ColdFusion 9 on IIS Windows Server 2012 R2 8

Similar Questions

• IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  This particular configuration is with Coldfusion 11. There is no errors in newspapers and the w3 service still works as are application pools. All websites and app pools run with transmission of authentication request.

  ColdFusion does not work with windows authentication and may be enforced as if reconfigured integrated instance to do this, if this isn't a matter of colfusion.

  Here is what I tried:

  1 I created a new user account with admin rights and disconnected and logged in as them and then make changes to the password on the server, and that didn't make a difference.
  2. I checked that all Web sites using the request pass through authentication.
  3. I checked that the application pool is also using the application-pass-through authentication.
  4. I looked to find errors in which case newspapers but don't see anything there either
  5. I also searched a failure in coldfusion logs and saw no more relevant here either, but I got colfusion running without IIS in any case.
  6. search of the roots of web for coded passwords hard and found nothing.

  If you have any ideas or any ideas let me know.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• ColdFusion 9.0.1 on Windows Server 2012 64-bit

  We are running CF 9.0.1 Server 2003 and are interested in our sites of migrating to a new server running 64-bit Windows Server 2012 and I tried to find information about compatibility. So far, all I could find is this article of https://forums.adobe.com/discussion/create.jspa#trigger_modal list known issues with ColdFusion on 64-bit operating systems. Can someone point me to documentation that would show more precisely if the CF 9.0.1 is supported server 2012?

  Specifically, I'd be interested to hear from someone who is actually running ColdFusion 9 (or any other version) the 2012 server which could provide suggestions and problems to watch out for.

  Thanks in advance,

  Ray

  Hi Ray,

  ColdFusion 9 no matter what version (SEE 9.0.0/CF9.0.1/CF9.0.2) is not supported on Windows 2012. We started to support the platform Windows 2012 ColdFusion 10 from. Hope this information helps you.

  Thank you

  Priyank

• Windows Server 2012 R2, R2 2008 update 12/08/2015 disabled asp classic download

  I have a Windows Server 2012 R2 and Windows Server 2008 R2 running native IIS.

  The web server allows downloading files using just classic asp... no plug-ins or third-party add-ins.

  The two servers installed updates 09/12/2012 off the capacity of the web server to download files using classic asp. The base for the download method was created by freeaspupload.net, who has since disappeared.

  I rolled back these updates and downloading files works again.

  I can't be the only one stuck with a legacy application that needs this feature.

  Anyone?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• BB 5.00 on Windows Server 2012

  I just set up a Server Windows Server 2012 and installed BB 5.00 to it.

  The installation went well and I was initially able to get the web page to display the main screen. When I click on one of the monitored items, he would meet a http404 error.

  I contacted support and they had me add all things IIS 6 management and check that I had the CGI/ISAPI restrictions and restart IIS and the BBServer. It corrected this problem.

  The second question I encounterd and didn't have to do it in 4.40 was I have edited and created a password for the file editcode, with a special character in it, and when I tried to change the configuration via the web page, it kept throwing an error.

  Well the fix for this was to add the NOTAMP to the seciong of the bbdef.cfg file RunOpt.

  Another discovery in v5.00 is that you must have if you plan to allow enable/disable ability has that you must edit and save the enadiscode with a password in it.

  Thank you

  Brian

  Additional items, that I learned today...

  If you are using Windows Server 2008 and higher (windows server 2012 in my case), you must explicitly create a rule in Windows Firewall incoming and outgoing for the TCP port 25 and port TCP 1984.

• Level broker for connections to windows server 2012

  Dear,

  I would like to know if there is any risk that the upgrade of the OS of the server holding the broker for connections, web access and management of the profile of windows server 2008 R2 to windows server 2012 or more to enable support of HTML5 connector? Please tell us what is the scenario for these updates.

  Concerning

  Hi Habibgha,

  Hoping to upgrade the OS on-site? It should work, but I don't know if it has been tested. Assuming that your infrastructure servers are virtualized, perhaps you could take a snapshot or clone this virtual machine and try in a lab environment?

  Or you can work on a step-by-step approach, the first stage being, if your current farm is 8.0.1 you can upgrade all roles on your current server on 2008 R2 for vWorkspace 8.5, then build a new VM with 2012 R2 and install IIS and access to the Web of vWorkpace role. Create a new vWorkspace site web access on the new server just for the connector of HTML5.

  I hope that helps!

  Thanks, Sam

• AUSST 4.0 on Windows Server 2012 R2 installation

  Hello

  I am installing AUSST on Windows Server 2012 R2 with IIS 8.5, although I can't get the thing to work!

  I followed the instructions to use the Adobe update (AUSST) server configuration tool if I do something wrong.

  All updates have been downloaded to the directory "c:\AdobeCloudUpdate" (a little more than 80 GB). I created a new web site in IIS to point to this directory as root and set the permissions to the local group 'IIS_USERS' read, list, etc.

  I followed the instructions to add the types of files for maps to the level of the server, changed the classic and set AppPool to update the 'C:\Windows\Microsoft.NET\Framework\v2.0.50727\config\web.config' file with the veriables add path to 5 file types.

