Collect or not collect?

Similar Questions

• How can I create a chart that creates new series each year when the data are not collected on a daily basis?

  I collect numbers "occasionally" of my solar system and to create a standardized chart that shows that the generation on an annual basis, so I can compare fall in the fall of each year, etc..

  Because the information is not strictly 'daily' (just whenever I get to it), I don't know how it normalize for several years.

  For example, if I had

  Date - Kw/day

  15/01/10 - 14

  03/04/10 - 18

  18/04/10 - 17

  01/06/10 - 19

  21/09/10 - 15

  03/12/10 - 9

  07/02/11 - 13

  02/05/11 - 16

  17/08/11 - 18

  01/11/11 - 12

  02/11/11 - 12

  05/01/12 - 9

  04/06/12 - 12

  and so on.

  What I'd like to see is a line graph for each year from January to December with these datapoints on it. I have much more "incremental data" that I presented above, but it's on "random dates" during the last 8 years, and I'm just trying to see how each year compared to other years.

  To be at the front, I tried to understand how this in Excel as well, but he could not understand where the other.

  DRM for any tips/tricks/tips!

  Steve

  This might work for you...

  I placed your data in a table named "Data."

  Create a second (in this example, titled 'Table 1')

  

  In the table 'Table 1' months are in the first column and the first row (which is a header row) contains the years - add columns to add new year:

  B2 = if (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

  It's abbreviation dethrone select cell B2 and type (or copy and paste it here) the formula:

  = IF (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

  Select copy of cell B2

  Select the cells B2 at the end of F13, dough

  now select cells A2 through F13 and add a graphic (the XY scatter diagram)

  Add new year add one (or more) new columns for "table 1", then add the year to the top:

  

  Now alone, click the chart to activate the chart.  then click on the button 'change data references '.

  now, drag the data reference control handle to the right to add the new year to the table:

  

  You can add several years to the time, so you don't have to it very often

• Suddenly, my Thunderbird does not list the collected addresses and don't 'Always allow remote content' addresses.

  (1) under address book, used for the book of MAC OS X, as well as the collected addresses and a third list, I can't remember.
  Now it lists only MAC OS address book.

  "(2) if I click on"Always allow remote content"it won't let me click on 'OK', I think that it says in the top left corner" adds: "but gives me an empty list.

  Thank you!

  If I'm more mac savy you we're in trouble. The last Mac I used has a black and white screen and used the floppy 3 1/2 "

  See Troubleshooting in the Thunderbird Help menu, and then click the display folder of your profile (Thunderbird knows where he is, even if I'm not) the History.mab file is your collected addresses.

• GarageBand can not load more songs with VST (Korg Legacy Collection)

  Hello world

  until recently, I used Garageband and built a song with the KORG Legacy Collection, especially the WAVESTATION VSTs. In early April, I got an update to version 10.1.1 GarageBand and now GarageBand can no longer use the VST:

  Audio unit plug-ins cannot be used

  Unity Audio "WAVESTATION" could not be transmitted for your project and may need to be updated. Contact the manufacturer for an updated version or get help.

  The WAVESTATION plugin has worked with the old version of GarageBand 10.x, I propose to downgrade back Garageband. How this is done?

  Hello world,

  instead of a downgrade, I found a way to make the plugin once again. I had to run this command

  ln s ~/Library/Application\ Support ~/Library/Containers/com.apple.garageband10/Data/Library/Application\ Support/KORG /.

  And now everything works fine.

  Source:

  http://www.korgforums.com/Forum/phpBB2/viewtopic.php?t=94619 & highlight = garageban d

• Password Vault only works for collecting occasional site passwords. My Norton password safe worked very well but is not compatible with Firefox 4. I wish I had my Norton Password vault back or difficulty of Firefox.

  The password vault does not collect and save my password information regularly. I was not able to identify or determine why she collects some and other than just, it comes even to the top.

  It is Norton to fix their stuff. When you have the Norton Password vault installed, your passwords are stored in files of Norton not in Firefox - while Firefox is unable to access these data.

  http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-4-compatibility-hotfix-is-now-available/TD-p/428894

• Why I do not think my collection full of music on mac, but can be downloaded on my iphone6

  While the music of David Bowie in my music in iTunes search, I found that on my Macbook Air, I see that the last music 12 months then on the iPhone 6, I see my complete collection - I found that I already had the cd so does not need to buy them again, but I don't understand why I can't see the collection complete on my Macbook! Any help would be welcome.

