Command net View does give "No entry in the list" in Windows 7

Similar Questions

• Show the different regions by clicking on the entries in the list

  Hello world
  
  I have a page with several regions, but I want to only show one at a time; I want you to show with a checklist. So, whenever I click on an entry in the list, I want to see a specific region and if a click on a second entry in the list, I want to see another. It must be without submitting the page (for different reasons).
  
  An example of I want to do is when you change an element in the APEX; You can see a list of buttons 'Show all', 'name', 'Displayed', 'Label', 'Settings', etc. Function of the key, you click, you will see a different region.
  
  I think it is a very sleek and elegant way to show a lot of information to users, if only I could apply it... any ideas? :)
  
  Thank you
  Elena.

  Elena.MTC wrote:

  I have a page with several regions, but I want to only show one at a time; I want you to show with a checklist. So, whenever I click on an entry in the list, I want to see a specific region and if a click on a second entry in the list, I want to see another. It must be without submitting the page (for different reasons).

  An example of I want to do is when you change an element in the APEX; You can see a list of buttons 'Show all', 'name', 'Displayed', 'Label', 'Settings', etc. Function of the key, you click, you will see a different region.

  I think it is a very sleek and elegant way to show a lot of information to users, if only I could apply it... any ideas? :)

  4.1 the best way to proceed is to use the integrated Region Selector display.

  After you have created the RDS, customization is necessary to display only one region at a time.

  1 hide the RDS "Show all" link (and change the second link to resemble the first) by adding this stylesheet in the header HTML page:

  2. by default, all regions will be displayed when the page is loaded. Hide others using dynamic Action to simulate a click on the first link in the region of the RDS and the first region:
  H4. When

  Event: Page load
  H4. Real Action

  Action: Run the JavaScript Code
  Fire on loading the Page: No.
  Code:

  $('.apex-rds-container li:first-child+li a').click()
  

  See this article to view region selector sticky if you want the value of the visible area to be preserved if the page is refreshed.

• CMDGW_CAT:3441: ERROR: can not have more than 3 entries in the LIST RACCESSPOINT

  Hello
  I have Tuxedo 8.1 in HP - UX.
  
  
  In the section of my dmconfig that I have:
  
  ....
  .....
  
  SERVICEF LDOM = DOMLOCAL RDOM = WTC1, WTC2, WTC4 WTC3
  .....
  .....
  
  I have this error when I tried to compile with dmloadcf y dmconfig:
  
  Invalid value
  CMDGW_CAT:3441: ERROR: can not have more than 3 entries in the LIST RACCESSPOINT
  CMDGW_CAT:1546: ERROR: dmloadcf: above the errors found during the syntax check
  
  increase the value of the parameter RDOM plus 3?
  How?
  
  Thank you...

  Hello

  Syntax:

  Service LDOM = local_domain RDOM = dom1, dom2, dom3

  sets the remote domains of failover for this particular import. It is not intended to provide access to a service in several areas. What you want, it's basically what you were doing, i.e.,.

  Service LDOM = local_domain, RDOM = dom1, dom2
  Service LDOM = local_domain, RDOM = dom2, dom3
  Service LDOM = local_domain, RDOM = dom3, dom4
  Service LDOM = local_domain, RDOM = dom4, dom1

  It would provide balance between the 4 areas and always provide areas of failover, although assigned to the ON_STARTUP linking strategies, then the following is sufficient:

  Service LDOM = local_domain, RDOM = dom1
  Service LDOM = local_domain, RDOM = dom2
  Service LDOM = local_domain, RDOM = dom3
  Service LDOM = local_domain, RDOM = dom4

  As only active areas will be used and those inactive is ignored.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Windows give error 0x8DDD100A during the validation of windows Xp Professional SP3

  Windows give error 0x8DDD100A during the validation of windows Xp Professional SP3

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: sync clock error
  Validation code: 10
  Code of Validation caching: n/a
  Windows product key: *-* - XC4Q9 - W7RTD-7Q8G6
  Windows Product Key hash: Py7sqDcPBx6etfYqog5bPl/YZ9E =
  Windows product ID: 76487-OEM-2211906-00826
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 5.1.2600.2.00010100.3.0.med
  ID: {5DBB45BE-2BA5-44AD-92B3-2FE66CB59B95} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: Yes
  Version: 1.9.9.1
  WgaTray.exe signed by: n/a, hr = 0x80004005
  WgaLogon.dll signed by: n/a, hr = 0x80004005

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-230-1

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {5DBB45BE-2BA5-44AD-92B3-2FE66CB59B95}1.9.0027.05.1.2600.2.00010100.3.0.medx 32*-*-*-*-7Q8G676487-OEM-2211906-008262S-1-5-21-1232634059-1876962941-2206964983Sony Corporation,VGN-AR11MPhoenix Technologies LTD.R0130J620060626000000.000000 + 000Sony Corporation, Sony Corporation, Sony Corporation2BD13F07018400FE08090409New Zealand Standard Time(GMT+12:00)02Corporation SonyVAIO VGN - AR series109

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 1FF90:Sony Corporation | 1FF90:Sony company ITCNC
  Marker of OEMBIOS string. DAT: Sony Corporation, Sony Corporation, Sony Corporation

  Activation 2.0 data OEM-->
  N/A

  Check your region settings, Date and time in Control Panel - you are a clock synchronization error.

