Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES

Similar Questions

• Install ONLY Vision Demo Database and NOT the new installation?

  During the process of installing Oracle Applications R12 on Oracle Enterprise Linux.
  for the database layer, the installer provides an OPTION that allows you to
  ONLY install the (demonstration of Vision database) and NOT the (new installation)?
  
  If so, can you point me to some documentation on how this is achieved and that a
  estimate on how much disk space it would require?
  
  Thank you!

  Hello

  According to the manual 'quick install', page 2-9, it says:
  DIRECT QUOTE - "you can install a new database or a database of demonstration of Vision."
  From this quote, I guess that we can install the demo database, without having to install a database of fresh PROD.
  Don't you think that my assumption is correct?

  Your assumption is correct, but you should consider that quick install will also install the application part also in addition to the database.

  You can either install a fresh database (including the part of the application), but this database is clean (no data), and usually it is used for production after you make the necessary functional configuration OR a vision of the demo database (including the part of the application), and this instance is ready for use as functional configuration is already out in the database (used for demonstration purposes).

  If you are doing a new installation--> you'll need about 90 GB (55 for the database that is clean and 35 GB of application).
  If you do a vision--> you install will need approximately 260 GB (225 for the database which includes configuration data and 35 GB of application).

  Kind regards
  Hussein

• What computer privileges must install and apply the updates for Creative Apps clouds using Windows 7?

  What computer privileges are required to install and apply the updates for Creative Apps clouds using Windows 7?

  When you work for a company that controls the software installed on your computer, it is important to know if IT supports is necessary to install and apply the updates when updates are available.

  It is important to know this information before you buy.

  Thank you for your support.

  ~ Paul Miller

  admin command is required for installation or any changes made to the software from your computer.

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• I installed an external USB connected hard drive Seagate, it slowed the computer and check the new disc repeatedly

  Hello

  I installed an external USB connected hard drive Seagate to copy some movies and pictures of my HP laptop with Vista, but it became a big problem. It slowed the computer and check the new disc repeatedly. Then it wouldn't start without the external drive at all but it was working fine once he was conducting with the external hard drive. So thinking I can outsmart the computer, I uninstalled the drive from Control Panel. Now it primer not at all. The computer lights up briefly and then goes out of itself almost immediately, is there a solution to this? Thank you

  SOM

  Original title: startup problem

  Hi SomBhattacharya,

  Please try the possible fix following first thanks to Carey Frisch:

  1. open the BIOS of the motherboard.
  2. find where it says Priority Boot Device, then select CD/DVD-ROM 1, 2nd Hard Drive and disable all the rest.
  3 find somewhere in the BIOS where it says BOOT USB, Wake on USB, etc. and disable all unnecessary options.

  And second if it does not help, you can try the following with Blue Michael:

  Local Geek Squad had me intentionally set the BIOS to the correct order, then re-order and SAVE.
  It worked, even if the list of the BIOS was always in the right order.

  I hope this helps!

• Can I do a fresh install of Windows 7 Home and use the old product key?

  Hello

  I got a laptop from a former employer who removed the hard drive before give me the computer.

  I installed a new hard drive and you want to do a fresh install.

  The previous operating system was Windows 7 Pro OA Enterprise Edition and I have the product key for it.

  Can I do a fresh install of Windows 7 Home and use the old product key?

  and after that I still increases to 10 Windows using the same product key?

  Concerning

  Regrow72

  If you have plans to upgrade to Windows 10 Home, I would skip trying to reinstall Windows 7 and go directly to Windows 10.

  You can use your family Windows 7 product key to install Windows 10, learn how:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

  If you are experiencing problems activating Windows 10, see:

  Activate your Windows 10 license with Microsoft Chat support

  I recommend to go to Windows 10 now while you can, because Microsoft will stop the free upgrade offer at the end of July:

  Windows 10 free upgrade offer ends July 29 as planned

  Microsoft to remove Windows Notification Nag upgrade 10

  Resources:

  Windows Free Upgrade on schedule 10 to end July 29, 2016 - what are your options?

  If you still want to reinstall Windows 7 Home Premium, please see:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• is it possible to install a 64-bit version and use the 32-bit license key?

