Wireless Internet does not work. I get the error: "no operations can be performed on the LAN with its media disconnected in CMD".

Similar Questions

• HP wireless mouse does not work most of the time

  Original title: problem with my wireless mouse

  I have a problem, my wireless mouse does not work most of the time it's repair turning market sometimes, sometimes resembles
  dead, what is the problem I have the latest driver updates everything was ok, but 3 days ago, when I try to use it I see that it does not work
  now I can't use it, I try to restore my computer but locks is not any point of restoration and I plug a different usb port on the port still does not, for more than 2-3 minutes sometimes work! , look at these pictures when my mouse is not working the red light does not work!

  What should I do I have this mouse for 3 months when I buy with my hp touch desktop

  
  

  Thanks so much, I change my batteries and now works seems once again, the batteries will go fast
  can u help me to fix the error, I'm showing you pictured RunDll

• My wireless internet does not work to its maximum.

  Hey, I recently bought a new laptop with Windows 7, and the wireless internet connection seems to work perfectly. But then I found that not quite like the itunes store, Skype and aim. It works only if I wiring. He never seems to be something wrong with just browse the internet. Please help, thanks.

  Hello

  As they work to wire and not wireless the choice more obvious is the WiFi driver and the
  Logon network (security). Of course its possible the WiFi device does not work correctly.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Adobe creative cloud installation does not work. Get the error code 207. All solutions?

  I recently got the cloud creative adobe and so far I'm not impressed with her. The adobe installer will not download the creative application of cloud. It keeps freezing for a minute and gives me this error message.

  And if you tell me that if I am on a managed network and I need to be wired connection to make it work, I am. I use a wired connection and my internet works perfectly. And I also tried disabling my firewall, antivirus software, basically everything what is perhaps perform the server. Still does not work... I tried everything and nothing works.

  Got it to work, it seems that it is bitdefender, my anti virus program sends me questions. However, I disable the antivirus program trying to get the installer to work and I still get the error. So I just straight up to uninstall bitdefender on my pc and it seems to work perfectly. Hope this helps anyone who has the same problem I did.

  See you soon!

• Internet does not work most of the time

  I had a problem with my internet connection for about a month now.  I spoke with our internet service provider, and they don't know what the problem is.  Sometimes I was able to connect, but when I do it, the internet is very slow.  Someone at - it ideas?

  Win XP Home Edition

  With the help of Google Chrome (IE I tried, does not work or the other)

  I suggest that you try here and say what your result and how it compares to your expectations.

  http://www.myaccount.Charter.com/customers/support.aspx?SupportArticleID=2098

  Hope this helps, Gerry Cornell

• How to remove the part of an object grouped several using a shape (Pathfinder does not work, cannot get the knockout groups to work)? Kind of like the opposite of a clipping mask.

  I want to remove the portion of these legs inside of this graph, because a white circle solid at the Center intensifies the effect of the spiral.

  Background, the spiral is a mixture of the people flying around in a circle. The circle is then copied and turned several times. I have not developed the appearance again.

  There must be an easy way to do it, but I can't use the Pathfinders, the opacity mask, knockout groups, and make simple layers does not work. I just want to axe the legs of these easy people!

  

  

  

  This is not correct

  

  I do several models and want to find a way to make it easy and fast!

  

  Thanks to you all!

  Emmanuel,

  If I (put) correctly, you should be able to get the opacity mask to work as follows:

  Select (only) the White path and the mixture and then in the transparency palette flyout on create with unchecked Clip opacity mask and mask invert checked.

  Who must hide the inner part of the mixture corresponding to the white circle and let the front remains visible oin the background (circle and all that.)

  .

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• My Vista pc does not work properly, getting the error 1097

  It contains errors of 1097

  and it does not correctly cause of which my system is facing problems.
  How can I reinstall the software?
  can I format the system?
  my pc name is Zenith and I got windows vista startup
  Please tell me the solution as soon as possible

  Hi Vikykhandare,

  1. when exactly do you get these errors?