• I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I am trying to download the trial version of Adobe Pro XI but the Download Assistant does not display it in the list despite the signing in. What is wrong with him?

  I had the same problem - my solution:

  1. If you create a connection to Adobe, make sure that you click the verification link in the email sent to you to verify your account.

  2. I leave the download Assistant, then began the process to download the original page download Assistant - he asked if I wanted to run the already downloaded version, which I chose.

  3. once the download wizard opens again, I logged in using my newly created connection and then, he showed the free trial in the product list (it has not been listed as free, but it was).

  My download is happening now - about 1 hour to go.

• Add description/help to the entries in the list on a white page

  Hi all
  
  I'm on a white page, show 3 entries in the list, for each I want to associate a description/help for them. This help/description text should be non-interactive (no hyperlink) and preferably in a different font color. I tried to change the value of the label, but that doesn't help me, as all the text becomes clickable. Help, please
  
  Thank you
  Mary

  Hello

  Ok...

  1 - first of all, I created a new list template (through the shared components, lists) based on a copy of the existing model "Vertical unordered list with bullets" - I called a "vertical non ordered list» new with chips with comments I changed only TWO parameters in this new model:

  Current model list:

  <li><a href="#LINK#">#TEXT#</a> <span style="color:red">#A01#</span></li>
  

  Model list associated:

  <li><a href="#LINK#" style="color:#A01#">#TEXT#</a> <span style="color:red">#A01#</span></li>
  

  2 - I've updated my entries of the list to include text in the 'User-defined attributes' parameter number 1

  3 - I have edited the list definition to use my new model

  4. I also made sure my region of the page that contains the list using this new model - either by setting the model list to substitute "- use of the list template -" or "vertical unordered list with bullets with comments.

  And that's all I've done

  Andy

• Add/Remove Programs does not have entries in the program

  Original title: Please HELP

  Dear community,

  My programs for adding and deleting on my windows xp does not, or suddenly become empty please help

  Hi mick davidson,.
   
  This problem may occur if the uninstaller for a program incorrectly removes registry entries that are used by Windows and the Add/Remove Programs tool.
   
  Run the fix it tool given in this article and check if this may help in fixing the issue:
  Incorrectly, Add/Remove Programs tool displays installed programs

• Two entries in the list of printers MAC Applications - one prints wireless / the other does not work

  Just implement the 4630 and in the list of printers on the Applications, I have 4630 series and the 4630 [F4COCE].  Printed wireless and the other not.  I have the fax 4630 also but you have yet to try.  Why have I not two in the list of printers, and I would like to delete a?

  Hi BreezyP,

  Welcome to the HP Forums!

  I see that you have two printers on your Mac, and you wonder why. I'm happy to help with this problem!

  In my view, the second printer that does not print wireless, is the connected USB printer. If you unplug the USB cable connecting the two ends of the Mac and the printer, it should show offline.

  Regarding the deletion of a printer, it's a personal preference, if you do not use the USB cable at all, I would personally delete the one which is not wireless.

  The fax printer is used for the fax from Mac.

  Hope that answers your question and have a great day!

• Table or view does not exist - ONLY in the procedure?

  I'm trying to write a procedure that is very simple - the only thing at this point, I'm trying to get it to do is an insert into a table - selected values from one schema to another user (on which I have select privileges to). When compiling, you receive an error ORA-942 - table or view does not exist. However, if I put the same insert statement in an anonymous PL/SQL block, it works as expected. What Miss me?
  
  Oracle 10.2.0.3.0 on AIX 5.3

  You are missing the explicit subsidies on the table.

  When you issue this through SQL * Plus, or through an anonymous block you use grants which are given by a role.
  Inside PL/SQL procedures, you cannot use the permissions that come with roles. Instead, the user must have appropriate subsidies being explicitly for the operations required on this object.

  GRANT SELECT / INSERT etc. on this table to the user explicitly and it will work.

• Can you give me advice on the maintenance of windows 7 please?

  I have reset my desktop computer windows 7 64 bit to factory settings, but for the first time in 5 years I did not put any software melody in it. in the past, I got tuneup utilities, avg pc tune up, boostspeed, pc tools and norton clean (not all at the same time over the years lol). Anyway, I have been using since restored factory 3 days ago is the cleaning of windows disk 7, defragmentation and basic ccleaner (with no boxes checked only the value default ones). of course, when I uninstalled the * software preload I deleted the registry entries manually as I always do and found the left on the software manually using the Sub tools all research. After much searching around google, the reason for which I have not installed a tune up software is because they have all said that they have done more damage that good which I now believe it is true because my pc is running much better without it. BUT it is slow light, but what I'm asking, it is, is what I'm using enough or there at - it all the other tips you can give? Thank you very much

  As you've found third tune up utilities can and are causing problems.

