Command center of Area-51 & Windows 8

Similar Questions

• Manually remove files and folders from the registry and everywhere else Windows 7 Ultimate command center. Area 51 ALX.

  Hello, the application on my computer command center became corrupted several times in the past. Tried several times to reinstall from the site Web of Dell but as usual, in just a few days becomes a ball dead dysfunctional and even conflicts with other applications and makes my computer run slowly. Having had enough. I decide to uninstall it and then reinstall it if I can get it to work just long enough for the lighting and the case vents program I like exploitation, programming for always the firmware on the map of IO control. and then uninstall the application. never to give him another chance. Now that most of it has gone through adding and removing programs, he left behind him i ' ts corrupted of unnecessary files in other areas, continues to wreak havoc on my computer. Please give me a list of instructions telling me where to go to find these folders, files and delete them. Thank you very much!

  Hello

  Follow the steps in the article below:

  SLN303405 - how to remove and reinstall the Alienware command center

  Let me know if you need anything else!

• Questions from Area 51 alx command center

  Hello everyone, I know this is a problem about 4 years ago but I would like to remedy once and for all.

  A bit of history.  I had the Board replaced 3 or 4 times master IO.  After a last I kinda gave up on ever control work center.  Here is where I am: I run dell diagnostics and what is the MIO Board spent (to be kept for the door of the optical drive being faulty).  Events cycle, the lights work, fans run to the top.  Then I uninstalled command center, power off, unplugged for 30 sec ~, held the power button for 30 sec ~, rebooted, reinstalled and still the same issue.  He doesn't get to the tower.  I don't have any unknown devices listed under USB.  I have windows 7, A11, command center Version downloaded BIOS version: 2.8.9.0, A02-00 page of dell drivers and downloads.  It seems that I have microsoft .NET framework version 4.6.1.  I guess the last thing I have not tried a clean install of windows?  It seems that the jury is detected outside of windows, and it seems he has control of the case, but it will not work with the command center.  I'm willing to try anything.  I always liked the look of the fins upward on the case and I would like to have it back.

  Here are some pictures of the diagnostic tests and the results: http://imgur.com/a/EwujG

  PROBLEM SOLVED EDIT: Removed the bad part, which was the original conditions of over-current onboard MIO (in this case, it is the bluetooth).  If someone reads this trying to problem solve their own Council, LISTEN to CASS OLE! If I had followed their instructions earlier I could have saved them a lot of time and a lot of forum posts.  CASS Ole is wise.

  Thank you cass and tesla for all your help.  I can't thank you enough for what you have helped me.

  old parable of the young bull who wants to sink & "wrestle" with one, while the oldest bull said: no, we're going down & wrestle with all the em > estimated colleague was polite enough to report an error on my part: 7 > drivers > .net4 > CmndCntr etc.

  After the point your USB3 drivers are installed, it was me, it's when I would turn off & finally plug mio usb_3 back, running up to the top > look for 7 install driver mio:

  

  Mio driver listed under HID devices > the driver has installed, or you'll have nowhere

  • .net4

  Later at the end, after installing CC, go light/dark > check your tray for alienhead area notification icons (right clik > go light green alien = / off alien = red) & thermal icon (rt clik > settings)

  
  disable updates

  Working AlienFx tower above

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

• Need help with Overclocking Alienware Area 51 Command Center Application

  Just got my Area 51 today and do not understand how to use overclocking in the command center.  Is there documentation on how to use it.  A couple of "Level1" and "Level2" buttons are displayed, but do not seem to do anything?

  Thank you!

  This is overclocking tool, so that soon you click in the level you want to use and save the changes to the system will change the speed of clocks on its own in real time.

• How to install Alienware Command Center on Clean Windows 8.1 (Alienware X 51 R2)?

  I had to do a clean install of Windows 8 on my Alienware X 51 R2 and now I am trying to install all the drivers and applications. I've got work except the Alienware command center.

  I am trying to install the following file:

  http://goo.GL/fl9F3K

  But I get the message "this installation package is not compatible with this platform.

  Hi Maurung!

  It is an older version of the command center for the X 51 R1, not the X 51 R2. Try to install the last Command Center 3.5 instead.

  If you still have problems with him, make sure that you have installed all of the drivers listed here in the order specified in the article.

  Let me know how it goes!

• Where to download Alienware FX/Command center?

