Estimate the delay time when running

Similar Questions

• Can I use an antivirus on each of my hosts and guests at the same time when running a virtual environment on my PC?

  I have Windows 7 running on my main computer at present and that you have a virtual environment installed as an operating system on this computer very.

  I would like to know if I am able to run an internet security on my pc (Windows 7) host program and other internet security on my guest in my virtual environment operating system (pc windows 8)... at the same time.

  I ask this question because... I installed my OS of windows 8 in a virtual environment running inside my Windows 7 OS in order to familiarize yourself with the features of windows 8 and to test the compliance of windows 8 with various hardware components I use... to satisfy my curiosity before I migrate eventually completely to windows 8.

  Part of my tests would involve various software including Internet security applications.

  So the question is... I was able to save my virtual environment with an Internet security program, while having an Internet security program running in the host computer?

  PS my environments hosts and guests are not put networked with the exception of the common external drives and dvd burners. The plan being that the Internet security on my host computer program will have my analysis excluded virtual environment.

  Yes

  The systems are completely separated from each other, will not affect the different AntiVirus on another product.

  If you decide to test another Internet security program don't forget to completely remove the old version on the virtual machine

• measurement of the delay time to fall on the rise

  I use the PXI-5124 digitizer and development of codes in C++ to measure the time between the 2 channels.  I put the trigger on channel 0.   I need to measure the delay time of CH0 AMOUNTING to CH1 RISING, CH0 AMOUNTING to CH1 TOMBANT, CH0 FALLING RISING, CH0 TOMBANT to CH1 TOMBANT CH1.

  I encountered the following problems.

  1. when I tried inverted signals using the niScope_AddWaveformProcessing() function, I had to call NISCOPE_VAL_ARRAY_GAIN twice.  Second call with gin = 1.  Otherwise, the waveforms being feteched were not reversed.  This happened to both channels.  Here is the code I use.

  niScope_SetAttributeViReal64(session,"1",NISCOPE_ATTR_MEAS_ARRAY_GAIN,-1));
  niScope_AddWaveformProcessing (session, "1", NISCOPE_VAL_ARRAY_GAIN));
  niScope_SetAttributeViReal64 (session, "1", NISCOPE_ATTR_MEAS_ARRAY_GAIN, 1));
  niScope_AddWaveformProcessing(session,"1",NISCOPE_VAL_ARRAY_GAIN));

  niScope_FetchArrayMeasurement (session, "1", timeout, [channel] NISCOPE_VAL_ARRAY_GAIN, actualRecordLength, wave [channel], & wfmInfoPtr));

  Code that write the [vague] in a control file

  2. even if with above method to obtain a code reversed, I can't get a correct results of CH0 FALLS of CH1 RISING.   In addition, I don't know if the other delays are correct or not.

  Please see the attachment for the functions dgz_measure() and NI_DGZ codes::meas_delaytime();

  Other scalar measures seem ok.  I also tried the FFT, it should be ok too.

  What I've done wrong? Is there any sample code for the delay time?

  I checked the AdvancedMeasurementLibrary already.

  Hi, Jean Louis,.

  It works fine now.  He needs to call niScope_FetchArrayMeasurement after you set the attribute.  There is no need to call niScope_AddwavefromProcessing.  The niScope_FetchArrayMeasurement and niScope_AddwavefromProcessing will be peform the operation.  So if I called two of them, the operation will be twice.    Here is the code that works.

  niScope_SetAttributeViReal64(session,"1",NISCOPE_ATTR_MEAS_ARRAY_GAIN,-1));
  niScope_FetchArrayMeasurement (session, "1", timeout, [channel] NISCOPE_VAL_ARRAY_GAIN, actualRecordLength, wave [channel], & wfmInfoPtr));

  Thank you very much!

• Transitions is messed up the first time it runs

  In the following code when the need to register the button is pressed the transitions is wrong the first time it runs

  <? XML version = "1.0"? >
  <!-transitions\LoginFormTransition.mxml->
  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "
  xmlns:MX = "library://ns.adobe.com/flex/mx".
  xmlns:s = "library://ns.adobe.com/flex/spark" >
  
  <!-Application of the property of the class States sets the display States.-->
  < s: states >
  < name s: State = "default" / >
  < name s: State = "Save" / >
  < / s: states >
  
  <!-define the transition to animate the view state change. ->
  < s:transitions >
  < s:Transition fromState = "default" >
  < s:Parallel >
  < mx:Resize target duration = "{loginPanel}" = "500" / >
  < s:Wipe can feel = 'right' target = "{confirm}" / >
  < / s:Parallel >
  < / s:Transition >
  < s:Transition fromState = 'Registration' >
  < s:Sequence >
  < mx:Resize target duration = "{loginPanel}" = "100" / >
  < / s:Sequence >
  < / s:Transition >
  < / s:transitions >
  
