comment in the code mode function does not

Similar Questions

• The transfer of the PID block function does not show the derivator.

  Hello

  I try to use the vi of PID, but I when I try the box by itself, it does not behave as a 'classic' PID should behave. The main problem is that I can't see the derivator. In the attached vi, I compare the transfer function of the PID vi with the function of transfer of a PID built by me. My version shows should have all what a PID: section integral (with an amplitude decreasing and phase-90), Center (with a constant amplitude and phase 0) and area derived (with the magnitude and the phase of + 90).

  

  The PID vi shows that the part.

  

  You can also select a progressive input signal and see the result directly. If you choose a large enough time to bypass (100 times greater than the time to the Integrator), and you look closely at the first part of the output, you will see the choice because of the derivator in my version, but not in the version PID.vi.

  Anyone know what I am doing wrong?

  Kind regards

  Pablo Estevez

  Nathand dear,

  Thanks for your reply, I tried the change and you are right. This shows that's not a PID standard, since this means (and in fact I can see it now by checking within the vi) is not using the derivative of the error, but the derivative of the process variable. I know that it is sometimes used to prevent the effect of fast changing set points, but it's a shame that they don't how about it in the help, and that's not a selectable feature. Do you know if there is a way to edit these pre-packaged vi?

  Another question, about the style of labview. I've included the footage just for the terms of the Group and to make the code more readable separate the integrator of the derivator and not having a knot of tangled signals. Especially when I run the cleaning diagram, it becomes very tangled. I searched for another way to do this (container boxes, groups). Would be nice if you could suggest me something that I can do for her.

  Thanks again,

  Pablo

• cRIO: error 7 to read Volume information: I want him to stop the code to run does not appear a dialog box

  Hi, I have the following code which stops when a multibordure error.

  But in the case of "Error 7", the code instead of stop, shows a dialogue with 'Continue' botton illustrated in the following figure.

  I was wondering how I can change the code in a way that "Error 7" would have done stop the race continues to process does not open a dialogue with botton. In addition, I have the simple error handler at the end of the code.

  

  //////////////////////////////////////////////////

  

  ////////////////////////////////////

  

  ////////////////////////////////

  

  The simple error handler is what triggers the dialog box.  Read the help file on this function.

  If you want to stop based on a mistake, ungroup the cluster of error for status and the wire in the terminal stop ORing with everything cause normally your loop to stop.

• The "Open with" function does not work.

  'Open with... '. "does not work. I have Win 7. Usually when I have a new type of file can I associate a program with this extension, but recently I am unable to do so. I have a midi file normal (extension .mid) and I try to associate a program with it with the function "open with...". ", I choose the program from the list, but after that the function"open with... ". "forget my selection. I looked at regedit, to try to solve the problem, but I could not understand what I have to change.

  Here are a few topics for you at checkout.

  Problem with the menu 'Open with' - Microsoft Answers:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/problem-with-open-with-menu/76b17b64-2Fe3-4c08-ac80-0ba80334dd8e

  Cannot select the program in 'open with... '. "- Microsoft Answers:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/cannot-select-program-in-open-with/860fe524-4803-4c94-8ca7-7eac2649356c

  Can't 'open with... '. ', or define associations of files - Microsoft Answers:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/cant-open-with-or-set-file-associations/d9452df6-c2c7-462e-B2ca-646f0ea782bd

• video recording on the camera application function does not

  My app windows photo 8 shows the video recording features, however nothing happens when I try to use it. I had no chance in the troubleshooting update and windows updates to fix this problem. How can I get the video camera recording function to work? Currently when I select the video mode, it absolutely nothing happens.

  Hello

  Are you able to take pictures using photo app?

  It seems that there is something wrong with the camera application.

  So, I suggest you follow these methods and check.

  Method 1:

  Run applications troubleshooting

  Download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  For reference: app photo and webcams: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/camera-app-FAQ

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• How can I get MS Money Plus activity when I move it to a new computer? The code I have does not work.

  I installed the money twice on a computer of olde.  I finally bought a new computer and you want to install on the new.  But the code no longer works.  How can I activate?

  Activation Microsoft Money Center is closed and you can enable is no longer a retail Money version.  Get the product Microsoft Money Sunset unlocked http://www.microsoft.com/en-us/download/details.aspx?id=20738.

  All online services money died on January 31, 2011.

• Installed new microcomputer, LibreOffice, but the "open with" function does not recognize it

  I recently downloaded suite desktop LibreOffice, but OPEN WITH function recognizes not all programs.  How can I fix it?

  Contact support LibreOffice.

