color-search not resolved in SceneBuilder

Similar Questions

• All-in-one Photosmart HP 3310: colors may not print correctly on A4 photo paper.

  My HP 3310 printer gave me great prints for many years, but during the last 12 months, 210 x 297 mm prints threw a desaturated look and brightness has dulled as well. My photos 10 x 15 cm print perfectly.

  I did all the recommended suggestions, cleaning of the print head, aligning the printer even restore to factory default to no effect.

  I use Spyder Pro 5 to ensure that I have the exact colors on my screen.

  I printed via the printer settings and also the settings of Photoshop.

  At the present time, all my photos contest must be overexposed and strongly saturated for previously appreciated results.

  I only use HP photo papers and real HP363 inks.

  I hope someone can put an end to my frustration.

  Welcome to the HP Forums @-g_s70

  I came across your post about the problem you are having and I wanted to respond to help with my suggestions. Please see the guide below to resolve this issue. If the problem persists after resolution of the problem, please try to call the hotline to discuss replacing the printer or the rating of. I'll include contact info HP below to directly reach.

  HP Photosmart 3100, 3200 and 3300 Series all-in-One - the printed colors are not colors should

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• 6500 more E710n-z: black color does not print

  I can not get the black to print.  All the other colors print OK.  Put in a new cartridge blk (though even the former was still 3/4 full) and that has not worked.   A ran the HP print and scan doctor, says all this bbut OK still does not work.  Clean the print heads several times, still does not work. Unplugged and powered by the printer, still nothing.  Any ideas...?

  The here document has troubleshooting which can help solve the black does not print on your Officejet 6500 has more.  Be sure to check the vents.  If the above does not resolve the problem, the message here can help.

• Error: Could not resolve macro... during the sensitive output to HTML5

  I use RoboHelp 2015. I have a project which was created for WebHelp output. When I compile the project to output Responsive HTML5, it compiles, but with the following errors:

  Error: Could not resolve the macro (IndexFilterKewords) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\Availity_Help.htm)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Loading) in file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\indextreeloader.js)...

  Error: Could not resolve the macro (GlossaryFilterTerms) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\Availity_Help.htm)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Loading) in file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\glossarylistloader.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. TopicsNotFound) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. JS_alert_LoadXmlFailed) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. JS_alert_InitDatabaseFailed) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. JS_alert_InvalidExpression_1) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Research) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Cancel) in file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. Aborted) to the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\mhfhost.js)...

  Error: Could not resolve the macro (MSM_CUR_LNG. ResultsFoundText) in the file (P:\! Private\zMigration\AvHelp_HTML5\AvHelp\template\scripts\search.js)...

  I saw another post on the forum about these errors (in version RoboHelp 11) suggested that the problem could be related to permissions. I have compiled out of aid to a few different folders I have all permissions, and I always get errors. Any ideas?

  It is a common problem with RoboHelp projects upgraded from earlier versions RH10. This error indicates that your files language is missing some channels. You can resolve it in one of two ways;

  1. Let the Robo to recreate the language file:
     1. In your project, save it! Language! folder.
     2. Delete the folder.
     3. Trash of the CPD and reopen RoboHelp.

        RoboHelp will create a new language file (and if something goes wrong, restore the backup and try Method 2).

  2. Manually update the language file;
     1. Open the language file! Language!/en_US/RoboHHRE.LNG with Notepad or another text editor.
     2. Find the section
        .
     3. For each error ' MSM_CUR_LNG. JS_alert_LoadXmlFailed', create a new entry that contains the text after point as follows:

     4. Save the file.
     5. Open RoboHelp and regenerate.

  (This does not point to Rick invalidate. "It's just that the problem is related differently.)

• Error message: could not resolve begin time

  Hey

  I try to run landmark two tiles but still get suite errormessage, when the first client tries to calculate the score:

  «Error: cannot start time.» Results missing from one or more time on clients not synchronized *.wrf files "data

  The problem with time synchronization is not because machines al gets theire time from an ntp server.

