Comments account shows as not secure...

Similar Questions

• Guest account is not "secure".

  I have an E-1000 router. It works very well. With the help of Cisco connect, I put a guest with a password account. When I search "wireless networks", in addition to various neighboring systems, I see my account with a 'padlock' indicating that it is password protected and my guest... account but there not a padlock icon. With the help of Cisco Connect, I checked and re-checked the guest account has a password. In fact, at Cisco Connect it said "customers can log in using the password... ». Why no padlock icon? Is it because I'm just checking the "wireless networks" on a computer that is connected to the account main linksys so it "knows" that I have to join the guest account? Thank you.

  I have an E-1000 router. It works very well. With the help of Cisco connect, I put a guest with a password account. When I search "wireless networks", in addition to various neighboring systems, I see my account with a 'padlock' indicating that it is password protected and my guest... account but there not a padlock icon. With the help of Cisco Connect, I checked and re-checked the guest account has a password. In fact, at Cisco Connect it said "customers can log in using the password... ». Why no padlock icon? Is it because I'm just checking the "wireless networks" on a computer that is connected to the account main linksys so it "knows" that I have to join the guest account? Thank you.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  stefanmaine,

  The guest network use https security type. If you tried to connect to your network of comments, you would be able to connect automatically, however you can not open all Web sites without having to enter the password in the comments. The guest network is used for temporary visitors to use.

  This link can help answer your questions about the guest network: http://kb.linksys.com/Linksys/GetArticle.aspx?docid=f35bd58fda4148929ac482f3c7968e04_Guest_Network_F...

• How can I connect to my firefox sync account? When I press 'Sign in', it shows me a security code, what should I input on another device, but I need to synchronize this device.

  When I press 'Sign in', it shows me a security code, what should I input on another device, but I need to synchronize this device.

  I also had this problem until I deleted my sync account in the site and created again.

• a program called security shield keeps asking me to activate an account I did not ask or like it.

  a program called security shield keeps asking me to activate an account I did not ask or like it. I can't remove it, it seems to be getting worse it won't let me in the control panel or regedit to remove it, said I have viruses in there. a search on the internet for security shield has led me to pcsecurity

  a program called security shield keeps asking me to activate an account I did not ask or like it. I can't remove it, it seems to be getting worse it won't let me in the control panel or regedit to remove it, said I have viruses in there. a search on the internet for security shield has led me to pcsecurity

  Restart the computer in safe mode with network. Click the second link below and download Malwarebytes. Update Malwarebytes and perform a full scan. Choose to quarantine found nothing. Once complete, click the third link below and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

  How to start in safe mode

  Malwarebytes.org

  Superantispy-portable

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• map memory in wireless network shows do not in a single account

  Hi - I have an Epson SX515SW printer, which is on a wireless network. I run Vista 32-bit SP2. This problem is produced only since I provided an image my Toshiba laptop after 2 years & had my single BSOD (due to conflicts between pieces of AV s/w, left for account).

  The printer is a multifunction device & includes a card reader. I have 2 accounts on the machine. We (call it account A) sees the reader without the need to re - map & so is end, the second (call it account B) do not see without having to map the drive (& yes I know I can get it to reconnect to the opening but I'd rather work as it should).
  In both accounts, I can print OK, the only thing I've noticed is that sometimes when starting the laptop or the other account, if I shoot to the top of the network view, sometimes I get a message saying that network discovery is turned off (it is not) & seems to think that it is a public network rather private whoever it is. If I go to the center of network share among the down sweater that shows this error, everything is fine. Network of the discovery shows that on & network type as private. I am connected to a Superhub of blank media (which is a Netgear VMDG280).
  The other two computers from the House (one is Win7 & XP) see the drive without any problems.
  While this is not critical, I really want to get this working as it should really.
  TIA

  OK issued resolved but I don't know why!

  Do as I said in my last post. Uninstalled the account I used to install the Epson s/w. Then I reinstalled on the account that I have had the problem.
  All right. I see the memory card in * the * accounts without having to resort to a drive mapping. But what precisely could hurt that I wonder?

• I bought the app composition unique creative cloud for acrobat.  When I log into my account it does not show that I bought.  How can I get the download to work without buying again.  I have a receipt for my purchase.

  I bought the app composition unique creative cloud for acrobat.  When I log into my account it does not show that I bought.  How can I download this product without buying it again.  I received my purchase.

  Hello

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• A license transfer is possible for me to do? I don't have access to my original account and have a new account which does not show buying CS6. I need to my SR # to re - install on a new computor.

  I don't have access to my original account and have a new account which does not show buying CS6. I need to my SR # to re - install on a new computor.

  I've been frustrated by my efforts in the past and cannot find this purchase which I have a copy in front of me now, in my online account information.

  You can try saving your old product in your new account. Should he be rejected because you do not have your serial number or headquartered in your old account you can no longer access. You may need this evidence to deal with Adobe customer service... This document you may be what is needed.  Your serial number was on the cover of the DVD on a sticker glued on.