  Hello

  I don't see this in the downloads available for my Alien Aurora R4.  In the applications on the drivers and downloads section, it lists only the update of Dell and Dell Digital delivery.  No other downloads are for the Alienware software.

  Download/save the Aurora-R4 Windows 7/8.1 authorized command center on your Windows desktop. Right click on the saved file, click on the Compatibility tab, choose the compatibility mode, then run it.

• Aurora-R4, last validated Command Center = 3.6.5.0 A04

  Hi all

  I would like to ask if it is possible to install the new 4.0 on the Aurora-R4, or at least command center if it will be possible. Would be really great.  Now I have version 3.5.

  Thank you

  According to the release notes, no. Although not supported by Dell, you can uninstall the CC35, reboot, install and test new versions. If no go, uninstall them, reboot, then reinstall the CC35.

  3.6.5.0 A04
  www.Dell.com/.../driverdetails
  Aurora-R4
  Windows 7/8.1

  4.6.18.0 A00
  www.Dell.com/.../driverdetails
  Aurora-R5
  Windows 10

  4.6.15.0 A00
  www.Dell.com/.../driverdetails
  Aurora-R5
  Windows 10

  4.5.18.0 A01
  www.Dell.com/.../driverdetails
  R3 - X 51
  Windows 8.1/10

  4.0.51.0 A02
  www.Dell.com/.../driverdetails
  Area 51 - R2 X 51 - R2
  Windows 10

  4.0.51.0 A02
  www.Dell.com/.../driverdetails
  Area 51 - R2 X 51 - R2
  Windows 7/8.1

• Command center Alien not finding my camera.

  Hey everybody

  Ive got an alien ware laptop mx17 r4 and my brother gave me it and removed everything like it was brand new, but he left his old color scheme and now I want to change it. I downloaded the latest version of the alien command center and it comes up with two warnings:

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.NullReferenceException: Object Reference not set to an instance of an object.
  at AlienLabs.AlienFX.Controller.ControllerMainForm.closingApplication)
  at AlienLabs.AlienFX.Controller.ControllerMainForm.controllerMainFormFormClosing (Object sender, FormClosingEventArgs e)
  to System.Windows.Forms.Form.OnFormClosing (FormClosingEventArgs e)
  at System.Windows.Forms.Form.WmClose (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at AlienLabs.AlienFX.Controller.ControllerMainForm.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  AlienwareAlienFXController
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/Program%20Files/Alienware/Command%20Center/AlienwareAlienFXController.exe
  ----------------------------------------
  AlienwareAlienFXTools
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienwareAlienFXTools/1.0.92.0__bebb3c8816410241/AlienwareAlienFXTools.dll
  ----------------------------------------
  Alienlabs.CommandCenter.Tools
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/Alienlabs.CommandCenter.Tools/1.0.92.0__bebb3c8816410241/Alienlabs.CommandCenter.Tools.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8681 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  AlienLabsTools
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabsTools/1.0.92.0__bebb3c8816410241/AlienLabsTools.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8679 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  WindowsBase
  Assembly version: 3.0.0.0
  Win32 Version: 3.0.6920.8693 built by: QFE
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/WindowsBase/3.0.0.0__31bf3856ad364e35/WindowsBase.dll
  ----------------------------------------
  PresentationFramework
  Assembly version: 3.0.0.0
  Win32 Version: 3.0.6920.8693 built by: QFE
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/PresentationFramework/3.0.0.0__31bf3856ad364e35/PresentationFramework.dll
  ----------------------------------------
  PresentationCore
  Assembly version: 3.0.0.0
  Win32 Version: 3.0.6920.8693 built by: QFE
  Code: file:///C:/WINDOWS/assembly/GAC_32/PresentationCore/3.0.0.0__31bf3856ad364e35/PresentationCore.dll
  ----------------------------------------
  System.Management
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
  ----------------------------------------
  AlienFX.DeviceDiscovery
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienFX.DeviceDiscovery/1.0.92.0__bebb3c8816410241/AlienFX.DeviceDiscovery.dll
  ----------------------------------------
  AlienLabs.MasterIOBoard.Communication.Core
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabs.MasterIOBoard.Communication.Core/1.0.92.0__bebb3c8816410241/AlienLabs.MasterIOBoard.Communication.Core.dll
  ----------------------------------------
  AlienFX.Communication
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienFX.Communication/1.0.92.0__bebb3c8816410241/AlienFX.Communication.dll
  ----------------------------------------
  AlienLabs.MasterIOBoard.Communication
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabs.MasterIOBoard.Communication/1.0.92.0__bebb3c8816410241/AlienLabs.MasterIOBoard.Communication.dll
  ----------------------------------------
  System.Core
  Assembly version: 3.5.0.0
  Win32 Version: 3.5.30729.8693 built by: QFE
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  Technology LightFX
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/LightFX/1.0.92.0__bebb3c8816410241/LightFX.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
  