  Hi, I'm Gian Carlo. I bought and activated a windows 7 pro 32 bit version, in fact, I need Windows 7 pro 64-bit version. so is it possible to install a 64-bit version and use the 32-bit license key? is it valid? I tried but its key invalid showing... I heard 32 bit or 64 bit again we can select one with the same key... is this true? How to do? Please help me up... Thank you...

  Hi, I'm Gian Carlo. I bought and activated a windows 7 pro 32 bit version, in fact, I need Windows 7 pro 64-bit version. so is it possible to install a 64-bit version and use the 32-bit license key? is it valid? I tried but its key invalid showing... I heard 32 bit or 64 bit again we can select one with the same key... is this true? How to do? Please help me up... Thank you...

  As long as they are the same edition, Yes, you can use the same product key to install the 64 bit version of Windows 7 Professional.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Xps420 - how to install a 2nd HD and make the new drive the boot drive?

  I bought a new and more large hard drive for my system XPS420 almost nine.  I want to install the new disk, create two partitions as the original (C & D (reprise)) drive, copy all of the original drive to the new drive and make the new drive the boot drive, with the original drive becomes a secondary additional storage drive.  I understand how to use the Vista disk management feature to create the partitions and format the new drive. After that, what is the best way to proceed?

  
  

• Select and apply the mask

  Hello!

  I upgraded to the PS 2015.5 version and not the herramineta appears "perfect edge " appears instead " select and apply mask " . In this new space I can not use any of the tools panel on the left (fast selection tool , brush, etc. ) . 
  
  What may be because the problem ?? 
  
  Thanks in advance

  Hi axe_juan,

  Selection and masking of space replaced him refine edge - more information about it here: selection and masking part of a photo. Tutorials Photoshop Adobe CC

  You are looking for, or can you elaborate a bit more on what your question is?

  Concerning

  Pete

• I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

  I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

• Help with a script that detects the content in a cell and apply the cell style to line

  Hello

  
  

  I am trying to add an article to my table formatting script that is a cell with the word 'Budget' (but this can be written as ' Budget:' or ' Budget: (E) "- but without the speech marks) and apply the cell Style - SponsorCells - to all the cells of the whole line. I currently have on what it will, but it does not work:

  
  

  function checkWhichTable()
  {
  // ensure the user made a selection
  if (app.selection.length != 1)
  return null;
  var currentTable = app.selection[0];
  if (currentTable.hasOwnProperty("baseline"))
  {
  currentTable = app.selection[0].parent;
  }
  while (currentTable instanceof Cell || currentTable instanceof Row || currentTable instanceof Column)
  currentTable = currentTable.parent;
  if (!(currentTable instanceof Table))
  {
  // No table selected
  return null;
  }
  return currentTable;
  }
  app.doScript(checkUserSelection, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, "Process Table");
  
  
  function checkUserSelection ()
  {
  var a_table = checkWhichTable();
  if (a_table == null)
  {
  if (confirm("No table selected. Do you want to process *all* tables?") == false)
  return;
  allTables = app.activeDocument.stories.everyItem().tables.everyItem().getElements();
  for (aTable=0; aTable<allTables.length; aTable++)
  {
  processTable (allTables[aTable]);
  }
  } else
  {
  processTable (a_table);
  }
  }
  function processTable(table)
  {
  // do something here!
  
  
  //Set 1st Row Height
  table.rows[0].height = "30mm";
  
  
  //Find Text in Cell and apply Cell Style to Row 
  var  
    myCellText=['Budget', 'Budget:', 'Budget: (E)'];  
   var myRegEx = new RegExp("^("+myCellText.join("|")+")$");
    for (i=0; i<table.cells.length; i++)
    {
      if (table.cells[i].texts[0].contents.match(myRegEx))
        table.cell[i].appliedCellStyle = "SponsorCells";
    }
  
  
  //end - do something here!
  }  
  

  
  

  I can get the script to apply the cell style to "SponsorCells" for each cell that contain the word 'Budget' etc, but I need cell ever on this line to have the cell style applied. I tried to re-write line 56 which applies the style to a cell, but I can't seem to make it work. Any help would be great.