  <!--> set the Panel container title based on the view state.
  < s:Panel id = "loginPanel".
  title = title of "Login". Register 'Registration' = >
  < s:layout >
  < s:VerticalLayout / >
  < / s:layout >
  < mx:Form id = "loginForm" >
  < mx:FormItem label = "username:" >
  < s:TextInput / >
  < / mx:FormItem >
  < mx:FormItem label = "password:" >
  < s:TextInput / >
  < / mx:FormItem >
  <!-add a TextInput control to the form to register view state. ->
  < mx:FormItem id = "confirmation" label = "" confirm: "includeIn ="Save">"
  < s:TextInput id = "Myti(nose)" / >
  < / mx:FormItem >
  < mx:FormItem direction = "horizontal" >
  <!--> use of the LinkButton to the register view state.
  <! - exclude the LinkButton to the register view state. - >
  <!-add a LinkButton to the shape of the State of registry view. ->
  < mx:LinkButton label = "Return to Login.
  includeIn = "Save."
  a click = "currentState =" "/ >
  < mx:Spacer width = "100%" id = "spacer1" / >
  <!--> SETTING label of the control based on the view state.
  < mx:LinkButton id = "registerLink".
  includeIn = "default".
  label = "Need to register?"
  a click = "currentState = 'Register'" / >
  < s:Button id = "loginButton".
  label = "Login" label. Register = "Save" / >
  < / mx:FormItem >
  < / mx:Form >
  < / s:Panel >
  < / s:Application >

  Looks like this could be the bug: http://bugs.adobe.com/jira/browse/SDK-28787

• Add items to the combo box when running

  In my program, I want to add int '34' "43", "17"... and let the user choose one of them to the drop-down list box. How can I add items to the combo box when running. Create a property node 'String [] '? I try that, but its screen is "3443". I want to display as "34".

  43

  17

  See attached extract

  

• Edit the Resource Bundles when running

  Hi all

  I use JDeveloper 11.1.2.4.0, I created a model project and resource bundle option a Bundle by file then I set the label in the Councils of the user interface for each attribute of the Entity object.

  My client wants to be able to change the feature across the screen attribute labels.

  is it possible to edit the Resource Bundles when running?

  Kind regards

  See if this series of blog posts can help you: https://technology.amis.nl/2012/08/15/live-update-of-resource-bundle-from-within-running-adf-application/

  Dario

• My computer crashed when I was in Lightroom 5.7 and I can't on it comes back with a message will attempt to fix the next time it runs, but how it can with this message is blocking it.

  My computer crashed when I was in Lightroom 5.7 and now a message appears it will try to fix it the next time it starts but how it will launch when this message is blocking.

  Go to the same folder as your catalog file, find a subfolder whose name ends with Previews.LRDATA. Delete the subfolder Previews.LRDATA. Do not remove anything else.

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M

• So, for the 3rd TIME WHEN I REQUEST SUPPLICANT why NOT update only FF updated my browser?

  You see, I ask myself this same question twice before, because Firefox has once more for the third time last updated browser DESPITE MY PLAIDANT ASK TWICE BEFORE NOT to DO SO. but now I have a platform to make public DISHONESY of Firefox, put to task for defying a very adamant demand, specifically NOT UPDATE MY BROWSER, CIRCUMSTANCES THAT systematically, repeatedly occurred throughout all these years I've been with Firefox since 2005.

  How is it that Firefox continues to deliberately defy, ignore the wishes of its customers most loyal me inflamed beyond words, when I repeatedly made KNOWN QUITE WELL NOT to HAVE MY BROWSER updated.

  BUT NOW, AFTER ALL THIS TIME, TOGETHER WITH THE INSIGHT I HAVE RUN AS ONE INDUSTRY COMPUTER SPECIALIST I know very well why Firefox CONTINUES THIS PRACTICE WITH ABANDON.

  1. they do not like anyone was sleeping with the subject: config (then why did you never included it in the first place) as I do.

  2. they don't like anyone made modules incompatible extensions again as I do.

  3. they do not like someone tampering Firefox as I do.

  And all Firefox should do to reduce to nothing all the meticulous work I spend change about: config. configurations to accommodate my own and the needs of my company and all the hard work. spend time of activation of newly incompatible extensions, I need to work as effectively as possibleamong other things that I tweaked, THAT I EXACTLY WHAT YOU DO for THE REASONS I GAVE. YOU deliberately, to DO so hatefully. And that's the final reason for YOUR contempt total without taking account of the request of a customer. In addition, YOU, fIREFOX feel that since you wrote the code, and the owner of the code, YOU can insist USERS to follow the protocols of Firefox exactly as I ask.