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  and the following:

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.NullReferenceException: Object Reference not set to an instance of an object.
  at AlienLabs.AlienFX.Controller.ControllerMainForm.closingApplication)
  at AlienLabs.AlienFX.Controller.ControllerMainForm.controllerMainFormFormClosing (Object sender, FormClosingEventArgs e)
  to System.Windows.Forms.Form.OnFormClosing (FormClosingEventArgs e)
  at System.Windows.Forms.Form.WmClose (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at AlienLabs.AlienFX.Controller.ControllerMainForm.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  AlienwareAlienFXController
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/Program%20Files/Alienware/Command%20Center/AlienwareAlienFXController.exe
  ----------------------------------------
  AlienwareAlienFXTools
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienwareAlienFXTools/1.0.92.0__bebb3c8816410241/AlienwareAlienFXTools.dll
  ----------------------------------------
  Alienlabs.CommandCenter.Tools
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/Alienlabs.CommandCenter.Tools/1.0.92.0__bebb3c8816410241/Alienlabs.CommandCenter.Tools.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8681 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  AlienLabsTools
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabsTools/1.0.92.0__bebb3c8816410241/AlienLabsTools.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8679 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  WindowsBase
  Assembly version: 3.0.0.0
  Win32 Version: 3.0.6920.8693 built by: QFE
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/WindowsBase/3.0.0.0__31bf3856ad364e35/WindowsBase.dll
  ----------------------------------------
  PresentationFramework
  Assembly version: 3.0.0.0
  Win32 Version: 3.0.6920.8693 built by: QFE
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/PresentationFramework/3.0.0.0__31bf3856ad364e35/PresentationFramework.dll
  ----------------------------------------
  PresentationCore
  Assembly version: 3.0.0.0
  Win32 Version: 3.0.6920.8693 built by: QFE
  Code: file:///C:/WINDOWS/assembly/GAC_32/PresentationCore/3.0.0.0__31bf3856ad364e35/PresentationCore.dll
  ----------------------------------------
  System.Management
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.8670 (QFE.050727 - 8600)
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
  ----------------------------------------
  AlienFX.DeviceDiscovery
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienFX.DeviceDiscovery/1.0.92.0__bebb3c8816410241/AlienFX.DeviceDiscovery.dll
  ----------------------------------------
  AlienLabs.MasterIOBoard.Communication.Core
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabs.MasterIOBoard.Communication.Core/1.0.92.0__bebb3c8816410241/AlienLabs.MasterIOBoard.Communication.Core.dll
  ----------------------------------------
  AlienFX.Communication
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienFX.Communication/1.0.92.0__bebb3c8816410241/AlienFX.Communication.dll
  ----------------------------------------
  AlienLabs.MasterIOBoard.Communication
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/AlienLabs.MasterIOBoard.Communication/1.0.92.0__bebb3c8816410241/AlienLabs.MasterIOBoard.Communication.dll
  ----------------------------------------
  System.Core
  Assembly version: 3.5.0.0
  Win32 Version: 3.5.30729.8693 built by: QFE
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  Technology LightFX
  Assembly version: 1.0.92.0
  Win32 version: 1.0.92.0
  Code: file:///C:/WINDOWS/assembly/GAC_MSIL/LightFX/1.0.92.0__bebb3c8816410241/LightFX.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
  
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  so after I press on continue twice he begins to replace the files, because I do a repair and it asks me to choose my model I chose mx17 and then I restart it like he asked and I just get a white screen with no option to choose a box or change the colors. or this is what im blind and can not find the devices pane

  Sorry for the long post

  Hello

  What Windows operating system you are running with your Alienware? Try to uninstall the Alienware Command Center application in the list of programs and features first, then restart the system and install the Command Center application again. Click here for the Alienware Command Center application download link.

• (Redirected) Aurora R4 CPU Fan problem (command center)?

