ColdFusion 8 Bugs and issues

Similar Questions

• CAMERA BUGS AND ISSUES - please report them in this thread. REPORTS ONLY PLEASE.

  If you have had an accident unexplained camera or a bug please report it here in this one single thread. By reporting any camera hangs in one place and not in separate threads, as well as information on the configuration of the camera and aboved we hopefull can achieve several things:

  1: know just how big or small the problems really are. These incidents isolated or is there a bigger problem. There are thousands of F5 Networks and F55 in operation day after day. It is not surprising to find the weird device with a previously unknown hardware or a software problem, but if there are several examples of the same show, then this may indicate a problem of firmware. By collationg, all unexplained of bug reports in one place that we can find areas of interest.

  2: by including a detailed report of what is past and what accessories were attached to the time where we can look for common factors that can cause problems.

  3: Sony only needs to check a thread to see what is happening, they do not need to browse through pages and pages of stuff.

  ONLY after a bug/crash report. NO feature requests or ' I wish that... ". "Lets keep the clutter of wire free to make it easier to see any real operational concerns. I suggest a single page that can be updated with workarounds or know bugs that users should be aware of. Please do not discuss your problems or other problems on this thread. That's just pointing that out. If you want to discuss a topic report it here first, and then open a new thread on this specific issue.

  WHAT TO INCLUDE IN A BUG REPORT:

  Please provide the following information:

  Version type and the firmware of the camera. Version of the firmware so attached R5.

  Attached Aboved, include R5, adapters battery or power supply, viewfinders, monitors connected directly to the camera.

  Type of battery and the brand, the battery charge State if know.

  The type of SxS card, preferably the part number on the back of the card for example 'SBP - 64.

  The record format and pace. All special modes such as slow shutter or S & Q.

  If you use a scene or non-standard file defining let us know.

  What you were doing when the bug appeared and what has happened as well.

  Everything you think might have contributed to the bug or what you're doing to get around.

  Moderators: I think it must be done in a sticky?

  As reported in another thread: If you upgrade the firmware and then load a FILE ALL created when the appliance has been set at 25 p/50 p, then the camera crashes while recording. For now, I would recommend creating a FILE all charges or the SCENE FILE for each version of firmware.

• How to deauthenticate vista so that I can reinstall - my computer got a nasty bug and I need to wipe it off and re - install it

  my computer got a nasty bug and I need to wipe it off and re - install everything
  I can't get anything to run now

  Hello

  they are not back up the disks provided with your computer

  they are recovery disks to reinstall vista to the way in which you bought

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  ___________________________________________________

  and I mentioned the things to do if you have problems with activation

  Re-read my 1 re [fold here

• Captivate 8 is NOTHING but the bugs and errors and aggravation - effects are Worthless

  I'm a discharge again.  I'm Captivate in hell.  Absolute hell.  This program is the worst thing I have ever been faced with aid - the simplest of things, THE SIMPLEST of THINGS, cannot be done without aggravation and headaches.  I can't tell someone how exact and my hatred of this program is accurate, words cannot express such deep emotion.  Suffice it to say, I'm in hell.

  All I want to do is get a series of phrases from the right, to the left, with audio, timed one after the other, with about 5 seconds between each ease-In.  NOPE.  I made and remade 6 times now, and all 6 times the effects are screwed up, don't work and lock on.  I can't take more.  I can't just take another day about the stupidity of this program. The simplest Animation 101 idea of easing in the text is this shit hardest I've ever had to do in this crazy program.  I can do this with my eyes closed in other animation programs.

  GOD I WISH FLASH WAS STILL USED!

  I recommend to my superiors to empty the trash as soon as POSSIBLE.  Development time has double because of bugs and other problems of Captivate.  I can't take more.

  Have you tried to download the evaluation version of Captivate 9 and study the effects of the recently renovated it?  If this is not the case, at least take a look until you throw you under the bus.

  You can also find the new delay action useful because it allows you to specify with advanced Actions in periods of time between actions.

  If none of this helps, there is always a Storyline.  Out of the frying pan...

• Bugs and crashes into the store and InDesign CC

  Since, for it to work I spent cs6 to creative cloud the number of bugs and crashes, that I had in Adobe programs went from rare on a daily basis. I mainly work in Photoshop and InDesign. It is rather unfortunate that Adobe has forced all its customers to pay a fee monthly for their software, and doubly unfortunate that it generally doesn't work as well as it did before. Do you have any plans to implement some stability fixes, or we will lose our job twice a day for the future foresee-able?

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

• Can I go down to 9 v?  10 v has too many bugs and security issues

  the e-mail is accessible from the lock screen.  Not sure!   or private!