  *. WRF files missing as impossible, because there is no errormessage even with debug-indicator not lit and in the output directory, there are also all *.wrf files.

  So I do not know why the script is complaining about what it is.

  Here's the complete Score_2_Tile_Test.out:

  {{{

  Computing_results_for_test_with_tile_count: 2

  Run_start 1269771060 {12:11 2010:03:28}

  Start_time 0

  End_time 1269783000

  Run_end 1269783000

  Duration_in_minutes 21163050

  Steady_state_start 1800

  Steady_state_end 9000

  Phase_0_begin 1800

  4200 Phase_1_begin

  Phase_2_begin 6600

  Error: could not resolve the start-time. Results data missing from one or more time on clients not synchronized *.wrf files

  }}}

  I've also attached the directory results nearly complete as * .zip. It might help to find problems

  Maybe someone knows something I can do if I don't have to calculate the results myself.

  Thanks in advance.

  David

  Your timing seems fine.

  It looks like you use a comma as a decimal separator on your client system.  The tilescore script expects a period as the decimal separator.  Please change your language on your client settings to use a period as a decimal separator.

  Do a search and replace of your javaserverX.wrf files / allows the tilescore script complete.

• Could not resolve the import instructions

  Recently, I decided to start messing around with some Java3d. I tried to get a sample program to try to dissect, but I can not even past the compilation. The main problem is the fact that import declarations cannot be resolved. I thought that maybe I was using an obsolete example program, but after further inspection of the Oracle Java3d tutorials, I saw the same import declarations. I downloaded java3d 1.5.1 because I thought that maybe it has not been included in the base java classes. It has not helped me at all. So it is perhaps a problem with the IDE (eclipse) does not not recognize. However, I had no such success with Google so far. I realize that it is more than likely a horribly simple mistake that anyone on a novice understanding of Java would be able to spot. But if someone could help me understand why I can't compile it would be much appreciated.
  
  Kind regards
  Corey
  
  Import instructions that do not resolve

  import com.sun.j3d.utils.geometry.GeometryInfo;
  import com.sun.j3d.utils.geometry.NormalGenerator;
  import com.sun.j3d.utils.universe.SimpleUniverse;
  import javax.media.j3d.*;
  import javax.vecmath.*;

  Complete program

  import java.awt.Color;
  import com.sun.j3d.utils.geometry.GeometryInfo;
  import com.sun.j3d.utils.geometry.NormalGenerator;
  import com.sun.j3d.utils.universe.SimpleUniverse;
  import javax.media.j3d.*;
  import javax.vecmath.*;
  
  // An Egyptian pyramid
  // Base divided into two triangles
  
  public class PyramidExample {
       public static void main(String[] args) {
            SimpleUniverse universe = new SimpleUniverse();
            BranchGroup group = new BranchGroup();
  
            Point3f e = new Point3f(1.0f, 0.0f, 0.0f); // east
            Point3f s = new Point3f(0.0f, 0.0f, 1.0f); // south
            Point3f w = new Point3f(-1.0f, 0.0f, 0.0f); // west
            Point3f n = new Point3f(0.0f, 0.0f, -1.0f); // north
            Point3f t = new Point3f(0.0f, 0.721f, 0.0f); // top
  
            TriangleArray pyramidGeometry = new TriangleArray(18,
                      TriangleArray.COORDINATES);
            pyramidGeometry.setCoordinate(0, e);
            pyramidGeometry.setCoordinate(1, t);
            pyramidGeometry.setCoordinate(2, s);
  
            pyramidGeometry.setCoordinate(3, s);
            pyramidGeometry.setCoordinate(4, t);
            pyramidGeometry.setCoordinate(5, w);
  
            pyramidGeometry.setCoordinate(6, w);
            pyramidGeometry.setCoordinate(7, t);
            pyramidGeometry.setCoordinate(8, n);
  
            pyramidGeometry.setCoordinate(9, n);
            pyramidGeometry.setCoordinate(10, t);
            pyramidGeometry.setCoordinate(11, e);
  
            pyramidGeometry.setCoordinate(12, e);
            pyramidGeometry.setCoordinate(13, s);
            pyramidGeometry.setCoordinate(14, w);
  
            pyramidGeometry.setCoordinate(15, w);
            pyramidGeometry.setCoordinate(16, n);
            pyramidGeometry.setCoordinate(17, e);
            GeometryInfo geometryInfo = new GeometryInfo(pyramidGeometry);
            NormalGenerator ng = new NormalGenerator();
            ng.generateNormals(geometryInfo);
  
