color box below page Indesign?

Similar Questions

• How to change the color of the page from white to gray in Indesign?

  While working on a document, the white pages (not cardboard) appears too bright for my eyes. Is it possible to change the color of the pages from white to medium gray at the level of the display that only is that gray should not appear when printing the pages in a document?

  Thank you

  Altogether. Change the shade [paper]

• How to change the color of each page number in InDesign CC?

  I'm working on a book that has pages with black background and some with white background... I need to know how to change the color of each page number, so that they will be visible on the black background.

  I tried clicking on the page number, cmd + shift click... nothing seems to work. I have all the page numbers on a separate layer, because they were hidden behind the images that I place on each page... I don't know if it's important.

  Any suggestion would be appreciated.

  My best advice is to make a second set of master pages with white numbers and apply them as needed.

• "The feature you are trying to use is on a network containing the installation package"status.msi"in the box below.

  Original title: the status message appears on the start page.

  Message that appears at startup to the top: the component you are trying to use is on a network containing the installation package "status.msi" in the box below.  Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below.

  Hello

  Have a few questions that might help me to analyze the cause of the issue you're having with your computer.

  ·         When you get the message that says, "Status.msi file missing?

  ·         You have an installed HP printer?

  ·         You made any hardware or software changes the computer recently?

  Method 1:

  You can try to clean boot and check if you still get the error message.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the article.

  Method 2:

  If the problem persists, you can try to restore the system on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Hope this helps

• Query cannot be parsed in the generator. If you believe that your query is syntactically correct, check the generic "columns" box below the source of the region without analysis. ORA-00905: lack of keyword

  Hi all

  I have create report sql in version 4.2, and now we have apex version 5.0 upgrade.

  I encountered error when I change the State of sql

  The error massage:

  Query cannot be parsed in the generator. If you believe that your query is syntactically correct, check the generic "columns" box below the source of the region without analysis. ORA-00905: lack of keyword

  My SQL

  SELECT VW.*

  , CASE WHEN (VW.file_code is null

  OR VW.cancel_flg = 'Y'

  OR (TOUR_DEP_DATE + GET_FILE_LOCKING_DAYS (VW. (SBU_CODE) < = trunc (sysdate))

  ) THEN

  ' < font color = "Red" > < b > other < /b > < / police > '

  ON THE OTHER

  "< a href =" f? p = & APP_ID.:51: & SESSION. : O PR: & DEBUG. : 51:P51_FILE_CODE, P51_COSTING_CODE, P51_TOUR_REG_NO, P51_VERSION_NO, P51_REQUEST, P51_AGENT_NAME, P51_ADULTS, P51_CHILDS, P51_MKT_CODE, P51_QUOT_CURR:'

  || FILE_CODE | «, » || COSTING_CODE | «, » || TOUR_REG_NO | «, » || VERSION_NO | «, » ||' OPR' | «, » || AGENT_CODE | «, » || VW. FROM_PAX | «, » || 0||','|| VW.mkt_code | ',' | VW. QUOT_CURR |': ' > < font color = blue > < b > other < /b > < / police > '. "

  END as "other Actions".

  , CASE WHEN ((VW.file_code is not null AND TOUR_DEP_DATE + GET_FILE_LOCKING_DAYS (VW. (SBU_CODE) < = TRUNC (SYSDATE))

  OR cancel_flg = 'Y '.

  OR (VW. REF_COSTING_CODE = VW. ADDL_FIELD2 AND VW. ADDL_FIELD1 LIKE '% COPIED FROM % OF APPROVAL'

  AND BOOKING_NAME LIKE "%-Backup")

  ) THEN

  ' < font color = "Red" > < b > edit < /b > < / police > '

  ON THE OTHER

  "< a href =" f? p = & APP_ID.:149: & SESSION. : & DEBUG. : 149:P149_COSTING_CODE:'

  || COSTING_CODE |': ' > < font color = blue > < b > edit < /b > < / police > '. "

  END AS 'Edit '.

