Looking at a Subscriber Information Unit

Similar Questions

• Looking for upgrade m7260n information

  Hello.  I have an old m7260n.  Looking to update everything that I can to handle some of the latest video games:

  I understand that I have my system will take care of 4 GB, but do not know how fast RAM I should get.

  I want to upgrade the processor and would like to know how to determine what CPU improvements will work with my motherboard (which I think is an Asus P5LP-, but not sure).   Also, how the decision factors in choosing a CPU.

  I definitely want to update the graphics card (currently: ATI Radion x300se, 128 MB of DDR memory).  I consider the upgrade to a dedicated graphics card, but don't know if it's possible, or how that will affect my computer when I use it for other basic things.

  I also wonder if I should get a faster hard drive (not sure how to check how fast mine is), or if any solid stare disc would work in my old computer.

  Thank you for helping me to upgrade my computer.

  -Tyler

  You need to open the side panel... If the power supply is 300 w, you don't need to replace it... Basic graphics card works perfectly...

  and yes it will be able to play games... computer lower end of absolutelly will work for general operations...

• A Dell Inspiron 531 computer will be compatible with Windows 7? Conflicting information between sources.

  I looked on these contradictory information, and here's what I found... I'm still not sure about that.
  I found information about this Dell Inspiron 531 computergoing to be compatible with Windows 7 on the site of Microsoft and in the control panel of that computer system information.
   
  But then I found more information on the Dell website that indicates otherwise.
   
  Please follow me closely here, it took some time to compile this info.
   
  Allows first eliminate what would be the simplest solution I already tried, that would be the "Windows 7 Upgrade Advisor" located at this address: http://Windows.Microsoft.com/UpgradeAdvisor
   
  On this Web page, there is a small program to download and install that is supposed to tell me if this computer is compatible with Windows 7 in processor speed, RAM, graphics card, etc. and devices, automatically... Unfortunately, it does not work... I installed it and it stopped with the message: "Windows 7 advisor stopped working" so that program and this option is unnecessary.
   
  So to see the Web page at this address:http://windows.microsoft.com/en-US/windows7/products/system-requirements 
   
  It is the "Windows 7 system requirements" list of information... it shows that I need at least a 1 GHZ processor or faster, 32-bit... This Inspiron 531 has a 2 GHZ processor and is 32-bit. This page is says I need 1 GB of RAM... it has 1 GB of RAM. It says I need 16 GB of available disk space, it has a C 138 GB primary hard drive which will be deleted when Windows 7 is ready to be installed. And he said that I need a"Graphics card DirectX 9 (with WDDM1.0 or higher driver)" ... the last part in parentheses is the only part that I'm not sure, but my system via the control panel information shows most of this information as being adequate.
   
  Go to this URL: http://support.dell.com/support/edocs/systems/inspd531/en/OM/appendix.htm#wp1149549 to see the Dell Inspiron 531 annex page online and click on the link above titled, 'Specifications' or just scroll to see... there in the category 4th down titled 'Video', it shows the "video integrated Nvidia (DirectX 9.0 Shader Model 3.9 Graphics Processing Unit) '. This seems to correspond to the above listed"DirectX 9" info page "Windows 7 system requirements".
     
  But then there are 2 pages Web of Dell, which indicate that this Dell Inspiron 531 is only supported by Windows Vista and Windows XP... see this URL for this Web page... http://support.dell.com/support/topics/global.aspx/support/osmatrix/index?c=us&cs=19&l=en&s=dhs& ~ ck = mn  
   
  This is another contradictory Dell Web page at the URL:http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&l=en&s=dhs&docid=360683&journalid=910DD2FE57EB5496E040AC0A64E9331A#Issue0_1
   
  It shows, once you scroll down just a bit, a list of the current Dell computers that can support Windows 7... the Inspiron 531 is not on this list.
  This list excludes the Inspiron 531, but it then says' does not have a computer on these lists? Click here to shop for a new Dell! » .. .bad grammar side, this line that I'm pointing out may just be trying to sell me a new Dell computer, if I actually need or not Dell
  !
   