  Hi [email protected],

  Looks on your Mac, you could have a setting to show only recent items for 12 months.   If this is the case, it is easy to fix.

  For example, if you currently sort your music by artist because you are looking at the music of David Bowie, you will see the artists category near the upper right of your iTunes window.  Click the arrow to the right of the word artists, and you will see an option to display "see the recently added."  According to your description above, it is the option selected "last year"?    If so, you can deselect this option in the view of artists.

  This option is not available in the view of songs.  (See image below).  That answer your question?

  Using the new iTunes

  To view your music by song, Album, artist, composer or Genre, click the current view under the search tool in the upper right. Context menu of other views is displayed. When you select one of the views in the menu, you will see an additional display options that you are now, like sorting by title or rating.

  

  Enjoy!

• Images not showing in moments, the collections or the years

  MacBook Pro 2.66 GHz

  Mac OS 10.10.5

  Pictures 1.0.1

  Images import from Apple Mail to all photo album, but not displayed in Moments, Collections or years. When I right-click (Ctrl-click) on the image in the photo album and select Show in the Moment, nothing happens. How can I get the images imported into Moments?

  In the library of Photos of the masters record shows the lower level folders by date (ex 16 June 2015) and the images contained in these files. Upgrade to Mac OS 10.10.5 records being titled 06, 08, 12 etc. for the month and every month folder contains lower level folders for the day of the month. The images are stored in the day of the month records. Different method to organize the main images would be the source of the problem?

  Which indicates a database corrupted - back up your library of Photos and then launch Photos while you hold down the option and command keys - repair the database

  And I strongly suggest that you stay out of the photo library - it is there no user repairable in and a simple, small error on your part it can damage

  LN

• I already sent my phone to apple service center I am able to ask the service center to fix at the service of my phone that I would not be able to collect my phone on the estimated time

  I already sent my phone to apple service center I am able to ask the service center to fix at the service of my phone that I would not be able to collect my phone on the estimated time

  I guess you can always contact them using the contact information they provided and ask them.  If they can you host or not is not something that anyone here can say.

• FieldPoint not production form wavelength or data collection properly

  Hello

  I just got a few thermcouples hung in my box of Fieldpoint so that I can start my troubleshooting program. Right now with how I wired things I want that file .lvm to collect a point of data by one second. For this reason, I put a delay of a second on the ground. For some reason any when I linked the fieldpoint, no data shows up on the waveform. Temperature is very good reading in MAX. There is also a loop to stop if it reaches the maximum value specified in the loop. Not only that, but the data is produced when it exceeds this ceiling, but just a point at the point where it stops... say yes it works for 6.5 seconds and exceeds the max, this is the maximum temperature at this time. In my view, that it will collect all of a second according to the needs.

  Please see the code and help.

  Thank you very much

  Tanya

  resolved, my WTM was outside of the loop as well as recording when the loop is complete. I still have trouble getting the data every second and created another post that I felt that it was lost

• 2 Zoo Tycoon: Ultimate Collection will not work?

  Hello

  I had first of all of Zoo Tycoon 2 and I installed and it has played without problems. Then I bought Zoo Tycoon 2: Ultimate Collection and installed (with no problems) and I played for a while now, probably almost a year. He used to run without any problems at all, but a few days ago, I put Zoo Tycoon: Ultimate Collection disc 1 to and clicked on play. I've been waiting for centuries, and nothing came so I clicked it again and he said "another instance of startup.exe is already running" I tried to restart my computer, but it came again. I searched on the internet it and it said to press ctrl + alt + delete and delete something, so I did that and tried to run again. This time came a different message: "Please insert the right CD-ROM, select OK and restart the application.". but the 1 disc is already in the drive. I tried this on the internet, and he says that the solution is to insert the correct disc, but I did it? There was also a solution to make a right-click on the icon, click Properties and change the compatibility mode to windows vista, or something, but this isn't an option on mine. I checked the compatibility on my computer and it says that the two Zoo Tycoon 2 + Zoo Tycoon: Ultimate Collection is not compatible, but it was compatible before and I never had this problem. If there is a solution that works, I would be really grateful

  Hello

  Follow the steps mentioned below and check if that helps.

   

  Method 1: Check if the computer or your system meets the minimum requirements for this game.
  http://www.Microsoft.com/games/en-us/games/pages/zt2ue.