            GeometryArray result = geometryInfo.getGeometryArray();
            
            // yellow appearance
            Appearance appearance = new Appearance();
            Color3f color = new Color3f(Color.yellow);
            Color3f black = new Color3f(0.0f, 0.0f, 0.0f);
            Color3f white = new Color3f(1.0f, 1.0f, 1.0f);
            Texture texture = new Texture2D();
            TextureAttributes texAttr = new TextureAttributes();
            texAttr.setTextureMode(TextureAttributes.MODULATE);
            texture.setBoundaryModeS(Texture.WRAP);
            texture.setBoundaryModeT(Texture.WRAP);
            texture.setBoundaryColor(new Color4f(0.0f, 1.0f, 0.0f, 0.0f));
            Material mat = new Material(color, black, color, white, 70f);
            appearance.setTextureAttributes(texAttr);
            appearance.setMaterial(mat);
            appearance.setTexture(texture);
            Shape3D shape = new Shape3D(result, appearance);
            group.addChild(shape);
  
            // above pyramid
            Vector3f viewTranslation = new Vector3f();
            viewTranslation.z = 3;
            viewTranslation.x = 0f;
            viewTranslation.y = .3f;
            Transform3D viewTransform = new Transform3D();
            viewTransform.setTranslation(viewTranslation);
            Transform3D rotation = new Transform3D();
            rotation.rotX(-Math.PI / 12.0d);
            rotation.mul(viewTransform);
            universe.getViewingPlatform().getViewPlatformTransform().setTransform(
                      rotation);
            universe.getViewingPlatform().getViewPlatformTransform().getTransform(
                      viewTransform);
            
            // lights
            BoundingSphere bounds = new BoundingSphere(new Point3d(0.0, 0.0, 0.0),
                      1000.0);
            Color3f light1Color = new Color3f(.7f, .7f, .7f);
            Vector3f light1Direction = new Vector3f(4.0f, -7.0f, -12.0f);
            DirectionalLight light1 = new DirectionalLight(light1Color, light1Direction);
            light1.setInfluencingBounds(bounds);
            group.addChild(light1);
            Color3f ambientColor = new Color3f(.4f, .4f, .4f);
            AmbientLight ambientLightNode = new AmbientLight(ambientColor);
            ambientLightNode.setInfluencingBounds(bounds);
            group.addChild(ambientLightNode);
            
            universe.addBranchGraph(group);
       }
  }

  Hello

  -The latest 3D Java version is * 1.5.2*. Uninstall older versions.
  -Home Java 3D: http://java3d.java.net/
  -3D Java project: http://java.net/projects/java3d
  -3D Java downloads: http://java3d.java.net/binary-builds.html
  -Start with one of the examples of "j3d-examples-1_5_2 - src.zip" 3D Java
  -Use eclipse * 3.6.2 *, it should recognize the 3D Java jars if they are installed in '... \jre\lib\ext\'. See also Java3D + new Version of Eclipse-> restricted access (solution + question)

  August

• ORA-12154: TNS: could not resolve the connect through TOAD VAT registration

  Hello
  
  I want to configure the TOAD to connect to servers on my place of work.
  
  I installed on my laptop desktop
  
  Toad for Oracle 9.7
  Oracle client 10g Express edition
  
  I am able to connect to the server to other servers in the office at the level of the unix.
  
  But I get this error message.
  
  Oracle (from the server to access) version: 11 GR 1 material
  
  
  
  See you soon,.
  Malika

  Hello
  It is not related to Toad, check the TNS entry in your TNSNAMES.ora & make sure what is it pointing to the appropriate service name.