  When you try to access the "updaterfeed.xml" of a client computer using the full URL of the "http://co-au-01.contoso.msft/webfeed/oobe/aam20/win/updaterfeed.xml", I get a XML page cannot be displayed error.

  

  I created a file of substitution of "AdobeUpdater.xml" and added this to a new package is created in Packager CC and deployed just Photoshop and Office CC application. When I load the soft CC I get a download error when you try to view the applications.

  

  I tried to change other web.config files not found on the Server IIS ("C:\Windows\Microsoft.NET\Framework\v4.0.30319\config") and also the v2 of .net and .net v4 in the 'C:\Windows\Microsoft.NET\Framework64', but no joy.

  I hope it's a very simple solution and just miss a step but little help would be highly appreciated.

  Thanks in advance,

  
  Tom

  Something I've discovered here is that you need to add a wildcard on the VAC/services/FAC file MIME type (more precisely the validation file), because the files of validation is not an extension so he threw back a 404 error.

  

  I hope it suits it for you!

• Cf11 install problem on WIndows server 2012 R2

  We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

  Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

  The problem is that any call to a model cfm results an error (html pages serve very well):

  Error HTTP 500.0 - internal server error

  The page cannot be displayed because an internal server error has occurred.

  Detailed error information:

  Module IsapiModule

  Notification ExecuteRequestHandler

  Manager cfmHandler

  Error 0x8007007f

  URL requested http://localhost: 80 / default.cfm

  Physical path C:\inetpub\wwwroot\default.cfm

  Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

  Solved the problem... it is not a problem of one CF but and especially an IIS problem...

  (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

  (2) restart

  (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

  (4) restart IIS and CF

  (5) Web Server Config set to 'all '.

  60 restart IIS and CF

  The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.

• CF 9 and Windows Server 2012

  The installer has announced will work for CF 9 as well, so that CF9 runs on Windows Server 2012?

  New supported platform for ColdFusion 10

  Adobe Announces Microsoft Windows 8 and Microsoft Windows Server 2012 platform support for ColdFusion 10. 10 ColdFusion windows installers have been updated to support new platforms. Installers can be downloaded from the ColdFusion 10 product downloads page.

  Last 10 ColdFusion Windows installers,

  1. Support of Windows 8 and Windows Server 2012.
  2. Support 8 Internet Services (IIS8).
  3. Include the JRE 1.7 update 15.
  4. Include ColdFusion 10 mandatory update.

  Important note: ColdFusion 8 of 10 update must be applied with the latest windows installer 10 ColdFusion. For more details refer to this article.

  CF9 not supported Windows 2012.

  http://wwwimages.Adobe.com/www.Adobe.com/content/dam/Adobe/en/products/ColdFusion/PDFs/Col dfusion9-support-matrix-4 - ue.pdf

  Odd Windows 2008 r2 is not on the list of support CF9 yet many people use this platform.

  HTH, Carl.

• ProBook 6560 b: wireless network drivers - R2 Windows Server 2012

  Would like to know if one got successfully installed Windows server 2012 R2 drivers. I try to install the drivers wireless for two days now and could not get their work. Any help would be really appreciated.

  Thank you

  Hello:

  I don't work for or represent HP.

  All I can advise is that HP offers no support or drivers for all windows server operating systems for any mobile business or consumer they ever made.

  With this track record, I doubt very much they will be.

  In addition, it would be Intel to release Windows Server drivers for their wireless cards, not HP.

  I've never seen a card driver wireless for windows server on the Intel Web site.

  Normally the equivalent standard windows drivers work on Windows server most of the time.

  For example: If you had installed Windows Server 2008 R2 on your laptop, wireless Intel W7 driver probably would work.

  But since there is no equivalent W10 driver for the wireless card model that your laptop is, I have a feeling that is the reason why the wireless card does not work.

  You may laugh with some of the advanced settings for the card under the Advanced tab in Device Manager to see if you can get the card to work.

  Enable WMM for example.

• Satellite C660 - 1 DG-drivers of Windows Server 2012

  I started Windows Server 2012 (for development purposes).

  Now... where can I find the drivers?

  * display driver *-lets start with the display driver (for the Intel Graphics Media Accelerator HD) when I look for the display driver in the support forum I only find the driver of Intel for Windows 7, but there is none yet for Windows 8? -Installed Windows 7 driver - works ok :)
  * sound driver * -.

  What drivers Miss do you?

  Fact is that Toshiba offers all drivers for supported operating systems.

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• T61 - Datacenter Windows Server 2012

  Hi all

  I need to install Windows Server 2012 Datacenter with Hyper-v installed on a Thinkpad laptop, because it is more durable compared to others, and I am planning buy Lenovo ThinkPad T61 with following specifications:

  Hello

  Looking system requirements here on the website of Microsoft, it seems that the T61 meets the system requirements to run Windows Server 2012, but it's largely because Microsoft does not seem to differentiate between the requirements for the Foundation, Essentials, Standard, and Datacenter editions.

  Personally, I would suggest to go with the bigger, more quick 2012-vintage (or most recent) laptop that I could find, for example a W520 or the W530.

  Kind regards

  Aryeh Goretsky

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)