Similar Questions

• Cold Clone 4.03 converter - is no longer a connectivity - used to work

  I have a Dell Server physical - 1950.  I used 4.03 Converter Enterprise (after adding the Perc driver) cold Clone is several times, even just two weeks ago.  It works without any problem.  Sometimes I clone this box for backup reasons because I'm not yet ready to move to VMware still.

  In any case. Today using the same exact CD start at 4.03 Converter Enterprise I no longer get my DHCP address. The Converter CD says "no network connection available.  It seems that although I do not know how to test it on that physical server using the clone boot CD there is no connectivity.  I also tried to manually set the IP address, but it will not yet communicate.  At least I can not ping the address of another computer.  The converter program displays my Broadcom adapter to network with the exact model number.

  If I boot Windows Server (which uses the same IP address), the server works fine.  If no outside don't switch issues etc.

  NOTHING physical changed in my environment.  The only thing I did was use the Dell Open manage DVD to update server firmware. I was a little bit outdated good, but complete Dell update program fine.  I checked it and the firmware is up-to-date.  Also when I'm trying to clone, I use the boot CD get cold, then any software side server should not be a problem (well, I guess?).

  Thanks for the help.

  HMorris

  Strange question.

  But maybe the driver on the boot CD is too old (related to the barrette microcode).

  Have you tried to use an updated driver?

  André

• Clone from a free template network

  Hello

  I want to create a new workflow that perform the following tasks:

  1 clone from a model (no network card is connected to the model)

  2, add a new network adapter to the virtual machine

  3. run sysprep (config network card, add to the domain etc.)

  I find the workflow dealing with cloning, but each of them begins with information on the network adapter for the model.

  For this purpose, when I try to use these workflow, I get the message: Fault.NicSettingMismatch.Summary

  Y at - it of the other workflow that I use to accomplish my task?

  Thank you!

  Hello

  Indeed, the library workflow expect the model to have at least a network card configured.

  You can change the template? (which might be the easiest way to go :-))

  You can also:

  Create a new workflow that clones just the virtual machine, but do not customization (there could be some in the library), I hope, it works without network card on the template.

  To add the network use onyx to understand what logic of javascript is needed (not sure if there is a "workflow" that in the library)

  Check the workflow (s) 'Custom VM' in the library for parts of sysprep (at this time, that the created virtual machine must have a network)

  Kind regards

  Joerg

• Where can I find the cold Clone CD?

  It was my understanding that if you have an Enterprise Plus for ESX license, the cold clone CD is available with converter, but I'm not in converter downloads.

  Let's do some P2Vs soon and I would like to have the CD handy, just in case we need.

  Can someone indicate its secret location?

  Thank you!

  down, you could load MOA by Ulli

  http://www.sanbarrow.com/MOA.html

  It is a very good replacement for Coldclone

• Choice between warm and cold Clone?

  Is there any particular scenario we need a cold Clone instead of a Clone of hot?

  A hot Clone will not be corrupt / modify all the data on the physical machine?

  Thank you

  A hot clone can update the changes made during the conversion - at least if cloning hot I would like to disable services that cause a writing heal the conversion such as SQL or Exchange.

• Creation of a test network

  Hello guys,.

  We have a vSphere 4 with four v4u2 of ESX servers. The network is composed of 3 vSwitches that are configured on each ESX Server. Two of them are configured with the VLAN ID and the other without VLAN ID. The uplinks are connected to a Cisco switch that is configured to allow the ports (trunk) the VLAN on the uplink of the skeleton.

  Now, to the question:

  We need to set up a test network environment without changing any of the above, next to add software configurations. The main idea is to use VMs restored from backups who "think" they are in a real environment and communicate with each other using their original IPs, but in any case, they are not allowed to talk to the real outside world VM.

  At first, I tried to create a "private" network, but now I realize that it only works if the virtual machines are on the same ESX Server. I can force the vCenter to start on the same ESX with manual DRS, but I wish that this configuration to work between all the ESXes.

  I thought that setting up a new network with a new VLAN ID on the switch, but I don't know if it will be isolated...

  Is it possible, and if the answer is Yes, how can I set up on the ESXes and on the Cisco switch?

