Columns and rows created are not the same in a browser as in DW

Similar Questions

• CAB and PS6 images are not the same

  Still clinging to SP6 for now.  Recently, I noticed that the images open in ACR PS6 look the same as they did when seen in ACR.  As I open as smart objects, I can return to the cab and determine that the image appears without a doubt different.  PS6 image seems to be more washed out and dish than the same image in ACR.  Here's shears to show my settings:

  ACR

  

  PS6

  

  I use a Dell 2410 calibrated with an i1 Display Pro.  I checked to make sure that all my drivers are up to date.  Only recent changes has been upgraded to Win7 to Win10 and update some brightness mixing of stocks that I use.

  Someone has suggestions that might provide a clue as to what is the problem?

  No, it was just a diagnostic test. Now, we know that the profile is indeed the problem, but must know why the i1 profile is initially either PS or ACR choke.

  The first thing to try is the profile policy. It may be the specification icc version 2 or version 4. Go with v2 if you have this option somewhere - v4 it is still not widely supported. Secondly, and perhaps more likely the issue, is that the profiles can be based on tables, either based on the matrix. Based on a table (usually called LUT) is more accurate, but also more complex and prone to error, more focused on the matrix (sometimes called curves or Gamma in some calibration software).

  I did use i1 Profiler in a while so I don't remember not where you find these options. But I'm fairly certain they are there somewhere, set up a new calibration and seek. The security options are then v2 and profiles matrix-based.

  BTW, the new profile that you will replace Adobe RGB, so you don't need to do anything special to change back.

• Muse and preview mode are not the same

  Hello

  I have a problem with Adobe Muse. The site I am building isn't properly in preview. Below you can see a screenshot of the website in design mode.

  

  Now, with the option "show an overview of the site in the browser" Web site looks like this:

  

  As you can see, the menu is much lower than in the Muse. But when I use the ' Preview in the browser page ' option, the preview is correct:

  

  I tried a lot of things, but I can't do things. Does anyone know how to fix this?

  EDIT: Also, other elements such as text and rectangles are not previewed in the place where they should be. Very frustrating. Someone at - it Adobe, that can help?

  Thank you

  Floris

  Note: the frontpage is a slide show of hero, which explains different background pictures.

  Menu was defined as a 'Footer' element in the Control Strip. Solved.

• product code and product key are not the same...

  i solve this application system 32 product code #. the only thing I found on the bottom of the laptop near that long is the product key and it is not long enough.  where can I find the "product code"?

  What is the 'solve this system"and where did you find (link, please)?

  What is the exact wording of the message you are trying to answer to?

  The term "product code" is often loosely used to mean several different things, so the context and the wording of the exact message are important.

  For your information...

  Usually, the number on the holographic label on the bottom of your laptop is the license key Windows of 25 characters (xxxxx-xxxxx-xxxxx-xxxxx).  Do NOT publish this type of key in this forum or anywhere else online.

  Sometimes you will see a reference to a "product ID" or product code.  It is usually a number of 20 characters according to this format: xxxxx-yyy-zzzzzzz-zzzzz.  This identifies the version of Windows.  On a computer 'brand', the second group of characters is OEM, as in 55274-OEM-zzzzzzz-zzzzzzz.  In this example, the 55274 refers to a generic version of XP Pro OEM.

  Microsoft Office programs use a product code of 32 characters or a Globally Unique ID (GUID) such as
  {WXYYZZZZ-6000-11 D 9 3-8CFE-0050048383C}.

• Separators from decimals/mile are not the same for the number and format of thousands. How can I get even. ?

  I installed the version 11 of Pastel partner and the error message "separators from decimals/thaousand for number and currency formats are not the same" how to get this right?

  Pastel partner support site through and their instructions/FAQ

• Apex 5, call a modal page, set page elements, in values referenced title page elements are not the same (correct) than the item itself

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO., DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can run to display the values of the correct point in the title of the page corresponding to the values of the correct page element (that I have hidden).