• Old computer with Photoshop is dead, had to buy a new computer.  How to install this on the new computer?  I do not have a disk, I bought online.  I looked in my account shows, I bought it, but don't see an option for installation.

  I do not have a disk, I bought online.  I looked in my account shows, I bought it, but don't see an option for installation.

  You can do so here:

  Download Photoshop Elements products | 10, 11, 12, 13

• module_data resource = "zonecustomers"... shows no not all secure areas supported

  I use the following configuration of module_data on the front-end of my site:

  {module_data resources = "zonecustomers" version = "v3" field = "customerId, zoneId, siteId, createDate, showed, secureZone, customer" resourceId = "10756984" skip = limit '0' = '10' = 'zone ID' order collection = "mySZData1" "}

  The referenced client (ResourceID = "10756984") subscribes to the two zones, but this module is only to show a.

  If the customer unsubscribe to a secure area so this module shows the other zone and vice versa.

  According to the documentation, this module configuration should should show all the secure areas, the Customer subscribes to--or do me something wrong?

  The developer reference

  Is it possible to get all the secure areas purchased for a specific customer (if they are not connected)?

  Hi Adam,.

  Try this code and let me know if it works-

  {"{module_data resource ="zonecustomers"version ="v3"field ="customerId, IDZone, customer"skip ="0"limit ="10"where="\{'customer.id':'10756984'\} "order = 'zone ID' collection ="myData"}

  {{ myData | json}}

  Let me know how it goes.

  - Abhishek Maurya

• I can't activate the apps on my desktop and my account shows no subscription (which I did not)

  I can't activate the apps on my desktop and my account shows no subscription (which I did not)

  Me here, talked with the cat and I was using the wrong ID. Adobe Duh!

• messages not showing is not on all devices

  I have two computers and a smart phone, I use sometimes to check my email. I had messages download and see on a device and not on the other. I thought since it's an account they go on all messaging devices.

  Depends on the question of if you have set up your Thunderbird e-mail accounts to use IMAP or pop.

  If POP, then Thunderbird can only access and download from the server Inbox. It is normal to remove the copy from the server after download.
  So this means that if you access this account on another device or via webmail address, then the e-mails that you have downloaded will not be on the server, so you don't see them.

  Stop this is to make sure the email POP account to leave a copy on the server after download.
  Tools > account settings > server for pop e-mail account settings
  or
  Right-click on mailaccount pop in the folders pane, and then select "settings".
  then select "Server settings" for the pop email account.
  Select 'leave messages on the server.
  Click OK

  Please note that all emails you send will be only stored in Thunderbird, so you can not see the server. E-mails deleted in thunderbird has no effect on the e-mails still on the server, except if you have enabled this option in the server settings.

  Alternative, is to create email IMAP accounts.
  IMAP e-mail accounts show a remote view of the files on the server.
  you subscribe to view these folders.
  If you delete an email in a Thunderbird imap email account, then it is deleted on the server that the files are indeed, a same. Thus, other devices to connect to the server will not see email which has been deleted.

• Connection to Firefox Sync does not work due to "SecurityError: the operation is not secure.

  Hello everyone,

  I wanted to update my Firefox Sync account from the old to the new version. Unfortunately, the login page does not load on my laptop. On my Android devices, everything works fine, so I could already put in place the new account from there, I just can not connect to my new account sync on my laptop. I use Firefox on Windows 8.1 Pro 64 bit 33.1.

  The subject: represents the loading of the landing page as usual, but by clicking on the button connect does not load the login form, just blank white box. I asked my dear friend Google who gave me some answers (seems to be a common problem...), but none of them helped me.

  The debug console displays the error "SecurityError: the operation is not secure" directly after loading on: accounts? action = signin. Opening of https://accounts.firefox.com/signin and https://accounts.firefox.com/signup also results in the same error and an empty box white. https://accounts.Firefox.com/legal/privacy works fine as usual.

  I have not found a solution to work around this SecurityError so far.

  I found another answer which finally solved my problem! Apparently the subject: in the page accounts raise this error because I configured Firefox always ask before accepting a cookie. https://github.com/Mozilla/FXa-content-server/issues/1857

  Even when weird things, but now I have to work around him.

• purchase of my iPhone - how to credit my account Bank and not use credit card

  Help... I would like to make purchases using my phone.  I have a balance of store that I would use to pay for my purchases and not my credit card.  How to do that?

  If your iTunes account shows a credit balance, you are connected with this Apple ID, then it must deduct that balance before the credit card.

• No account showing

  When I select the control panel user accounts, it is empty, no account showing, not even mine

  This finish caused by some .dll which had to be re-registered. Once I did, the user accounts appear now.

• Feedback site is not secure

  When I scan for available networks, my feedback site indicates that the site is not guaranteed.  I assigned a password but the site is not secure and a password is not necessary.

  Feedback network is not secure, and anyone can connect to the Guest network. But they cannot access the Internet without a password. So, there is a password to access the Internet by using the network of comments.

  If you want to, you can disable the guest network also using the Cisco connect software.

  Follow this link for the guest only network configuring Internet access.