  Do not use the module registry CCleaner

  Theres no point in removing reg entries, it does nothing for the performance

  Disk Cleanup and defrag you just use

• Receive an error message "Audio service does not ' and 'volume' in the list of notifications is grayed out

  * Original title: Audio Service does not. I have audio but no volume control in the taskbar, also "" volume"in its notification list is gray out

  Using Windows 7. My Audio service does not. I have audio but no volume control in the taskbar, also "" volume"in its notification list is grayed out.

  Hello

  1. when exactly you get the error message?

  2. do you see a red brand 'X' indicating that the audio output does not work with error message?

  Please follow the steps below and we update with the results.

  Method 1:

  a: you can try to enable the taskbar.

  b. right-click on the taskbar (the bar at the bottom of your screen), select Properties.

  c. click the Notification area.

  d. then, under system icons, select the Volume that you want to display

  Run Microsoft Fix it the following article and check.

  http://support.Microsoft.com/default.aspx/KB/945011/en-us

   

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

   

  Method 2: Ensure that the Windows audio service is running on the computer.

  a. open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right click on Windows Audio serviceand then click Properties.

  d. under the general tab, next to startup type, make sure that Automatic is selected.

  e. also make sure that the service is began to.

   

   

  Method 3:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

   

  Method 4:

  Install the latest audio drivers on the computer by visiting the sound card manufacturer's Web site and check if it works.

   

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Note: visit the manufacturer's Web site to download the latest audio drivers

  For more information, see the article:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=Tab03

  Let us know if it helps!

• How to have an entry in the list 'No. Target' parent not 'clickable '?

  I use DHTML tree as my list template and the list is added to the zero page in the Navigation area model. All entries in the child list are working properly and the parent entry list is set to "No Target". However, when I mouse over the parent entry list, the list of entries parent stills show that there is a clickable link, even if it does nothing if I click on it. It is misleading. If it is a 'feature', is anyway do disable it or bypass it?

  A better way to disable the link of the parent list item is to choose the "target Type" = "URL" and "The target URL =" #" When the user clicks on the parent list element, the browser would simply navigate to the top of the web page itself. In other words, he would just stay on the same web page, and there is not even a page refresh must be executed.

• Essbase Service does not appear on the list of Windows Services

  Hi gurus,
  
  I tried to install the Hyperion Essbase 6.2.4 on Windows Server 2003 version and most of the thing works except that the Essbase Service itself does not appear on the Panel of Windows Services, whether on the previous installation of Windows 2000 Server.
  
  I tried reinstalling the software but the problem is still not resolved. I need to have Essbase Service on the list to allow the availability of service 24 x 7.
  
  I know that the Essbase version is quite outdated, but I'd be happy to hear from you guys.
  
  All advice please?
  
  Thank you.

  In version 6, you need to set your ip to the service. Go to start run and type cmd and click ok
  Then in the command window type
  Essbase.exe - service installation and press ENTER. The device must install.

• (RH9) 'See also' - how to make * not * clicks when only one entry in the list?

  I have several topics (A, B and C) in which I want to place a control 'See also' that has two subjects (B and C) inside.

  In the A section, click on the control see also appears a list of "A" and "B". Click each item in the list to access the topic.

  In the B section, click on the control see also jumps directly to heading C.

  In the C section, click on the control see also go directly to section B.

  Is there a way to force the control to * always * bring up a list of subjects "see also"? For example, in section B, I would like to control to display a list containing just heading C.

  Hoping that...

  Thank you.

  Hello

  Administer a test.

  Click your related topics in WYSIWYG button and switch to HTML view.

  You should see a quantity of larg of the code presented in green, followed by a small amount of what looks like the code repeated in dark red.

  Copy the following line (including the < and="" the=""> and add the following line to each area.)

  Give it a go and see how you rate.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Put in regular page of e-mail does not display message in the list messages

  Hello

  I've updated my MacBook Pro at El Capitan and my wife Airbook.

  We both use the classic layout in Mail.

  After the update my Mail shows the message in my message in the message list a list (as it always does) I use this option so I don't have to double-click Mail and open it in a window separate to read.

  On Airbook my wife a message highlighted in the list does not appear in the list. (there is a small circle at the bottom of the list and hovering over him the cursor moves on the symbol to stretch or shrink the window, but it is just not there). She had it works just like mine before moving to El Capitan.

  This thread: Mail (El Capitan): display the preferences

  "says:

  Use Classic layout

  By default, messages are displayed next to the list of messages. To make messages appear below the list of messages (typical configuration), check the box. »

  I'm not sure what this explanation or if she's talking about my problem.
  I have no idea how to get the classic page layout to work the way it did before.
  Can someone help me get mail on the Airbook to redisplay the message highlighted in the list under the list?

  THX
  Brick

  Hello brick,

  Thank you for using communities of Apple Support.

  I see that your wife's Mac shows the display of the message during the classic presentation.  As you can see the small circle at the bottom of the screen, indicating that the screen has been pushed all the way down, eliminating the part look at a message.  Simply click, hold and drag the symbol upwards to bring this part of the Mail window.

  See you soon.