Combining images

Similar Questions

• Photoshop - combine images channel purple and green in a fused image?

  Hello

  My molecular biology laboratory trying to image fusion from a Confocal Microscope batch.  The microscope uses lasers to view different parts of a sample in a number of channels.

  For each sample, there are two corresponding channels at each level.  We try all these corresponding images merge into one combined image.  The image fusion process is simple; However, we must do this 150 - 250 times for each sample and we have several samples.

  I found an old post on the forum (Photoshop - combine images red and green layer in a fused image? ) which causes the writing a script for exactly this.  However, the script does not work for me.  I'm new to using scripts in photoshop and would appreciate greatly all possible assistance.

  Here is the code I tried to run.

  // make a reference to the savedFolder  
  var savedFolder = new Folder('~/desktop/Merged Image');  
  // create the folder if it doesn't exists  
  if(!savedFolder.exists) savedFolder.create();  
  // get the source folder from the user and store in variable  
  var sourceFolder = Folder.selectDialog();  
  // make sure user selected a folder  
  if(sourceFolder != null){  
      // get an array of red images and store in variable  
      var sourceFiles = sourceFolder.getFiles(/_ch00\.tif$/i);  
      // make a loop to process all found sets.  
      for(var i = 0; i < sourceFiles.length;i++){  
          var redName = sourceFiles[i].name;  
          var greenName = redName.replace('_ch00','_ch01');  
          var redImage = open(sourceFiles[i]);// open the red file and store reference to document  
          var greenImage = open(new File(sourceFolder+'/'+greenName));// open the green file and store reference that document  
          // now apply redImge using lighten mode  
          applyChannel( charIDToTypeID( "RGB " ) , redImage.name );  
          // save the merged document  
          SaveAsTIFF(savedFolder+'/'+redName.replace(/_ch00\.tif$/i,'_merged.tif'),true);  
          // close the open documents for next loop  
          redImage.close(SaveOptions.DONOTSAVECHANGES);  
          greenImage.close(SaveOptions.DONOTSAVECHANGES);  
          }  
  }  
  function applyChannel( channelID, documentName ){  
      // charIDToTypeID( "RGB " )  
      // charIDToTypeID( "Rd  " )  
      // charIDToTypeID( "Grn " )  
      // charIDToTypeID( "Bl  " )  
      var desc = new ActionDescriptor();  
      var channelsDesc = new ActionDescriptor();  
      var ref = new ActionReference();  
      ref.putEnumerated( charIDToTypeID( "Chnl" ), charIDToTypeID( "Chnl" ), channelID);  
      ref.putProperty( charIDToTypeID( "Lyr " ), charIDToTypeID( "Bckg" ) );  
      ref.putName( charIDToTypeID( "Dcmn" ), documentName );  
      channelsDesc.putReference( charIDToTypeID( "T   " ), ref );  
      channelsDesc.putEnumerated( charIDToTypeID( "Clcl" ), charIDToTypeID( "Clcn" ), charIDToTypeID( "Lghn" ) );  
      channelsDesc.putBoolean( charIDToTypeID( "PrsT" ), true );  
      desc.putObject( charIDToTypeID( "With" ), charIDToTypeID( "Clcl" ), channelsDesc );  
      executeAction( charIDToTypeID( "AppI" ), desc, DialogModes.NO );  
  };  
  function SaveAsTIFF( inFileName, inLZW ) {  
      var tiffSaveOptions = new TiffSaveOptions();  
      if ( inLZW ) {  
          tiffSaveOptions.imageCompression = TIFFEncoding.TIFFLZW;  
      } else {  
          tiffSaveOptions.imageCompression = TIFFEncoding.NONE;  
      }   
      app.activeDocument.saveAs( File( inFileName ), tiffSaveOptions );  
  };  
  

  Basically, everything I changed code original was the '_r' to '_ch00' and '_g' to '_ch01 '.  Thinking that the only difference between the original message and mine was the file name.  I executed the script in Adobe ExtendScript ToolKit.  The code is not able to go beyond the line 15 without the error "opening is not a function".

  I tried to save the script and try it out in photoshop in any case and I get the error code "error 8800: general Photoshop error occurred." Maybe this feature is not available in this version of photoshop.  -The 'Apply Image' command is not currently available. Line 41-> executeAction (CharIDToTypeID ('Appl'), desc, DialogModes.NO); »

  I honestly don't know enough about coding to know even where to begin to fix this problem.  Any direction would be much appreciated!