  Double tap to unlock does not.

  Repeatingly pressing the alarm can't she.

  Arrow upward into the Messaging key does not send the message.

  so many questions usung this version.  How can I go down to v9

  so I can use my phone?

  # You can try some troubleshooting:

  1. Restart: press start/stop button until the Slide to Power Off slider appears, select Slide to Power Off and after it stops, press on On / Off button until the Apple logo appears.
  2. Reset: press the home and On / Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
  3. Restoration: connect your iPhone to iTunes on your computer, backup, and then select factory restore.

  I'm sorry, but Apple does not provide a path to downgrade to iOS. Because decommissioning is not supported by Apple we can treat it on these forums.

  You can leave comments at the Feedback from Apple.

• BlackBerry software mixing and Issues resolutions, I've found. (Mix & link does not then BBID connection errors)

  I spent a good amount of time a problem resolved with the latest version of the link & Blend (Setup file: BlackBerryDesktopSoftware_B98.exe) and I wanted to share my findings in case someone else is having similar problems.

  I have already installed 1.2.3.56 link and it worked fine with my Q10, I used it for access to remote files, sync and backup and everything worked perfectly.  BBID was able to manage a disconnect, connect to the application without problem.  When the passport was released I had planned to make one, so I tried to upgrade to the latest version of link being bundled with the installer of mixture.  That's where all my problems started...

  After numerous installs / uninstalls the best I could muster with the new version was a mixture executable that would end itself quietly (no paper anywhere) in the second run.  Only way to really see in taskmanager was to select in the browser and press the Enter key (this he launched hundreds of times, I was doing this while using the process monitor to see if a log file has been generated anywhere, I didn't expect that it remains running) in addition the link sat at its screen for a LONG time , and when he finally start step 2/3 has never worked.  This is the step where you enter your credentials BBID and it records the link your account BBID, whenever I came to this page, that he had a yellow triangle and a button 'Retry' which obviously did not help much.

  The link always took to connect is because PeerManager.exe had the same problem that Blend.exe did, he would go for<1 second="" and="" then="" terminate="" quietly="" on="" it's="" own="" with="" no="" logs="" of="" any="" kind. ="" when="" link="" is="" started="" and="" running="" you="" should="" see="" the="" peermanager.exe="" process="" running="" in="" your="" task="" manager,="" and="" of="" course="" it="" woudn't="" stay="" running="" for="">

  I had the debuggers and IDA to take a look at what was going on and what I found I hope it will help someone without having to make all the steps of this.  For what it's worth I've also call in support BlackBerry when I get my passport and to inform them of the issue, I came across.

  The short end of history / TLDR. I had to do 2 things to get this version of Blend / link not working for me: create a white 'openssl.cnf' file on my hard drive and point to it with the environment variable "OPENSSL_CONF".  Second question was about a value in "HKEY_CURRENT_USER\Software\Research In Motion" that he did not, I removed this entire key during a re - install, and now the BBID authentication page correctly.

  I'll add some additional notes on what I found in the next post...

  If someone is curious about what I found while debugging, this is what lead me to the library & it is OpenSSL configuration problem...

  While I was debugging, I changed a routine jump and was able to get executables to start.  The PeerManager.exe and the necessary mixture changes the code runs successfully. (suspicious code block was in the mix file libeay32.dll PeerManager.exe with link/Blend)

  Looking at these two very similar code blocks shown a string of text before the jump to 'leave' called, showing that the code path that displays the text string "Automatic Configuration failed." called when an error occurred.  Interestingly enough it is then the functions available are currently walked initterm (an internal function in MSVCRT100.dll) and if the executable is never a chance to sign anything before this happens.

  Seeing that I had a similar error message in both applications indicated that it was a common library that has been compiled with both applications.  So I went to google to find pages associated with this error message...  Looks like this is a common problem with libraries and compiling of data, but I was focused on how to work around the problem and I finally tried one of the hotfixes sugguested I found.   Here's an old bug report on OpenSSL which indicates it might be a problem with the availability of openssl.cnf and is:

  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=584911

  With the above information, I went to my system properties and set a System Variable, named "OPENSSL_CONF" and a value of "C:\openssl.cnf".  I then went to a dos prompt and make an empty file to this location using "COPY CON C:\openssl.cnf" (on the first line, I just recorded it with CTRL + Z) I then restored the binary no patches and low and behold, they worked very well!  Blend.exe started well to the top and Peermanager.exe were also still works just fine.  I couldn't BBID authentication window to come yet, but applications take at least now on my device and they actually open and created newspapers.

