COM + issues.

Similar Questions

• First timer having issues with swap HDD

  Hello community!
  Heres so my situation.

  Lenovo 3000 N200 laptop
  Vista basic 32-bit.
  Never had an installation disc. No backup recovery.
  Find the installation ISO online thanks to interrupt support, Microsoft...
  Cannot find Lenovo 3000 N200 recovery disks.
  Bought a used HARD drive (new HARD drive is worth more than the laptop), bought a USB to SATA adapter. Wipe the new HARD drive (except for the recovery partition; do not know how to remove that).
  Reformatted the new HARD drive. Reinserted in laptop.
  Restart windows using DVD ISO.
  Establish the fine with basic Windows Installer.

  Now, here's my problem. I have no Lenovo backup disks.

  Couple strange things happened today.
  -Internet explorer initially blocked almost all the sites I went, saying invalid certificate.
  Now its let me download firefox...
  -Most important yet, I'm trying to download the windows update, but it says "windows cannot check for updates. When I click on the search button for updates, just on the loading screen updates checking.
  -My sticker on my laptop activation key worked for install but when I got on the windows desktop, I had to validate my copy because my key is not all good. Had the phone automated service, blah blah.
  -Laptop computer also cannot keep time properly, but I think it's just a bios battery dead.

  My only guess is that my laptop is private pilots and all the stuff start Lenovo would be installed before sending their laptop of my way. Am I wrong?

  I am so lost in what to do next. Can someone please suggest something? A little info, please!

  What should I do now? It's so hard to find a ride for the reinstallation of windows.

  Sincerely,
  A guy at the top of his head.

  Hello

  You don't tell us which is your time after reset for good.

  If after having set the time/Date and stop and restart your machine the time is to say the year 2007-2009 etc., you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  @@@@@@@@@@@@@@@@@@@@@@@@@

  Lenovo has provided the recovery discs, NOT from Microsoft.

  @@@@@@@@@@@@@@@@@@@@@@@@

  Download you the drivers for your Lenovo computer:

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  @@@@@@@@@@@@@@@@@@@@@@@@

  Use Firefox instead of IE.

  @@@@@@@@@@@@@@@@@@@@@@@@

  Vista without SP2 is no longer supported by Microsoft:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Windows VISTA Premium comes with Windows Defender installed. Mine somehow was deleted and now it won't let me redownload it. Said that I already have.

  When I try to download Windows Defender, I get the following message... You need not install it because Windows Defender is included in Windows VISTA. You can access Windows Defender from the Security section of the Windows Control Panel... From there on, I get the following message...
  : {21EC2020-3AEA-1069-A2DD-08002B30309D}\::{D8559EB9-20C0-410E-BEDA-7ED416AECC2A} Application not found
  I want to REALLY Windows Defender back. How can I do?

  This thread you latch on is almost 2 years.

  Should have started a new one for you.

  To answer your question:

  > Do I need advocate? I use AVG free Edition 2012 and Wise registry cleaner.

  1 AVG is supposed to close Windows Defender. This is because AVG has his own Defender. To have 2 defenders on the same machine will create conflicts.
  Thus, you don't need Windows Defender if you moy.

  2. I HIGHLY recommend that you uninstall the registry cleaner.
  In the hands of the users done computers, registry cleaner could be useful.
  In the hands of novice computer users, it's a time bomb.

  If you have time, read these:

  http://www.edbott.com/weblog/2005/04/why-i-Don ' t-use - Registry cleaners.

  http://www.computerhope.com/issues/ch001077.htm

• Firefox.exe is suddenly gone, so ie11 tried to access the internet to reinstall, but it will not download - now what?

  Hello everyone, newbie here with a weird problem. Looooong time FF user and could care less about IE or Chrome. I recently did a backup of my Acer Aspire One with Win7 Starter user, as I have before, to an external and everything seemed fine except when I tried to launch FF, I received a message that the shortcut can not locate "firefox.exe", I want to remove the shortcut? WTH? So I try the search of the entire computer for him and of course he went. So I try to reinstall FF with an .exe from a previous installation of upgrade and even though she acted as if it might work, but then I got the message "interrupted installation". Bleerg.

