Collecting Table statistics get error ORA-20001 and ORA-06512 on 11g

Similar Questions

• When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle

  CARS: 2 nodes with Oracle single Client Access name (SCAN)

  OS: OEL 5.4 64-bit

  Version: 11.2.0.3

  When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).

  servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))

  serviceBD service

  SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;

  METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS

  ---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----

  serviceBD BASIC SELECT 180 NO LONG YES

  But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  Or

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  I have also observed the following (cluvfy).

  1 all LISTENER_SCAN running node 1

  2 there is no TCP connectivity

  3 the error message is obtained PRVF-5713

  [grid@rac1 ~] comp cluvfy $ scan - verbose

  Check scan

  Checking the single Client access name (SCAN)...

  ANALYZE the running node name?      ListenerName Port running?

  ----------------  ------------ ------------  ------------  ------------ ------------

  scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1

  Checking TCP connectivity to ANALYZE listeners...

  Node of ListenerName TCP connectivity?

  ------------ ------------------------  ------------------------

  RAC1 LISTENER_SCAN1 no

  RAC1 LISTENER_SCAN2 no

  RAC1 LISTENER_SCAN3 no

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  Check the resolution settings of name to 'scanvip.domain1.local '...

  SCAN the IP address status comment name

  ------------ ------------------------ ------------------------ ----------

  scanvip.Domain1.local 10.210.2.18 spent

  scanvip.Domain1.local 10.210.2.19 spent

  scanvip.Domain1.local 10.210.2.17 spent

  Verification of the installation program ANALYZES VIP and the listener has failed

  The analysis check failed on all specified nodes.

  Could someone help me please.

  The solution was to restart scan_listener.

  srvctl stop scan_listener

  srvctl start scan_listener

• I get errors MxTray.exe and can not understand why. This error appears randomly.

  I get errors MxTray.exe and can not understand why. This error appears randomly.

  Hello thunder1948m

  Do a search on the internet suggest that the MxTray.exe could be a malicious virus that contains malicious programs.

  If you are not running currently a virus scanner, you can download Microsoft Security Essentials for free. It offers protection in real time and protects against software viruses, spyware and other malicious software.
  You can download here.

  I hope this helps.

• Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

  Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

  Hello!

  the mechanic system?
  It's what has helped us to

  Open Notepad.

  Copy the following into Notepad and save it as fixme.reg

     push all the files and then save it to your desktop.

  Windows Registry Editor Version 5.00

   

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  Go to your desktop and double-click the file name fixme.reg

  Restart the PC and try to install the updates again

  or

  Click Start.

  Type regedit in the search field and press to enter.

  On the registry change windows click on file and select import.

  Navigate to the location where the fixme.reg file and select the file.

  Click ok on the windows screen once the registry is merged successfully.

  Restart computer and check if updates installs.

  * We had system mechanic and I uninstalled it since I discovered that it corrupted my windows installer.

  Hope this helps

  Microsoft KB article

  http://support.Microsoft.com/kb/2642495

  Thank you!

  Makoi

• I have 4 important updates that must be installed, but get errors 9 48 and 643

  I have 4 important updates that I tried to install for over a week now and I keep getting error 9 48 and 643 codes every time. Can someone help me please? I searched the internet for solutions and I ran the microsoft fix it solution but nothing seems to work.

  Hello

  1. who is your provider of mail service?
  2. What is the accurate and complete error message you get?
  3. what version of Internet Explorer is installed on the computer?

  Method 1
  For issues with the updates, I would suggest to perform cleanup starts, then download and install the updates.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Update of security for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista and Windows Server 2008
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29836

  Update of security for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista and Windows Server 2008
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29403

  Update of security for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista and Windows Server 2008
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29811

  Download Internet Explorer 9
  http://Windows.Microsoft.com/en-us/Internet-Explorer/downloads/IE-9/worldwide-languages

  Method 2
  For logging in email questions, I suggest you try the steps from the following link:

  The problems of access to webmail using Internet Explorer
  http://support.Microsoft.com/kb/2483955

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 3
  If you still have questions, then I suggest you to perform place-update.

