color of the very light slider

Similar Questions

• Please bring back the fill light slider!

  I was very disappointed when I pulled the high LR4 last night.  This new slider shadows turned horribly pale compared to the fill light.  Frankly, it's a chicken!  For me, the fill light was magical.  I can't tell you how many people ask "How do you have that" when they looked at my photos hanging on the wall.  It is a perfect tool and one that made LR stand out.  Not only it meet its destination to add just this amount of shift of the filling, it's also an extremely effective way to produce a Pseudo edgy, HDR, effect. I hope that curves near the same results, but there is no way it will be as simple and reproducible. I got kick for not trying the bata version before paying the $69 upgade (Fortunately it wasn't $150). If I can't understand this point, I'm heading to LR3. Others don't miss Fill Light as I do?

  Just like to do my origianl announcement: I sat with LR4 and specifically challenged PV2012 to allow me to recreate the effect in the Chicogo pic I posted above.  I am happy to say that I'm pretty close to my satifiaction. I did it by maxing out shadows, cranking up the exhibition, slightly increase Black, clarity and finally uping numbering vibrance. Incidentally, I noticed that with PV2012, increase clarity flies at a much higher color saturation, therefore him using saturation and vibrance.

  Note: I have to say, it was very easy to switch between PV2010 and PV2012. and I was happy to see that when you click on a given image, LR4 automatically changes the mode to match this use to create the image.  In other words, if today you need to change an image using PV2010 and the other with PV2012, LR4 remembers mode that was used and automatically switch to it when one of the images is selected. It is very slippery!

  Problem solved!  Thank you for all your comments!

• BlackBerry Smartphones change color of the warning light?

  Is it possible to change the color of the warning LED light (red by default) when a new message is received, or is some kind of customization of color possible? For example, can I do Flash one color for emails and another colour for SMS? I know that the different colors are possible, because it remains green when fully charged and plugged in, and currently, it flashes red when any type of message was received. I also heard third-party applications that can change the color, but there is a sort of customization possible without a third-party application?

  Hello

  Not that I know of.

  Thank you

  Bifocals

• HP8600: Tubes scanner HP8600 show of color and the vertical light areas of the photo scans

  Something new: on my scans color photos to the computer, there are vertical clear areas on the scan. These are the sweep tubes that have somehow become overilluminated and bleed through the digitization?

  Thank you for your answer... much appreciated. I downloaded the ScanDoctor and it seems to have solved my problem!

• How to change the color of the radio buttons on question slides

  Hello

  Can I change the color of the radio buttons (right now it is blue) on question slides?

  Thank you very much!

  Not out of the box and only for HTML output. Search for assets HTML option button is there. If replace you it with a custom chart... Here's the path on my system (I'm on Win 7)

  C:\Program Files\Adobe\Adobe Captivate 9 x64\HTML\assets\htmlimages

• Is the COLOR of the 6s iPhone however is lighter than the iPhone 6 Gold?

  Hello, is the COLOR of the 6s iPhone but is slightly lighter than the iPhone 6 Gold?

  Is the COLOR of the iPhone 6 deeper than 6 s iPhone gold gold?

• color of the digital meter ramp or slide is missing the performance

  Hello

  I, m using CVI 2010 (10.0.1. (419) on windows 7-64 bit.

  In a simple program, I use a digital meter. I also use the color of the digital counter and on the IUR ramp, I see the ramp as expected with the defined colors. But when I run the Panel (in the debugging or mode of publication), the instrument (meter) shows but without the color ramp.  If I save the uir file, close it, then reopen it, the ramp of color in the file of the IUR is also missing, so I have to configure it again. It's the same with a digital slide.

  I think it's a bug? Someone at - it the same problem?

  Greetings from bremerhaven

  Norbert

  My guess is that you have inadvertently saved the. IUR in an old format (8.1 or older). In the user interface editor, check the bottom right of the window to see what the current format of the. IUR is.

  If this happens, you will have to change via file > save as.

  Luis

• The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

  I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

  Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

  Restart all open windows ie11.

  For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

  Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• Get a script error when you try to print, and when I print the black ink is very light on the page. I replaced the ink already, it's a hp officejet 6500wireless.

  Get a script error when you try to print, and when I print the black ink is very light on the page.  I replaced the ink already, it's a hp officejet 6500wireless.

  See if this helps:

  http://support.Microsoft.com/kb/308260

  Tom Ferguson

• Brush CC Illustrator creates a lighter color for the stroke.