  OK, so I opened IE11 here to download a new copy from scratch. IE seems to find the download page of Mozilla very well, but it displays a blank window. I see some elements of the download page, but not the necessary parts, which are visible on IE on my Toshiba (which I did to see what missed me). I tried the same thing with Chrome, just in case IE has, um, ignorant of Mozilla. No, same issue with her.

  So now I run CCleaner Registry Cleaner to see what might appear and this is there are a handful of questions firefox.exe. As I am on my Toshiba to ask for help, I have to manually type in what I show on my Acer:

  Default invalid icon C:\Program Files\Mozilla Firefox\firefox.exe, 1 HKCR\FirefoxHTML\DefaultIcon
  Open with Application issue "C:\Program Files\Mozilla Firefox\firefox.exe" - osint-url '%1' HKCR\FirefoxHTML\shell\open
  Default invalid icon C:\Program Files\Mozilla Firefox\firefox.exe, 1 HKCR\FirefoxURL\DefaultIcon
  Open with Application issue "C:\Program Files\Mozilla Firefox\firefox.exe" - osint-url '%1' HKCR\FirefoxHTML\shell\open
  Default invalid icon C:\Program Files\Mozilla Firefox\firefox.exe, 1 HKCR\ftp\DefaultIcon
  Open with Application issue "C:\Program Files\Mozilla Firefox\firefox.exe" - osint-url '%1' HKCR\ftp\shell\open
  Default invalid icon C:\Program Files\Mozilla Firefox\firefox.exe, 1 HKCR\http\DefaultIcon
  Open with Application issue "C:\Program Files\Mozilla Firefox\firefox.exe" - osint-url '%1' HKCR\http\shell\open
  Default invalid icon C:\Program Files\Mozilla Firefox\firefox.exe, 1 HKCR\https\DefaultIcon
  Open with Application issue "C:\Program Files\Mozilla Firefox\firefox.exe" - osint-url '%1' HKCR\https\shell\open

  ActiveX/COM issue InProcServer32\C:\Program Firefox\AccessibleMarshal.dll

                                                                                                               HKCR\CSLID\{0D68D0-D93D-4D08-A30D-F00DD1F45B24}
  

  Request path problem firefox.exe - C:\Program Files\Mozilla Firefox\firefox.exe

                                                                                                               HKLM\Software\Microsoft\Windows\CurrentVersion\App Paths\firefox.exe
  

  Rule invalid firewall {9A-4A5961-565B-4974-A729-C9D5EE3FFC6E}-C:\Program Files\Mozilla Firefox\firefox.exe

                                                                                                               HKLM\SYSTEM\ControlSet001\services\SharedAccess\Parameters\
                                                                                                               FirewallPolicy\FirewallRules
  

  Rule invalid firewall {53rd-3 192 - etc etc etc... 9EEC} - C:\Program Files\Mozilla Firefox\firefox.exe

                                                                                                               HKLM\SYSTEM\ControlSet001\services\SharedAccess\Parameters\
                                                                                                               FirewallPolicy\FirewallRules
  

  Rule invalid firewall {9A4A5961-etc etc etc... FC6E} - C:\Program Files\Mozilla Firefox\firefox.exe

                                                                                                               HKLM\SYSTEM\ControlSet002\services\SharedAccess\Parameters\
                                                                                                               FirewallPolicy\FirewallRules
  

  Rule invalid firewall {53rd-3 192 - etc etc etc... 9EEC} - C:\Program Files\Mozilla Firefox\firefox.exe

                                                                                                               HKLM\SYSTEM\ControlSet002\services\SharedAccess\Parameters\
                                                                                                               FirewallPolicy\FirewallRules
  

  Just before running CCleaner, I did all Windows Updates pending with the exception of one published this week. I always wait a month. I have fixed all issues selected.

  But what I saw was everything about IE11.