  Another example of YOUR dictatorial to browse the web - what approach YOU feel that no one should dare to take a peek to content that is not the level of WHAT YOU BELIEVE IS purity AND ALL OTHER CONTENT CORROMPRE THE MORALS OF OUR YOUTH.

  In one of the cases where my browser has been updated despite my unyielding position against it, someone in YOUR ORGANIZATION has removed several sites for adults STRICTLY STRAIGHT to my favorites.

  SO now, NOT ONLY DO you HAVE AN ATTITUDE INTRUSIVE big BROTHER THAT NOBODY DARE DEVIATE FROM the OFFICIAL FIREFOX BROWSING PROTOCOLS BUT NOW YOU have put in PLACE A CENSURER CAMPAIGN ON WHAT YOU CAN READ, WATCH at all SIMPLY BOOKMARK or.

  BUT IT IS EVEN WORSE, MUCH WORSE. THE LAST TIME TWO YOU UPDATED MY BROWSER AGAINST MY WILL, YOU GAVE ME THE REASON MORE LAME MORE STUPID, INSULTING, STUPID WHY YOU UPDATED TWICE BEFORE AS IF THEY WERE JUST CIRCUMSTANCES THAT OTHERWISE NEVER WOULD HAVE VIOLATED AS WELL AS THE PRIVACY BEING THE TERRIBLE REBEL COMMERCIAL PRACTICES, ARROGANT AND SIMPLY TO YOUR MITIGATING CUSTOMER. BUT NOW IN ADDITION TO PROVE YOURSELF TO BE A MEGALOMANIACAL SOCIOPATH YOU HAVE REVEALED YOURSELF TO BE ABSOLUTE LIARS CHRONICLES.

  AND IT OF BECAUSE I AM RESPONSIBLE FOR MY COMPUTER SERVICE COMPANY AND HAVE A LOT OF COMPUTERS UNDER MY CONTROL AND SUPERVISION. I HAVE ONLY RECENTLY PASSED ON SOME OF OUR COMPUTERS FROM IE TO FIREFOX AS A TEST AND I AM DEPRIVED OF WHAT HAPPENED BETWEEN THE COMPUTERS THAT WERE USING FIREFOX AS A TEST STUDY.

  AND WHILE THE TRUTH BEING WHAT IT IS, YOU ARE CAREFUL NOT TO MESS WITH MY BROWSER, AS IT IS WELL CONFIGURED TO NOT UPDATE, WHICH, IN YOUR HONOR, YOU GAVE HIM A LARGE DOCK, BUT YOU GRIMLY UPDATED SIX COMPUTERS THAT WERE PART OF OUR TEST STUDY
  WHO HAD THE SAME CONFIGURATION OF BROWSER REQUEST NOT TO BE UPDATED BUT THAT YOU UPDATED HOWEVER. THESE COMPUTERS WERE PART OF A STUDY OF PRODUCTIVITY WHICH, BY UPDATING IT SET ALL THE SMALL EXPERIENCE OF OUR BACK A LITTLE BIT.

  SO, WHAT AM I GOING TO DO WITH YOU? I HAVE TO REALLY THINK LONG AND SERIOUSLY ON HOW TO RESPOND TO AN ORGANIZATION THAT HAS SHOWN NOTHING BUT THE WORST KIND OF APATHY, PRACTICES DISHONEST COMMERCIAL I'VE SEEN SINCE BEING IN THE COMPUTER SECTOR.

  Automatic updates can sometimes damage the files in the profile, and I always read several web for a complaint indicating that it has not changed. This is one of the reasons why I don't like the automatic updates.

• The delay time indicator

  This should be the easiest thing to do, but I'm stuck for some reason any: I have a delay time running to a number specified by the user in seconds, and I want an indicator on the front panel, showing how much time passed. I thought that the "elapsed time" VI would be exactly what I was looking for, but I can't seem to get to do what I want. I have attached my attempt; If you can remember where I'm wrong, it would be much appreciated.

  You do not have a while loop, so your code runs only once.

  Your delay time runs in parallel with the timed.  So, it will delay the execution of the code.

  Get rid of the elapsed time and elapsed time and its indicator in a loop.

• Derives from the system time when calling OR-Motion screw on PXI controllers

  Hello

  Just an email to avoid others wasting time when they are facing in this fantasy bug:

  We use PXI systems with Controllers NI PXI running Windows 7 and the 7340 family cards (PXI-7344). We have noticed that when the calls when it's through screws OR-Motion to question the different registers of the State (e.g. position, ADC value, general axis or the reference state) axis, the (Windows) system clock runs FASTER either. OR-Motion calls most are performed per second, faster windows clock works. When you get into the status for 4 axes 10 times per second (lines 100 ms rate), the drift is greater than 5%!