  And finally my info the computer from the control panel shows aprocessor 2 GHZ, 1 GB of RAM or 958 MB anyway and the 32 bit OS.
   
  And Yes, I ran the built-in diagnostic test Dell PSA on this computer and when it tests the sound card and the speakers, he plays the song a bit in each channel and then on both channels, so I know that the material is good on this computer.
  I know it's a lot to go through... it took me a while to compile this info, and I sent a version of this letter with screenshots and other MS Tech in India who I worked with for a month on the phone and email to correct a problem of 'no sound' that simply cannot be beat.
  But I'm trying to make sure before I do a clean install of Windows 7, when the disc arrives here, I don't clean it hard drive alone to experience Windows 7 does not work on this machine.
  Actually, I'm a Mac user and I don't have much trouble in those... Just trying to fix the computer of my mother for it, and now it seems that trying to install Windows 7 is the only way to get the sound back so that my mom can enjoy some music again.
  I never thought that I would like to know as well on the PC troubleshooting I've learned in the last month, but I don't like, and there is still no sound on this computer and everything has been tried... I made a collage of a hundred different error messages from Windows that I think I'll put it up for bid on ebay... I just want to go home to my trusty Macs.
   
  Please give me your comments... I would of course welcome.
  Thank you
  NuMetro

  I am happy that you have it installed, but you have sound?

  I was too surprised when Windows 7 to install all my drivers in device for me!

  The video driver that it wanted to install was even later that of Nvidia. Also, it does not have the driver Physx I needed, so I had to install one myself. The other driver, that he has not installed was the pilot for the X - Fi card. He did install my motherboard if chipset drivers, but I turned around and installed ones that came with my motherboard.

  Windows 7 does a better job to settle on earlier versions of Windows, but do not watch install what he wants to make sure that it does not have something that you don't want. He came along and updated my video driver again, but when that happens, it installs just the driver itself and not the driver Physx and my video control panel. Now when he talks about video drivers, I just go to Nvidia and download the full set.

  You have the option in there for Windows Update to select which updates you want to allow. I would have put to allow you to decide which ones you want and do not let do it on his own.

  I'm glad you're a happy camper! I do not see where you come with Vista, I jumped on this operating system completely because of the horror stories I've heard.

• If my Iphone is offline and I 'clear my iphone' my information be erased as soon as my Iphone is turned on?

  If my Iphone is off but somone else there and who knows my password, if I decide to delete my camera it will mean that my Iphone is turned on and connects to my internet provider that all my information is not available. Or would it take a certain amount of time for my iphone to dry which means that the person who would have a certain amount of time looking through my personal information. Is their anything else I can do to stop this person who is able to access my texts, photos ect. I have enabled mobile data so in theory as soon as my Iphone is turned on it needs to connect to the internet so I would like to know if the erase operation will immediately begin their blocking access to my information, or if it will take some time, which means that they have my password they could connect my iPhone and have however long the takesto clear look at my personal data? Another advise on how I could stop to access my information also would be appreciated thanks.

  On any iPhone running iOS 8 or higher, with a fingerprint reader, Yes, the clear operation is practically instantaneous once the device connects to the Internet and Apple servers.  It won't happen immediately turned on but, as there is always a few seconds delay while the device negotiates a connection to the Internet, then in hand tower with iCloud to Apple servers.

  However, if the person has yourscreen lock access code, they can just put it in airplane mode and browse your content on their own (which they may do even today, since it is showing offline).  In these circumstances, you should assume that all of your personal information are already compromised. Change of account all a.s.a.p. passwords.

• Read the property unit daqmx for a task

  Looking for a way to read the channel units in a task. Now the only way I know to do is actually read data and query data. In this case I don't want to do it this way, I'm looking to read the task units. I have applied custom scales so I know which complicates things.

  Thank you

  What is then?  You just need to dig up the names of the scale.