  
  

  Separate on this issue, I would like to have a line of code similar to the 46 line, which sets the 1st height of lines, but I would like to say "If a cell has 'A cell Style' and then applies the value height 10 mm". If someone could result as a help of bonuses, things would be great double.

  
  

  Thanks in advance!
  

  But that could be painfully slow. To speed things up, follow these steps:

  var cells = table.cells.everyItem().getElements();
  for (var i=0; i
  It is faster, because it creates an array of cells with a call to table.cells, which is several times faster than calling table.cells. And before assigning to line 12mm height is useful to check if it is already 12 mm. checking things in InDesign and do things only when it is necessary is much more effective than simply doing things even if they are not necessary.
  		   

• Search for characters, nested and apply the Cstyle

  I have

  you want to find the nested applied characters and apply the Cstyle, but my capture of code all the text in a document. Can you please guide me,

  nestedreport();

  function nestedreport() {}

  myDoc var = app.activeDocument;

  var myDocPath = myDoc.filePath;

  var myDocName = myDoc.name;

  try {}

  app.findGrepPreferences = app.changeTextPreferences = null;

  app.findGrepPreferences.findWhat = "^.» + » ;

  myFind = myDoc.findGrep (false);

  var ntexts = new Array;

  for (i = myFind.length - 1; i > = 0; i--)

  {

  if(myFind[i].contents.nestedStyles==null)

  {

  ntexts.push (myFind [i]. Happy)

  ntexts.appliedCharacterStyle = "Nested";

  }

  }

  }

  {catch (e)}

  }

  

  Hello

  I'm still somewhat struggled with the final goal, however to make a small step:

  To detect a string that is formatted using nestedStyle (part of the content of the paragraph), you can use this:

  assuming that ==> text is selected - say a paragraph

  var
    cCharStyle,
    charStyles = app.selection[0].characters.everyItem().appliedNestedStyles,
    step = charStyles.length,
    resString = "";
  
    while ( (cCharStyle = charStyles.pop() ) && step--)
         if ( cCharStyle.length )
              resString = app.selection[0].characters[step].contents + resString;
  
  alert ( resString );
  

  Jarek

• I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  Hi Dan, try to run the cleanup (helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) tool to completely uninstall CC to your computer, and then reinstall the desktop app: creative.adobe.com/products/creative-cloud

• link to an interactive report AND apply the filter for 2 items.

  Hi can you help me out here on how to create a link to an interactive report AND apply the filter for 2 items.

  Here is my code

  I have a list of table, clicking the selected item should link to interactive report and create the filter. Below the code does not work for a filter. can you help me what to do with 2 filters.

  A filter = > works very well

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Scenario 2:

  Two filters = > does not

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test:P00_YYY:001:IRC_YYY:test2 :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Thanks in advance

  actually the syntax wrong values in the syntax of the passes to several elements.

  is

  f? p = 6000:6004: & APP_SESSION. : NO:6003:MY_ITEM1, MY_ITEM2, MY_ITEM3:1234, 5678

  Use above scenario and verification.

  Go

• Selection of parts and columns, or entire lines and apply the character style

  I am trying to apply character styles to certain parts/whole rows and columns.

  I can change individual cells with the following code...

  table = app.selection[0];
  if (table.hasOwnProperty("baseline")) table = table.parent;
  if (table instanceof Cell) table = table.parent;
  if (table instanceof Column) table = table.parent;
  if (table instanceof Row) table = table.parent;
  if (table instanceof Table)
  
  {
   table.rows[0].cells[6].texts[0].appliedCharacterStyle = "none report";
   }
  

  ... but when I try to select an entire line, I get the error 'Object does not support property or method' texts. "" "When I try one of the following two codes.

  {
   table.rows[0].cells.texts.appliedCharacterStyle = "none report";
   }
  

  {
   table.rows[0].cells.appliedCharacterStyle = "none report";
   }
  

  Anyone know how I can do the following?

  1. Select any row (or column) and apply the character style

  2. Select the last line (regardless of the number of rows in the table) and apply the character style

  3. apply the character style to specific columns (with theexception of the cells of two albums)

  Thank you!

  Hello

  Change this line:

  table.columns[a].cells.itemByRange(2,-1).texts.everyItem().appliedCharacterStyle = "chart orange";
  

  for the first 2 rows in each column

  Jarek