  Y at - it something more to do, or it could be a small bug?

  I've created a little demo app on
  https://Apex.Oracle.com/pls/Apex/f?p=75955:2

  WS: AMLWS001

  Demo/demo (developer is)

  Please see the report 1.

  Thank you in advance!

  André

  Hi andremi,

  andreml wrote:

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can make it work to display the values of the correct point in the title of the page corresponding to the values point right page (what I have hidden).

  Y at - it something more to do, or it could be a small bug?

  Page title is rendered before the page elements, that is why is not highlighted in your title.

  I don't think directly, we can use the page as a page element value.

  Creates a copy of yours and made the change it new App id - 45390

  There, I created a static area without a model before your report area and put your article into that.

  then displayed title PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME. for the area of your report.

  Kind regards

  Jitendra

• drop table left-right scale of the value axis are not the same scale

  http://img20.imageshack.us/img20/6264/questionk.PNG
  
  the scale of the axis left and right are not the same.
  
  How to configure?
  
  Thank you very much!

  Hello

  Try this
  Chart, Goto Advanced properties-> check the line sync and the axis of the bar
  This will make the two scale of identical values.

  Thank you
  Vino

• Information VCOPS and the high command are not the same.

  User complains that the machine does not work have enough RAM. VCOP shows that all right. Active comments (KB) - 8 327 788 Maximum of all time. A currently much cheaper. high command shows 10,600,000 KB or higher. Where does get vcops data? And how he can trust?

  And another question. how fast it pulls graphics? Now 10:45 but METRICS TABLE is pulled only at 8.15 (pic)
  

  According to me, there are a lot of related info on these forums, search a bit.

  vc_ops takes the info from the same source, questioning vCenter, who gets to one or several corresponding ESX hosts.

  However, it is the poll every 5 minutes and taking values averaged for that interval.

  Lag displayed points to time synchronization problems in Setup - make sure your vCenter vc ops both are configured correctly for the NTP and time on both is the same.

  Another reason could be if you browser (client machine) in the different time zone which is set up on ops vc

• Remote Desktop works when my office and cell phones are on the same system, but then when I take my laptop home, it does not work!

  I recently updated my computer to Windows 7 Pro.  I also have a laptop running Vista Pro.  I have configured remote desktop on my Windows 7 machine to allow my laptop to access and it works fine when I work the two machines on the same Linksys WRT54 router, here at my small business.  I have configured my router to allow communications to port 3389, but as soon as I take my computer laptop home, I can't access my desktop computer.   I have to configure my home router as well?  It's a new Motorola ADSL router/modem and no place in the configuration to allow port forwarding or port address.  Help!

  Hello

  We are unable to access a computer from another computer if they are in another network by using remote desktop.

  If they are in the same network, use the following links as reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Hope that helps.

• Why are the colours of the designs I create in Illustrator are not the same when I open them to animate?

  It becomes quite boring. I create characters in Illustrator, save in the library, and when I import them into CC animate colors are disabled and that sounds weird. (I used the Gaussian blur and opacity much could this be the problem?)

  Thank you!

  Hello

  To keep the drop shadow, inner glow, glow external and Blur Gaussian HAVE editable effects as Animate filters, Animate matter the objects to which they are applied as an animated clip. If you try to import an object with these attributes as something else that a clip, Animate shows an incompatibility alert and recommends importing the object as a clip.

  To ensure the continuation of this test.

  • In Illustrator. Convert your shape a symbol.
  • Then drag and drop this symbol in the library panel to synchronize it with the CC library.
  • Now go to animate CC and synchronized use symbol from the library CC Panel and you will be able to see the effects.
  • In the import dialog box, please check "Import unused symbols"

  

  Kind regards

  Vivek

• In Premiere Pro and video export colors are not the same, why?

  Hello

  So, I filed a clip in speedgrade and exported from Premiere Pro.

