Collection of statistics with the cascade option is slow

Similar Questions

• help with the new option of memories

  Sorry for my English

  Please help me with the new option of memories

  no memories option appears me

  I have an iphone with IOS 10.02 5

  Hello

  Try this support article > enjoy your memories in pictures - Apple Support

• Table: "move with the text -" option restores the "stay on the page.

  I'm under Pages 5.6.1 on MacBook Pro (15-inch, mid-2015, retina, 10.11.3).) 2.8 i7 1 TB flash, 16 GB 1600 MHz DDR3, GHz Intel Core.

  The question that I will have (and frankly, have frequently), it is that when I have a table or an image embedded in a Pages document, I have problems affecting this table or an image to "move with the text" Format--> arranges--> object--> move with text placement, inevitably the option 'dressing' going on to "in line with text." But I don't want "inline with the text" option is selected, I want the text to wrap around the image. After scouring the other threads, I found the idea that it has to do with the provision of two-sided objects, and that the image or table should be sent to the front to make it possible. However, these options are completely grayed out during this effort together.

  Anything you can do to help would be appreciated, Internet.

  The Baron

  I'm under v5.6.1 Pages on 10.11.3. Table and image in the screenshot below have wrapping of text around the value and purpose of investment for both is stay on the Page. Get a text wrapping. Is this your goal of flow?

  

• On closure of my MacBook Pro always get question "continue application"? with the boxes option to cancel or continue the request.

  On my Mac Book Pro to always stop get question "continue application"? with the boxes option to cancel or continue the request.

  Selection of abandonment does not prevent the following message appears when closing next down.

  Activity monitor shows all the applications that you have

  installed, running in the background? Something can be...

  If you open the force quit, are there topics other than the Finder

  and maybe a browser?

  You repaired the disk from disk utility permissions lately?

  We could also see other boot options on the use in

  Recovery of OS X to use the "OS X Utilities" in there. Be careful.

  Is there more than one user account on your computer? If you

  Start in another user account and have auto login for

  the fact that it is one that rises at the start, a piece

  similar issues or is it just works fine on shut down?

  The question may take some trial and error troubleshooting. This

  may include some basic startup keyboard shortcuts for

  the computer to start in Safe Mode, to do more test, etc.

  If you have access to an official Apple store, you can be

  able to set up an engineering appointment & have someone closer.

  Good luck anyway...

• RunAs with the /savecred option does not accept the credentials stored by the cmdkey command

  Hello

  I am trying to automate the storage of credentials for profiles of several people on several servers so that they can use it with scripts, they will use that have the command 'runas' with the /savecred option.  I use the command "cmdkey" to store the user and the password, but when the runas command is run, it prompts for the password anyway.  I know that the /savecred works since if I leave the command-line runas for the password and I enter, on subsequent runs, he is more requested for the password.  Curiously, if I use the cmdkey command to replace the stored credentials, runas invite you again the password so it can store it himself.  Almost as runas does not 'trust' cmdkey.  Any thoughts on why this can happen and how can I get around it?  I really need to automate the identification information storing or it will take a couple hundred manual executions of the runas command to get this store on the profiles of all the people in need.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

• How to move the "blue bar" with the start option and the clock and icons of a vertical__position on the left side of the screen to the bottom of the screen... has this before happen__once, can't remember what to do.

  How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen.  It's happened before and I forgot how to move.

  Hello pookprec

  Here's how to do it

  .

• Difference b/w PIX & router (router with the firewall option)

  Hi all

  I want to know that how we can differ with router (router with the firewall option) PIX bcz can also make Staefull packet filtering. What PIX device that reviewed by the customer to use PIX of the router.

  Thank you best regards &,.

  Guelma

  Hello

  There is a discussion in this forum on this topic; Check "Firewalling: PIX vs IOS Firewall" last conversation was released January 10, 2006. Let me know if it helps.

  Rgrds,

  Haitham

• I am user of Lightroom 5. Consider purchase version 6. Not happy with the subscription option, bcs, it looks like a year of use I will not be able to continue to use this version and you want me to pay more to continue to use LightRoom 6. Is this good? If

  I am user of Lightroom 5. Consider purchase version 6. Not happy with the subscription option, bcs, it looks like a year of use I will not be able to continue to use this version and you want me to pay more to continue to use LightRoom 6. Is this good? If so - I'll stay with Lightroom 5.

  You have two options to switch to Lightroom 6:

  1. Subscribe (including Photoshop CC 2014), or
  2. Buy the traditional way CS6 upgrade:

  Products

  Click buy

  I want to buy: menu, choose Update (instead of the default is Full)

  I own: Photoshop Lightroom 5.x

  Make your purchase.

• Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES

  Anyone tried the installation with the new Option of software updates?
  