• Need to buy recommendation on my next photo/goal unit.

  Hello

  To start with what I have now for 2 years:

  Canon 550 d with

  Lens EF-s 18-55mm f3.5 - 5.6 IS STM and

  Lens EF-s 55-250mm f4-5. 6. IS STM

  I saved about $3500 and I am looking for my next investment unit photo/lenses. I'm mainly in the wedding and photography macro, and ocasionaly do sports and wildlife. So far, I used this with a few accessories like triger remote wireless and a tripod for my work. But I guess its time for an upgrade. I would like to stay with canon as a camera brand, but am open to unsupported lenses.  Please put your suggestions for me.

  Thank you.

  Your 550 d (T2i) is an older model, but the sensor is basically unchanged for T3i, T4i T5i, as well as the 60 d and 7 d. The sensor in the new 70 d is improved a bit, but the real difference/innovation in this sensor is the dual pixel technology which is especially good for live view/video.

  A crop sensor is actually good for the sport and macro and wildlife due to the pushing of focal length 1.6 x. The only thing in your list that would really benefit of going full-frame is weddings, where the extra 1 or 2 stops of salvation ISO image quality would be great for Sun/Interior/night shots. A 6 d would be good for that, but good of course none of your existing lenses it if you need new ones.

  You would benefit from autofocus improved sports and wildlife. The 70 d 7 g-d good 19 points AF system, it is really very good.

  No matter what, you must update your lenses. You always put money in glass first, no body. You could really keep the T2i and upgrade only lenses and you would see an incredible help. Here would be my suggestions:

  1.). a fast Prime (or two).
  You have nothing of what is good for shooting in dim light. (premiums) fixed-length lenses are brighter, sharper, smaller and are also less expensive than the equivalent IQ zooms. You could get a 50mm, which is equivalent to 80mm on a crop. It would be stronger than your kit lenses, would be the perfect portrait of head and shoulder-length and leave 4 x more light into the camera. Canon 50 f/1.4 If on a budget ($350.00). The new Sigma 50 mm pre-order if you want something amazing (Google it!) The buzz is huge). for $950,00. He has the IQ of a $4,000 Zeiss lens 1/4 the price. The two works on full frame, if you never like that.

  For the macro, Lenses Canon 100 mm would be great. Or you could get the EF-s 60mm Macro lens that would double as a portrait lens, but which could allow you to get within a few inches of your Macro shooting subject to magnification full 1:1.

  A 35mm would be a long walk-around you. Canon has a good news, and the Sigma fact in his new f/1.4.

  2). a good telephoto.
  The Canon 70-200 is great "big white" L glass and they vary like $700-800 for the f/4 version and non - IS up to the almost legendary f/2.8 IS version 2, which is like $2 300, but is worth it. TIS will be good for the sport and weddings but short for wild animals, especially birds. I hope for the sake of your budget you have no interest in birds, because the super telephoto lenses cost huge dollars.

  See this for weddings: http://www.the-digital-picture.com/Canon-Lenses/Canon-Wedding-Lens.aspx

  And for indoor sports: http://www.the-digital-picture.com/Canon-Lenses/Canon-Indoor-Sports-Lens.aspx

  For the outdoor sports: http://www.the-digital-picture.com/Canon-Lenses/Canon-Outdoor-Sports-Lens.aspx

  For use general zoom: http://www.the-digital-picture.com/Canon-Lenses/Canon-Telephoto-Lens.aspx

  You could do a thing 2 body too, with a little practice. The T2i with a long lens and a 6 d with a 35mm or 50mm for close shots.

• DIMM ERR appears in the system BIOS System Information

  I have a new FM066UT #ABA z400.  I received the additional memory from Crucial.  When I installed the DIMM in slot 2 was defective.   I went there with slot 4 and it was also defective in this market niche.  They replaced and I installed today.  Now when I look at the system information in the splash screen, it shows a yellow ERR on DIMM2.  I moved 2-6 module and system information always displays the ERR and when I go in windows it says I have 16 GB of memory, but only 12 can be used.  What is the problem with slot 2?  A way to fix it?