  Note: When you perform in place--update, you need to backup all your data. Disconnect all external devices.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099

• Since I was re - install Windows on a new computer only. I am more able to do the updates a day. I get error code 42 and 49

  Since I was re - install Windows on a new computer only. I am more able to do the updates a day. I get error code 42 and 49

  Error 42 and 48 https://forums.adobe.com/thread/1893316

  Error 49 https://forums.adobe.com/thread/1491394 and https://forums.adobe.com/thread/1353632

• Get error - ora-01003 no instruction not analyzed

  Hello
  
  I customized a form and added under request for insertion trigger before Friday. For the last 4 days that it was working fine and now if we try to save this form, we get the error "ora-01003 no instruction not analyzed.
  
  Below you will find the query added in the prior insertion trigger: -.
  
  DECLARE
  BEGIN
  INCIDENT_TRACKING_LIB. Pre_Insert;
  Q_TXN. Event ('PRE-INSERT', ' INCIDENT_TRACKING');
  INSERT INTO cmw_bc_mobile_number select: incident_tracking.account,: INCIDENT_TRACKING. Error_code, double SYSDATE
  WHERE does not exist (select * from cmw_bc_mobile_number)
  where customer_number =:incident_tracking.account);
  END;
  
  Please can someone help me solve this problem.
  
  Kind regards
  REDA

  did you change the tables involved?

• Collect table statistics take longer for large tables

  Version: 11.2
  
  I noticed brings his stats (via dbms_stats.gather_table_stats) takes more time for the large tables.
  
  As number of rows must be calculated, collection of statistics on the table a big would naturally be a little longer (running COUNT (*) SELECT internal).
  But for a table not partitioned with 3 million lines, it took 12 minutes to retrieve the stats? Outside the County info and the row index what other information is collected for the table stats gather?
  
  Size of the Table is actually important for the collection of statistics?

  USER_TABLES DESC

  and also

  USER_IND_STATISTICS
  USER_PART_COL_STATISTICS
  USER_SUBPART_COL_STATISTICS
  USER_TAB_COL_STATISTICS
  USER_TAB_STATISTICS
  USER_TAB_STATS_HISTORY
  USER_USTATS
  USER_TAB_HISTOGRAMS
  USER_PART_HISTOGRAMS
  USER_SUBPART_HISTOGRAMS

• Using DBMS_METADATA. GET_DDL get error: ORA-00907: lack the right parenthesis

  Hello
  
  I try to extract the schema DDL to a base (10.2.0.4.0 - 64-bit Enterprise Edition on Solaris 10). I ran the query below and get an ORA-00907: parenthesis right absent error.
  
  SELECT DBMS_METADATA. GET_DDL (REPLACE(object_type,' ','_') AS object_type, object_name) FROM user_objects WHERE object_type NOT IN ('TABLE_PARTITION', "INDEX_PARTITION", "LOB");
  
  This is the output when executing the above in the sqlplus worksheet
  
  Select DBMS_METADATA. GET_DDL (REPLACE (object_type, ", '_') as object_type, object_name) FROM user_objects if object_type in ('TABLE_PARTITION',"INDEX_PARTITION","LOB")
  *
  ERROR on line 1:
  ORA-00907: lack of right parenthesis
  
  remove the where the clause gives the following:
  
  Select DBMS_METADATA. GET_DDL (REPLACE (object_type, ", '_') as object_type, object_name) FROM user_objects
  *
  ERROR on line 1:
  ORA-00907: lack of right parenthesis
  
  Pointers would be welcome. I know I could get the DDL using exp/imp, but I'd like to understand why I get the error of missing parenthesis.
  
  see you soon,
  
  Ewan

  SELECT DBMS_METADATA. GET_DDL (REPLACE(object_type,' ','_') AS object_type, object_name) FROM user_objects WHERE object_type NOT IN

  You don't need an alias here. Getting rid of the "as long as object_type' and it should work.

• Oracle on the SQL Server tables dblinked query error ORA-00904

  Hello
  
  I created a dblink to a SQL from Oracle database using generic connectivity.
  The following query returns the error ORA-00904 invalid identifier in the (tblEmp.Empno) WHERE clause
  
  SELECT 'EmpNo', "EmpName", "DeptName".
  OF tblEmp@sqlserver.
  tblDept@sqlserver
  WHERE tblDept.DeptNo = tblEmp.Empno
  
  I had to include the column names between double quotes because of the case review of the columns, but I can't do the
  same thing for the WHERE clause.
  
  (1) so how can I fix this error?
  (2) also how can I include the Deptno column with the table alias in the columns list?
  (Deptno is ambiguous in the Emp and Dept tables)
  
  Kind regards
  Sam

  Looks like you have case-sensitive column names, try this

  SELECT "EmpNo","EmpName", "DeptName"
  FROM tblEmp@sqlserver e,
  tblDept@sqlserver d
  WHERE d."DeptNo" = e."Empno" --<--- are you sure this is the correct join condition
  

  What should we not

  WHERE d."DeptNo" = e."DeptNo"
  

  Published by: Alex Nuijten on September 22, 2009 13:28

• Since the installation of service pack 1 to install pack antivrus on my laptop when I download updates windows I get error codes (80072EE2) and (8024402C) how to fix this?

  Since I installed the service pack 1 of windows on my laptop to install antivirus 2012 pack that I can no longer download updates windows. How can I solve this problem?

  I get error codes 80071EFE.  80072EE2. 80200010.

  Hello

  Perform the steps in the article mentioned below and check if the problem persists.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  Hope this information helps.

• Get error 80072745 code and cannot access the Messenger. All solutions

  My question is simple... I can't access Messenger, either through my account or web access.  I either get error 80072745 or I see loading forever program.  I can't even to check the options or paly with parameters.

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Help me solve pls error ORA-06512

  I create a full dump of database with the following command:
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  expdp %DB_USERNAME%/%DB_PASSWORD%@%TNS_ALIAS% full = Y CONTENT = all THE directory = % ORADMPDIRNAME % % DMP_BKP_FILENAME % logfile LOGFILE = % = dumpfile
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  But when I try to created import dump file, with the command:
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Impdp %DB_USERNAME%/%DB_PASSWORD%@%TNS_ALIAS% full = Y CONTENT = all THE TABLE_EXISTS_ACTION = REPLACE directory = % ORADMPDIRNAME % % DMP_BKP_FILENAME % logfile LOGFILE = % = dumpfile
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  I get the following in my console error:
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  ...
  Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, PRE_SYSTEM_ACTIONS, PROCACT_SYSTEM
  ORA-39083: Type as procact_system cannot be created with the object error:
  ORA-01843: not one month valid
  Because sql is:
  BEGIN
  If (system.wm$ _check_install) then
  return;
  end if;
  start to run immediately ' insert into wmsys.wm$ workspaces_table
  values ("LIVE",
  '''',
  ''0'',
  '''',
  ''-1'',
  '''',
  "' SYS
  Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, POST_SYSTEM_ACTIONS, PROCACT_SYSTEM
  ORA-39083: Type as procact_system cannot be created with the object error:
  ORA-06550: line 2, column 93:
  PLS-00302: component 'OPERATOR_NONE' must be declared.
  ORA-06550: line 2, column 1:
  PL/SQL: Statement ignored
  Because sql is:
  BEGIN
  dbms_server_alert.set_threshold (2104, dbms_server_alert.operator_GT, '1200', dbms_server_alert.operator_NONE, ", 1,3, 'ias', dbms_server_alert.object_type_SYSTEM,"); COMMIT; END;
  DATABASE_EXPORT/SCHEMA/PROCACT_SCHEMA processing object type
  DATABASE_EXPORT/SCHEMA/TABLE/TABLE processing object type
  ORA-39126: worker unexpected fatal worker error of $ MAIN. PROCESS_TABLE_EXISTS_ACTION [TABLE: 'IX'.] ["" AQ$ _STREAMS_QUEUE_TABLE_T ']
  ORA-24019: QUEUE_TABLE identifier too long, should not exceed 24 characters
  ORA-00955: name is already used by an existing object
  
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
  ORA-06512: at "SYS." "MAIN$ WORKER", line 6266
  
  -PL/SQL call stack-
  the line object
  serial number of handle
  14916 package body SYS 3069F2A0. MAIN$ WORKER
  3069F2A0 6293 SYS package body. MAIN$ WORKER
  3069F2A0 11663 SYS package body. MAIN$ WORKER
  3069F2A0 SYS 12429 package body. MAIN$ WORKER
  3069F2A0 11969 SYS package body. MAIN$ WORKER
  3069F2A0 3278 SYS package body. MAIN$ WORKER
  3069F2A0 6882 SYS package body. MAIN$ WORKER
  3069F2A0 1259 SYS package body. MAIN$ WORKER
  2D7B6B4C anonymous block 2
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  short failure message:
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  ...
  ORA-31684: SEQUENCE object type: 'GMT_META '. "' MD_ERRORSEQ ' already exists
  ORA-39083: Type LIBRARY THAT could not create object error:
  ORA-39083: Type as procact_system cannot be created with the object error:
  ORA-39083: Type as procact_system cannot be created with the object error:
  ORA-39126: worker unexpected fatal worker error of $ MAIN. PROCESS_TABLE_EXISTS_ACTION [TABLE: 'IX'.] ["" AQ$ _STREAMS_QUEUE_TABLE_T ']
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  in my D:\oracle\product\10.2.0\admin\ias\bdump\alert_ias.log:
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  ...
  WARNING: drop table queue: SYSMAN. Dictionary _MGMT_NOTIFY_QTABLE_T AQ$ does not exist
  WARNING: drop table queue: will try to move the table to the queue and other paintings, IOT, rules, rulesets associated queue table by force
  WARNING: drop_queue_table: no evaluation for the queue table: SYSMAN. AQ$ _MGMT_NOTIFY_QTABLE_T
  WARNING: drop table queue: SYSMAN. Dictionary _MGMT_NOTIFY_QTABLE_H AQ$ does not exist
  WARNING: drop table queue: will try to move the table to the queue and other paintings, IOT, rules, rulesets associated queue table by force
  WARNING: drop_queue_table: no evaluation for the queue table: SYSMAN. AQ$ _MGMT_NOTIFY_QTABLE_H
  WARNING: drop table queue: SYSMAN. Dictionary _MGMT_NOTIFY_QTABLE_G AQ$ does not exist
  WARNING: drop table queue: will try to move the table to the queue and other paintings, IOT, rules, rulesets associated queue table by force
  WARNING: drop_queue_table: no evaluation for the queue table: SYSMAN. AQ$ _MGMT_NOTIFY_QTABLE_G
  WARNING: drop table queue: SYSMAN. Dictionary _MGMT_NOTIFY_QTABLE_I AQ$ does not exist
  WARNING: drop table queue: will try to move the table to the queue and other paintings, IOT, rules, rulesets associated queue table by force
  WARNING: drop_queue_table: no evaluation for the queue table: SYSMAN. AQ$ _MGMT_NOTIFY_QTABLE_I
  WARNING: drop table queue: IX. AQ$ _ORDERS_QUEUETABLE_T dictionary does not exist
  WARNING: drop table queue: will try to move the table to the queue and other paintings, IOT, rules, rulesets associated queue table by force
  WARNING: drop_queue_table: no evaluation for the queue table: IX. AQ$ _ORDERS_QUEUETABLE_T
  WARNING: drop table queue: IX. AQ$ _ORDERS_QUEUETABLE_H dictionary does not exist
  WARNING: drop table queue: will try to move the table to the queue and other paintings, IOT, rules, rulesets associated queue table by force
  WARNING: drop_queue_table: no evaluation for the queue table: IX. AQ$ _ORDERS_QUEUETABLE_H
  WARNING: drop table queue: IX. AQ$ _ORDERS_QUEUETABLE_G dictionary does not exist
  WARNING: drop table queue: will try to move the table to the queue and other paintings, IOT, rules, rulesets associated queue table by force
  WARNING: drop_queue_table: no evaluation for the queue table: IX. AQ$ _ORDERS_QUEUETABLE_G
  WARNING: drop table queue: IX. AQ$ _ORDERS_QUEUETABLE_I dictionary does not exist
  WARNING: drop table queue: will try to move the table to the queue and other paintings, IOT, rules, rulesets associated queue table by force
  WARNING: drop_queue_table: no evaluation for the queue table: IX. AQ$ _ORDERS_QUEUETABLE_I
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  My settings:
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  SQL > select * from v version $;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - production
  PL/SQL version 10.2.0.3.0 - Production
  CORE Production 10.2.0.3.0
  AMT for 32-bit Windows: Version 10.2.0.3.0 - Production
  NLSRTL Version 10.2.0.3.0 - Production
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  SQL > show parameter recov.
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  db_recovery_file_dest string D:\oracle\product\10.2.0\flash_recovery_area
  whole large db_recovery_file_dest_size 20G
  recovery_parallelism integer 0
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  SQL > archive logs list;
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive USE_DB_RECOVERY_FILE_DEST
  More old sequence of journal online 57
  Log sequence archive 59
  Current log sequence 59
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  D:\oracle\product\10.2.0\flash_recovery_area\IAS\ARCHIVELOG\2009_05_26 > dir
  ...
  26.05.2009 18:12 < DIR >.
  26.05.2009 18:12 < DIR >...
  26.05.2009 16:19 2 898 944 O1_MF_1_57_51QV2KC7_. ARC
  26.05.2009 17:15 48 465 408 O1_MF_1_58_51QYD4PG_. ARC
  26.05.2009 18:12 47 736 O1_MF_1_59_51R1QR5C_ 832. ARC
  3 file (s) on 99 101 184 bytes
  2 dir 473 158 713 344 bytes free
  