  My R4 for over a year (so the warranty is released). Just before warranty missed, fans began to everything going haywire. I contacted support and they have updated my BIOS and uninstalled/re-installed my remote control center. Which fixed most of the fans. Then I updated to windows 10, and everything was still fine. A month later, I had a system crash (wouldn't start upward) and took the PC to a local technician who found little bad ram was the only problem. Unfortunately, he drove my drivers back to before the bios and the command center have been updated (I don't know why). So, fans again started going crazy. I've updated the BIOS myself and that fixed some of the fans, however, the CPU fan is always crazy. If I run a program more complex than playing a video file, the CPU/system fan goes up to maximum speed (> 5000 RPM). In the control of the temperature, all times are stable around 27 to 28, so I don't know why the fan is too reactive. Also, I don't know why it lists the 0 system fan and the cpu fan at high speed, I've mentioned. Looking inside the machine, I can see that each fan is on, so no fan should be set to 0.

  I've heard talk of uninstall command center and reinstalling it would help, but I was not able to repeat myself that I can't find the dell control center download more. In the page drivers Aurora R4, it isn't appearing any more for download and I don't want to delete it until I have a way to download again. My command center is listed as 3.6.5.0. I have no way of knowing if this is the last version, I can't find any control center files or current information on alienware.com or dell.com anywhere. I doubt replacing the command center will solve the problem, but it is frustrating that I can't even try. Heck, even the link to the support site for "Alienware drivers and applications" leads to a dead link now (a page that won't load). If this expensive platform becomes a brick after all just a year, I don't see myself ever buy (or sell) products dell again.

  My system is an Aurora R4 with Intel (r) Core i7 - 4820 K Pro. Running on windows 10.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• star wars command center problems

  Hello, I just took possession of a portable star wars limited edition, I can open the command center, but I need to know how to raise R2D2 and the small figure in light, thank you very much

  Hi @garyrwhitaker,

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice. You have a rewarding experience, I would include the following link for your perusal and reference. First time here? Learn how to publish and more.

  I understand you've got a laptop HP from Star Wars limited edition. You can open the command center, but t you want to know how to make appear R2D2.  After some research, I believe you can do it by choosing one of the special themes Windows as we should be R2D2.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem. "Think about scoring the post that solves your problem as" ","accept as Solution " to help other members of the community! To say thanks for the help, please click "Thumbs Up icon" below.

• Change the headings used in Command Center?

  I was wondering if there is a way to change the elements used in the command center? For example, to replace the calendar with something else.

  Thank you

  There is currently no way to change the applications that are launched via app Droid Turbo command center. The clock, batteries and the Accu Weather apps are the main applications, and calendar via the "Pop out" are the only ones available.

  There are other applications on the game you might like better as the "Rings Digital Weather Clock" you might find more functional for a particular use from you.

  I hope this helps!

• Brother MFC-885CW Inkjet Multi: Reinstall Control Center 3 after upgrading Windows 10

  Hello

  I have recently upgraded my HP with Windows 10 desktop computer, hated, then returned to Windows 8.

  After returning to Windows 8, my 3 command center does not open, just a blank white screen appears I can't close unless I go into task-master & close it manually.

  CC has worked perfectly until I upgraded & I read somewhere that windows 10 uninstall incompatible programs when he did the upgrade to 10.

  Can someone help me to reinstall CC 3?

  HELO.

  Uninstall the KB3119147 update

• Why not, t I receive my Security Center to run on windows xp, I was told to contact microsoft

  Hi my Security Center doesn't appear when I press the button to place a message says that it, t not available.i have a better idea, why don't you take control of my computer and sort it out for me?, very easy for you with your technical skills, will be to you?

  It is not Microsoft, so it is not remote from us.

  These are public Forums set up by Microsoft on their servers and animated by them.

  We are mainly Windows users help each other here for free.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#winxo

  Windows XP

  Using the F8 method:

  1. Restart your computer.
  2. When the machine starts first, yet once it will list usually some equipment that is installed on your machine, amount of memory, hard drives installed etc. At this point you should tap the F8 key repeatedly until you are presented with a menu of Advanced Options in Windows XP.
  3. Select the Safe Mode with networking option using the arrow keys.
  4. Then press enter on your keyboard to start safe mode.
  5. Make all the necessary tasks and when finished restart to start in normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)