  Strangely when I play the video with vlc it does not show the colors I had in Premiere Pro.

  Now, when I import this clip in AE it seems identical to SpeedGrade and Premiere Pro.

  After have exported them sequelae with and without the color profile converter efffect set to sRGB, as well as with and without the workspace defined as srgb, they all look the same, off the coast of color

  Did I miss a step?

  VLC is up to date?

• CC of InDesign for Mac and PC are not the same?

  I have creative cloud on a Mac and a PC. I can't open Indesign Mac on PC files and it's frustrating. The whole point of getting Adobe CC should be able to work on both platforms. The Mac of Indesign version is showing that 9.2.1 and the PC version is showing that the version 8.0.2. If you're never going to get the PC version, the same, how can I return the Mac down to version 8.0.2 so files will be interchangeable?

  Sounds like you have CC Mac, but only a CS6 version (that you could get subscription) on the PC. Make sure that you install CC on both machines.

• How to join two tables if you transpose the rows, columns and rows in one of the table

  Hi guys,.

  can someone help me please in the write request

  I have two tables

  Agents and Agent phones but in the agent phones table for the id of an agent it displays 4 rows because one of the column there types of different phones (office, mobile, home, fax)

  So instead of display 4 rows, I used max(case...) to convert rows to columns

  now how to reach it with another table

  Requirement:

  Database: 11.2.0.2.0

  create the table AGENT_PHONE

  (

  agent_id NUMBER (20) not null,

  agent_type_code VARCHAR2 (10) not null,

  agent_type_prefix VARCHAR2 (10) not null,

  Phone_Number VARCHAR2 (16) not null,

  phone_type_code VARCHAR2 (10) not null

  )

  CREATE TABLEAGENTS

  (

  agent_id NUMBER (20) not null,

  agent_type_code VARCHAR2 (10) not null,

  agent_type_prefix VARCHAR2 (10) not null,

  NAME VARCHAR2 (40) NOT NULL

  )

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '4805551436', 'CELL');

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '1111111111', 'PHONE');

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '2223334444',' OFF');

  INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

  VALUES (29709, ARE ', 'OFFICE', '5556667788', 'FAX');

  INSERT INTO VALUES AGENTS

  (29709, ARE ', 'OFFICE', 'FLY');

  INSERT INTO VALUES AGENTS

  (1234, ARE ', 'OFFICE', 'MIKE');

  SELECT * FROM AGENT_PHONES

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  PHONE_NUMBER

  PHONE_TYPE_CODE

  ---------------------------------------------------------------------------------------------

  	29709			RE					OFFICE				4805551436		CELL
  	29709			RE					OFFICE				1111111111		PHONE
  	29709			RE					OFFICE				2223334444		OFF
  	29709			RE					OFFICE				5556667788		FAX

  SELECT * AGENTS

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  NAME

  29709

  RE

  OFFICE

  ROB

  1234

  RE

  OFFICE

  MIKE

  This is so the data we have in both table

  Now, I transposed rows to columns in the table of agent phones so I used the following query

  SELECT AP. AGENT_ID,. AGENT_TYPE_CODE,. AGENT_TYPE_PREFIX.

  MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'CELL' THEN AP. PHONE_NUMBER END) AS CELL.

  MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'OFF' THEN AP PHONE_NUMBER END) AS TURNED OFF.

  MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'FAX' THEN AP. PHONE_NUMBER END) LIKE FAX,.

  MAX (CASE WHEN PHONE_TYPE_CODE = 'PHONE'. THEN AP PHONE_NUMBER END) AS PHONE

  AGENT_PHONE AP

  WHERE AP. AGENT_ID = 29709

  GROUP OF AP. AGENT_ID, AP. AGENT_TYPE_CODE, AP. AGENT_TYPE_PREFIX.

  	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	OFF	FAX	PHONE
  1	29709	RE	OFFICE	4805551436	2223334444	5556667788	1111111111

  My question is how this to join the agents table so that my output should be like this...