  I include here an example of program that reproduces this behavior.

  It is an essential question, for example if save you data with or from the timestamps, and it gets even worse if Windows is configured to periodically synchronize its own clock to a server via the NTP Protocol (it's how we noticed this problem in the first place). In this case, you see large discontinuities in your data every once in a while. Our systems must be running automatically and record data continuously throughout the year, so this bug is a real challenge.

  People at NOR been able to reproduce this bug too and are working on it (no idea of any CAR # yet). Note that this problem has not been seen on a DC non - OR Office running Windows 7 64 bit...

  The exact configuration is the following:

  Chassis PXI-1036

  PXI-8101 (or PXI-8102 on another system) controller

  4 PXI-7340 axes into the Groove 4, no physical connection for this test

  (PXI-6221 in slot 2, not used in this sample program)

  Windows 7 Enterprise SP1 32-bit English

  LabVIEW 2011 SP1 32-bit English

  OR-Motion 8.3

  2.6.2 PXI platform services

  (all software OR additional distribution 2012 DS1)

  Controller BIOS: improved 1.3.1 to 2.0.1f0, problem given the two versions of the BIOS

  I'll try to post here as soon as we receive news of NEITHER.

  Kind regards

  Vincent

  Hi all

  I wanted to let you know that the driver OR Motion 8.4 coming should solve this problem.

  Best regards

• help, the pc crashes when running a game

  Hello

  every time when I play a game, after 30 minutes + / my screen goes black and nothing seems more answers (except Skype continues to operate)
  After reset pc I get this message
  BCCode: ea BCP1: 89B99C80 BCP2: 89C9A450 BCP3: 8A5EA9D0

  BCP4: 00000001 OSVer: 5_1_2600 SP: 3_0 product: 768_1
  When it was held that it did not prevent
  all my drivers are up to date
  I have installed windows XP (32-bit)
  My system configuration:
  CPU: AMD Athlon 64 X 2 6400 + @ 3200 MHz

  RAM: 4096 MB (4 x 1024 DDR2-SDRAM)

  Video: NVIDIA GeForce 8800 Ultra
  Motherboard: MSI 790 x chipset
  my search did not get me anywhere if any help would be great

  Hello

  This problem occurs if the graphics card is taken in an infinite loop while waiting for the video hardware to become idle. This may indicate that there is a problem with the video hardware or that the graphics card cannot program the hardware correctly.
   
  I suggest that you follow the methods described in the Microsoft KB articles and check:

  Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER".

  http://support.Microsoft.com/kb/293078

  Error message "Stop 0x000000EA" when you run video-based programs

  http://support.Microsoft.com/kb/314215

• Interportlet communication for the portlet added when running in thewebcenter

  Hi all
  We have two portlet based on two ADF workflows.
  We add these two portlet on our page during execution using the web space...
  I mean, dynamically, we add these portlet on my page when running.
  given that we do not have any page design time that can hold these two pages together so
  as per my understanding between these two communication portlet is not possible by using the contextual action (using the producer and consumer).
  Anyone may provide some pointer how to facilitate inter portlet communication in this case.
  Any prompt response is appreciated.
  
  Thank you
  
  Riko.

  I adjusted finished my first version of the draft of the white paper.
  It still needs some work, but it contains most of the data. It's more than I thought, but that again, I have added a lot of information on how to create portlets adf from scratch, so you can use this white paper as a tutorial to create portlets adf.

  If you have any questions, please let me know if I can include additional information in the white paper.
  You can find the project here:
  http://www.contribute.be/c/Document_Library/get_file?UUID=436efbdd-1db0-4d44-b679-daf9995edca5&&GroupID=10234

  Published by: Yannick.O on September 5, 2010 16:47

  Published by: Yannick.O on September 6, 2010 08:14

• Satellite L500-1XD - why the screen jump when running on batteries?

  I recently bought my L500 and it works very well when it is connected to the electric network, but when I running on battery the screen jumps and flickers.
  I was told to look at the BIOS but that seems fine.

  Any ideas?

  Thank you
  Kate

  Jumps and flickers?
  The same happens when you use different power management?

• Screws disappear from the windows taskbar when running

  Hello!

  It is a strange happening in the world when running LabVIEW 2014 or 2015 on Windows 7.  When the VI property-> the appearance of the window-> Custom-> customize-> box 'allow to minimize the user window"is unchecked the VI disappears from the taskbar when running.  It is moderately annoying, anyone know if there is a good reason for this behavior without papers?  Other than to keep the box checked, is there another way to prevent that from happening? I don't really feel like swapping through all possible combinations. :-)

  Thank you!

  C

  In fact, it's documented behavior.  Access the help file for this dialog box properties.

  There is a note that says: