When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle

Similar Questions

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• When I try and print from the internet, I get a message to add a printer but I can print emails fine.

  original title: printer problems

  When I try to print the Web form, I receive a message to add printer, when a printer is already connected and working.  I can't print at all from the internet but you can print emails

  Hello

  1 have you made changes to your computer recently?

  I suggest you to follow the steps below link Microsoft and see if it works:

  You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/973479

  Concerning

• restarting my computer on windows xp load screen when I try to boot from the disc, I get a blue screen can someone help me?

  Recently, I restarted my computer and received the following message is displayed:

  "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.

  If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows
  Normally.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Last good Configuration known (your most recent settings that worked) start Windows normally

  Use top and down arrow keys to move the selection of your choice.
  .
  Seconds until Windows starts: 30 "

  After I tried all the options available, but whenever I do it, windows is only a blue Flash of a screen and then brings back me to the same menu over and over again.

  I can NOT CONNECT AT ALL even in safe mode (by connection, I mean I can't access the section Office at all - case im explained does not this right). as soon as it reaches the load to windows xp my computer screen restarts as if I am the ' turn off and turn back on.

  I tried to perform a repair of Windows through my cd of instalation installation, but it just took me a blue screen saying there was a problem and he had to shut down to avoid damage. He also told me this: * 0x0000000a (0x00000002, 0x00000000, 0 x 00000018, 0x80819b92)

  The computer is an emachine and was purchased at a walmart nearly 5 years ago and it worked fine until one day it started to do this. I can't access any of my files or anything. It must be a software problem, because since then I checked all the problems of material possible and found nothing. the result of this is that I can't use my computer. It is a desktop computer and was reliable until it happened. I'm not sure of the cause, and I think it's something wrong with the operating system. I have tried everything I know and need help as soon as possible.

  Hi josiahgenesis,

  ·         Have you been able to launch the repair facility?

  Try the following.

  Method 1: Try to select disable automatic system failure reboot from the advanced boot menu options to see if it helps.

  Method 2: Check to see if the following is useful.

  You receive an error message "Stop 0x0000000A" in Windows XP

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.

• 6i form is disabled when you try to connect to the DB 11g

  Hi all

  When I try to connect to the local level of database 11g R2 from SQL * PLUS or SQL Developer. But by the form 6i using TNSNAMES connect identifier, shape gives an error and turned off!

  but when connecting to the remote database using the answer TNSNAMES connect identifier that it connects successfully.

  Why? and how to solve?

  Note:

  I formatted the server and reinstall Windows Server 2008 and then reinstall the 6i Forms, but that does not solve the problem!

  Dear Sir

  That we met the same problem to our customer. Follow these steps.

  sqlplus /nolog
  connect / as sysdba
  shutdown immediate
  startup restrict
  alter database character set internal_use UTF8;
  shutdown
  startup
  

  Manu.

• I had to change my password online gmail accnt and now I get a msg "configuration could not be verified" when I try to connect with the new password.

  I had to change my password for the gmail online account. I can access my account with the new password through my browser and my cell phone. But when I try to connect to my gmail account in Thunderbird
  by using the new password, I get a "Configuration could not be verified" error message.
  Any help would be appreciated.
  Thank you
  Brendan

  It looks like you are trying to create a new account. What are you doing exactly?

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect.

  Windows does not remember the setting.

  When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.

  Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.

  Troubleshooting in windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Hope this helpful. Post back if your problem is not resolved in the link above.

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• When I try to connect to the internet via the usb cricket modem thing, I get an error entry ras error creat/change also error 1068

  Original title: new laptop user

  I recently got a laptop EEE. When I try to connect to the internet via the usb cricket modem thing, I get an error ras entry creat/change. I tried to set the automatic start, but when I click the button start I get an error 1068. Any help?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  "Error 1058" error message appears when a service stops unexpectedly

  http://support.Microsoft.com/kb/241584

  Also refer to this article and check if it helps:

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Note: Also valid for Windows Vista

• When I try to connect to the internet it tells me I need network drivers.

  Original title: Windows 7 drivers

  Hi, I recently built a computer with a motherboard Asus H81M-E. I installed Windows 7 pro 64-bit. When I try to connect to the internet it tells me I need network drivers. Where can I find the drivers? There are all the other drivers that I need to install for the computer to function properly? Thank you for reading, I hope you can help.

  I don't know a lot about the generation of computers, but I don't know that you need a network adapter to connect to the internet, which would be listed in the Device Manager.  You really need to go to the asus help and support.  But to give you an idea of what adapter need use Google to search for: asus h81m-e network driver

  Good luck

• WIFI problem, Toshiba Satellite A665 internet connection. Lately when I try to connect to the internet, for the first minute or so it says "no internet connection".

  Hi all

  I had problems with my Toshiba Satellite A665 to internet connection. Lately when I try to connect to the internet, for the first minute or so it says 'No internet connection' (or something similar). Basically, he has the yellow warning triangle. Sometimes I can open the browser and search normally, but other times - and this happens more often it won't let me use my browser. When I have not fix the problem, he said that the DNS server is not responding. The problem is this same error happens all. unique. time. and the other computers in the House connect to the internet just fine. I called TWC and what I get on their part, it is "there no reported outages in your area. Useful, right? Tends to be gnawed by the use of Netflix and Hulu Plus, but this has never kept internet bandwidth to work in the past. What is going on? I'm so tired of having to go all the way down the stairs to reset the router every hour (on a good day) to get the computer to connect to the internet.
  I contacted Toshiba and they say that all the drivers on your computer are up to date and nothing is broken. I have also not downloaded or installed anything on my computer.

  If the reset of the router fixes the problem you should probably watch that as the culprit. Check the software/firmware for the router and see if you can borrow to someone router to test.

  I hope this helps.

• When I try to connect to the games, it just goes back to my home page. I can't play games, the screen just goes back to any page, I was already on

  When I try to connect to the games, it just goes back to my home page.  I can't play all games, the screen just goes back to any page, I was previously on.

  Hello Gary,.

  Thanks for posting your query on the Microsoft Community.

  The information provided by you are not enough to provide us with troubleshooting. It would be much appreciated if you could provide us with the following information.

  1. Are you facing problem with this game alone or with all games?
  2. Are all the device drivers and updates of Windows updated?
  3. You did it all change important before the show?
  4. Have any security software installed on your system?

  According to the title of your question, you can not open the collection of Microsoft solitaire on your computer. The question could be if some security software is limiting to open. It could also be if there is a corruption in the application. If you get a black screen during game play then it could also be due to drivers. So try to follow the steps below and see if it helps you to solve the problem.

  Method 1.

  You can temporarily disable the security software and check if it allows to open the game on your computer.

  Warning: If you need to temporarily disable the antivirus to install other software. You must enable the antivirus as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to virus attacks.

  If the problem persists, go to the next method and see if it helps.

  Method 2:
  Step 1:

  Please go to the link below, download the file and run it.

  Run applications troubleshooting

  Download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Step 2:

  I suggest to go through the link and follow the given procedure. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  After the execution of the method 1 try to open applications to be updated.

  Method 3

  If the problem persists, try to update the drivers supplied by the steps mentioned in the article below. Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install.

  Download and install the drivers

  Get back to us with all the necessary information and the result of the proposed suggestion. We will be happy to help you.

  Kind regards