Combine my RAM with RAM of the same brand but lower MHz or another brand with exact same specificities?

Similar Questions

• RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

  I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
  All the 4 sticks of RAM are the same brand and compatible with my motherboard.
  I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
  I got a few BSOD - 0 x 00000109 - errors that I work.
  I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
  These memtest errors concern the bars invisible RAM or the work those?
  Any ideas as to what should I do next?
  See you soon!
  Data sheet:
  Windows 7 Home Premium 64-bit
  Intel Core i7-3820 @ 3.6 GHz
  ASUS P9X79
  GeForce GTX 650
  Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

  Thanks Joel,

  I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
  I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
  I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
  So that's one mystery solved at least.
  I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
  Thanks again.
  Nick

• Windows Xp not connecting to another computer on the Working Group, but individually can connect another computer

  Windows Xp node fails to connect to another computer on the Working Group, but individually can connect another computer.

  I checked the file & sharing options of printer being checked on the general tab.

  Hello

  1. did you of recent changes on your system prior to this problem?
  2. where you able to connect to other computers through the front working group?
  3. do you get an error message?

  I suggest you try the procedure described in the below mentioned link and check if it helps.

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP:
  http://support.Microsoft.com/kb/318030

  Hope this information is useful.

• Possible to combine VOIP and teleconference call in the same session?

  Is it possible to use VOIP AND telephone conference together in the same Adobe Connect session? If so, how?

  Hello

  This is possible by using the UV (Unified Voice) function that supports Acrobat Connect Pro. Please contact your reseller to learn more about this feature.

  Thank you

  Sameer Puri

• When I combine a PDF pages are not the same size, what should I do?

  For the most part it's jpeg photos.
  TNX

  To print on a new PDF. You could select the page of standard size (portrait or landscape) and reduce the size to fit (in which case all pages are larger). This approach would leave small smaller photos. You can also select fit to page so that all have the same size.

  There may be a preflight script that could do that, but I remember a hand.

• 8570W: [8570w update] Run 1.5V ram and 1.35v ram at the same time (dual channel), is dangerous?

  I have a 8570W with ordiginal of ram 4 GB 1.5V. I've just updated my 8570w with more than 4 GB (4 GB 1.35v micron technology). Now laptop may still works fine, but I wonder to work for a long time (to come): is there a risk to my systerm when I use 2 cylinders with 2 different voltage like that?

  Thank you for your answear

  These photos show my systerm

  There should not be any risk.

• RAM is the only way but is dual channel configuration.

  I have HP Pavilion a6000n, which has these capabilities of memory/features:

  • Dual channel memory architecture
  • Four connectors DIMM DDR2 240-pin
  • Supports the PC-6400 (800 MHz) DDR2 DIMM PC-4200 (533 MHz) and PC2-5300 (667 MHz)
  • Memory non - ECC, unbuffered
  • supports DIMM DDR2 2 GB modules
  • Supports up to 8 GB on 64-bit PCs
  • Supports up to 4 GB * on 32-bit PCs

  I recently upgraded from 2x512mb (1 GB) DDR2 PC-4200 to 2x2gb (4GB) DDR2 PC-6400 installed configuration dual channel (connectors DIMM 1 & 3). The BIOS and my CPU - Z application illustrates that the memory works as single Channel.

  This would indicate faulty RAM? Limitation of the motherboard? Any ideas? All inputs/advice is appreciated

  Thank you.

  Thank you very much! Problem solved.

• I pay for the creative cloud but adobe stock is another charge?

  Although I pay for creative cloud... stock images will be another correct load?

  Hi Michael,

  Yes, it's true.

  Check this box for more details. Adobe Stock price and membership plan. Adobe Stock

  Bravo!

  ~ David

• to install the 4 gigs, but Windows 7 seems only works on 2 GB RAM?

  I recently installed a new hard drive 2 TB with a new operating system windows 7.  My pc has 2 GB for a long time and that I was going to go to 4 GB, but when I try windows 7 does not start. It works very well with my old ram, but hate the new ram, although it will run one of the single stick 2 gig. Is there a way to get win7 to run on 4 gigs or am I S.O.L.?

  -Just to clarify - you said - "if it runs one of the only stick 2 gig.
  You initially only a strip of 2 GB of RAM?
  Is the new stick exactly the same as the original key
  -Motherboard and RAM mfg will ensure never compatibility of one (or two) of stick of extra RAM to another brand, or model. Often the RAM works, but there are various reasons to reduce performance, and in certain cases matched miss RAM will not work.
  For this reason they mfg RAM in pairs, or kits.
  The best chance of success and maximum performance are if the RAM has the same speed, latency, and voltage
  For example - DDR3 1600 MHz @ 9,9,9,24 - 1, 5V.

  If you have had the machine for a long time try cleaning the RAM slots with a small brush.
  They may have dust is blocking some of the contacts. I had it just happens this
  week when adding two other glue to an old machine.