  I uninstalled I could FF but I still have the Service of Maintenance of Mozilla installed 29.0.1, if this is of any help to him who can give me help.

  I briefly considered emailing Setup files to myself so I can open gmail via IE11 to see if I could sneak this way FF, but I think that gmail does not .exe attachments.

  Any help brain big FF and FF community members big brained will be highly appreciated.

  Iggymon, 10/07/15, 545 p CDT

  Uninstall the Firefox on your computer {web link}
  DO NOT REMOVE your profiles.
  After that, restart the computer. Do a registry scan / repair.

  http://www.mattsilverman.com/2009/06/how-to-download-Firefox-without-a-Web-browser.html

  In addition,

  Using another computer, Download Firefox Download Full Version for all languages and systems {web link} on a USB key. After that, plug your system on the go.

• error message on the exchange of mail

  Have a client with an iPhone 6, who have left their jobs recently (6 weeks ago), she has an iPhone 6.  When you send an error message when on the phone it needs to connect to the Exchange.  She wants to be able to access old emails to view on his phone (even if she cannot do something with them), but also does not want to continue getting error pop ups message. What do you suggest to me that she made?

  5 years old, but it should still work. (not me, article)

  http://www.iPhoneLife.com/issues/2011May-June/HowDisableMailAcct

• How to disable the verification of certifcation

  All the sites I visit me to click on a pop up saying safety for site certification expired and I have to reverse it. This also includes your sites. The pop up according to this is from firefox

  Check the Date and time on your system to make sure that they are correct.

  1. If the Date is set incorrectly on your system, it may fall outside the "issued" dates and "expires" certificate.
  2. To view the dates for certificates, you must click on the button to the Site identity (color icon at the left end of the location/URL bar), then click on 'Further information', the Page Info window will open, click on the Security tab, and then click view certificate.
  • Set your Date/time: http://www.computerhope.com/issues/ch000554.htm
  • The site identity button:
    • https://support.Mozilla.com/en-us/KB/site+identity+button
    • http://www.dria.org/WordPress/archives/2008/05/06/635/

  If your system does not take the Date and time after having been turned off and left overnight, the battery on your motherboard may need to be replaced. I replace mine about every 12 to 18 months to avoid such problems. Check with the manufacturer of your system or your operating manual system on how to replace it as well as the battery suitable for use.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Satellite 1410 - NTLDR missing

  My brother gave me his notebook to watch as it will not start. Although initially, it came with XP Home, it has since been upgraded to Professional and has worked well for about 12 months.

  Cannot do a lot with the laptop because it constantly gives me the message NTLDR lack. At took the laptop and in 2.5 HARD drive "caddy to verify content using my home computer and I noticed that the HARD drive was empty. Reformatted to NTFS HARD drive and reinstalled back to laptop.

  Changed BIOS to boot from the CD and tried reinstalling XP Professional but to halfway through the installation, it will fail with a BSOD. Several attempts have been made to install XP and have reformat using NTFS. installation goes as far as creating the \WINDOWS folder but it freezes or gives me a BSOD.

  Not sure if there is a defective HARD drive or RAM or something.

  An advise please

  If possible, try to get the new HARD disk and repeat the installation of the OS. I also recommend you to use a tool to check if the HARD drive has bad sectors. It is really not easy to say what the problem is here, but I assume that there is something wrong with the HARD drive.

  If connected as external device can you copy or delete files to it as usual?

  By the way: check this http://www.computerhope.com/issues/ch000465.htm

• Cannot install W2K on Portege 3480CT

  On eBay, I bought a Portege 3480CT use it as a good machine to create texts out of office. But now I can not install W2K on it.

  It has an external CD drive and does not install: w2k, Linux, W98 (original)... for my favorite W2K, it says: "could not find NTLDR" (w2k) and: "media entfernen - neustart: taste druecken;

  There is no other boot device, no other disc in any location... the disc is my original one, the boot device is passed to 'boot from CD' - the system is used for W2K (there a sticker on the back, which gives me this information).

  and now I'm at the point, I have no idea how to continue.