  / Steven

  I use photoshop CS5.  I think I found the problem, however.  The files needed to be converted to RGB index for the script is running.  Seems to work fine now.  Thanks for the reply!

• Combining images into two separate postscript files into a single file with a single line

  I have two postscript files, each representing a pure black and white, images identically companies (generated by Eagle PCB, is not that it's all that relevant), as it is attached.   I would like to combine the two files into a single file where are the two images side fits on one line so I can print them together.   What is the easiest to do this route?

  Example files:

  https://www.dropbox.com/s/rrcw4t4bk0x5x6u/file1.PS?DL=0

  https://www.dropbox.com/s/21de4f9c35qa3w3/File2.PS?DL=0

  In fact, I could solve the problem with a little reverse engineering of the Postscript and a bash script.

  The files two postscript define a bunch of common functions and some points of reference and call these functions to draw geometries.  I just extend the width of a drawing by 2 X, remove the "grestore" from the bottom, translate the origin back to the middle and shoot another image, followed by a "grestore.

  Resulting file:

  https://www.dropbox.com/s/p378o2vtppl6v1y/combined.PS?DL=0

• Combining images into one. (Twist of plot: 2000 images.)

  So I thought if anyone knows how to do this, it would be you guys!

  I have 2000 images.

  They are 1 pixel wide and 1000 pixels high.

  What I want to do is to combine all these into a new

  2000 x 1000 pixel image. Everything I've tried so far

  did my computer crashes or I ran out of space scratchdisk.

  Any ideas? You save me.

  Thank you.

  If your computer breaks down, which I'm sure it would be, not so much because the size of files, but the number of layers. Try to do it in smaller batches. Have you tried to load saying 500 of these layers in a doc of PS to help load files into the script of layers. Then expand your document to the exact size of all the combined pixel widths. Move the last if the layers were numbered correctly, the first and the last layer should be layers of the end. move the layer whatever that is supposed to go on the right side of this side. Then select all layers and with the move selected tool, distribution centres. I think this might do the trick for you.

• combining image submit with text field

  How would easily combine the image of research with the (or in the) text field?

  

  You can see a customized below search box.

  View source in the browser to see the code of the entire form.

  http://ALT-Web.com/demos/search.html

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• Combine Images

  Is it possible in fireworks CS3 to combine two images into one with a simple transparent fade. In other words, have the two images to the right and to the left. Since the middle of the picture, melt it in the other image as a gradient? If someone could point me in the right direction that would be great.

  You could pen each image by clicking on it, a mark inside the bitmap drawing then go to select > feather. Another way that I prefer is to select the image and go to the commands > Creative > Fade Image.

  Anyway, once you have the two images faded / feathered in different directions just lay them on top of the other and presto!

• Combine two jpg images

  I try to combine two JPGs as two PDF files into one.

  I have a PDF file with more pages and just add a page at the end. It seems to work. And when I save me it also includes the addition of the page.

  However, I'm now trying to merge two files jpg in the same style. This doesn't seem to work. Why?

  Thank you

  With the help of Pages ' 09 v4.3, you can combine two images, select both, group them, copy to the Clipboard and select new in the Clipboard in preview. They are now in PDF in preview, where you can save, export to other formats or copy/paste in Pages in PDF format.

  I reference the older Pages, because in the Pages v5.6.2, your travel Pages from the Clipboard to the product overview a file of Graphics PNG 72 dpi - not PDF and not the two combined images JPG.

  If you don't have a Pages ' 09 v4.3, you should combine your images in a graphics program dedicated (for example GIMP (free), Photoshop, designer of affinity, etc.).

  You cannot combine images in preview, as you can the PDF. The combination of the image seems to work until you save and view this content, to see that it did not work after all.

• The combination of images in PSE12

  I have recently switched from PSE6 to PSE12.  Everything was great, except that I have a question.  I tried to look for help, but I'm not really sure of what search words to use.

  I do a lot of digital scrapbooking and thus combine images quite often.  In PSE6, all images have been opened in both the work area and I could catch, resize them, move them and drag them from one window to the other.