  Also check that you are using the slot for the stick of extra RAM if you had one before.
  Most motherboards have different colorful locations in order to identify 'pairs '. Some motherboards are configured
  If you ignore a slot when using two sticks, while some are set up to use two sticks, side by side.

  .

• is it possible to combine ethernet and wifi connections to use both at the same time

  I want to fill the two connections without using third-party software can do this combine is wifi and ethernet, all use both faster speeds for

  Ethernet is the fastest connection to use your modem/router and it will not combine or run them both at the same time.

  To test your speed, try > http://www.speedtest.net/

  or > https://www.speakeasy.net/speedtest/http://www.speedtest.net/

  If you are unhappy with the speed of your ISP, you need to communicate with them or another ISP.

• Import multiple Word documents of several pages with the same master page?

  Hi, I should start by saying that I have no experience with script.  However, I wonder if there is a simple script for the following problem:

  I created a master page with three linked text boxes. Right now, I use Cmd + D to select a file in word, and then Shift + click in the first box to place the text on the page. But I have 125 pages that are exactly the same, just different layout Word files to import. I could repeat this process 125 times, but I wonder if there is a way to tell InDesign to create 125 pages using the Master Page X and a for each import file?

  I use InDesign CS5 v 7.0.4 on Mac OS x Snow Leopard 10.6.7 v

  I thank in advance for any help you can offer,

  NW

  I'm sorry. The problem is that InDesign treats the two pages of the spread of master together, I guess you have to make a few hoop jump. Try this, then:

  var
      d=app.activeDocument,
      p=d.pages,
      i, frames, masterPage, page;
  
  for (i=0; i
  We have to check the whether the page is a left-hand page, and if it is, use the first page (0) of the master spread, otherwiseuse the right page.
  
  		   

• parallel and sequential in the same sequence

  Hello

  To expedite the duration of the test, I would like to make some of my steps in parallel with others.

  However, some of the previous steps and the following must be executed sequentially.

  How to combine these 2 behaviors run inside the same sequence?

  Put the digital multimeter read in a sous-suite. Then call three times, with the option to purchase New Thread subsequence. You can use the three steps in sequence call, or to execute a loop on a single call.

  After the call, use a step of waiting with the wait for the option of Thread for each call. You can use the three steps of waiting to match your three calls, or if your calls were in a loop, you can use an expectation not in a loop.

• check point and polygon in the same table

  Hello
  
  Can I store two different types of geometry as the Point and polygon in a table with one column of the SDO-Gemetry? I read somewhere that we can only store one type either points, polygon or line in one table with only on column geom, is that correct? If so, what would be the solution if the data is of type points and polygons? Should I create different table?
  
  Appreciate any response or any type of recommendation.
  
  FYI - I use oracle 10g with oracle spatial extension.
  
  Best regards
  
  Marwa

  M

  The fact that you combine several types of geometry in the same column has obvisouly some impact in the way that you investigate this type of column.

  you could include a clause, for example, to filter on the type of geometry: where a.loc.gtype = 2001 (point gtype).

  you could also, as you ask specifically points, through the access of the x and the coordinate of the point y (type) with a.loc.sdo_point.x =... and even for y.

  but I think in your case, once you have built your spatial index, it may be better (in terms of performance) to fetch the spatial operator that uses the spatial index.

  so the where clause would be: where sdo_relate (a.loc, (2001,8307,SDO_POINT_TYPE (107.53,32.53,null), null, null), sdo_geometry "mask = EQUALITY '") = 'TRUE '.

  Luke

• Repeat the same interview at the OPA 12 screens

  Hi guys,.

  I have a requirement that repeats to flow. A workflow consists of 3 or 4 screens that collects information from a single entity at the end of these flows, we provide a Boolean attribute to check if the user still wants to repeat the process. If he select Yes we need to repeat the same process until it select No.

  I know that we can add instances of entity on the first page. but y at - it another way to repeat the same process.

  Thank you

  As far as I know, I don't think that entities can operate in this way. We must create set of instances on a single screen on the first page and create some remaining data screens in subsequent reviews by referencing the value of the attribute in order to recognize that information is linked to the instance in subsequent reviews.

  Thank you

  Vivek

• Mac Air 1.3 Ghz i5, 4 GB ram end of 2013 everyone upgraded to El Capitan with the same configuration?

  worried about the going 10.10.5 Yosemite to El Capitan. Especially with only 4 GB of ram. Have 256 GB SSD HARD drive

  would appreciate an answer from people already have the upgrade.problems with the same configuration? slower?

  FWIW, the El Capitan applications are no different from Yosemite. In fact, it is easier on resources in some areas. The main thing you need to worry is to make sure the software and equipment to use is compatible. Make sure you have a good backup in case you change your mind and want to downgrade.