Color Laser MFP4: Remove dead printer

Similar Questions

• Color Laser CM1015 does not print color

  Hello, I hope you can help.

  I can't print in color with my MacBook Pro on a Color LaserJet CM1015.  The rest of the Office is based on PC and there is no problem, but my documents are produced only in black and white.

  We had a Setup for Windows disk, so I downloaded the software for Mac on the HP site, but it will still come out with no color.

  Any ideas?

  Thank you very much

  Nancy

  If you can mark it as resolved, we would be grateful.

  Thank you.

• Color Laser Jet M277dw MFP: Print quality

  Just got this new printer today.  Already, I'm sorry that I bought.  Too complicated to implement.  It replaced an Epson Office Jet which was VERY user friendly.  Support staff is fairly dismissive.

  I tried to print a greeting card with a colored background and white printing.  It print out okay, but the impression was black and unreadable.

  Any ideas?

  Just consider return it for a refund and buy something else.

• Dell 2135cn Color Laser all-in-one printer

  My printer now prints color but extremely light bone black!

  On Wednesday, October 10, 2012 13:46:23 + 0000, Magic Margie wrote:

  My printer now prints color but extremely light bone black!

  It probably needs a new black toner cartridge.

  Ken Blake, Microsoft MVP

• HP COLOR LASER JET CM1312 MFP: Print cartridge problems

  I loaded two cartridges with success, but with the third (CB541A - Cyan) I get the 'delete the shipping in the Cyan cartridge latch '. It IS deleted. I put the old cartridge and no problems, I tried again with the new and the same message appears. I tried to turn off the machine with the new cartridge in but nothing works.

  What should do?

  But not sure since the old one works, sounds like a faulty new cartridge. Consider a replacement.

• Color Laser Jet MFP M277 Pro: Can I scan a document on the HP MFP M277 Color LaserJet Pro printer double-sided?

  Hello

  What I can and, if so, how to scan a document double sided on the Color Laser Jet Pro M277 HP printer MFP?

  Thank you very much

  Paul

  Hello

  No, it only supports printing double-sided, recto verso but scan copy not duplex from the Manual:

  http://h10032.www1.HP.com/CTG/manual/c04474163.PDF

  Kind regards.

• HP Color Laser Jet CP1215: print - guard 'book light' flashing - printer stops charging of paper does not alter

  Hello!

  For about a week, I have the following problem with my HP Color Laser Jet CP1215: after 2-3 pages of printing, the device stops abruptly in the middle of a job and the light number 5 (paper) continues at the flashing light.

  However, the bin is full with paper.

  Ignitions and extinctions help only for another 2-3 pages, then printing will stop again as described above.

  Is there maybe a photoelectric cell that needs to be cleaned or a mechanical part that gives the status of bad paper from the paper tray to the printer?

  Thanks in advance for any help,

  Best wishes

  Herwig

  Hi @wigl,

  Welcome to the Forums of HP Support!

  I see that your HP Color LaserJet CP1215 printer stops printing when the print jobs. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating it would be. To determine the cause, we need to use more than one document. Redundant that some steps may seem, I would execute all.

  Please, try the steps in this these guides:

  • HP Laserjet CP1215 and printers CP1217 - 'paper ' Error Message is displayed and the printer does not look upward or feeding paper.
  • The Paper Jam flashing on HP Color LaserJet CP1215, CP1217 printer.

  If the problem persists, try a hard reset:

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Color Laser JEt MFP M477fd Pro: automatic update of ruined printers print

  My new laser Jet worked very well until I followed the instructions on the printer for an automatic update. Now print is ruined. Page layout is described in gray, and look bad color photos. This happened DIRECTLY after that I said yes to the screen to update printer on the printer itself. I did not change my Mac.

  I tried closing printer, computer shutdown, and then restart the printer, then restart the computer.

  The Configuration report (can barely read.) Firmware Datacode says: 20160331, which is apparently the most recent printing for my model software.

  I'm on a Mac 10.10

  Color Laser Jet Pro MFP M477fdw, bought end of 2015.

  The printer was so easy to set up and worked wonders for 200 pages that I sent to him so far, until I said yes to an update. Wish really to say yes to that, but I just assumed it would work as well as everything else.

  Thank you for your help to solve this.

  After trying countless things, including uninstalling and reinstalling the printer and download the latest driver, I called Technical Support. The number is on the internet, not on HP. 800-334-5144 where you need it. They continue to try to trick you online, but eventually, you get to someone who can help.

  When I described the print results, I was getting, she had me do the cleaning Page, 3 x and 3 x color calibration, which corrects the problem.

  The problem of updating firmware with the trainer, is what I * think * she said.

  If your printer works fine... DON'T let NOT download an update.

  It has been long since I've owned a laser printer. Lesson learned. Thank you, Natasha.

• Store a color laser printer

  Hello

  I have a LaserJet CP1525n color laser printer

  Now, the black toner is completely exhausted... the color toner not yet!

  I already have a toner cartridge real black replacement in hand...
  The QUESTION is... If I plan not to use my printer for a long period... a year can be... Is it better to replace the black empty printer cartridge now? or is it better to keep the old and replace it when I start again using my printer?