  Is it possible to make it work again?
  Thanks in advance

  Hello

  If a "NTLDR is missing" message that this indicates that the disk is not bootable.
  Many times this is caused when the computer tries to boot from the CD-ROM or a diskette not bootable.
  In this forum, many users wanted to install the W2K on this laptop.
  First of all, you need a bootable disc.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7187&MessageID=24896

  If you want to boot from the CD of Win98, you must first create a companion disk. See the page of the Toshiba driver for companion disk files.

  Please also see this site. Maybe this helps:
  http://www.computerhope.com/issues/ch000465.htm

• Clear the BIOS for Presario S4000V password

  How to clear a BIOS password unknown for a Presario S4000V?

  Read this.

  http://www.computerhope.com/issues/ch000235.htm

• error Hal.dll corrupt on startup

  Hello.

  I recently had a bad crisis of spywere problems. After Norton anti-spywere tryign, I have the following problem;

  On startup, I get the toshibas start screen, then the error message:

  Windows cannot find the file: hal.dll
  It may be damaged. Please re - install file

  I have the solution to this (on the support site microsoft technical) but (a R 10-101) laptop has no floppy drive, and I have no installation disc, so I can't get a recovery console to fix things.

  Is it possible to get an installation disk without having to buy another copy of windows, or is it possible to get a CDrom as oppose to a boot disk?

  Thank you

  Matt

  Hello

  HAL (Hardware Abstraction Layer) is a layer of operating system programming that allows the operating system to work with a hardware device.
  The missing or not found error message hal.dll, \windows\system32\hal.dll or \winnt\system32\hal.dll may be experienced on a Microsoft Windows 2000 or Microsoft Windows XP system when the boot.ini file is damaged, or when a user attempts to dual boot a computer.

  The best way to solve the problem is to recover the OS because the boot.ini file will be new created.

  But you can also see these sites how to solve the problem.
  http://www.kellys-Korner-XP.com/xp_h.htm
  http://www.computerhope.com/issues/ch000490.htm

  Also on this site you can find a description how to build a clean bootable Windows CD-Rom.
  http://www.nu2.nu/pebuilder/

  Good luck

• HP 15 laptop: startup failure, failure of the DST on 15 HP, with 8.1 windows

  Salvation in the transition from my laptop it displays

  automatic repair, then displays diagnostic PC for hours.

  I tried using F2 and found the failure of DST, and in the management of the firmware, BiOS update and roll back did not indicating that the Signature file was not available.

  How can I get my data back and restore my system? Looking for options and help

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  I'm afraid that it is hardware problem - faulty hard disk drive (HDD). For more details, you can provide me with the full error code that was present there.

  However, since this is the defective HARD drive, you probably will not power recovery files (details to follow).

  Your options:

  (1) If your computer is still under warranty, please contact HP support and inform. They will work with you on how to replace the faulty component.  Contact HP:

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  > > http://support.hp.com/us-en/contact-hp

  (2) If your computer is with the warranty period has expired, you will need to replace the failed HARD drive - buy it yourself. There are various options - sellers you can choose one - you need 2.5-inch SATA HARD drive. You can get it online or retail store of PC.

  You can also consider installing the SSD instead of the HARD disk - it is strongly recommended that SSDS are faster, lighter and more folding. More info on SSD:

  > > http://www.computerhope.com/issues/ch001396.htm

  > > http://www.pcmag.com/article2/0, 2817,2404258,00.asp

  How to replace the failed HARD drive with new HARD or new SSD drive: Please, find information and instructions in the manual for your computer or look at examples of videos YouTube for HP 15. If you do not want this in your own, please make the computer (or ship it) to the authorized Service Center HP where technicians will do that for you. If you don't know where such a centre, check the latter or contact HP to help find one closest to you:

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  > > http://support.hp.com/us-en/document/c00372730

  > > http://www8.hp.com/us/en/store-finder/find.do?bs=SR4 & type = authorized

  (3) last part - once you replace the defective component - you have to reinstall your operating system - Windows or another return. Thus,.

