Color space 32-bit making the letters disappear

Similar Questions

• Satellite U400-22Z - random character of space in addition to the letters types

  Hello!

  On a whole new Satellite U400-22Z by pressing the letters on the keyboard sometimes it types a space character in addition to the letter pressed after the letter. for example, by typing the word "test" it may look like in "you st" or "t" or your "t" (although if the problem appears, it allways inserts space at the same location in a word give, then it would always be "t's" If that Word is typed several times). the problem occurs randomly, sometimes, that the problem does not appear for an entire session or day, sometimes several times after another. the probleam appears in several programs (IE, explorer, firefox, Word, even to the connection of the user to the start!)

  I tried (after talking with toshiba support) and an update - chip and bios does not work remove the problem. even after a complete roll-back to the original state of pre-instaled/factory using the disk HARD recovery has failed. It is very difficult to locate/pinpoint the problem to some show because the problem might appear only a few days and then "strike" again...
  I am running vista home 32 on the laptop, and given that the bug appears when using only the installed software origin I dosent seem to be caused by something other than the original software...

  Any help would be greatly apreciated!
  Tankxs everyone!
  Greetz, cybersurfer

  Hello

  You must update the BIOS mate.
  I am owner of U400 and I did update the BIOS as well.
  He solved some annoying problems.

  PS: Disable Touchpad while typing I still accidentally hit and so my Messenger jumped to another line

• Projection of images and the question of the color space

  We are having a discussion in our photo club. We use a projector to project the images of the competition. For years, we used Faststone Viewer to project images. We have the usual problems of people not calibrate their monitors and sometimes the colors match does not, but it worked pretty well.  Now that the people who handle the projection are competent in LR, they use LR on a Windows laptop, to organize and display the images via the projector. The projector is a projector of sRGB VGA.  Some argue that LR will cause problems because it uses the Adobe RGB color space as the space of display colors. (We know that the native color space is ProPhoto). Others think it will display images in space sRGB color to the projector as you can when you export an image. I can't find anything in Adobe help pages on this subject.

  Here is a contribution to the debate to give you an idea of what some people are talking about:

  I understand that LR will send bits of images (in the Adobe RGB color space) to the Windows API and in turn the bits are returned on the LCD screen and exit VGA via LCD/VGA color profiles associated. That is my understanding of the viewer FastStone sends the image bits being without modification in the color space. LR sends the bits altered the Adobe RGB color space. Assuming that both programs require the same Windows API, the images must return the same, but they do not. My conclusion is that the former is in sRGB and the latter in Adobe RGB. I guess they call the same APIs because you can open a jpeg file in Windows Picture Viewer (applet in Win7) and see a different rendering of FastStone, it does not use the color managed API.

  Anyone who can shed some light on this delicate subject?

  You actually want an app like Lightroom or Bridge to view images on your projector and not the unmanaged faststone Viewer or something like. Lightroom translated correctly the image on the destination for the projector profile regardless of the original color of images space. It is best to calibrate them and profile projector in addition to your monitor. Some of the highest fine adjustment washers support projectors too. It is rare that these projectors really are sRGB. They are usually somewhat narrower. Some of the more recent are wider gamut when using LEDs or lasers instead of bulbs.

• dv8000z Windows 7 32 bit updated to XP and the noise disappeared.

  My dv8000z has been upgraded to Windows 7 32 bit and the noise disappeared. I installed sp35908. When I ran this program as a Vista 2 that it will fail to install, with comment, message "cannot find the MEDIA device for the driver. Any advice?

  Hello:

  Try this driver.  If it does not install automatically then proceed to the next step.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46818-1 & CC = US & DLC = in & LC = on & os = 2093 & Product = 1147474 & sw_lang =

  Conclusion of any windows error.

  Go to Device Manager and click on the multimedia audio controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software, and at the bottom of this window, let pick me from a list of drivers for devices on my computer.

  Select disk, and then navigate to: it\: SWSetup\sp34567\CPL309Ba and select the Conexant AC-Link Audio device from the list and see if the pilot goes like this.  Reset.

• problem with the color-space conversion

  I am under Photoshop CS5 x 64 with the latest updates, with the latest updates win7x64 too.

  Pictorial seal use AdobeRGB color space to work. The histogram of the image is good.

  If I convert the image in sRGB color space, the Red becomes saturated.

  This very clearly shows the histogram of the Red layer.

  This problem occurs in colorimetric settings perceptual and relative, as well as Photoshop X 86

  With its engine color of Microsoft, the red channel is less saturated.

  In my understanding, in perceptual mode, color-space conversion should create any saturation in the image.

  Please can you tell me if this behaviour is expected?

  Concerning

  Nicolas

  It is simply that your shadow (if there are shadows in space) is not neutral - they have a strong, dominant blue/cyan:

  

  These deep blues are outside the gamut sRGB and clip. The red channel (the opposite or complementary color) wants to go further, but can't.

  If it is a raw capture, you can use the split toning slider for red push in the shadow (to make them neutral). Or you can use curves in the Adobe RGB file, or the channel mixer or a number of other things.

• Tags of the color space can be identified in Lightroom 3?