  , CASE WHEN (Nvl (cancel_flg, 'n') = 'Y')

  )

  THEN

  ' < font color = "Red" > < b > add < /b > < / police > '

  ON THE OTHER

  "< a href =" f? p = & APP_ID.:33: & SESSION. : & DEBUG. : 33:P33_COSTING_CODE, P33_FILE_CODE, P33_MKT_CODE, P33_QUOT_CURR, P33_NO_OF_ADULT, P33_NO_OF_CHILD:'

  || COSTING_CODE | «, » || file_code | «, » || VW.mkt_code | ',' | VW. QUOT_CURR | «, » || VW. FROM_PAX | «, » || 0 | ': "> < font color = blue > < b > add < /b > < / police > '

  END as 'Services '.

  OF TOUR_MAS_VW VW

  How to solve it.

  Thank you

  Dear friends

  Thanks for your helping hands.

  I found the solution for this. We can solve this problem by using these solutions

  • A region of HTML:

    click me
    

  • Using PL/SQL:

    htf.anchor('f?p=100:5:'||V('APP_SESSION'),'click me');
    

  • Using a SQL query: SELECT htf.anchor('f?p=100:5:'||:APP_SESSION,'clickme') FROM DUAL;

  We can write the query in the form

  SELECT ' f? p = 100: 1 :'|| : APP_SESSION |': ' | : APP_UNIQUE_PAGE_ID |

  ': P1_EMPNO :'|| employe_id,

  first name,

  job_id

  Employees

  Thank you & best regards

  CORINE

• How to apply the Swatch of paper color on the page

  Hi Experts

  I want to apply the paper Swatch on the page color.

  I have try this to set the paper Swatch color but no success.

  indesign #target

  myDocument var = app.documents.add ();

  myPages var = myDocument.pages;

  myPage = myPages.item var (0);

  var swatchclr = app.activeDocument.swatches.itemByName ("Paper") .properties = {space:ColorSpace.RGB, model: ColorModel.PROCESS};

  swatchclr.colorValue = [255,150,0];

  There is no change in the value of the paper Swatch color.

  How to apply that color on the page?

  Thank you.

  Hello

  Watch this line ('=' repeated):

  app.activeDocument.swatches.itemByName("Paper").properties swatchclr = = {space:ColorSpace.RGB, model: ColorModel.PROCESS};

  swatchclr.colorValue = [255,150,0];

  Swatchclr is a swatch.properties not a swatch.

  Make:

  swatchclr = app.activeDocument.swatches.itemByName ("Paper");

  swatchclr. Properties = {space:ColorSpace.RGB, model: ColorModel.PROCESS, colorValue: [255,150,0]};

  Rgds

• Color in the Pages themes

  Hello! How can I create a color theme in Pages? (for example for the themes of personal color for sharts or table fills? "We have the brand colors and should be used in all documents.) I have fpund the addition of a single color, but not a complete theme with different shades.

  Sorry if someone has already asked and answered, I looked all day and have not found anything useful

  Thank you!

  Graphics and tables can have Styles that include all aspects of design, including colors, fonts, lines etc.

  See Styles in the side bar when you click the object.

  Select one, change the parts that you want and then click on the + sign in the Style and create a new Style based on your example.

  Peter

• Color change of page to Pages

  Hi all.

  Whenever I start (newest) page, it starts with a blank page. How can I change the color of this please?

  There is no configuration in Pages ' 09 v4.3 or Pages v5 (any version) to change the color of the page (eye strain relief) in the user interface and does not change the background color that stays with the document. The latter is done with a form of color-filled, enlarged to the size of the body of the document and then to the master of the section of force it to appear on all pages. This would be impractical.

  The free LibreOffice will allow you to customize (preferences: appearance) your word processor interface (Writer), including the background color of the document and the color of the page. Once defined, each document created or opened with have this Visual, but the colors are not incorporated in the document itself. The downside is that there are many presets, but no way to launch a color picker to customize the exact color that you want. What follows is the lightest yellow that is offered, and I still prefer less yellow.

  

• A color box control are editable so that only 4 colors can be selected.

  Hello

  I wanted a color box to be used as a control so that when left clicked, there are 4 colors that they can select which will dictate what will do the program.  Currently, make a left click on the color box brings a variety of colors, and the only ones I can control are the colors of the "user", which I modified it to display only the four colors I want.

  However, the remaining color cursors and colors of history etc. are always displayed.  Is it possible so that only the four 'User' colors can be displayed by clicking the color box?

  Thank you.

  Hi Bobby,.