  (3.1) IF your computer is originally shipped with Windows preinstalled from HP (aka OEM of Windows), then you must use the HP - DVD or USB pen drive recovery media you have previously created recovery media or purchased from HP. Some general info > > http://support.hp.com/us-en/document/c00006110

  (3.2) IF your computer is not originally came with Windows pre-installed, but you later installed the operating system on your own, you must use the operating system / Windows installation media and install Windows on your own.

  Please, let me know how it goes and post back if you need assistance. Impatience your feeback/response.

• Music in Spotify, iTunes and Windows Media Player

  Well, I tried to use my programs of music on my computer for about a week and a half now, and that they won't play all my music. Not at all.  I went to support these programs, but they did not really help. I also checked to see if any of them were incompatible with my computer, which iTunes was the only one, and I have uninstalled and reinstalled the version 64-bit for Windows 8 and still nothing.

  I don't know if it's the sound of my computer, which I don't think it is, because it works for everything else except these three programs. And I have no idea why, and frankly, it's getting boring. I also checked my device manager and my sound system and everything is working properly.

  Anyone who can help and give me some answers on this as soon as possible, it would be greatly appreciated!

  Hi JennaHarske

  I understand that you have no noise while trying to play your music programs.

  Here's a url with different fixes for this issue that might be useful.

  https://discussions.Apple.com/message/23448027#23448027

  This url allows you to use Windows Media Player and no sound.

  http://www.computerhope.com/issues/ch000682.htm

  Please provide the following information so that I can better help you.

  Did you upgrade to Win8?

  What is the name of the sound card you are using?

  Click Start, type "Device Manager" and press ENTER.
  
  Expand the section "audio, video and game controllers".
  
  Right click on your sound card, and then select "Properties".
  
  Go to the Details tab.
  
  Select "Hardware ID" from the menu drop down.
  
  This post here.

• The music stops when the screen is closed... Help!

  It would not be a big problem, but I would be so happy if you could help me... When I listen to music on my HP Envy x 2 and the screen closes the music stops and the whon can't start until one begins to use I have once again. As it is now, I can't go any further away from my computer if I want to listen to music. I'm sure that there is some sort of setting I need to change but I can't seem to find it by myself. Thanks for your help! Sandra

  Try it to see if that helps

  1. Open the Control Panel.
  2. Click hardware and sound.
  3. Click on power options or change the energy saving settings.
  4. Click on thechange when the computer sleeps.  in the left side control panel. If you want the computer do not go to standby mode or turn off the screen, select never.

  You can even find in the link

  http://www.computerhope.com/issues/ch000338.htm

• DV7-6c95dx: ADDING 2nd HARD DRIVE WE DV7

  ADDING 2ND HARD DRIVE - IT DOES NOT APPEAR UNDER MY COMPUTER - I DON'T KNOW IF SA FORMATTING OR NOT - CAN GET SOME DIRECTIONS - THANK YOU

  How did you add it? Where's the hardware mounting hard disk? In any State of cause, assuming that you have installed a hard drive was bought, it would be empty and needs be initialized (mounted) and formatted. To find computer or this PC in the right click menu... Choose manage, disk management and you will see a Visual representation of the hard drives. It can automatically prompts you to initialize the disk. Once do you that and format it in ntfs and assign a drive letter and the name of the volume, it will appear in the computer as a lettered drive.

  http://www.computerhope.com/issues/ch000588.htm

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Start

  How to start your computer in safe mood or system bios or menu to start the same? I forget and do not know where to find the information.

  Chris

  Hello

  BIOS is completely different in Mode without failure.

  Safe mode is for the Windows operating system.

  This covers Windows 95 to Windows 10 as you tell us what is your operating system.

  http://www.computerhope.com/issues/chsafe.htm

  BIOS is the settings of the motherboard and varies from the manufacturer of the motherboard manufacturer.

  Usually of F2, DEL, Esc, F9, etc. to the power on to access.

  Ask them or look at the screen on the right when you turn...

  Flashes on a moment.

  See you soon.