  The method 2:game crashes or closes unexpectedly

  http://support.Microsoft.com/kb/303032

  Method 3: message error "Please insert your Zoo Tycoon CD-ROM" when you start Zoo Tycoon

  http://support.Microsoft.com/kb/833823

  4:Zoo Tycoon Solution Center method

  http://support.Microsoft.com/GP/cp_zootycoon_master#TAB0

• Zoo Tycoon 2 Ultimate Collection will not work

  I just bought the ultimate Collection of Zoo Tycoon 2 and installed on my Windows 7 computer. I tried to set the compatibility mode to run on Windows XP Service Pack 2 and also tried to run as an administrator. I even uninstalled and reinstalled and still does not work. Initially my desktop theme has changed to the generic (which most games do when they start to load) and then all of a sudden he would return to normal and nothing happened. But after the change in compatibility mode, it now gives me an error saying to insert disk 1... Of course, disc 1 is inserted exactly as it appears in the computer in the list of drive for drive E, my cd-rom drive. Of course, it was a waste of $40. I would like a refund please.

  For anyone interested, I got it works by setting the compatibility mode to Windows Vista.

  Right-click on the game .exe file, go to properties. On the Compatibility tab, check run this program in compatibility mode for:, and select Windows Vista from the selection menu.

• Windows Mail is not properly all my email collection

  Windows Mail is not properly collecting all my email - some messages show only an empty folder. I can identify the messages affected through my ISP and send them to myself, but it's really annoying and doesn't always work.  I was hoping it was a temparary glitch, but it happened for weeks. Can someone tell me how to prevent it. Thank you very much in anticipation.

  original title: windows mail empty folders

  You are the very welcome. Glad you had good results.

• Zoo Tycoon 2; Zookeeper collection does not work on my Windows vista Home Premium 32 bit?

  I just gotton this game and it will not install on my laptop!  The RAM is 3.00 GB.  I just deleted a ton of things so it has avaibible of memory. Each time, it starts to install for a few minutes and then tells me it can not read.  I searched a lot of things online but may not know how!  So, if you have an idea of what I can do please let me know! And also, does anyone know if zoo tycoon complete collection works? Ok thank you.

  Hello

  
  1. What is the full error message you get when you try to install Zoo Tycoon 2: Zookeeper collection?
  2 are you able to install any other games or applications?
  You can read the following article and check if it helps.
  Microsoft games: InstallShield Error Messages
  http://support.Microsoft.com/kb/910816
  See also:
  Articles on Zoo Tycoon 2
  http://support.Microsoft.com/zootycoon2faq
  Zoo Tycoon 2 does not start or you receive an error message: "another instance of startup.exe is already running.
  http://support.Microsoft.com/kb/968309
  For reference:
  Zoo Tycoon 2: minimum system requirements
  http://support.Microsoft.com/kb/889368

• Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device. Specifically, an audio book downloaded via Overdrive?

  Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device.  Specifically, an audio book downloaded via Overdrive?

  Hello
  
  1. what type of files are in the audio book? Could you provide me with the file extensions?
   
  If you delete the information or files audio books could not show some information. I wouldn't recommend allows you to delete the files. If you want to remove them, you can contact overdrive support.
  
  Hope this information helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I start the Director I get "the collection of files its not valid or its corrupted. A new empty collections file has been created ".

  I've been using Director windows 2.6 on my operating system from vista for several months.   I just did the upgrade to windows 7 and now I get this message.

  "The collection file is not valid or its corrupted." A new empty collections file has been created "."

  Then, it closes the program.

  I had to rename a file called FFDshow.ax to another program called Muvee AutoProducer 6.1 works but I do not see how would the file collections of this program.

  Help, please.

  Thank you...

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Can not collect logs SupportAssist

  Dear all,

  I tested by iDRAC DSET log collection,

  go tab devices Supportassist and checkbox R720 Server(managed by iDRAC) and send the system logs button.

  Watch messages "collection tool is not available.

  What is the problem? I'm already registered hosts and devicename/IP file can be solved.

  Hello

  "Collection tool is not available" here means one application software/viz DSET is not available.
  When you have tested DSET by iDRAC, who was from the same server SupportAssist?

  Can you send me a screenshot of the programs and features installed on the server SupportAssist?

  Additionally, make sure that all the connectivity tests work in SupportAssist. Connectivity tests lie in the upper right of the UI SupportAssist under your name of user or administrator.

  Please send us logs SupportAssist of ' C:\Program Files (x 86) \Dell\Dell integrated Support\logs "as well as the screenshot.

  Concerning
  Aniruddha S