  D:\oracle\product\10.2.0\flash_recovery_area\IAS\ARCHIVELOG\2009_05_26 >
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  How can I solve this problem? Any suggestions would be very apprecialble.
  
  Thanks in advance!

  Please mark the rewards points for responses that answered your question.

• Trigger the error ORA-06512: in SYS. Line SECURE_DML 5

  Hi all
  I am trying to create a procedure that is called by a trigger like this:
  
  CREATE or REPLACE PROCEDURE SECURE_DML is
  BEGIN
  If (TO_CHAR(SYSDATE, 'DY') IN ('SAB', 'DOM')) OR (TO_CHAR (SYSDATE, 'HH24')
  NOT FROM 08:00 ' 17:00 ') THEN
  RAISE_APPLICATION_ERROR (-20500, ' Insercoes funcionarios only no comercial Monday ');
  end if;
  end;
  /
  
  CREATE OR REPLACE TRIGGER secure_dml2
  INSERT BEFORE ON SCOTT. EMP2
  BEGIN
  exec SECURE_DML procedure;
  end;
  /
  ALTER SESSION set nls_date_format = 'HH24 DY';
  insert into SCOTT.emp2 (sal, empno, ename, deptno) values (7935, 'SANDRA', 1203, 10);
  
  The error that is:
  ORA-06512: In SYS. Line SECURE_DML 5
  ORA-06512: In SYS. SECURE_DML2 line 2
  
  What should I do to remove these erros?
  Thank you

  SQL * Plus still displays the full error stack. You raise an error in the stored procedure that is propagated to trigger that is propagated to SQL * more.

  SY.

• Using the Spry DataSet and Table I get: error: ExprContext is not defined

  Has anyone seen this error? Error: ExprContext is not defined
  Source file: http://www.firstaffirmative.com/SpryAssets/SpryData.js
  Line: 748. That's what I get when I try to use a Spry data set in a spry table.
  Any help is appreciated.
  Thank you!

  Discovered that xpath.js has not been downloaded correctly. Now that it is, it works!