTY ('REPGBP', 'REPEUR', 'REPUSD', 'local', @DESCENDANTS ("DIVISION"), @LIST(&v_SECDNBENTITY), @DESCENDANTS ("SubAnalysis"),

  @DESCENDANTS ("RTNROW"), @DESCENDANTS ("RTNCOL"))

  CLEARDATA "RESUB."

  ENDFIX;

  ENDFIX;

  ENDFIX;

  Variable substitution:

  ----------------------------------

  PRC

  COR_ALL

  v_SECSUBAREA

  C12.00

  Calculation script does not have C12.00 as the value for the variable substitution. If I give FY15 then Script gives me a correct syntax.

  Please help me to get this resolved.

  Thank you

  Shruti

  Hello

  Assuming that you calculate in the PRC. Database COR_ALL.

  You may set the C12.00 value in quotes like "C12.00".

  Kind regards

  Philip Hulsebosch.