  I'm going to install grid RAC 11 GR 2 and I intend to do the following steps:
  (1) install the Oracle Grid Infrastructure 11.2.0.2 patch group
  (2) make all configurations with YES
  (3) create ASM disks
  (4) install Oracle Database 11.2.0.2 software only
  (5) apply recommended patches 11.2.0.2.2 Oracle (12311357) and 12431716. (Ref. MOS doc [756671.1 ID])
  (6) create the RAC (advanced option) with DBCA database
  
  With these steps:
  Grid and ASM disks would be configured without the recommended patches, but the database will be created with applied patches.
  
  I would not do a "Software only" install IM and then apply the patches because later I would have to manually do all the configuration steps.
  
  If I use the Option of YES software updates to apply patches, YES makes the adjustment, and then I would set up the GRID with YES?
  
  Quote from Oracle® Setup Guide Network Infrastructure 11 g Release 2 (11.2) for Linux - E17212 number of part-11:
  'Use the feature of dynamic download and apply software upgrades of software updates as part of the installation of the Oracle database. You can also download updates separately using the downloadUpdates option and later to apply during installation by providing the location where updates. »
  
  I could not find more detailed information on this feature in the documentation and MOS.
  
  Thank you

  Hello

  You can download the latest updates and patches to help with option - downloadUpdates

  ./runInstaller -downloadUpdates
  

  You can use this note:

  * How to download the latest updates and patches using 11.2.0.2 YES [ID 1295074.1] *.

  Don't miss...
  * Error: INS-20704 while installation 11.2.0.2 with Option 'use downloaded software updates' [1265270.1 ID] *.
  : Note ensure that the user download the updates of patches have own/correct permission to download updates to patch to MOS (My Oracle Support).
  Do not use the directories/tmp/oraInstall * for the download location. New bug 9975999

  Documentation explaining...
  4.5.1 running Oracle Universal Installer
  Download of updates before Installation
  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH

  Kind regards
  Levi Pereira

• about to buy a video.  It contains options for speed on the overview of the site, do get the same options to slow down the video down when I buy the video?

  about to buy a video.  It contains options for speed on the overview of the site, do get the same options to slow down the video down when I buy the video?

  The videos is not 'options '. They are exactly as described. You can use first to add slowed to any video. Correction of the one who is already slowed to normal speed may not produce get results.

  But to answer the question, the videos are exactly as in preview. It would be to you on how you change them and with which application.

• Need help with the command options of codec C40

  Hello! I plan to buy a few codecs C40 and seller offers me to buy three options for this, but I can't find a description of these options. Seller is not so appropriate as I would like and these options cost a lot. They are here:

  LIC-INTP-C40-DD	Option of dual inclusive package C40
  LIC-INTP-C40-SM	IntPkg Codec C40, 4Way individual transcoding Multisite
  LIC-INTP-C40-PR	IntPkg Codec C40Premium resolution (1080 p/720 p 60) Option

  I found the document with similar options here (table 3), but there is also no description:

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11304/ps11312/ps11332/data_sheet_c78-628593_ps11422_Products_Data_Sheet.html

  I think that these options it is me

  one) to use two screens (only two or more?) with C40

  (b) serve as C40 MCU for up to four sites without going through any additional autonomous MCU

  (c) to use video FullHD for videocalls (but I'll buy cameras 1080 p for C40, I need licence also for C40?)

  So, I would ask someone who is familiar with the command of Cisco/Tandberg to describe these options.

  You are actually right on your assumptions and descriptions, you just pretty much what each of these options do listed.

  Dual display-

  C40 has the ability to display the same video on both outputs by default, if you do not get this option.  This option is to display two separate video sources on two screens, such as: Farsite on output 1 and content/selfview on output 2.

  High resolution-

  You might be buying cameras 1080 p but resolution premium will allow you to pass resolutions higher during a call.  You can still view the full HD video when not in a call although if you choose not to get this option.

• ORA-39700: database must be opened with the UPGRADE option

  Hello
  Let me explain the scenario.
  I have the oracle with 11.2.0.2 binary. This House is shared by multiple database (around 15 of database).
  Now, I must apply the PSU 5 for one of the database (allows to take the name of the test).
  So I installed 11.2.0.2 new home in the same server and applied the PSU-5 for thati oracle new home.
  I copied the spfile and password at home girl new oracle, associated to the TEST database. Now when I try to start the DB with option to boot he asks me to open the DB with UPGRADE option.
  
  Why should you start the DB with upgrade option because he was running with the same version in old House as well?
  
  I run catupgrd.sql once more?

  PSU patches usually do not require the database to be opened in UPGRADE mode. The obvious explanation is that the source database is not 11.2.0.2 but something lower.

  HTH
  Srini

• Issue LDAP Primavera 8.1 with the Client optionally

  We managed to setup the web access LDAP client. But we are unable to connect from the client optionally using LDAP accounts.
  