  2 - does this happen when you try to run a specific program or with all programs?

  3. what issues you are facing?

  Method 1:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  You can check out the following link and try the suggested steps to optimize PC for better performance and check what is happening.

  Optimize your computer for peak performance

  Optimize Windows Vista for better performance

  Hope this information is useful.

• USB and a targus wireless mouse does not work, even after the help of MS tech.support

  Microsoft Tech. checked my pc online to see if I could connect my Targus mouse and its usb device. He said that I can. I still can't activate it

  Hi DebraKennedyUP,

  1. did you last changes made on your computer before the show?

  2. What is the operating system installed on your computer?

  3 - is the same mouse work on different computers?

  Perform the following troubleshooting steps:

  Method: 1

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method: 2

  Run the troubleshooter of material to find exactly the problem.

  Open the hardware and devices Troubleshooter

  Method: 3

  Also, proceed as shown in the following link.

  Hardware devices do not work or are not detected in Windows

  Method: 4

  I suggest you to update the drivers and check how it works.

  Updated a hardware driver that is not working properly

• Internet does not work on Windows 7, no drivers for the Wifi and LAN

  Original title: Windows 7

  I used to have Windows 8 on my laptop. Well, so I've updated for Windows 10. Config my laptop wasn't as good, so it's slow. Recently, I installed Windows 7 (as it is known for the performance) somehow, the internet does not work. Missing the drivers for the wifi and lan. What should I do?

  Well, as my readers usb and touch screen no longer work.

  You have installed Windows 7 on a machine that is preinstalled with Windows 8, without checking first if the computer manufacturer supported and provided Windows 7 drivers for it.

  If does not support or provide Windows 7 drivers for this, you should never have installed Windows 7 on this computer Windows 8 and we cannot help you.

  Reinstall Windows 8.

• "Wireless radio does not work" when the Diagnostic tool is run

  Recently, I unplugged my C309a HP Photosmart Premium and he moved to a new Tablet next to my main computer.  Wireless network card works perfectly before the move, and now it does not detect networks to connect to.  I have run the wireless network test report and it says "Wireless Radio does not work.  Contact HP support. "I can do here to help solve this problem, or I have to pay for repairs somewhere?  I want to believe that this HP product can support more than a simple passage of one shelf to another...

  Any suggestions would be greatly appreciated!

  * Note * I know my network works correctly (because I'm connected to it now...).  My computer detects my network as well as several others in the neighborhood.

  Is the printer still under warranty?  If yes you can not he repaired, but it can cost almost what a new printer costs.  Here is how to contact HP.

  Your printer must be able to work with USB and it should also be able to be connected to your router with an Ethernet cable.

• MrFixIt of E0434F4D program for the error code does not work because of this error

  When you install the update for Microsoft .NET Framework 1.1 SP1, I get the error E0434F4D code.  MrFixIt program does not work because of this error. I can't run applications because of this corruption. Including most Microsoft applications, as soon as I try to run an application, I get a window saying 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "I recently got this used pc and I looked at the history of the update, and it was apparently a failed update for the past two years. This will also prevent me to update other software and drivers on my computer and prevents even me to install new drivers.

  Hello

  1 have had any changes made on the computer before the show?

  2. when exactly you get the error message?

  3. what happens when you try to run Microsoft Fix it?

  4. What is the full and exact error message?

  I suggest you check the thread with a similar problem, and a fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/error-code-e0434f4d-what-to-do-to-fix-this/10ac1da2-25AC-495a-a8a5-6dbe2809f7a0

  If you are having problems with Microsoft Fix it tools, I suggest you to send your request in the Microsoft Fix it forums for assistance.

  Microsoft Fix it Forum

  http://social.Microsoft.com/forums/en/fixitcenter/threads

• Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

  Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

  I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

  Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

  I hope this helps.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.