  All of the responces are appreciated.

  Kind regards

  Leonid

  You only have to add the new portgroup (with the right VLAN ID) on the vSwitch with existing VLANs and to create the new VLAN ID.

  André

• Pavilion dv7: need to device network controller driver

  Need driver for network controller.  Went to the Device Manager and got the following:

  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086 & REV_00
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
  PCI\VEN_8086 & DEV_0084 & CC_028000
  PCI\VEN_8086 & DEV_0084 & CC_0280

  Please send the link to the drivers, I need.  Thank you

  Hello

  Intel PRO/Wireless

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54900.exe

• need driver for network controller

  I need driver for network controller for my hp probook 4530 s

  Hardware NETWORK CONTOLLER ID

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI\VEN_10EC & DEV_8176 & CC_028000

  PCI\VEN_10EC & DEV_8176 & CC_0280

  Hello:

  You need this driver...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Problem with: Clone, windows with a single NETWORK adapter

  Hello

  I have some bad problems while trying to use the following workflow: 'Clone, windows with a single NETWORK card. I always get the following error message: "task"CloneVM_Task"error: a specified parameter was not correct. "

  "Spec.Identity.Password.Value (name of the dynamic Script Module: vim3WaitTaskEnd #20).

  So I guess I have a problem with a password but I don't know what password, I give for the input parameter "channel passwork. It is encrypted if the indicator planText partner is false"I do not understand what password I would give here because I do not give any account of domain user.

  Is there anyone who has already used this workflow and can give me some advice on how to use it properly?

  Any help is appreciated.

  Thank you

  If I remember correctly, that's your administrator password local if it has been defined or the new password set if the model is no password defined. But then I did years ago doublecheck Yes.

• ISO bootable Converter "cold Clone.

  Hello

  Can someone explain pls where can I download or post a link to the converter to ISO bootable "cold Clone?

  I have a license for Virtual Center 5.1 and the other stuff of VI.

  Here is a link to download clonecd 3.0.3 and also how to use with vSphere 5: using the ISO 3.0.3 cold Clone with vSphere 5 |

• Oracle9i cold clone failed

  We use VMware converter last cold clone (VMware-convertercd - 4.1.1 - 206170) a server oralce 9.2, the OS is 32-bit, windows 2003, the physical server have 2 CPU (8 cores in total) and 4 GB of RAM, we just adjust the shape of data disc size 300 to 100, ESXi server version is 4.1 update1 after work of converter completed without error We turn on the virtual machine, we try to start oralce, we got the error message:

  "ORA-27102: out of memory.
  OSD-00029: Message not found 29; product = RDBMS. installation = SOSD.

  How can I solve the problem?

  Check the boot.ini on the server. Since it is 32-bit make sure that/fastdetect 3 g is here or there.

• Cold clone VSPHERE 4.1 virtual Center

  Hello!

  ID like to cold clone a Machine virtual Windows Server 2003. I use the VMware-convertercd - 4.1.1 - 206170 coldclone.iso. After a few seconds the imoport fails

  Journal for VMware Converter Enterprise Client, pid = 864, version = version 4.1.1 = build-206170, option = release, section = 1

  Current working directory: X:\VMWARE-CONVERTER

  HOSTINFO: See Intel CPU, numCoresPerCPU 2, numThreadsPerCore 1.

  HOSTINFO: numPhysCPUs is 0, bumping at 1.

  HOSTINFO: This machine has 1 UC physical and carrots 1 1 logical processors total.

  Recorder P2V created

  Initialize SSL

  Using the libcrypto, version 9070CF

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  Created SSL context

  AppInit finished

  Error deserializing State responsible for employment: FileIO error: did not find file: Z:\jobs\jobManager.xml

  Start of the execution of a task

  Connection to
  .\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Connected to the
  .\pipe\vmware-converter-VMDB

  Unknown path: /vmomi/

  By ensuring that this interface UFAD version vmware converter - 4.1.1

  UFAD interface version is vmware-converter - 4.1.1

  Execution completed the task

  QuerySourceInfo called

  Start of the execution of a task

  Successfully connected to VMImporter

  Execution completed the task

  Start of the execution of a task

  SSLVerifyCertAgainstSystemStore: CertGetCertificateChain failed. LastError =-2146885628

  SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  • CertGetCertificateChain failed

  SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

  Connection to host on port 443 192.168.25.6 using the https protocol

  SSLVerifyCertAgainstSystemStore: CertGetCertificateChain failed. LastError =-2146885628

  SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  • CertGetCertificateChain failed

  SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

  User administrator authentication

  Connected!