  In PSE12, I can't understand how to do this.  If I go to Windows == > Images == > tile, it will be their tiling but I don't have the freedom to move.  It seems there are two other options to 'Float in the window' but which is grayed out and I can't figure out how to use this option.

  Thank you very much.

  In Edit > Preferences > General, is the ability to allow floating documents in full edit mode checked?

• Combine CSS and Images files

  Hey all,.

  My pages with DW CS5 get to be large enough (bytes).  Is there a way to put all my css stylesheet information in a file?  I have several things CSS (menus, information on the page, google tricks and widgets and sprys) on pages causing things to download on every page (even if the page does not actually use some of the elements).

  In the same vein, is it possible to combine images in order to reduce the bandwidth, that the user's browser needs to load them?  My images are not large (usually 3 to 7 bytes only), but there are enough, only it them to slow down things.

  To see what I'm talking about please see www.aloe-vera.org

  Thank you, David

  Certainly, you can merge your CSS into your external style sheet, related to improve the management of your CSS.

  However, your script files contribute to the lion share of the download file size.

  Click to enlarge:

  

• Scaling a 2D image without using the zoom factor

  I currently have a large 2D image and several smaller 2D iamges that overlap the magnified image.  The big picture is created with the draw in labview, while smal iamges are created with a png image.  Magnification on the enlarged image is 7, while 2D of png images must be scale par.21 to fit in the big picture properally.  As 2D images are stacked, while the rear image updates sometimes "flickers" through the small images.  To resolve this problem, I can combine images, but it does not work because different zoom factors.  Is there a way to reduce an image without using a zoom factor?  Is it possible that I have to scale the bitmap programmatically?

  Thank you for your time

  Mitchell Wörner

  Your postal code for you, but in the past when I needed to resize an image, resize it GDI built into .NET always worked very well for me.

  http://forums.NI.com/T5/LabVIEW/NET-image-resize-how-to-convert-to-format-LabVIEW-can-use/m-p/219902...

  I have used this in my Show Open VI quick drop

  https://decibel.NI.com/content/docs/doc-31302

• How to combine libraries of photos with pictures in Windows Media Center

  I want to know how to combine images with windows media center libraries pictures how it's done?

  Original title: search search index indexing re-indexing re-index research research research service troubleshooting troubleshooting

  Hello

  What operating system do you use?

  Please provide information more precise about what you are exactly doing.

  Refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:
  http://support.Microsoft.com/kb/555375

  You can also view the Sub articles that might help you.
  Windows Media Center
  http://www.Microsoft.com/Windows/Windows-Media-Center/get-started/media-library.aspx
  Add media files to Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/add-media-files-to-Windows-Media-Center

• I try to combine a picture of my sister with a picture of a poem next to her. How to combine the two into a single photo?

  Paint or Windows Photo Gallery

  I try to combine a picture of my sister with a picture of a poem beside it, how to combine the two into a single photo?

  If you have the poem recorded in an image format,
  the following freeware can create a side by side
  Panorama.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download IrfanView
  http://MajorGeeks.com/IrfanView_d4253.html
  (filename: iview433_setup.exe)
  (uncheck if you don't want Google Chrome)

  Download plug-ins too...

  IrfanView plugins
  http://MajorGeeks.com/IrfanView_PlugIns_d4908.html
  (filename: irfanview_plugins_433_setup.exe)

  When the program is installed... read more...

  Open IrfanView and go... Image / create the Image of the Panorama...
  (this will open the screen to "Create a panorama image")

  On the screen to "Create a panorama image"... left click on the add images"" button.
  (Displays the 'Open' screen. Now, drill down to the
  the folder that contains your saved Photos of veterinarians.

  Now... click left (highlighted), the two images, you want to join.
  (you can select more than one if you hold down your Ctrl key)
   
  The two images highlight... left click on the button 'open '.
  (Or... you can add the images one at a time... which is always easier)

  Now, go back to the screen "Create the panorama image.
  and the file names of the selected pictures need to be in the
  Field "Input Images.

  Now with the names of two files in 'Images of entry' field...
  You can left click on the button 'create Image '.

  (the positions left and right of these images can be swapped in)
  selection of a file name and using the "mount image" / "Move."
  Images down"buttons...)

  Now you should see a display of the combined image.
  Reach... File / save as...