  The erorr that we get is
  Name of invalid user or password. Please try again or click Cancel to exit the application.
  Cannot bind to the object
  LDAP://XXXXX.Corp.aepsc.com:389 / 'OU = lob users, dc = corp, dc = aepsc, dc = com' (80072032)
  
  The authentication of the connection Mode and the database Instance Authentication Mode are on LDAP.
  
  Free 8.1.2.0 (B0602) 10.31.2011.0810
  
  Any thoughts!
  
  Published by: user7475518 on April 23, 2012 10:59

  The Internet connection work with baseDN locked in «...» "(Redhat Linux)
  To the customer in option DO NOT work with framed baseDN "..."

  So, the solution was to remove locking them ' ' field baseDN in P6 Authentication Configuration settings.

  ----
  -Duplicate sorry post with my account

  Edited by: 931339 may 1, 2012 11:05

• Export DataPump with the query option

  Hi all
  
  My environment is IBM AIX, Oracle 10.2.0.4.0 database.
  
  I need a few sets of records using a query in export production. Request is attached to several tables. Since we have the BLOB data type, we export using datapump.
  
  We have weaker environments, but have not the same set of data and tables, and therefore not able to simulate the same query in lower environment. But created a small table and faked the query.
  
  My order is
  
  expdp system / < pwd > @orcl tables = dump.dump1 query = dump.dump1:' ' where num < 3 ' ' directory = DATA_PUMP_DIR dumpfile = exp_dp.dmp logfile = exp_dp.log
  
  Query in the command pulls two records directly. By running the command above, I see the size 80KO dump file,
  In the export log file.
  
  I see Total estimation using BLOCKS method: 64 KB.
  export Dump.Dump1 = 4,921 KB 2 rows.
  
  My doubts are,
  (1) is the correct command that I am running.
  (2) estimate said 64 k, considering that it says also exported 4,921 KB. But the dump file created is 80KO. It is exported correctly?
  (3) given that I run with the use of the system, apart from 2 rows, export all data. We must send the dump file to the other Department. We should not export all of the data other than the query output.
  (4) in the order if I am not using "tables = dump.dump1), the export file big mess." Don't know which is the right.
  
  Your answers will be more useful.

  The short answer is 'YES', he did the right thing.

  The long answer is:

  Query in the command pulls two records directly. By running the command above, I see the size 80KO dump file,
  In the export log file.

  I see Total estimation using BLOCKS method: 64 KB.
  export Dump.Dump1 = 4,921 KB 2 rows.

  My doubts are,
  (1) is the correct command that I am running.

  Yes. As long as you query is correct. DataPump will export on the lines that match this query.

  (2) estimate said 64 k, considering that it says also exported 4,921 KB. But the dump file created is 80KO. It is exported correctly?

  Estimate is made using the full picture. Since you specify, he used the method of estimation of block. Basically, how many blocks have been attributed to this table. In your case, I guess it was 80KB.

  (3) given that I run with the use of the system, apart from 2 rows, export all data. We need to send the dump file to other > Department. We should not export all of the data other than the query output.

  I will export all the data, but going to export metadata. It exports the table definition, all indexes on it, all the statistics on tables or indexes, etc. This is why the dump file could be bigger. There is also a 'main' table that describes the export job who gets exproted. This is used by export and import to find what is in the dumpfile, and where in the dumpfile these things are. It is not user data. This table needs to be exported and will take place in the dumpfile.

  (4) in the order if I am not using "tables = dump.dump1), the export file big mess." Don't know which is the right.

  If you only want this table, then you order export is right. If you want to export more, then you need to change your export command. From what you say, it seems that you order is correct.

  If you do not want any expoirted metadata, you can add:

  content = data_only

  at the command line. This will only export the data and when the dumpfile is imported, it must have the table already created.

  Dean

• I haven't bought a Skype online no wih my live id (microsoft) as login but now microsoft has removed the connection with the account option microsft in henriq version of Skype does - what I do

  my microsoft with skpye account login id is * address email is removed from the privacy *. but do not know what inovativeness has crossed the mind of MS developers they have out to connect you with the account of microsft (also (not imp for me however: facebook)) now I have a online number, which I use to talk to my clients based in the United States. Now, I'm not able to connect to Skype it IE. I am unable to talk to my clients. After Googling and binging the world, I discovered het it is is no not for Skype customer support... I need a solution. or is it stupid to go to microsoft services. I need an answer.

  I lost the confidence of my clients... ask more I need the service return to work. does any body listen... here... wake up please! you're old Skype was better for me

  What do you mean by ' microsoft has removed to connect you with the account of microsft.

  are you able to connect to the MS account?

  Try to use a different ID and check

  Skype using these links, you can contact

  https://support.Skype.com/en/

  https://support.Skype.com/en/FAQ/FA1170/how-can-i-contact-Skype-customer-service