  Hi all

  I searched for this topic with the lucky number, sorry if it is redundant and if so, please send a link. I apply a brush for a simple square and line and fill are the same red. I tried to work in the brush options and no luck there. Why the color change to a lighter shade? Any fixed or thought would be great.

  Thank you!

  

  The work of brush pen to coal isn't black, it's just 100 K.

  When you drag the it to the artboard in an RGB document, it translates this color:

  

  That is simply not enough black to get the correct outline color.

  Make it RGB 000 and then replace the shape of the brush and he'll be right.

• Paint on the layer in Photoshop with lighter color makes the color paint more light go under the darker colors? How can I fix it?

  I have Photoshop CC

  When I use paint tool to paint on lighter colors on a layer, it always goes under the colors darker on the same layer. Even if I paint the darker color first and the lighter color, second, the lightest color continues to go under the darker color. And it's all happening on the same layer too! It's like photoshop is to order the colors based on what color goes on top and what colors light up and down in the order how dark the color is.

  How can I do so that the color that I finally painted goes on top?

  See the blending mode in the Toolbar Options paint is set to Normal.  There is a parameter 'Behind' who will actually do what you describe.

  Also check your layers panel blend modes and settings for each layer.  Maybe not relevant in the present case, but recommended when the strange behavior happens in the layers.

  Gene

• When I open a photo in CS6, the background "stutters" back and forth between the mole default background and a very light background of gray and white checked. This has just begun. Any suggestions?    Thank you RB

  When I open a photo in CS6, the background "stutters" back and forth between the mole default background and a very light background of gray and white checked. This has just begun. Any suggestions?    Thank you RB

  Windows? Update your driver from the website of the manufacturer of the GPU video card.

• Change the background color of the slide show full-screen when the option fit content proportionally

  I signed up for a demo of Muse and I must say that I am very impressed. After using Dreamweaver in the past in school, often get bogged down in the code, Muse is a designers dream. I even told a few friends about it, calling for «InDesign for web designers» The features and tutorials on Adobes site, are fab but I need now to a little help.

  I want several images to fit the entire screen on a specific section of my Muse site, just below the navigation bar. I noticed the best way to do this is to create a slideshow full screen. With this option I can add one or more images fade in and out - communicate various messages and points of sale. By default, as the widget options are defined in the charging framework, which extends from my image to completely fill the browser. Unfortunately with this selected the image loses some quality and seems to zoom in, getting cropped in the process. When you change the settings to adjust the content proportionally everything looks great. The chart is smack bang under my sailing as I desire however there is also a horrible gray area each side because the graph is now its original size. Grey on each side seems to be the background color of the slideshow, but I can't find a way to change this - from grey to black. Please check the link for more information: https://dl.dropboxusercontent.com/u/50403221/Screen%20Shot%202014-08-14%20at%2018.00.34.pn g

  If any colleague Musers know of a way around this? Or maybe it's an enhancement request?

  Thanks, Chris

  Hi Chris,

  You can select the slideshow widget that you added and check the fill color in the control panel.

  Please refer to the following screenshot:

  

  Kind regards

  Akshay

• How can I set different background color for the slider?

  Hello
  I want to set a different color for track Slider, slider track is spitted into two sections by slider-button.
  I want to put a left gray, the right of a white.
  Under css only changes the background of the entire track, but how I can change different background color for the slider?
  Any suggestion?
  

  .slider {
      -fx-border-width: 0;
  }
  .slider *.track {
      -fx-background-color:white;
      -fx-background-insets:  0, 1;
      -fx-border-color: #faf0e6;
      -fx-border-width: 1;
      -fx-border-style:solid;
      -fx-progress-color:yellow;
      -fx-border-radius: 20;
  }
  .slider.knobStyle:focused .knob {
      -fx-effect: dropshadow( three-pass-box , red , 5 , 0.5 , 0 , 0 );
  }
  .slider.knobStyle:unfocused .knob {
      -fx-effect: dropshadow( three-pass-box , red , 5 , 0.5 , 0 , 0 );
  }
  .slider .thumb {
       -fx-background-color:rgb(224,225,226);
       -fx-background-repeat:stretch;
       -fx-background-size:stretch;
       -fx-background-position:center top;
       -fx-background-image:url("../images/volume_ball.png");
          -fx-padding: 10;
  }

  I don't know why I can't get the node of the track, track has always set to null and the thumb or the other.

  After that the cursor was displayed on an active scene are you doing research?

  (ex.: after you have added the slider to a scene, the scene for scene, then called stage.show ())