  Choose a backup location / enter a file name / choose a format...
  On the left, click on the button "Save..."

• How to merge two images to become a

  How can I take two separate images and merge them into just a photo?

  The free software IrfanView can do the job you need.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download IrfanView
  http://MajorGeeks.com/IrfanView_d4253.html
  (filename: iview432_setup.exe)
  (uncheck if you don't want Google Chrome)

  Download plug-ins too...

  IrfanView plugins
  http://MajorGeeks.com/IrfanView_PlugIns_d4908.html
  (filename: irfanview_plugins_432_setup.exe)

  When IrfanView is downloaded and installed, see the following
  instructions for joining your photos.

  Open IrfanView and go... Image / create the Image of the Panorama...
  (this will open the screen to "Create a panorama image")

  On the screen to "Create a panorama image"... left click on the add images"" button.
  (Displays the 'Open' screen. Now, drill down to the
  the folder that contains your saved Photos of veterinarians.

  Now... click left (highlighted), the two images, you want to join.
  (you can select more than one if you hold down your Ctrl key)
   
  The two images highlight... left click on the button 'open '.
  (Or... you can add the images one at a time... which is always easier)

  Now, go back to the screen "Create the panorama image.
  and the file names of the selected pictures need to be in the
  Field "Input Images.

  Now with the names of two files in 'Images of entry' field...
  You can left click on the button 'create Image '.

  (the positions left and right of these images can be swapped in)
  selection of a file name and using the "mount image" / "Move."
  Images down"buttons...)

  Now you should see a display of the combined image.
  Reach... File / save as...

  Choose a backup location / enter a file name / choose a format...
  On the left, click on the button "Save..."

• I would like to combine two picture files in a single window of paint

  I would like to open a photo file in the 'paint' and then open another file of the photo next to it in the same window of paint, so that I can change the two together. Thank you.

  If you have Al join the edge to edge pictures...
  the free software IrfanView can do this very easily.
  (if you think of something more complex...
  Please describe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  IrfanView and IrfanView plugins
  http://www.download.HR/download-IrfanView.html
  (scroll down a bit for the download links)
  (Download plugins too)

  Open IrfanView and go... Image / create the Image of the Panorama...
  (this will open the screen to "Create a panorama image")

  On the screen to "Create a panorama image"... left click on the add images"" button.
  (Displays the 'Open' screen. Now, drill down to the
  the folder that contains your saved Photos of veterinarians.

  Now... click left (highlighted), the two images, you want to join.
  (you can select more than one if you hold down your Ctrl key)
   
  The two images highlight... left click on the button 'open '.
  (Or... you can add the images one at a time... which is always easier)

  Now, go back to the screen "Create the panorama image.
  and the file names of the selected pictures need to be in the
  Field "Input Images.

  Now with the names of two files in 'Images of entry' field...
  You can left click on the button 'create Image '.

  (the positions left and right of these images can be swapped in)
  selection of a file name and using the "mount image" / "Move."
  Images down"buttons...)

  Now you should see a display of the combined image.
  Reach... File / save as...

  Choose a backup location / enter a file name / choose a format...
  On the left, click on the button "Save..."

• How can I put two images in an image in movie maker?

  How can I put two images in a frame in moviemaker. I know they must be smaller then, how I can do it too?

  How can I put two images in a frame in moviemaker. I know they must be smaller then, how I can do it too?

  =========================================
  Try to join the pictures before you import them into Movie Maker.

  The free software IrfanView can attach photos edge to edge vertically or
  horizontally.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  IrfanView
  http://www.TechSpot.com/downloads/299-IrfanView.html
  (the name of the file is: iview427_setup.exe)

  IrfanView plugins
  http://www.TechSpot.com/downloads/472-IrfanView-plugins.html
  (the name of the file is: irfanview_plugins_427_setup.exe)

  Once you have downloaded IrfanView and
  installed... Open the program and go to...

  ... Image / create the Image of the Panorama...

  Make your choice and click on the button create an Image.

  When you see the combined images displayed
  in the display... go to... File / save as...

  Choose a location...

  Choose a format...

  Give the file a new name...

  Click on... Save...

  Also, the following links may offer a few ideas:

  ShaderTFX
  http://www.rehanfx.org/shader.htm

  Pixelan
  http://Pixelan.com/mm/intro.htm

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.