• The iTunes search function does not work because I have upgraded to iOS 10

  IiTunes load as usual when I open the app, but when I try to search some research forever.  I'm doing the fix for this issue.  If I am forced to use Amazon instead, there will be loss of apples.

  What have you tried so far? for example you have:

  -closed the app Store in iTunes via the taskbar of the phone

  -do a soft-reset/reboot the phone

  -tried another network

• The web search function does not work on FF15.0

  Just took the 15.0 update. I can't enter in the search field

  Yes, this is the search bar.

  There was a change to the search bar in 15.0, the 'name' of the search engine is not clear until you type the first character, the cursor blinks behind the G in Google.

  Another Firefox 15.0 user reported a problem with the theme they were using. Try the default theme and see if the problem goes away.

• Why the keyboard shortcuts/function does not work on Satellite Pro A200?

  I did some research for almost two hours now and no solution.

  I want to do is to be able to use the Fn key for shortcut keys the F0 - F12 Fn + ESC to mute the sound, or button Fn + F6/F7 to set the brightness on my screen. I am running Windows XP, these information are necessary. Things I've tried so far was installing utilities Toshiba, such as the Fn-accessibility and Fn-esse, but they still do not work.

  I have no idea why they have not worked since I arrived to my laptop. Help, please! Thank you!!!

  In the history of the most important info is missing: what model of laptop do you have?
  Please send the exact model number.

• Windows 7 in the Explorer search function does not work

  (1) I inserted a library to a project. This library is simply refers to a path on my hard drive

  (2) since I can't search for files or folders in the linrary (in the library itself or normal
  Explorer path). There is always a 0 result

  (3) in this 'library', I have subfolders. If I move a subfolder in another location on the hard drive, the research works

  (4) is there a solution to this problem in the meantime (I know that other users have the same problem)

  (5) if I use a shareware-Explorer, the research works
  But I'm on windows 7 (windows 7 ultimate), so this 'simple' search feature is a WORK MUST!

  (6) I think that its all about the library feature that really works, then, how can I get rid of the wihout library
  erase the existing roads on the hard drive? Is there an official statement for this?

  concerning

  Peter

  Hi Peter,.

  Search in the new library or outside it should work perfectly well as in others.

  Try the following steps to understand what could cause this problem.

  Step 1: Run Troubleshooter

  For your reference:

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Step 2: Create a new library

  Create a new library and include less fine test files. Now, look for a file in this folder. See if it works.

  In case you need to reference:

   

  Create a new library

  http://Windows.Microsoft.com/en-us/Windows7/create-a-new-library

  Step 3: Verify mode safe

  For more detailed investigation have a look if the result of the research work in safe mode. Post the return result so that we can help you with the same.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer and start the computer on the desk normally once you are done with the check in safe mode.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• in the browser, change function does not not at the end of BC after download with Muse

  HI - anyone else get any problem with the IBE in British Colombia after downloading a site of muse, I am told to support BC it is a known bug, but this site in particular has worked perfectly for a few months someone ' else arises, can not see the updates on the status of the service

  Hi Florian it was a known bug in the system of British Colombia and has been resolved I have

  spoke with bc online and triggered a ticket. Thanks for responding

  John Graham CDHF

  Director-general

  ADCreative London

  adcreative.co.UK

  + 44 (0) 7831 859 672

  [email protected]

  The Samsung Galaxy notes powered by Android

• Search function does not work in a document, all the ideas of solution?

  Nice day

  I use Adobe Acrobat Reader DC 2015 Release Version 2015.008.20082 l. Within the program I asked for updates, and he says that it is current.

  The "Search/search" function does not work even when I clearly see the word I'm looking. Any ideas?

  Thank you

  Meredith

  Hi Meredith,

  Please confirm if you are using Acrobat or Reader?

  Search function will not work if it is a pdf document scanned in image format, you must apply OCR on this file by using Acrobat to be able to search for text in the document.

  Kind regards
  Rahul

• curve adjustment function does not work

  Hi all

  I am trying to bend fitting, a graphic. but the curve adjustment function does not work. I get no output curve.

  which suggests to me u.

  Thank you

  You have been asked to view the code. We cannot solve the photos.

  Matrices X and Y are same length? Is a NaN value? What the output error say you?

  (Also note that in this case, it would be convenient if we don't need to wire x take a look at this idea!)

  This discussion is useless until you attach a real VI and data, so please.

• Paste function does not

  Why is the dough into function does not...

  I am trying to copy and paste a series of buttons in an empty block and paste it into the function is not available?  Is there a limit to the size of the content that can be pasted into a framework?

  You first need to group them. You can only paste one object (and there's a)

  Group considers that) in a framework.

  Bob