  Everything is now resolved.  I reinstalled the DIMMs and now everything is fine.

• Subscribed Dump 4.0.0.23 error in constructactionstring

  Hi all -

  I'm under 4.2 (1). I went to run the Dump of the Subscriber information, version 4.0.0.23, on a Unity server and I get this error for each Subscriber, even if I don't select another Contact number as one of the fields - error in the constructactionstring function. Name of illegal conversation: transfer AltContactNumber. DbWalker works with 0 error on the server. Anything else you would recommend that I check? This is the first time I ran the SubInfoDump.exe since the upgrade.

  Thanks in advance! Ginger

  OK, build 26 should do the trick:

  http://www.ciscounitytools.com/APP_subr_info_dump_3x.htm

  all the outputs on all versions of 4.0 (5) and more later put to the test and it seems to be happy now...

• Request for pointers to information on the licence fees for ADF + Weblogic

  We are building an ADF application into a habit techstack ADF Application - Oracle Weblogic, Oracle DB + UCM(Webcenter Content) Techstack + ADF and need clarification on license fees. My understanding is that when we have a license for Weblogic, we reach the ADF with her. My understanding is correct? If so, it holds true for 12 c as well? I checked http://www.oracle.com/us/corporate/pricing/price-lists/index.html and I could see pricing for each of them but could not get clarity if I'd get ADF with Weblogic. I tried a cat live from oracle.com with the sales team, it did not help much either.

  
  

  If you looking for pointers to information.

  
  

  Also, license fees vary in all of the versions (of ADF, Weblogic, DB, Webcenter content) or domain for which we build our product/solution?

  Don't we have special discounts for Gold partners or so?

  We are in the assessment phase and this information is essential for us in the decision-making process to our tech stack and would be great if I could get in contact with someone from the team of sales or licenses from Oracle team.

  Thank you

  Sery

  (Timo, I led Sanchez to post here instead of my personal e-mail)

  Sankar, as long that you bought a stand-alone license for WLS, you have a license for the ADF as he presents himself as a free add-on.  However if you purchased WLS jointly with the Complutense University of MADRID or other products of Oracle hosted the WLS, you should check your licenses to see if there are restrictions in the use of WLS.  In this regard, Timo is correct, you should contact your Oracle sales representative to find out which is correct in this regard.

  CM.

• Account HELP information

  Hello, I booked a monthly subscription of Indesign and I can't look into my booking information. InDesign is woking, money is reserved (e) my credit card every month, but I can't access any...

  I have two apple ID and there is no product is registered. It is said that there are no products purchased or active. I have not received confirmation of the booking of the subscription. I booked it, the money is taken out my bredit card but I would now like to cancel the monthly subscription.

  The subscription used on my Credid card number is 800-833-6687.

  I need someone from adobe to take care of that. I you need any other information to sort this error, please contact me.

  Thank you!

  Susanne Wick

  Hi Susiw,

  Please contact support:

  https://helpx.Adobe.com/in/contact.html?step=CCSN_adobe-ID-signing-in_stillNeedHelp

  (Double post)

  Concerning

  Megha Rawat

• How to encrypt information as customer credit card information?

  Hi, I would like to know what is the safe way to add a credit card for my clients information form, without compromising their information? We'RE Adobe Muse

  Hi Veronica,.

  If you choose to host the site on Business Catalyst, you can take advantage of the features Ecommerce from British Colombia to achieve what you are looking for, for more information, please visit the following link Catalyst Business help | E-commerce site

  Kind regards

  Aish

• Custom VM information

  Hi guys, I am looking to get some information customized for the virtual machines.

  Basically, I'm looking for commands that will provide me with all the information contained in get - vm | Get-VMResourceConfiguration as a table with columns (not the list that is currently provided by this servlet) but with the number of CPUS that are included in the returned data.