  I'm looking for an easy way to check if a color space tag is associated with a specific (for example an imported JPEG) images in the library Module.  Anyone know?  I can't seem to find a line that in the view of metadata.

  LR does not show this information, he correctly interprets an ICC profile embedded import, but therefore the photo is in internal LR color space.

  Use a third-party utility (ExifTool, etc.) to search for the color space tag and/or the embedded ICC profile.

  Gossweiler beat

  Switzerland

• PIXMA Pro 100 color space issues

  Hello

  I have a few questions related to printing from lightroom, I'm new on this bare with me.

  (1) I have a canon 7 d I shoot in Raw 12-14 bit? and most of my treatment is done in lightroom, so no need to export to photoshop, however if I would be this export as 16-bit tiff or Jpeg? So, if I had to after post-processing in photoshop then back in lightroom, this would allow only me to print in tiff or jpeg format is correct as a psd/jpeg file?

  (2) given that I only edit in lightroom I can print directly in Raw CR2 format 12-14 bit using canon plugin pro printing studio? or is it exported to the translator as a 16-bit file? and then use the ICC profile that is (canon paper) for best results paper mill, I lose a quality of colour printing by printing from Raw 12-14 bits instead of 16-bit tiff/jpeg.

  (3) using the profiles of ICC paper mill, the original raw will deposit 12-14 bit sRGB 7Dcamera be translated to the printer default Lightroom or is the color space is not necessary because I have not converted to 16-bit in post processing?

  (3) I did not have my calibrated monitor yet but intend to do so in the future, but until then I'm not messing around with pro, photoRGB Pro or Adobe RGB or sRGB mode.

  (4) if I use lightrooms canon pro printing studio Player is the color space translated automatically the settings of my camera or do I have to activate it in lightroom first?.

  (5) I use a Mac running yosemite 10.10 and to learn more about ICC profiles where the factory ICC profiles download how and where to store can you recommend a joint Web site to learn how to do this on a mac?

  (6) as you can see I want to just print the best images from the camera to the printer without much science involved but I'm willing to learn, but get confused with the post-production of workspace different menu software for best results, that I'd do it prosume until I get my proffesionally calibrated monitor would print from Raw with the factory ICC profiles?

  7) color space and calibration of the parameters are all about what you have on the print screen or it is mainly for the depth of extra color to print?

  I can calibrate my monitor on adobe RGB and have my camera shoot on adobe RGB-calibration with the software, but said I need correct color surveillance devices? If I were to do this and still just used paper ICC profiles the footprints would be better?

  My first impressions were excellent, very similar to what I see on the screen in all cases but I checked the lightrooms settings and these are on Pro photo RGB for external editing and it of color space for printing pluggin also studio, or is it just native Raw sRGB if I change the settings it says I'll lose the color space maxium potential.

  Sorry for the influx of questions :-)

  Thomas

  Hahnemühle has an excellent explanation on downloading and adding profiles for PC and Mac

  http://www.Hahnemuehle.com/en/digital-FineArt/ICC-profiles/installing-profiles.html

  Print Studio Pro is rather obscure on the use of profiles than those installed, but it's pretty simple.

  In the area of setting printer settings choosing fine arts I or II (I used one and it seems to work)

  Then in the color management box, use the pull down to find the right profile added.

  (I posted this before, but the post was deleted for some unknown reason)

  

• Is there a way in LR to say what color space photo is stored in?

  I have a lot of files Tiff 16-bit in my Lightroom library.  I'm looking for a simple way to determine what color space has been assigned to them.  The only way I know to find out is to open them in Photoshop.  Lightroom has a way to tell me?  This seems like a pretty basic capacity for high level like Lightroom photo software, but I can't.  File Tiff still has numbers RGB of origin who had the RAW file, or have been changed as a result of the color space used?  If the original numbers are still there, so maybe that the assigned color space is not serious, and I can change it if I want to? I'm using Lightroom 5.5 on a windows 7 64 system.

  In Lr5 - Yes, well: sorta...

  No display on the right metadata, or in lib filters, but smart collections have rule - see 'color-> color Source profile. Unfortunately, one must know ahead what to look for, but still: it's better than nothing...

  For example:

  

  Rounds to the top of all the photos with the Adobe RGB profile.

  And you can have another with "contains the sRGB..."

  ~ R.

• Lighroom color space

  What print to file or export in LR, can someone clarify if LR transforms the space of color for the profile selected, or is it simply to embed the specified profile?  To make things more confusing, knowing that the native LR color space is MelissaRGB, if the selected profile is built-in, what color space is images LR conversion for export or print in the file?  I know that there is the preference of surface-mounted to convert sRGB, ProPhoto, AdobeRGB when sending to Photoshop.  However, there is no preference for printing or export.

  Thank you all!

  "Embedded" is what is contained in the file. If it doesn't have a embedded profile, viewing programs must provide a default profile.

  Your editor has a default profile that it is configured to use. For LR ProPhotoRGB, PS is often AdobeRGB. When you load an image into the editor, where the profile in the file (embedded) does not match the profile of 'work' to the editor, you get a prompt for how to resolve the incompatibility:

  -use the content profile (incorporated) in the file, or

  -convert the profile from the profile of 'work' to the editor file.

• RGB color when she writes to the file

  Hello everone,

  I have this script to read the colors of an image and write the color values in a csv file.

  var a = new File("~/test.csv");
  
  
  a.open('w');
  app.activeDocument.colorSamplers.removeAll();
  var theSampler = app.activeDocument.colorSamplers.add([0,0]);
  
  
  for (var y = 0; y < app.activeDocument.height; ++y) { 
      for (var x = 0; x < app.activeDocument.width; ++x) {
                      theSampler.move([x, y]);
                      a.write("\"" + Math.round(theSampler.color.rgb.red) + "," + Math.round(theSampler.color.rgb.green) + "," + Math.round(theSampler.color.rgb.blue) + "\",");
            }
      a.write(";\n");
  }
  
  
  a.close();
  

  Now when I open the csv file and compare it to the values I've read in Photoshop by using the color picker that they are not the same.

  How can I get the right values? What color space is used in the scripts colorSampler.

  Thanks for advise.

  Also, I think you might want to put the sampler in the Middle instead of the upper left pixel.

• In PS5 color space management

  I have a picture that was taken in RAW format with Adobe's RGB color space.

  I would like to present this photo in a contest.   The contest prefer the photo be a JPEG in sRGB.

  I edited the photo, so I won't do it again.  I think I could change the color space when I put the photo in PS

  It is a way I can change the color space to sRGB and always use the editing I've done?

  Edit > convert to profile > Destination: sRGB

  Save a copy

  PS

  File > file Info

  allows you to add metadata such as copyright, url, legend...

• Color space?

  Hi all

  I am a new user of LR after several years of opening.

  How can I know the photo is located in the color space?

  Thank you

  B Dick

  Lightroom uses a modified version of the Pro Photo RGB called Melissa RBG for the "display of color space. Here are two links with more details on LR/ACR color spaces:

  http://www.ppmag.com/reviews/200701_rodneycm.PDF

  http://www.digitaldog.NET/files/CMS_in_LR%20_CR.PDF

  When you view a slide show in LR color space automatically adjusts with the updated operating system monitor profiles in place for the connected or display devices (sRGB, profile of Monitor Calibration, etc.). When exporting a slideshow images are automatically converted to the color space of the target (PDF, video) format. For ' file > export ' you can select sRGB, Pro Photo RGB, Adobe RGB, or "system profiles" available under 'other '. On my system Costco look a profiles for the glossy and luster, I created are available under 'Others' color spaces.

  The bottom line is that fortunately there is no need to concern yourself about LR display and use of the color spaces.

• RGB to the transfer of the HSI COLOR SPACE

  An organization can help me for example how to change the color space of the image RGB to HSI image and then save and display the new image

  

• 'Space Hulk - Vengeance of the Blood angels' wrong view for Windows 7 64 bit

  Trying to play 'Space Hulk - Vengeance of the Blood angels' which is a Windows 95 game, after putting in place he moaned it won't work without a "dplay.dll" after downloading (here: http://www.dll-files.com/dllindex/dll-files.shtml?dplay) and put that in the directory, the game starts, the sound is fine but it displays the game all wrong, it should look like this :

  http://DL.dropbox.com/u/666433/SpaceHulk/foto.jpg

  But ends up looking like this:

  http://DL.dropbox.com/u/666433/SpaceHulk/HULKW95-2010-09-08-16-27-57-24.jpg

  http://DL.dropbox.com/u/666433/SpaceHulk/HULKW95-2010-09-08-16-05-39-17.jpg (EA logo)

  I tried to use all different compatibility modes without success, to get this game runs on Windows XP, all 32 bit, I had to do was to disable Direct Draw but the option is no longer available in Windows 7:

  http://DL.dropbox.com/u/666433/SpaceHulk/Windows7DxDiag.PNG

  What can I do?

  Hello

  Space Hulk - Vengeance of the blood Angels is not compatible with Windows 7. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=space%20Hulk%20-%20Vengeance%20Of%20The%20Blood%20angels&OS=64-bit&page=1

  Space Hulk - Vengeance of the blood Angels seems to be a very old-fashioned (95). It might not work with Windows 7, but you can try to install the game in compatibility mode and check if you're able to play the game, but do not know if it will work or not. Follow the steps mentioned in the article given below to install and play the game in compatibility mode.

  Make older programs in this windows version

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not work then, try to run the game in XP (virtual mode) mode and check if you're able to play the game. To do this, you may need to download virtual XP mode. Check the links below and download and install the program on your Windows 7.

  Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Note: XP mode only works if you have Windows 7 Professional / Enterprise / ultimate.

  The manufacturer of this game is Electronic Arts (EA), I suggest you contact them for additional support, click on the link below.

  http://www.EA.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the color of 8-bit to 16-bit on a screen monitor color flat viewsonic va702b

  How can I change the color of 8-bit to 16-bit on a screen monitor color flat viewsonic va702b

  Right click on some empty your desktop > properties > settings

  I hope this helps.