  I suggest using a ring of photo instead. Here, you can see only 4 colored rectangles systems (differently) to the user...

• Random colors are too dark. Questions on the color boxes

  Hey all,.

  I'm trying to change the color of the plots on a graph of mixed signals remotely using the 'color box' which works very well. However, I'll also put squares of color to a color at random when the program starts first of all which is where my problem lies.

  What I am doing, is that I have a random number generator pumping a number then I multiply the number by 10000000, just to give me some brighter than the dark colors, and then I wired to I'm defining the random color on the color box control. The problem is that even if it does not the decent colors some colors produced are quite dark and difficult to see on the graph of mixed signals.

  I could make the graphic background a different color if I have to in order to see a majority of the colors coming out, but I would rather that have the colors come out on the side that is bright and colorful.

  So I have two questions for you guys and girls:

  1) how the colors of the colorbox get determined using the unsigned int 32?

  Such an example of why I'm confused, is that the number I had is 5726420 from the random number generator (+ multiplies), but under the control of colorbox RGB value is R:87 G:96 B:212. Why is this?

  2) there is any type of algorithm out there that someone did which can produce random values that will give the kind of colors neony? or whatever it is semi bright indeed?

  Any help is very appreciated!

  Ionized

  Use 'RGB color' of three random U8 (o.. 255) values to generate a color. (double click on it to open the VI to understand the structure of the type of color data )

• System color constant color box

  Hello

  I want to know how LabVIEW manages the system color values in the case of a change of system. For example:

  I develop a VI on the 'A system' and choose the colour system of the 'window' to the constant color box. Now I run the VI on another "system B".

  From LabVIEW now the system color "window"System B"or retrieves a fixed value of time on 'System' of LabVIEW Development?

  Kind regards

  Christian

  It uses whatever colors are the system colors for the machine on which it is actually being run.  Use the colors of the system B.

  Same for fonts.  If you use all the symbolic as fonts dialogue, application,... and they are attached to the dialogue system fonts, application, menu (I could have these names wrong or mixed) through LabVIEW or .ini file "app" of the exe, it will use whatever windows are fonts.  This can cause problems for an application where the façade was based on an older OS size where the system fonts are different and smaller by pressing the app gets on a newer OS such as Win7 where the police are something else, but also larger by one or two points.

• setting the color of a color box

  Hey all,.

  I use a color box, and I will fix the color of the box of colors to a specific color, even if I click on it. It is a way of locking in the color of the color box some how?

  Thank you very much!!!

• change of color box with the value of the probe

  How can I use a color box to display a value of sensor... ? I tried, but it's just dark blue blue...

  by example, if I have a distance sensor box color gradually shifts from red to green (perhaps and yellow for the middle) for a value between 0 and 255.

  Thank you

  Try this, use only a simple interpolation.

• framed color box color changes randomly - with red, blue and yellow

  Hello

  I want the user to do something when the color box changes from black (ready) to green (together), then red, yellow or blue (go). The user wil know what colors come to them.

  The user will will push a specific sequence of buttons depending on the color.

  Success will push the sequence of buttons assigned to a specific color. There are 16 push buttons. (this is to recall and response time)

  In any case, I can write the program without problem.

  The user can test red (push a specific sequence of buttons according to red), then blue and yellow. I can get to repeat a color so they will make four tests.

  Sorry for being long-winded.

  My question is how I randomly generates a color to begin a trial.

  If this set of tests is unclear by the subject on go the color was presented randomly as a guest.

  Any help would be greatly appreciated!

  Thanking you in advance,

  NK

  If you have a fixed set of colors, put them in a table and generate a random number between 0 (Array Size-1) and an element of the matrix of the index. Multiply the random number (0-1), multiply by the rounded and maximum value at most closely to get your index.

  If you want to generate a truly random color, use the RGB color VI and wire 3 random numbers between 0 and 255 to generate a random red, green and blue component like this:

  

• MONITOR HP PROBLEM, I have HP TouchSmart 600 PC & after closure, monitor has rows colored @ bottom of page

  I have HP TouchSmart 600 PC & after closure, monitor has rows colored @ bottom of page, I can't find a solution.

  These lines appear after that the power is stopped?  If so, then this could be a physical problem where the LCD is damaged.  Really, there is no solution in Windows.