  Thank you very much

  Hello, I'll be happy to help you with your questions about replacing the toner cartridge.

  It would be preferable to replace the cartridge as SOON AS POSSIBLE. This will prevent further damage of the printer. Sometimes, when the cartridges of remain empty and not replace, it can damage the print head and then you will perform in a whole other issue.

  '"CLICK the WHITE STAR to say thank YOU" '

  I hope this helps.

• Ability of blue tooth on HP jest CP1518ni color laser printer

  I have a HP Color Laser Jet CP1518ni printer and I use it with a usb cable to print from my laptop MacPro. I have an active Blue Tooth on my laptop and I want to know if I can connect my HP printer to my MacPro (O SX 10.9.2) via Blue Tooth and if yes, how can I do for that? This is a non-technical person.

  Hello

  Unfortunately, your printer model does not support wireless or Bluetooth connection, it can only connect to your PC via the USB port.

  Good luck!

• How to get a hp 4600 Color Laser jet print on a vista or Windows 7 64 - bit OS PC which does not have a parallel port connection?

  My hp 4600 color Laser Jet uses a parallel cable to connect to a Windows PC. When I had XP as the OS it worked fine. But now after the upgrade to Vista or Windows 7 64-bit OS it will not work and my PC does not even recognize it when it is plugged into the PC with the parallel to USB cable that worked so well before. So, what should I do to get the PC to recognize the Hp 4600 and have it printed again as before? (My first plan is to try to get the printer to work by hooking up through Wireless. Does anyone know if it will work? I'll answer my own question, if it does. Wish me luck! (Thank you!)

  According to the HP support site, there are drivers available for Vista and Windows 7 If you're lucky it. Download the appropriate drivers for your computers. According to the information of product from HP, this printer can be connected directly to the network by an ethernet cable. I don't see where it has wireless capability, but in any case ethernet is preferable for printer connections if possible.

  Connect the printer directly to your router or switch connected to your router and assign a static IP address outside the range the router DHCP. Then, install the drivers that you got from the HP website for your operating system.

  MS - MVP - Elephant Boy computers - don't panic!

• Print Page of cleaning HP Color Laser Jet CP1215 problem

  I have a HP Color Laser Jet CP1215 connected to a Windows7 64 bit operating system. The printer prints the shadows cast on the left and right of the paper edges, but also the light shadows in the printing.  I saw the HP Toolbox for my printer and tried to print a cleaning page.  All I get is a text box indicating that the printer could not be accessed, even if it will calibrate and print a test page. I need different drivers or is there another solution?

  Hi eitooc,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you found shadows on the page when printing.

  I'll be happy to help you.

  The driver may be corrupted not allowing all the features work.

  There could be a problem with the toner or the fuser unit causing this problem.

  Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. Try running Cleanup again.

  Here is a document to solve problems of quality Print. Follow the steps to see if that will help solve the problem.

  If you still have problems you can uninstall and reinstall the latest version of the software.

  HP Color LaserJet CP1215 Printer Drivers. Select the operating system, and then click Next.
  Click on driver - product Installation software and download the drivers.

  Then try to re-run the cleanup page.

  This happens with all applications?

  What kind of paper do you use?

  You use genuine HP toner?

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great weekend!

• HP Color Laser Jet 1600 in grayscale only print

  Using Windows 7, photographs BOF emails only print in grayscale. The image is in color but in grayscale when played back before printing. What adjustments should be made?

  Hi Mike,

  Thanks for posting your query in Microsoft Community.

  From your description, it seems that photographs in color of emails only print grayscale to HP Color Laser Jet 1600 printer.

  I'll be happy to help you. This problem could be caused because printer settings can change to grayscale and need to change print or as default settings.

  I would be grateful if you could answer the following question:

  1 have you changed any settings in your printer software?

  2. which webmail client or by e-mail you are talking about?

  3. What is the file format of the image?

  4. What if the problem persists for photos in the computer?

  I suggest to follow the steps below and we update on the State of the question.

   

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Choose the printing options:

  http://Windows.Microsoft.com/en-AU/Windows7/choosing-print-options

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Printer HP CP1525nw Color Laser Jet not print wireless with Win 7.

  My HP CP1525nw Color Laser Jet printer will not print wireless with Win 7. It is not recognized as a wireless device when by Win7 'add a device '. It has worked very well in the past, but now I have to connect the printer with a cable to be able to print.

  Thank you in advance for your help!

  Sakii305

  Hi Sakii305,

  Thanks for posting your query in Microsoft Communities. The problem description, I understand that you are not able to print wireless. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow the steps in the article.

  Solve printer problems

  You can read this article for more information:

  Why can I not print?

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Cannot install HP color laser jet 2600n printer in windows 8

  Original titile: Enhed

  can not install printer HP color laser jet 2600n to windows 8

  I'm having the same problem.   Uninstalled the printer completely, restart the portable computer and the printer, and then I'll reinstall it with the disc.  Let's see what happens.  I really need to get this printer to work...

  N