  MIX OF NOTES:

  Work with mixture problems not starting not leads believe me it is a problem compiling.  If I replace the OpenSSL library, it comes with (libeay32.dll and ssleay32.dll), with their installation package 1.0.1i binaries 'lite', Blend.exe starts fine.  Peermanager.exe can be fixed as well as libraries are statically compiled in this application.  Libraries have been restored for versions supplied with mixture once the environment variable has been confirmed for the problem.

  Auth BBID question:

  It was relatively easy to solve compared to the above question... Finally, there's something in my registry that has not been analyzed correctly as in 'Desktop.log' I found this article: ' | ERROR | 1. Rim.Desktop.Shell | 0 | Error to access the valid bbidprincipals. "I have exported and deleted everything under the 'HKEY_CURRENT_USER\Software\Research In Motion' key, restarted and voila!  I have now received a login for BBID.  Don't know which key it was that I didn't go back and add in each of the values I exported, but there was something in there, he did not like...

  Now I just need to see that this information back to the BlackBerry support group and eventually the Group of desktop software so that they make use.  When the Passport arrives I'll make sure to make a support call and get connected with them.  If anyone has any information to help get to the right people, let me know and I'll push it along.

  Otherwise, if this can help someone, give a post here so that we know that you are affected by this problem as well!  I still don't know which is more precisely on my system that requires him to need this empty openssl.cnf file.  A test VM, I installed it on had not and it works very well, so there is something else in my environment that causes this.

• iOS 8 YouTube bug. Issue.

  I noticed that YouTube files were not playing. Did a search on the forum and found the thread of the workaround. But I get this screen from Adobe Flash Player but the video playing within my portfolio of Adobe Content Viewer on my iPad. After I tap the screen. I went and Flash as well on my desk, thinking that I might have an older version installed. I use Safari.

  Any idea when this bug? No idea why I get this message? How can I remove it? I also noticed links YouTube integrated prior folios will not play.

  

  Why you are referencing the videos on YouTube? (Perhaps mistakenly), I assume that you own the content, and that you have access to the source files. Is the issue you want to have a giant folio because of the video?

  AutoPlay will not autostart the video. It will be autostart the Overlay, which will then call the YouTube poster frame. Apple requires that the video that is streaming in a superposition of web have a button "play me", so you force your reader to touch twice to start any video that is on YouTube, unless you autostart the Web Overlay. Office Viewer and Viewer iPad have different rules when it comes to video, and they have different abilities when it comes to Web content overlays. I always recommend that developers test on the desktop as a first pass, but that you can't count on that to prove how he gets your content on a device. The only way to know what will make your content on a device is to test it on a device.

  Another problem is that you use object > insert HTML code..., that you invoke when you paste the code from YouTube. While really interesting in theory, he introduced a few unintended consequences as a result the InDesign Webkit engine used to generate the preview. You see the warning Flash Player because you pasted the embed code. If you have saved your code in a text file and saved as video.html in its own folder, and then linked to it as a superposition of normal Web content, you wouldn't see the Flash warning. If you must continue to use the paste method, then you select the overlay and transparency set to 0 to hide the poster frame InDesign generates. You can then put any poster on top of the overlay (such as your tap of iconography of game (which I love, by the way...) and it will disappear when the player activates the video.)

  Know that on devices, DPS viewers rely on the operating system to render Web content. Accordingly, if the operating system changes (as he did this week in the case of iOS), your viewers Web can change their behaviors as well.

• ColdFusion 8 bug with GetPageContext () .forward)

  Hello
  
  I have a form that uses enctype = ' multipart/form-data' in a production server with Coldfusion MX 7 that works very well. But when I try to move the application to the Coldfusion 8 it hangs!
  
  This error only occurs when you are using GetPageContext () .forward () after submitting the form. We must use the advanced method after the submission (instead of using the < cflocation >) because we want to keep the status of the page.
  
  The exception we get is the following:
  
  Corrupt form data: premature end
  
  The error occurred in D:\Inetpub\wwwroot\LRNSystemMVC\test.cfm: line 3
  
  1: < cfif isDefined ('form.submit') >
  2: < cfscript >
  3: GetPageContext () .forward ('index.cfm');
  4: < / cfscript >
  5: < / cfif >
  
  It's the stacktrace of the error:
  
  java.io.IOException: corrupt form data: premature end
  to com.oreilly.servlet.multipart.MultipartParser. < init > (MultipartParser.java:169)
  to com.oreilly.servlet.multipart.MultipartParser. < init > (MultipartParser.java:93)
  at coldfusion.filter.FormScope.fillMultipart(FormScope.java:136)
  at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:428)
  (more...)
  
  
  You can reproduce the error with the attached code.
  