  Error: ORA-12154 / TNS-12154
  Text: TNS: could not resolve service name
  -------------------------------------------------------------------------------
  Cause: The specified service name is not defined correctly in the
  TNSNAMES. ORA file.
  Action: Perform the following checks and fix the error:
  -Check that a TNSNAMES file. ORA file exists and is in good
  Place and accessible. Refer to the specific manual of operating system
  For more information on the location and the name required.
  -Check that the name of the service exist in one of the
  TNSNAMES. ORA file and add if necessary.
  -Make sure that there are no errors of syntax anywhere in the file.
  Search for unmatched parentheses or stray characters.
  Any error in a TNSNAMES file. ORA file makes it unusable. See
  Chapter 4 in the SQL * Net V2 Administrator's Guide. If
  possible, regenerate the configuration using the Oracle files
  Network Manager.

• Could not resolve an error in the component implementation

  I use the http://www.quietlyscheming.com/blog/2007/01/23/some-thoughts-on-doubt-on-flex-as-the-best-option-orhow-i-made-my-flex-images-stop-dancing/ SuperImage component
  
  The problem I have is that when I try to use this component in a TileList ItemRenderer, I get the error could not resolve < qs: SuperImage > to an implementation of the component.
  
  In the tag of my Application, I use xmlns:qs = "' qs.controls. *" which allows me to use the SuperImage component anywhere else, but the error occurs when I use it in one component. "
  
  I have searched for an answer but couldn't find something that worked. Can someone help me understand what the problem is? Here is the code where the error occurs.
  
  < mx:TileList >
  < mx:itemRenderer >
  < mx:Component >
  < mx:VBox >
  < qs: SuperImage / >
  < mx:Label / >
  < / mx:VBox >
  < / mx:Component >
  < / mx:itemRenderer >
  < / mx:TileList >
  
  Thanks for any help.

  I was able to understand the problem.

  I had to add the xmlns to the item as well as the application. The documentation does not say that it is a valid property, but it works.

  Thanks again for your help.

• Re: Satellite P300 - display colors are not displayed correctly

  A few months ago appeared a strange problem with my laptop screen as you can see in this video made by me: http://www.youtube.com/watch?v=tjpsXNB6prc

  I tried to tilt the cover but without results. Sometimes it comes back normal picture all of a sudden. If I close the lid when I stopped the laptop, when the next market problem appears.

  With the help of Corel, I noticed that the RGB colors are not displayed correctly. I connected the laptop to a VGA monitor and the image was normal.

  I would like to know what the problem is so that I am able to fix it myself.

  Thank you.

  Hey Buddy,

  It of great that you've made a video of your problem, most other users don t do that, but it makes history. :)

  In any case, it is really hard to say what part is causing this problem. Either it's internal display itself or graphics card. Easiest way to check this is connect an external monitor and check what is happening.

  So if it was a normal external VGA monitor image it seems to be the graphics card. This means that the motherboard must be replaced and this can be done from an authorized service provider. Then get in touch with the guy and ask for help.

• El Capitan DNS server does not resolve host

  The server does not resolve host 'root '.

  I upgraded from an environment of Snow leopard server to the El Capitan 5.0.15 server.

  The server is running on a mac mini, which is now about 2 weeks old basis.

  Follow the instructions in the DNS settings. Hosts such as www.example.com work perfectly well.

  However, the server does not resolve example.com. On Snow Leopard server, I used to create records for hosts like example.com as www.example.com, but this seems to be not not more possible.

  Any idea?

  Thanks, XL

  to be more precise, that's what I get when a ping is made:

  Ping: impossible to solve example.com: Unknown host

• ORA-12154 tns could not resolve the specified correct identifier

  I am facing the following problem:

  labVIEW 2012 32 bits 64 bits of Windows 7, 10.2.0.1.0 oracle client (32-bit).

  I created a DSN from Data Sources (ODBC) (32-bit version of what in % windir%\syswow64\odbcad32.exe) pointing to an instance of Oracle 10 g.

  I have test the DSN in this way (IE. Data sources (ODBC) and the connection is successful (which means that the tnsnames.ora is correct).

  I use the "DB tools Open Connection.vi" in order to get connected to this database, passing as parameters the DSN above, the user name and password.

  I get the error:

  ADO error: 0x80040E4D
  Exception occurred in the Microsoft OLE DB provider for ODBC drivers:

  [Oracle] [ODBC] [Ora] ORA-12154: TNS could not resolve the specified correct identifier

  all will help much appreciated

  Thanks in advance

  Hello everyone.

  I already solved the problem (work until late Saturday).

  the solution was to install the latest version of the Oracle customer, namely: Oracle 11 g Release 2 CLIENT for Windows 32 (11.2.0.1.0).

  Now everything works OK.

  I also tested in Windows 7 32 bit (the .vi even and the same Oracle client). This will also OK.

  Thans a lot.

• Outlook Express 6: could not resolve the name of the beneficiary - abandoned user command

  original title: could not resolve the name of the beneficiary - abandoned user command

  When trying to send outside of Outlook Express 6 (right click, send to or by clicking on a hyperlink email), the above message appears.

  I lived http://support.microsoft.com/kb/2398839 with nothing next set-by-step does not.
  Any idea?

  AVG is known to cause problems with OE.  One thing that must be done is to ensure that is NOT set to scan the mail.  I know that the only way in the past to avoid this problem is to uninstall AVG and then reinstall it with the email Scanner option is disabled.  I don't understand what else could be blocking, unless it is another program running in the background.  I have recently spent 6 hours trying to resolve a problem where a program installed on a computer just wouldn't work, and I tested it on another computer and it worked fine.  I turned off and installed in safemode, and he still wouldn't run on this computer.  I told my friend that computer, it is that the only thing left that I could think of to try to uninstall the anti-virus software (which will move without a name) and see if it would make a difference (I had already turned off all its services) and of course the program executed instantly as soon as the machine was gone.  So I put MSE (www.microsoft.com/security_essentials/) about it, and gave it to my friend.  The moral of this story is that the running software can interact with windows to break and sometimes the only way to identify the culprit is to get rid of all works we can imagine.

  That said, I can't really fault necessarily on dysfunction something else installed on your computer, but if you went through all the hoops and it still doesn't, which suggests a background process running blocking things.  It is in any case my point of view on this.

  Another thing.  Under this key:

  HKEY_CLASSES_ROOT\mailto

  the hull | Open | order value must indicate:

  /Mailurl:%1 "%ProgramFiles%\Outlook Express\msimn.exe".

  but it is probably already.

  Steve

• E printer HP PhotSmart 6525: color is not printing

  Color does not print when the color is selected.  I have replaced the cartridges with new HP cartridges.  run align them and clean print head a couple of times, but nothing is working.  The best I get is black if necessary and orange/rust where he see the tru colors.

  Hello

  The only solution to this problem is to make sure there are at least 50% of ink cartridges and cleaning the print head for at least 3 times. Wait 15 minutes, and then try to print it.

  If the problem persists, it might be a problem with the printhead that is a fixed and cannot be replaced. That is why its time to replace a printer.

  Please call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• The red color does not print correctly. Have just replaced the Red cartridge and the problem remains

  HP Color LaserJet 2600n, Windows 7 64 bit

  The red color does not print correctly, it of a weak orange and turn yellow on the edges.

  The problem is, even if we just replaced the cartridge.

  The other colors are fine.

  I'm sorry.  It's a consumer forum and your printer is a product of the company; would be better served on the forum planned for it.  The business forum will be experienced in printers of business community members and expose the post more than members with the knowledge needed to answer.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UDQAKt2PUaA

• Virus & spyware definitions update failed. error code: 0x8024402c. Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

  Virus & spyware definitions update failed.

  error code: 0x8024402c.

  Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

  Here is an article that meets your specific error message regarding updates:http://support.microsoft.com/kb/900936.  I am surprised that the error occurs with all the updates, but there may be a difference between them that causes the problem for definitions, but not for others.  I hope that this will solve the problem.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.