  Start logout()) *.

  Finishing logout()) *.

  Execution completed the task

  GetTargetDiskSize called

  Start of the execution of a task

  Successfully connected to VMImporter

  Execution completed the task

  CheckDestAvailable called

  Start of the execution of a task

  Successfully connected to VMImporter

  Execution completed the task

  Called CheckDestParams

  Start of the execution of a task

  Successfully connected to VMImporter

  Execution completed the task

  Adding work 1

  Starting work 1

  Start of the execution of a task

  Connection to
  .\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Connected to the
  .\pipe\vmware-converter-VMDB

  Unknown path: /vmomi/

  By ensuring that this interface UFAD version vmware converter - 4.1.1

  UFAD interface version is vmware-converter - 4.1.1

  Execution completed the task

  DoImport called

  Start of the execution of a task

  Successfully connected to VMImporter

  Task failed: P2VError FILE_OPEN_FAILED(vpxa-nfc://[MD3200i] TEC/TEC.vmdk@esx01:902!52 1d 20 5d 1a 85 3f 7b-83 0d 1f 12 db 7d e9 8a)

  Connection to
  .\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Connected to the
  .\pipe\vmware-converter-VMDB

  Unknown path: /vmomi/

  By ensuring that this interface UFAD version vmware converter - 4.1.1

  UFAD interface version is vmware-converter - 4.1.1

  -

  ---

  I think the problem is that the converter (WinPE) cannot resolve the ESX host name:

  2010-11-24 20:24:02.515 "P2V" error 772] task failed: P2VError FILE_OPEN_FAILED(vpxa-nfc://[MD3200i] TEC/TEC.vmdk@esx01:902!52 1d 20 5d 1a 85 3f 7b-83 0d 1f 12 db 7d e9 8a)

  So, how do I cold can clone a physical Machine without DNS?

  Any ideas?

  Big names HB

  Hello

  You can try some of the following ways:

  (1) add the entrance to host your DNS server or a DNS temp and then go for setting manual ip set dns temp

  (2) use the IP address to be converted as suggested above

  (3) perform a hot migration where the host can be added to the host file where the converter is running.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• What happened cold Clone?

  Hello

  I'm using Converter 4.3 build but having no chance hot cloining.

  What happened to the old function Clone cold, I usually use?  I find in Vcenter converter.

  Thank you in advance,

  If you have an agreement with VMware SnS, you can download the stand-alone version of the company which has the coldclone.iso.  You will find in the vCenter for U2 download

  http://downloads.VMware.com/d/details/vc40u2/ZHcqYmRoZXRiZHR3dA==

  VMware vCenter Converter BootCD

  A Zip file that includes the VMware vCenter Converter BootCD (to perform conversions of cold clone of physical machines into virtual machines) and the peTool utility.

• Conversion from cold clone process in VMware Workstation

  Hello

  We would like to convert a Unix physical in our branch abroad using process cold clone with VMware Converter.

  In this industry, there is no ESX, so we will try to convert it to VMware Workstation.

  Can transfer us files from computer virtual via ssh we and configure a virtual machine on our ESX.

  The coldclone VMware is just a Windows Server bootable CD with VMware converter installed so it will convert into a virtual Workstation 3 machine. The major issues will be if she recognizes the installed physical devices (disk controller, NIC) If you are on a SUN server. If you like I want to practice so that you know what questions you have material. You can also use things like Ghost or Acronis or, possibly, Vizioncore vConverter.

• Can I convert a server with software RAID with cold clone CD?

  I have a win2k3 server that has two disks (RAID 1 software), I can convert the server with software RAID with cold clone CD?

  Yes

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual