Colors of the icons in the content of Print Document window

Similar Questions

• Change the color of the content area of a table

  Is there a way to change the color of the content area of a table? I want to set the table to be transparent, but I don't know how to do this.

  

  I'm not exactly clear on what you're trying to reach. However, I tried to adjust the table to transparent body with the Brush tool, and it's not enough. Then I did the following:

  (1) emphasize the table (i.e., border of crawling ants)

  (2) in the menu bar, select Edition > control to customize...

  (3) in the new window pop up, go to the menu bar and click on the key icon to make a pair of tweezers.

  (4) pull out control and use the Brush tool to make the body of the table and below transparent location plan.

  (5) save it as you see fit, as the Type Def or Strict Type def.

  A gross example is attached.

• Hi I am currently subscribed to PS CC but I don't think I have the latest version.  I believe this because I do not get the new Welcome screen and no new feature as structure and color in the content aware patch tool.  I checked for you

  Hi I currently have a subscription to the CC PS, but I don't think I have the latest version.  I think this because I don't you the new Welcome screen and do not have new features such as the structure and color in the content aware patch tool.  I checked the updates and it tells me I have the current version.  I check in PS I version 14.2.1.  I also have CS6 installed on my PC, it could be somehow be do something or I'm doing something wrong.  Anyone have any suggestions.

  It's under 'find new applications '.  You must scroll down to see it.

  

• To view all of the content of this document, you need a later version of the PDF Viewer.

  I'm tryinbgn to read some PDFs on a website but get this message"

  To view all of the content of this document, you need a later version of the PDF Viewer. '

  
  

  I have the most updated version and another pdf on the site opened just well... suggestions?

  
  

  Hi richardr32727316 ,

  Please provide the exact point of the software & OS installed on your system

  Would you please check with different Internet browser.

  Also to disable the firewall & security services to reproduce the problem.

  This phenomenon occurs with all documents or with other institutions.

  Please refer to this article:- https://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  I would like to know if it works.

  Kind regards

  Christian

• I'm filling out a form that is available on a site. When I click on the option to fill out and submit the form 'online' a pdf document is displayed in chrome with the following text "to display all of the content of this document, you need a later version

  I'm filling out a form that is available on a site. When I click on the option to fill out and submit the form 'online' a pdf document is displayed in chrome with the following text

  «To display all of the content of this document, you need a later version the viewer PDF.» You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html for further support, go to www.adobe.com/support/products/acrreader.html"

  Needless to day, I installed the latest version. I even reinstalled using the link in the message, but nothing helped. Whenever I click on the link to go forward, I get the same message. Question: (i) is it my PC/software (Vista), (ii) is the site where I'm trying to submit the form, or (iii) is it the software acrobat reader. Note that I used successfully the last version to fill out and sign forms.

  It is none of them. It's Chrome, which is ignoring Adobe Reader and showing the message.

  Solution: just save the document (with the message) to your desktop. Then open it in Adobe Reader. The 'real' should then display.

• Change the color of the names of folders in Windows Explorer (7)

  In windows Explorer, I have a list of folders. I wish I could change the color of each folder name. Each record represents one of my accounts (and inside are visit reports, files, etc) and I would like to catagorise every folder in account as their end market sector, using color. Is this possible?

  Hello

  There is no option in Windows, you can safely use to change the color of the folders. However, you can browse the Internet using your favorite search engine for an application that can change color of folders.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How to add space before the content when printing or export PDF

  Hi Experts,
  In OBIEE 11.1.1.6.0.
  It has a single report worth two requests, in order to show the structure of the hierarchy, I add a few spaces in front of the content, however, when I print or PDF exprt, it will be gone. How to solve this problem?
  
  A single method (maybe it's BUG):
  Inter-generational column-> data-> treat as html Format
  Then in Edit formula, enter the following code: "< table > < tr > < style td =" padding-left: 20 ">" | "Time '." "" By name of half | "" < table > < /tr > < / table > ' "
  When I print or PDF exprt, it will display the HTML to PDF.
  
  Second method:
  Inter-generational column-> data-> Text Format gross (do not break spaces)
  "Then in Edit formula, enter the following code:" "| Time '. " By name half. "
  When I print or PDF exprt, spaces will be missing in the PDF format.
  
  I try to make many methods, but can't find the right solution to add spaces before the content of the second report to see the structure of the hierarchy as below:
  CombinedColumn (year and month column combined)
  2009
  -200901
  -200902
  2010
  -201001
  -201002
  Note: '-' in the name of space
  
  Is there a good suggestion or the method associated with this problem? Please help me to find or give me better advice. Thanks for your kindly help.

  Hey Kobe,

  To achieve this,

  2009
  -200901
  -200902
  2010
  -201001
  -201002

  You can use properties of column-> right = Horizontal alignment and Vertical alignment = at the top, but you have multiple queries in your report. The approach is to differentiate the different levels and apply conditional formatting. Try this approach,

  1. click on the request combined so that you can see the option "Add the result column" in the left pane
  2. click on 'Add a result column', in the type of column in your time dimension column (if the column is first has type saw_0)
  3. yet once, click on 'Add column result', enter the column formula: case when (saw_0) LENGTH > 5 then 2 1 other end

  Here LENGTH (saw_0) > 5 will return only the month records (i.e) 200901,200902 etc.

  4. now click on properties on the column to the new column added in step 2, goto-> add a Condition of-> conditional formatting select the column added to step 3->

  -Case when (saw_0) LENGTH > 5 then 2 1 other end = 2 then format-> right = Horizontal alignment and Vertical alignment = Top

  This indentera the month right column. This will work when exporting to pdf format.

  Kind regards
  DpKa

• Navigation of the keyboard in FM10 document window

  1. How to switch between document windows using the keyboard? CTRL-F6 does nothing. CTRL + Tab switch between the panels and the active document.
  2. How can I switch to and restore a document the keyboard iconized window? Select the file from the window > Documents seems focuses on the tile of document reduced, but if I press Alt-space and select Restore, impacting on the window of the application instead of the document window.

  ALT - w d opens the list of open documents. Then, by typing the first letter

  cycles of file document to her name.

• This issue is still pending. My PhotoSmart 5510 continues to go offline during the generation of printed documents.

  I have a PhotoSmart 5510 and a Toshiba i7 Quad 4 laptop running Windows7 with a Trendnet Wireless router.

  My PhotoSmart 5510 disconnects when printing is generated.    All systems are go: online wirelessly connected wireless, does not not offline, set as the default printer, checkmark, etc..  Sometimes it will make an impression and disconnect and sometimes it will disconnect the first time and will not be printed.

  If I run the diagnostic utility I can usually get it online.  But the said diagnostic utility it is disconnected and the problem is not "resolved".

  It also has a problem with the USB.  If I've set up as a USB printer will crash the entire operating system and laptop computer will not restart unless the USB is disconnected or if the printer is turned off.  This does not happen with my laptop computer on the same Lexmark printer.

  obewan,

  This article should help to keep the Wi - Fi connection (including things like setting a static IP address for your printer to avoid the crash between you OS/router/printer):
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Photosmart 5515 appearing as a regular printer and the other grayed printer under windows 7.

  I have windows 7 32-bit, with 500 GB disk and 4 GB of ram. J’ai récemment supprimé tous mes pilotes usb et puis réinstallé, parce que je recevais l’écran bleu de la mort (BSOD) chaque semaine ou deux, prétendument causé par le pilote usb d’etron de gigabyte. My motherboard is a gigabyte GA-A75-D3H.

  I went through several iterations recover my usb drivers and working properly. The last problem seems to be with the printer driver. I have just turned the printer off, removed the two printers from the list of devices and printers, and back in the printer market. The drivers once again and the printer "shadow" is back.

  I tried printing HP and doctor scan, and it is a photosmart 5515 says he was not installed. And there does appear to be a way to remove it from its list of HP devices.

  I don't know what to do next. I used windows xp for years and I'm quite familiar with it, but I'm still learning on windows 7, so I don't know what would be my next step in this process of elimination of the printer "shadow" disappear for good.

  It turns out that the greyed out printer still had something left in its queue. It was not connected to any port, so I plugged in the port for the regular printer, and it printed a few things. And now, the greyed out printer disappeared, so I guess that the queue to be empty. Problem solved.

• Why my C4780 scanner started scanning colored on the top of each document long lines?

  I have cleaned the ink cartridges; installed new cartridges; realigned; restarted; Downloaded the new driver; driver and firmware update; Finally, ask for help.  When scanning (not not when printing) it scans documents, and when you view the scan on the computer screen, it long has color lines placed on the original document, regardless of whether the original doc was a photo or an impression, either black and white or in color.  Is this something that can be adjusted?  Thank you!

  I think that your scanner is dead.  Make a copy of the front of the printer.  If the copy has these lines, the scanner is probably dead.

  You can try to reset the printer by turning it off, unplug the power supply from the back of the printer for one minute, then plug back in and turn on.

• red color on the web is printing on yellow paper

  When we look at site the red color is yellow printing on paper

  Hello
  1 does with a particular Web page or it occurs with all Web pages?
  2. what happens when you print offline?
  3. What is the brand and model of the printer?
  4. have you recently changed the cartridge?
  5. Since when are you facing this problem?
   
  Looks like there could be some problems with the ink cartridges; Please provide us with the required information so that we can better help you.
  Try these:
  (a) in the print dialog box, select your printer and click Properties.
  (b) set the paper Type on paper that most resembles the paper that you are profiling.
  (c) set to Off color management.
  Note: In some printer drivers, select advanced or customized to find these options.
  You can also check:
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/printing-options
  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

• Select the text block to get the content, save and close Windows - Java -.

  Hi guys!

  I made some scripts for Photoshop and now I'm doing something for InDesign, but this one is Kind ' more difficult.

  Let me explain it to you:

  I this 'model' document, it is a file where I have all positions and points for "merge data" do his work. And he does it perfectly, I can create all the fine merged documents, the solution that im working for is to get one of the fields that the "merge data" is completed to be the file name, and then save the file and close it.

  This text box is going to be the name of my file that has a special paragraph Style which is unique on the document, I don't know if it's useful.

  Oh sure, once the work is done by the fusion of data where the script should start now I have something like 15 (do not forget that it is a random number, depends on how many references I have in my Data Source) ready documents save and close.

  I have yet to get started, looked for examples, but nothing came to my mind, any help?

  Thanks guys and I ask you to apologize for grammar mistakes, I'm Brazilian.

  CyA!

  And he crashed right into the first record where I messed up it?

  I thought I was pretty clear when I said:

  I didn't notice you had wrapped all in a while loop. Who's going to make the problem worse. Which does not seem that this would cause a problem?

  Why did you do that? I told you to use:

  var i, name, doc;
for (i=0; i   doc = app.documents[i];

  And you changed anything else that I not tell you to do:

  while (app.documents.length) {
  doc = app.documents[0];
  var i, Ref, doc;
  for (i=app.documents.length-1; i>=0; i--) {
    doc = app.documents[i];

  It is the cause of some, but not all of your problems. Why did you do that?

  In all cases, your entire script should look like this (decrement loop):

  var i, Ref, doc,
      Pasta = Folder.selectDialog("Selecione a pasta de destino dos arquivos.");
  if (Pasta == null) { exit(); }
  if (app.documents.length == 0) { exit(); }
  
  for (i=app.documents.length-1; i>=0; i--) {
      doc = app.documents[i];
      Ref = doc.textFrames.itemByName("Modelo").contents;
      app.activeDocument.save(new File(Pasta.fsName+"/"+Ref+".indd"));
      app.activeDocument.close();
  }
  

  Or, as this (operation on the active document):

  var i, Ref, doc,
      Pasta = Folder.selectDialog("Selecione a pasta de destino dos arquivos.");
  if (Pasta == null) { exit(); }
  if (app.documents.length == 0) { exit(); }
  
  while (app.documents.length) {
      doc = app.documents[0];
      Ref = doc.textFrames.itemByName("Modelo").contents;
      app.activeDocument.save(new File(Pasta.fsName+"/"+Ref+".indd"));
      app.activeDocument.close();
  }
  

  While we are here, please note that the use of "exit()" may be unreliable, especially as scripts get fat. You will probably find it best to use the "return", although it has different semantics.

• Get the content of a document

  Hello world

  I am currently using LiveCycle ES 8.0 and receive a TIFF image in an input document (Document variable).  I need to take that document, get its content (the image itself) and convert it to a string variable that I can store in a database.  Once it is in the database, a Web service call get byte-code image and put it in the shape of the image field.

  Does anyone know of a way to do this in'RE 8.0?  Thanks in advance and if I need to be more specific, please let me know.

  Alex

  Yes. You can do this in a Script to run.

  In fact, I have posted the code to perform a similar operation some time ago.

  Check the following post: http://forums.adobe.com/message/1366379#1366379

  There is to say that it is not possible to pass an object to the jdbc service document, but that's not true. You can do if you use the parameter query option.

  The code you see here was executed within the Script to run.

  However, I still think that you should be able to do all that using the output of the area within the JDBC service operation. But both ways should work.

  Jasmine

• I accidentally did the contents of t he window small and do not know how I did it and how she makes it bigger again that it is very difficult to read now

  I someone how should have used the mouse to click on something, but don't know what

  The control keys to zoom in, pressed with more, less or equal to zero.
  See the font size and zoom - increase the size of the web pages < - clickable link.

  The control key in conjunction with the mouse will also zoom wheel. Post back about how you will.