  I want to display all the results in the table of the Agent, even if they are not in the table of agent phones. As you can see there are other agent id 1234 is also populated

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  NAME

  AGENT_ID

  AGENT_TYPE_CODE

  AGENT_TYPE_PREFIX

  CELL

  PHONE

  OFF

  FAX

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  	29709		RE					OFFICE					ROB			29709		RE					OFFICE				4805551436		1111111111		2223334444		5556667788
  	1234		RE					OFFICE					MIKE

  Currently, I run this query and I get the output as below

  SELECT *.

  AGENTS HAS

  LEFT OUTER JOIN AGENT_PHONE AP

  ON A.AGENT_ID = AP. AGENT_ID

  AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

  AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

  	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	NAME	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	PHONE_NUMBER	PHONE_TYPE_CODE
  1	29709	RE	OFFICE	ROB	29709	RE	OFFICE	4805551436	CELL
  2	29709	RE	OFFICE	ROB	29709	RE	OFFICE	1111111111	PHONE
  3	29709	RE	OFFICE	ROB	29709	RE	OFFICE	2223334444	OFF
  4	29709	RE	OFFICE	ROB	29709	RE	OFFICE	5556667788	FAX
  5	1234	RE	OFFICE	MIKE

  I want id 29709 agent in a line with 1234 agent also id to display

  You can rotate your phone number of agent in columns

  Select *.

  of AGENT_PHONE

  pivot)

  min (PHONE_NUMBER)

  for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

  )

  AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	PHONE	OFF	FAX
  29709	RE	OFFICE	4805551436	1111111111	2223334444	5556667788

  Then you can join to view inline or CTE

  with AGENT_PHONE_PIVOT like)

  Select *.

  of AGENT_PHONE

  pivot)

  min (PHONE_NUMBER)

  for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

  )

  )

  SELECT *.

  AGENTS HAS

  LEFT OUTER JOIN AGENT_PHONE_PIVOT AP

  ON A.AGENT_ID = AP. AGENT_ID

  AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

  AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

  AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	NAME	AGENT_ID	AGENT_TYPE_CODE	AGENT_TYPE_PREFIX	CELL	PHONE	OFF	FAX
  29709	RE	OFFICE	ROB	29709	RE	OFFICE	4805551436	1111111111	2223334444	5556667788
  1234	RE	OFFICE	MIKE	-	-	-	-	-	-	-

  Is that what you're looking for?

• Photosmart Prem C410 all-in-one: our laptop and printer AiO are on the same network, but laptops can 'see' printer

  Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices).  We were able to connect between laptops and printer without problem (printing, scanning, etc.).  A blow, or laptop computer can "see" the printer.  I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network.  I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named.  Help

  On the printer's wireless radio was 'on' but I clicked OK anyway.    Disconnected and reconnected to the network and noted the address IP of the printer had changed.  Laptops are now able to see the printer.  Problem is solved.

• SyncToy 2.1 - synchronized records are not the same

  I use SyncToy 2.1 on a 32 - bit XP system.  I did a "sync" between a local folder and a folder on a mapped drive.  SyncToy reports no errors, but the 'properties' for each of the files are not identical.  One of the folders has 358 files (local folder), and the other has 359 files (the folder on the mapped drive).  There are also differences in the "size" and "Size on disk" in the Properties window

  Good living, XP

  Please go through the below thread that has the explanation of the creation of .dat files when using SyncToy synchronization that could be one of the reasons why you find more number of files.

  How to avoid creating files hidden as SyncToy_*.dat in synchronized folders?
  http://social.Microsoft.com/forums/en-us/SyncToy/thread/8d3256d9-173f-404A-a68f-aca78382be15

  For additional help with SyncToy, please see:

  SyncToy 2.0 - frequently asked Questions
  http://social.Microsoft.com/forums/en-us/SyncToy/thread/5c021aa1-8738-47af-854D-c38d635800ac

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.