  I know that each virtual machine has a number of properties that are part of its purpose, but I just can't get my head around access and the list at will.

  Help is greatly appreciated!

  Thank you

  You can use the Add-Member cmdlet to add properties to an object.

  You can do something like this

  $report = foreach($vm in Get-VM){
      Get-VMResourceConfiguration -VM $vm | `    Add-Member -Name PowerState -Value $vm.Powerstate -MemberType NoteProperty -PassThru | `    Add-Member -Name CpuCount -Value $vm.NumCpu -MemberType NoteProperty -PassThru}
  $report | Select VM,PowerState,CpuCount,NumCpuShares,CpuSharesLevel,NumMemShares,MemSharesLevel | ft -AutoSize
  

  Since you do not specify the properties of Get-VMResourceConfiguration you want to display, I took the default value.

  But this can easily be changed, just update the cmdlet Select.

• Cannot display calendar information

  Hi guys
  
  I created a calendar using physical agent, but it gives an error Impossible to retrieve the agent schedule.
  
  Steps taken
  
  1 has created a windows service using agentservice.bat-i s PHYSICAL_AGENT 20910.
  2. has created a calendar.
  3 tested the physical topology Manager agent.
  4. right click on physical and set agent to update the calendar.
  
  Now, when I check the view calendar, it gives me an error cannot display calendar information.
  I can find an old scenario at the request of any annex which is not in all scenarios.
  
  Concerning
  Frank
  
  Published by: user1137989 on July 5, 2011 11:29

  Hi Jos,

  Agent of service look / just create planning information in the rest of work regardless of the u has updated / specified in ODIPARAMS. ODI_SECU_WORK_REP of the bat.

  So you must make sure in ODI_SECU_WORK_REP his spikes to rest correct work where u really want to look for, otherwise you must drop the updated file agent and create.

  Makes sense?

  Thank you
  Guru

• Is there a way to get programmatic access to political information for flash access?

  Looking for just the information above for purposes of test automation.

  Thank you.

  Hello

  In fact, 'policies' that can be retrieved from DRMVoucher are simply "custom properties" and "rights custom" that can be set in the license server.  Please see the following Javadocs 'ApplicationDefinedRight' and 'ApplicationProperties '.

  ApplicationDefinedRight: http://help.adobe.com/en_US/flashaccess/2.0/javadocs/com/adobe/flashaccess/sdk/rights/Appl icationDefinedRight.html

  ApplicationProperties: http://help.adobe.com/en_US/flashaccess/2.0/javadocs/com/adobe/flashaccess/sdk/util/Applic ationProperties.html

  These are personalized (not defined by Flash Access) properties and rights that the customer can choose to implement and apply in their application.  For example, Flash Access currently has only one right, called "Playwright", with several constraints, attached to the right, as the Expiration, OutputProtection, PlaybackWindow, etc...  If the customer finds the need for a law, not supported by FlashAccess, like "AllowCopyToProtectedFlashCard", and then you set your own "ApplicationDefinedRight".

  Don't go back to your question - there is no way to analyze the political content of Flash Access programmatically (via AS3).  The thing the closest it would be to analyze the content of the license, once the license server issues a license (see DRMVoucher methods).  The only downside is that while licensing issues Flash access Reference Implementation server exactly as specified in the policy, there is no guarantee that the content distributor has not change the code of the license server to change some rights and restrictions (because of business rules), licensed to result emitted which does not correspond to the original font.

  see you soon,

  / Eric.

• Informational message when the user clicks on a word not related index

  I was looking at the index information in tips and trix (by RoboWizard) and I noticed if I clicked on a position index that was not that I received an informational message tells me to click on a subtopic below the title of index linked. How to make that happen in my help file?  Is it easy to do or to learn for a beginner?

  It's as simple as not having all the topics assigned to the keyword. Example, if you have a keyword of the project and a subkeyword of Create, add topics to the subword of create. When you display help, click Project dets message you describe.