  Thanks in advance,
  Máiquel
  
  Form.cfm

  Apparently, the new update to Coldfusion 8 1 (8.0.1) solves the problem.

  I did a few tests with the code above and with a more complex and there is no other problem.

  I think that this bug can be marked as resolved.

  Kind regards
  Máiquel Melo Sampaio

• very bug and makes every thing els buggy

  I have a 2012 IMac with 8 GB of ram and processor of Intel Core i5 2.7 GHz. iMovie is so buggy I can barely do anything, it freezes and I have to rebut. Help, please. Ask me something

  IMovie has a few bugs, it is actually quite stable. Can you give us some details that causes app to freeze on your computer?

• Safari 9.0.2 and issue of HTML5

  I'm under El Capitan 10.11.2 and Safari 9.0.2. There's a plugin video silverlight which modernized with changes in the operating system in recent years. I sometimes watch a video in continuous which blocks or pads for periods of time, sometimes long periods. I read that ability of HTML5 is automatically included in Safari and it is the preferred option, but I can't find a prompt anywhere to push the browser using this ability for video streams. Of course, I can uninstall silverlight and its taking in. Anyone know if this is safe and resolve the issue please.

  Try to go on Safari, Preferences, security, Internet Plug-ins and uncheck Silverlight. Restart Safari and test.

• HP 8610 Pro: why don't still no button "Cancel printing" fast for the printer HP 8610 Pro? And issue of the queue.

  This printer prints so fast that he NEEDS an option button fast cancel to cancel a print job.  A quick solutions?

  Also, sometimes when printing from a web application, the printer displays a "printing spool" minutes before it actually prints.  Can it be sped up or cancelled?  Still, the X on the LCD screen does not seem to work. Any thoughts on these issues?

  @Avalon11,

  If it only happens when you print from the Web, it could be a number of things. Could you run printing HP and doctor Scan?

  You can also check and see if the Web browser that you are using requires some updates or try another browser.

  Any help?

• Report the operating system bugs and Gmail Plugin

  Quick question: Although there is a Jira for Java API questions etc, is there also a way where we can connect General bugs found in the BB OS and applications like GMail Plugin?

  RIM said to use the 'normal' ways, if I remember correctly to log non bugs. In other words; These forums, emailing RIM specifically, either by sending it to the company/person who wrote the program.

• After putting in the software disc, computer returned to "out of the box" settings, and issues with scrolling Touchpad and webcam.

  Original title: scrolling problem and webcam Touchpad

  I just got my laptop Dell Inspiron taken for repairs, a couple of weeks. He was brought back to me with a new motherboard and CPU. After putting in the disc of the software, my computer returned to its "out of the box" settings How can I get my touchpad to scroll again? I need to download some application to legislate again? My built in camera is not working more, should I download an app for that also?

  Hi Marissa,

  1. what exactly happen when you try to use the touchpad and built-in camera?

  2. you receive messages or error codes?

  3. are you able to use the other features/devices built on the laptop with no problems?

  This problem may occur if the touchpad and webcam drivers are not installed properly.

  I suggest to refer to the Dell Support website to install the latest version of the touchpad and webcam drivers for your laptop and find the issue.

  We may also refer to article and check if it helps to solve the problem.

  What to do when a device is not installed correctly

  Since you have repaired the laptop recently, you can also get in contact with Dell Support for assistance.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• BlackBerry Smartphones Google Maps, questions and issues

  So, today is the first time I used my gps on my storm, and my first opportunity to use google maps.

  Everything worked fine except a few things that made my trip to find a little difficult doctors Office and the pop up text that tells you which way to turn, Center of the screen about the location and map scroll.

  I used google maps in the past on my Moto Q, and if I remember correctly, I would have to press the #3 key to move to the next round.  I checked the Gmaps menu by pressing the BB button and there is no options in there, so I went to the screen by a click.  Sometimes he could work and advance to the next round, other times it should show a picture of the box or do nothing at all.

  I'm happy that Gmaps finally works with the storm, but I would suggest to google when the tower was filed, which automatically advances the text box for the next round.

  Everyone knows these issues, or has found a workaround?

  When you have a path (= a list of points), the application has no way of understanding, you pass by a point. If I rephrase what you want:
  "whenever you pass a point, you want an update so that the remaining path does not include the above"
  and rephrase so the application can run:
  "whenever you pass a point, you want the calculated again way to take into account your position."
  Since there is no way of knowing when that happens "all weather", necessarily becomes what you ask for:
  "update the path to destination in a frequent manner"

  It is of course possible, but very tedious for the device I guess. It is easier for a GPS device that has infinite energy (= powered by car).